CLC175US24-M

**175 Watts** 

xppower.com 

## **CLC Series** 

- High Efficiency Resonant Topology 

- Medical Safety Approvals (-M Versions) 

- 12 V Fan Output 

- Remote Sense 

- 5V Standby Option 

- Remote On/Off & Power Good Signal Options 

- 3 Year Warranty 

## ~~**Specification**~~ 

## **Input** 

- Input Voltage • 85-264 VAC (120-370 VDC), derate output power 10% <90 VAC 

- Input Frequency • 47-63 Hz Input Current • 3.0 A typical at 115 VAC, full load 1.5 A typical at 230 VAC, full load 

- Inrush Current • 40 A max at 230 VAC, cold start at 25 °C Power Factor • EN61000-3-2, class A Earth Leakage Current • 475 μ A 264 VAC at 60 Hz, 230 μ A maximum at 264 VAC at 60 Hz (-M) 

- Input Protection • Internal T5 A 250 V fuse in line Internal T5 A 250 V fuse in line and neutral (-M) 

- **Output put ut** Output Voltage • 12-48 V (see tables) Output Voltage Trim • ±5% Initial Set Accuracy • ±1% V1, ±5% V2, ±3% V3 Minimum Load • 0.1 A required on V1 to maintain regulation of V2 

- Start Up Delay • 1.5 s typical, see longform datasheet for more details 

- Start Up Rise Time • 5 ms typical Hold Up Time • 16 ms min at 115 VAC Drift • ±0.2% after 20 min warm up Line Regulation • ±0.5% max Load Regulation • ±1% V1, ±5% V2 & V3 max Over/Undershoot • 5% typical Transient Response • 4% max. deviation, recovery to within 1% in 500 μ s for a 50-75-50% load change 

- Ripple & Noise • 1% pk-pk V1, others 2%, 20 MHz bandwidth 

- Overvoltage Protection • 115-140% Vnom, recycle input to reset Overload Protection • 110-150% V1 only Short Circuit Protection • Continuous trip and restart (hiccup mode) Temperature • 0.05%/°C Coefficient Remote Sense • Compensates for 0.5 V total voltage drop Remote On/Off • Uncommitted isolated optocoupler diode, (Inhibit/Enable) powered diode inhibits V1 & V2 (Option -A) 

## **Output put ut** 

## **General** 

- Efficiency • 87% typical Isolation • 3000 VAC Input to Output 4000 VAC Input to Output (-M) 2 x MOPP 1500 VAC Input to Ground 1 x MOPP 500 VAC Output to Ground 

- Switching Frequency • 70 kHz typical Signals (Option -A) • Power OK - open collector, Remote On/Off, 5 V Standby 

- MTBF • 390 kHrs per MIL-HDBK-217F at 25 °C, GB 

- Power Density • 9.0 W/in[3] 

## **Environmental** 

- Operating Temperature • 0 °C to +70 °C derate linearly from +50 °C at 2.5%/°C to 50% load at +70 °C 

- Cooling • Forced-cooled >10 CFM Operating Humidity • 95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3000 m Shock • 30 g pk, half sine, 6 axes Vibration • 2 g rms, 5 Hz to 500 Hz, 3 axes 

## **EMC & Safety** 

|**EMC & Safetyy**||
|---|---|
|Low Voltage PSU EMC <br>Emissions|• EN61204-3, high severity level<br>• EN55011/32 level B conducted|
||EN55011/32 level A radiated|
|Harmonic Currents|• EN61000-3-2, class A|
|Voltage Flicker|• EN61000-3-3|
|Radiated Immunity|• EN61000-4-3, level 3 Perf Criteria A|
|EFT/Burst<br>Surge|• EN61000-4-4, level 3 Perf Criteria A<br>• EN61000-4-5, installation class 3<br>Perf Criteria A|
|Conducted Immunity<br>Dips & Interruptions|• EN61000-4-6, level 3 Perf Criteria A<br>• EN61000-4-11 , 30% 10 ms, 60% 100 ms,<br>100% 5000 ms Perf Criteria A, B, B|
||EN60601-1, 30% 500ms, 60% 100ms,|
||100% 10ms, 100% 5000ms (-M)<br>Perf Criteria A, A (with 50% load), A, B|
|Safety Approvals|• EN60601-1, ANSI/AAMI ES60601-1,<br>CSA22.2 No.60601-1 per cUL, Including<br>Risk Management, IEC60950-1:2005 Ed 2<br>/ IEC62368-1:2014|
||UL 62368-1 & CAN/CSA C22.2 No. 62368-|
||1-14, EN62368-1:2014/A11:2017, CE &|
||UKCA meets all applicable directives &|
||legislation.|



**CLC175** 

## ~~**Models and Ratings**~~ 

|Output Power(1)|Output Voltage V1<br>Output Current V1|Output Current V1|Fan Output<br>V2|Standby Supply<br>V3 (optional)|Model Number(2,3)|
|---|---|---|---|---|---|
|175 W|12.0 VDC|13.90 A|12.0 V/0.5 A|5.0 V/0.5 A|CLC175US12|
|175 W|24.0 VDC|6.90 A|12.0 V/0.5 A|5.0 V/0.5 A|CLC175US24|
|175 W|28.0 VDC|6.25 A|12.0 V/0.5 A|5.0 V/0.5 A|CLC175US28<br>(5)|
|175 W|48.0 VDC|3.50 A|12.0 V/0.5 A|5.0 V/0.5 A|CLC175US48|



## ~~**Notes**~~ 

_1. 10 CFM airflow._ 

_2. For medical version add, suffix ‘-M’ to model number._ 

_3. For 5 V standby (V3), Power OK & Inhibit, add suffix ‘-A’ to model number._ 

_4. For cover with Top Fan assembly add ‘-TF’ to model number e.g. CLC175US12-TF, CLC175US12-ATF, CLC175US12-MTF or CLC175US12-MATF._ 

_5. Not available for -A or -M._ 

## ~~**Mechanical Details**~~ 

5.00 (127.0) 0.22 (5.7) 4.55 (115.6) 1.30 (33.0) 0.20 (5.1) In put Connector J1 Pin 1 Line Pin 2 Neutral 0.25”Faston Earth | ~~fao~~ l C . © ~~=: : =Al~~ | ~~rr~~ 3.00 J1 mates with Molex housing (76.2) 2.50 09-50-1031 and Molex series 1.90 2.55 (63.6) 5194 crimp terminals. (48.3) (64.8) 1.11 0.61 (28.3) (15.6) Output Connector J2 Pin 1 +V1 0.23 (5.7) 0.19 (4.8) Pin 2 +V1 0.20 (5.1) 0.25 FastonGround Tab V Adj. 0.14(3.5) SMD component height Pin 3Pin 4 +V1+V1 4 x ø0.156 (3.96) Mounting Holes Pin 5 RTN ø0.312 (7.92) Clearance Top & Bottom ~~tt~~ 0.18(4.6) Pin 6 RTN Pin 7 RTN **Fan Cover** | | ~~el~~ 5.50 (139.7) ~~“~~ = | el ~~_~~ Pin 8 RTN ~~eeee~~ J2 mates with Molex housing 09-50-1081 and Molex series 5194 crimp terminals. Input Connector (88.9)3.50 Signal Connector J3 Pin 1 +5V Standby Pin 2 Logic GND Pin 3 Logic GND Faston Ground Terminal0.25 (0.6) ~~o~~ s) Output Connector Pin 4 Power OK Pin 5 Inhibit HI Pin 6 Inhibit LO Pin 7 +Sense Pin 8 -Sense Pin 9 +Vout 2.00 (50.7) Pin 10 -Vout J3 mates with JST housing PHDR-10VS and JST SPHD- ~~0)~~ | ~~aa |~~ 001T-P0.5 crimp terminals. 4 x M3 x 0.5 THD 0.16 (4.0) Max Screw ~~as :~~ Penetration Fan Connector J4 1.97 Pin 1 Fan +(12V) (50.0) Pin 2 Fan - J4 mates with Molex housing > ~~—~~ & 0.77 (19.5) 22-01-1024 and Molex series 5103 crimp terminals. ~~7~~ 0.39 (9.9) ~~|~~ 4.724 (120.0) ~~**Notes**~~ 2 x M3 x 0.5 THD 1. All dimensions in inches (mm). 0.16 (4.0) Max ScrewPenetration 0.98 (25.0) Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 2. Weight: 0.7 lbs (317 g) approx. 3. For thermal derating, please ~~=a~~ refer to longform datasheet. 0.39 (9.9) 4.72 (120.0) 

26 July 2022