DBB01CM24

## **Timers True delay on release Types DBB01, PBB01** 

- **Time range 0.1 to 600 s - capacitor powered** 

- **4 time ranges selectable by DIP-switches** 

- **Knob-adjustable time setting** 

- **Automatic start after drop-out of power supply** 

- **Repeatability:** ≤ **0.2%** 

- **Output: 8 A SPDT or 8 A DPDT relay** 

- **For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in** 

- **22.5 mm Euronorm or 36 mm Plug-in module housing** 

- **Combined AC and DC power supply** 

**• LED indication for power supply ON** 

**DBB01 PBB01** 

**Product Description Ordering key DBB 01 C M24** Multi voltage true delay on For mounting on DIN-rail **Housing** release timer with 4 time (DBB01) or Plug-in (PBB01). **Function** ranges from 0.1 to 600 s **Type** selectable by DIP-switches. **Item number Output Power Supply T e Selection yp** ~~oe~~ **Mounting Output Housing Supply: 12 to 24 VDC Supply: 24 to 240 VAC/DC** For DIN-rail SPDT D - Housing **DBB 01 C 724 DBB 01 C M24** DPDT D - Housing **DBB 01 D 724 DBB 01 D M24** Plug-in SPDT P - Housing **PBB 01 C 724 PBB 01 C M24** DPDT P - Housing **PBB 01 D 724 PBB 01 D M24 Time S ecifications Out ut S ecifications p p p Time ranges Output** SPDT or DPDT relay Selectable by DIP-switches 0.1 to 1 s **Rated insulation voltage** 250 VAC (RMS) 1 to 10 s 6 to 60 s **Contact Ratings** (AgNi) µ Resistive loads AC 1 8 A @ 250 VAC 60 to 600 s DC 12 5 A  @  24 VDC **Repeatability** ≤ 0.2% Small inductive loads AC 15 2.5 A  @  250 VAC **Time variation** DC 13 2.5 A  @  24 VDC Within rated power supply ≤ 0.05% **Mechanical life** ≥ 2 x 106 operations Within ambient temperature ≤ 0.2% **Electrical life** AC1 ≥ 105 operations **Reset** Power supply applied (at max load) for min. 200 ms ~~—~~ **Operating frequency** < 3600 operations / h **Su l S ecifications Dielectric strength pp y p** Dielectric voltage 2 kVAC (RMS) **Power supply** Overvoltage cat. III Rated impulse withstand Rated operational voltage (IEC 60664, IEC 60038) voltage 4 kV (1.2/50µs) through terminals: (DBB01...M24) A1, A2 24 to 240 VAC/DC (PBB01...M24) 2, 10 +10% -15%, 45 to 65 Hz (DBB01...724) A1, A2 12 to 24 VDC (PBB01...724) 2, 10 +15% -10% **Voltage interruption** ≤ 40 ms **Rated operational power** AC supply: 2.2 VA DC supply: 0.6 W 

**1** 

Specifications are subject to change without notice (15.04.10) 

**DBB01, PBB01** 

## **General S ecifications p** 

|**Power ON delay**||≤200 ms|
|---|---|---|
|**Power OFF delay**||≤100 ms|
|**Indication for**|||
|Power supplyON||LED, green|
|**Environment**||(EN 60529)|
|Degree of protection||IP 20|
|Pollution degree||3 (DBB01), 2 (PBB01)|
|||(IEC 60664)|
|Operating temperature||-20 to 60 °C, R.H. < 95%|
|Storage temperature||-30 to 80 °C,R.H. < 95%|
|**Housing**|||
|Dimensions|DBB01|22.5 x 80 x 99.5 mm|
||PBB01|36 x 80 x 94 mm|
|**Weight**||Approx 120g|
|**Screw terminals**||(DBB01)|
|Tightening torque||Max 0.5 Nm according to|
|||IEC EN 60947|
|**Approval**||UL (except 724)|
|||CSA(except 724)|
|**CE Marking**||Yes|
|**EMC**||Electromagnetic Compatibility|
|Immunity||According to EN 61000-6-2|
|Emission||Accordingto EN 61000-6-3|
|**Timer Specifications**||According to EN 61812-1|



## **Mode of O eration p** 

When the power supply is **Note:** applied the relay operates. DBB01, PBB01 should not When the power supply is be operated by pulses interrupted the time period shorter than 200 ms. starts and, at the end of the For these purposes the set time period, the relay relays DMB01 or PMB01, releases. operated by external conIf power supply is reapplied tact function, should be before the realy releases the used. time is reset and the relay remains ON. 

## **Range/Time Setting** 

Adjust the time range set- **Centre knob:** ting the DIP-switches 1 and Time setting on relative 2 as shown below. scale: 1 to 10 with respect To access the DIP-switches to the chosen range. open the plastic cover using a screwdriver as shown below. 

**Time range** OFF ON OFF OFF: 0.1 to 1 s ON OFF ON ON: 1 to 10 s ON ON ON OFF: 6 to 60 s OFF OFF OFF ON: 60 to 600 s 

## **O eration Dia ram p g** 

ON OFF 

## **Wiring Diagrams** 

## **DBB01** 

**==> picture [29 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
PBB01<br>**----- End of picture text -----**<br>


**2** 

Specifications are subject to change without notice (15.04.10) 

**DBB01, PBB01** 

## **Dimensions** 

**==> picture [500 x 169] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIN-rail Plug-in<br>22.5 94<br>99.5<br>36 90<br>28.5 28.5<br>80 83.5 63 80 63<br>**----- End of picture text -----**<br>


**3** 

Specifications are subject to change without notice (15.04.10)