CLC175US12.

POWER SUPPLY, AC-DC, MEDICAL, 12V, 13.9A

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: XP POWER
Product type: AC / DC Open Frame Power Supplies
Power Supply Applications:ITE; No. of Outputs:1 Output; Power Rating (Forced Cooling):175W @ 10CFM; Power Rating (Convection Cooling):-; Input Voltage VAC:85V 04R8364
SVHC: No SVHC (15-Jan-2018)
Product Range: CLC Series
No. of Outputs: 1 Output
Input Voltage VAC: 85V AC to 264V AC
Power Supply Output Type: Adjustable, Fixed
Output Current - Output 1: 13.9A
Output Current - Output 2: -
Output Current - Output 3: -
Output Current - Output 4: -
Output Voltage - Output 1: 12V
Output Voltage - Output 2: -
Output Voltage - Output 3: -
Output Voltage - Output 4: -
Power Supply Applications: ITE
Power Rating (Forced Cooling): 175W @ 10CFM
Power Rating (Convection Cooling): -

Delivery and price
Units per pack	100
Price	117.89 €
Current stock	200+
Lead time	30 days

Datasheet

**175 Watts** ~~XP~~ xppower.com ~~|~~ **CLC Series** 

- High Efficiency Resonant Topology 

- Medical Safety Approvals (-M Versions) 

- 12 V Fan Output 

- Remote Sense 

- 5V Standby Option 

- Remote On/Off & Power Good Signal Options 

- 3 Year Warranty 

## ~~**Specification**~~ 

## **Input** 

- Input Voltage • 85-264 VAC (120-370 VDC), derate output power 10% <90 VAC 

- Input Frequency • 47-63 Hz Input Current • 3.0 A typical at 115 VAC, full load 1.5 A typical at 230 VAC, full load 

- Inrush Current • 40 A max at 230 VAC, cold start at 25 °C Power Factor • EN61000-3-2, class A Earth Leakage Current • 475 µA 264 VAC at 60 Hz, 230 µA maximum at 264 VAC at 60 Hz (-M) 

- Input Protection • Internal T5 A 250 V fuse in line Internal T5 A 250 V fuse in line and neutral (-M) 

- **Outputputut** Output Voltage • 12-48 V (see tables) Output Voltage Trim • ±5% Initial Set Accuracy • ±1% V1, ±5% V2, ±3% V3 Minimum Load • 0.1 A required on V1 to maintain regulation of V2 

- Start Up Delay • 1.5 s typical, see longform datasheet for more details 

- Start Up Rise Time • 5 ms typical Hold Up Time • 16 ms min at 115 VAC Drift • ±0.2% after 20 min warm up Line Regulation • ±0.5% max Load Regulation • ±1% V1, ±5% V2 & V3 max Over/Undershoot • 5% typical Transient Response • 4% max. deviation, recovery to within 1% in 500 µs for a 50-75-50% load change 

- Ripple & Noise • 1% pk-pk V1, others 2%, 20 MHz bandwidth 

- Overvoltage Protection • 115-140% Vnom, recycle input to reset Overload Protection • 110-150% V1 only Short Circuit Protection • Continuous trip and restart (hiccup mode) Temperature • 0.05%/°C Coefficient Remote Sense • Compensates for 0.5 V total voltage drop Remote On/Off • Uncommitted isolated optocoupler diode, (Inhibit/Enable) powered diode inhibits V1 & V2 (Option -A) 

## **Outputputut** 

## **General** 

|**General**||
|---|---|
|Efficiency|• 87% typical|
|Isolation|• 3000 VAC Input to Output|
||4000 VAC Input to Output (-M) 2 x MOPP|
||1500 VAC Input to Ground 1 x MOPP|
||500 VAC Output to Ground|
|Switching Frequency|• 70 kHz typical|
|Signals (Option -A)|• Power OK - open collector,|
||Remote On/Off, 5 V Standby|
|MTBF|• 390 kHrs per MIL-HDBK-217F|
||at 25 °C, GB|
|Power Density|• 9.0 W/in3|



## **Environmental** 

|**Environmental**||
|---|---|
|Operating Temperature|• 0 °C to +70 °C derate linearly from +50 °C|
||at 2.5%/°C to 50% load at +70 °C|
|Cooling|• Forced-cooled >10 CFM|
|Operating Humidity|• 95% RH, non-condensing|
|Storage Temperature|• -40 °C to +85 °C|
|Operating Altitude|• 3000 m|
|Shock<br>Vibration|• 30 g pk, half sine, 6 axes<br>• 2 g rms, 5 Hz to 500 Hz, 3 axes|



## **EMC & Safety** 

- Low Voltage PSU EMC • EN61204-3, high severity level Emissions • EN55011/22 level B conducted EN55011/22 level A radiated 

- Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Surge • EN61000-4-5, installation class 3 Perf Criteria A 

- Conducted Immunity • EN61000-4-6, level 3 Perf Criteria A Dips & Interruptions • EN61000-4-11 , 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B EN60601-1, 30% 500ms, 60% 100ms, 100% 10ms, 100% 5000ms (-M) Perf Criteria A, A (with 50% load), A, B 

- Safety Approvals • EN60601-1, ANSI/AAMI ES60601-1, CSA22.2 No.60601-1 per cUL, Including Risk Management, EN60950-1, UL60950-1 

**CLC175** 

## ~~**Models and Ratings**~~ 

**==> picture [495 x 61] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||
|---|---|---|---|---|---|---|---|
|Output Power|[(1)]|Output Voltage V1|Output Current V1|Fan OutputV2|Standby SupplyV3 (optional)|Model Number|[(2,3)]|
|175 W|12.0 VDC|13.90 A|12.0 V/0.5 A|5.0 V/0.5 A|CLC175US12|
|175 W|24.0 VDC|6.90 A|12.0 V/0.5 A|5.0 V/0.5 A|CLC175US24|
|175 W|28.0 VDC|6.25 A|12.0 V/0.5 A|5.0 V/0.5 A|CLC175US28(5)|
|175 W|48.0 VDC|3.50 A|12.0 V/0.5 A|5.0 V/0.5 A|CLC175US48|

**----- End of picture text -----**<br>


## ~~**Notes**~~ 

_1. 10 CFM airflow._ 

_2. For medical version add, suffix ‘-M’ to model number._ 

_3. For 5 V standby (V3), Power OK & Inhibit, add suffix ‘-A’ to model number._ 

_4. For cover with Top Fan assembly add ‘-TF’ to model number e.g. CLC175US12-TF, CLC175US12-ATF, CLC175US12-MTF or CLC175US12-MATF._ 

_5. Not available for -A or -M._ 

## ~~**Mechanical Details**~~ 

**==> picture [525 x 536] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|5.00 (127.0)|
|0.22 (5.7)|4.55 (115.6)|1.30|
|(33.0)|
|0.20 (5.1)|
|7|
|In put Connector J1|
|Pin 1|Line|
|Pin 2|Neutral|
|— a|||0.25”Faston|Earth|
|(76.2)3.00|2.50|09-50-1031 and Molex seriesJ1 mates with Molex housing|
|(48.3)1.90|(64.8)2.55|(63.6)|5194 crimp terminals.|
|1.11|
|0.61|(28.3)|
|(15.6)|Output Connector J2|
|Z|Pin 1|+V1|
|0.23 (5.7)|0.19 (4.8)|Pin 2|+V1|
|0.20 (5.1)|!|Hea|0.25 Faston|l|V Adj.|a|a|0.14|SMD component height|el|Pin 3|+V1|
|Ground Tab|(3.5)|Pin 4|+V1|
|ø0.312 (7.92) Clearance Top & Bottom4 x ø0.156 (3.96) Mounting Holes|I|0.18|Pin 5|RTN|
|(4.6)|Pin 6|RTN|
|Pin 7|RTN|
|Fan Cover|pT|5.50 (139.7)|J2 mates with Molex housing Pin 8|RTN|
|09-50-1081|and Molex series|
|5194 crimp terminals.|
|Input|
|Connector|
|(88.9)3.50|Signal Connector J3|
|Pin 1|+5V Standby|
|Pin 2|Logic GND|
|Pin 3|Logic GND|
|0.25 (0.6)|
|Faston Ground Terminal|Output Connector|Pin 4|Power OK|
|Pin 5|Inhibit HI|
|o|n|e|
|Pin 6|Inhibit LO|
|Pin 7|+Sense|
|Pin 8|-Sense|
|Pin 9|+Vout|
|2.00|
|(50.7)|Pin 10|-Vout|
|J3 mates with JST housing|
|;|001T-P0.5 crimp terminals. PHDR-10VS|and JST SPHD-|
|i|h|) ||
|4 x M3 x 0.5 THD|
|0.16 (4.0) Max Screw|as|aa]|
|Penetration|Fan Connector J4|
|1.97|Pin 1|Fan +(12V)|
|(50.0)|Pin 2|Fan -|
|J4 mates with Molex housing|
|°|@|0.77 (19.5)|crimp terminals.22-01-1024 and Molex series 5103|
|5|a|Ss|
|0.39 (9.9)|2|4.724 (120.0)|
|Notes|
|2 x M3 x 0.5 THD|1. All dimensions in inches (mm).|
|0.16 (4.0) Max ScrewPenetration|0.98 (25.0)|Tolerance .xx = ±0.02 (0.50);|
|.xxx = ±0.01 (0.25)|
|2. Weight: 0.7 lbs (317 g) approx.|
|3. For thermal derating, please|
|=~|refer to longform datasheet.|ee|
|0.39 (9.9)|4.72 (120.0)|

**----- End of picture text -----**<br>


24 April 17

Updated at June 8, 2026

XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →