DAA01DM24

## **Timers Delay on Operate Type DAA01, PAA01** 

- **Time range 0.1 s to 100 h** 

- **Knob selection of time range** 

- **Knob adjustable time setting** 

- **Automatic start** 

- **Repeatability:** ≤ **0.2%** 

- **Output: 8 A SPDT or 2 x 8 A SPDT relays** 

- **For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in** 

- **22.5 Euronorm or 36 mm plug-in module housing** 

- **Combined AC and DC power supply** 

- **LED indication for relay status and power supply ON** 

**DAA01 PAA01 Product Description Ordering Key DAA 01 C M24** Multi-voltage delay on oper100 h. For mounting on DIN- **Housing** ate timer with 7 selectable rail (DAA01) or plug-in **Function** time ranges within 0.1 s and (PAA01). **Type Item number Output** ~~ey~~ **Power supply T e Selection yp Mounting Output Housing Supply: 24 VDC and 24 to 240 VAC Supply: 24 to 240 VAC/DC** DIN-rail 1 x SPDT D-Housing **DAA01CM24** 2 x SPDT **DAA01DM24** Plug-in 1 x SPDT P-Housing **PAA01CM24** 2 x SPDT **PAA01DM24** 

## **Time S ecifications p** 

|**Time ranges**||
|---|---|
|Knob selectable|0.1 to 1 s<br>1<br>to 10 s<br>6<br>to 60 s<br>60 to 600 s<br>0.1 to 1 h<br>1<br>to 10 h<br>10 to 100 h|
|**Setting accuracy**<br>**Repeatability**<br>**Time variation**<br>Within rated power supply|≤5%<br>≤0.2%<br>≤0.05%/V|
|Within ambient temperature<br>**Reset**<br>Power supply interruption|≤0.2%/°C<br>≥200 ms|
|**Supply Specifications**||
|**Power supply**<br>Rated operational voltage<br>through terminals:<br>(DAA01C)<br>A1, A2 or<br>(PAA01C)<br>2, 10<br>(DAA01D)<br>A1, A2 or<br>(PAA01D)<br>2, 10|Overvoltage cat. III<br>(IEC 60664, IEC 60038)<br>24 VDC ± 15% and<br>24 to 240 VAC + 10% -15%,<br>45 to 65 Hz<br>24 to 240 VAC/DC<br>+ 10% - 15%,<br>45 to 65 Hz<br>~~=~~|



## **Out ut S ecifications p p** 

|**Output**||1 or 2 x SPDT relays|
|---|---|---|
|**Rated insulation voltage**||250 VAC(rms)|
|**Contact Ratings**(AgSnO2)||µ|
|Resistive loads|AC 1|8 A @ 250 VAC|
||DC 12|5 A @ 24 VDC|
|Small inductive loads|AC 15|2.5 A @ 250 VAC|
||DC 13|2.5 A @ 24 VDC|
|**Mechanical life**||≥30 x 106 operations|
|**Electrical life**||≥105 operations|
|||(at 8 A, 250 V, cosϕ= 1)|
|**Operating frequency**||< 7200 operations/h|
|**Dielectric strength**|||
|Dielectric voltage||2 kVAC (rms)|
|Rated impulse withstand|||
|voltage||4 kV (1.2/50 µs)|



|**Voltage interruption**|≤10 ms|
|---|---|
|**Rated operational power**||
|AC supply|4 VA|
|DC supply|1.5 W|



**1** 

Specifications are subject to change without notice (14.03.07) 

**DAA01, PAA01** 

## **General S ecifications p** 

|**Power ON delay**<br>Reaction time<br>Instantaneous contact<br>**Indication for**<br>Power supply ON<br>Output relays ON|**Power ON delay**<br>Reaction time<br>Instantaneous contact<br>**Indication for**<br>Power supply ON<br>Output relays ON|≤100 ms<br>< 20 ms frompower ON<br>LED, green<br>LED, yellow<br>(flashingwhen timing)|
|---|---|---|
|**Environment**||(EN 60529)|
|Degree of protection||IP 20|
|Pollution degree||3 (DAA01), 2 (PAA01)|
|||(IEC 60664)|
|Operating temperature||-20° to +60°C, R.H. < 95%|
|Storage temperature||-30° to +80°C,R.H. < 95%|
|**Housing**|||
|Dimensions|DAA01|22.5 x 80 x 99.5 mm|
||PAA01|36 x 80 x 94 mm|
|**Weight**||Approx. 130g|
|**Screw terminals**(DAA01)|||
|Tightening torque||Max. 0.5 Nm according to|
|||IEC EN 60947|
|**Approvals**||UL, CSA|
|||RINA(DAA01 only)|
|**CE marking**<br>**EMC**<br>Immunity||Yes<br>Electromagnetic Compatibillity<br>According to EN 61000-6-2|
|Emission||Accordingto EN 61000-6-3|
|**Timer Specifications**||According to EN 61812-1|



## **Mode of O eration p** 

The yellow LED, flashing when timing, is ON as soon as the relay turns ON. 

is connected. At the end of the set delay the relay operates and does not release until the power supply is interrupted for at least 200 ms. If the power supply is interrupted for at least 200 ms before the relay operates the time is set to zero and the circuit is ready for a new time period. 

The second relay can operate as instantaneous or delayed changeover contact. The selection is made by a DIPswitch placed under the plastic door on the device’s front. 

The set delay period begins as soon as the power supply 

## **Time Settin g** 

**Centre knob:** 

## **Lower knob:** 

Time setting on relative Setting of time range scale: 1 to 10 with respect to the chosen range 

## **O eratin Dia ram p g g** 

|Powersupply<br>Relay1<br>Relay2<br>(Delayed)<br>Relay2<br>(Istantaneous)<br>LED<br>ON<br>OFF<br>ON<br>OFF<br>ON<br>OFF||||||||||
|---|---|---|---|---|---|---|---|---|---|
|||||||||||
||T|||||||||
|||||||||||
||T|||||||||
|||||||||||
|||||||||||
|||||||||||
|||||||||||
|||||||||||
|||||||||||



## **Wiring Diagrams** 

**==> picture [245 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
DAA01<br>L(+) � �<br>A1 16 18 26 28<br>A2 15 25<br>DAA01C... DAA01D...<br>DAA01D...<br>N(-)<br>**----- End of picture text -----**<br>


**==> picture [245 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
PAA01<br>L(+) � �<br>2 4 3 8 9<br>10 1 11<br>PAA01C... PAA01D...<br>PAA01D...<br>N(-)<br>**----- End of picture text -----**<br>


**2** 

Specifications are subject to change without notice (14.03.07) 

**DAA01, PAA01** 

## **Dimensions** 

**==> picture [500 x 179] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIN-rail Plug-in<br>22.5 94<br>99.5<br>36 90<br>28.5 28.5<br>80 83.5 63 80 63<br>**----- End of picture text -----**<br>


**3** 

Specifications are subject to change without notice (14.03.07)