CCH400PS24
AC/DC Enclosed Power Supply (PSU), ITE, 1 Outputs, 411 W, 24 VDC, 17 A
- Manufacturer: XP POWER
- Product type: AC / DC Enclosed Power Supplies
- No. of Outputs:1Outputs; Output Power Max:411W; Output Voltage - Output 1:24V; Output Current - Output 1:17A; Output Voltage - Output 2:-; Output Current - Output 2:-; Output Voltage - Outp
- SVHC: No SVHC (15-Jan-2018)
- Product Range: CCH400 Series
- No. of Outputs: 1Outputs
- Output Power Max: 411W
- Input Voltage VAC: 90V AC to 264V AC
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 90V
- Power Supply Output Type: Adjustable, Fixed
- Output Current - Output 1: 17A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Current - Output 4: -
- Output Voltage - Output 1: 24VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 401.66 € |
| Current stock | 10+ |
| Lead time | 30 days |
**400/600 Watts** xppower.com ## **CCH400-600 Series** - Baseplate Cooled - High Efficiency up to 90% - -40 °C to +85 °C Operation - Industrial & MIL-STD461E EMC Compliance - Power Fail, Inhibit, Overtemp & Current Share - 5V Standby Output - 3 Year Warranty ## ~~**Specification**~~ ## **Input** - Input Voltage • 90-264 VAC Input Frequency • 47-400 Hz[(1)] Input Current • CCH400: 4.3/2.1 A typ. at 115/230 VAC, CCH600: 6.3/3.1 A typ. at 115/230 VAC, full load - Inrush Current • 60 A max at 230 VAC, 25 °C cold start Power Factor • >0.9 Earth Leakage Current • 0.7/1.1 mA at 115/230 VAC at 60/50 Hz Input Protection • Internal F10 A/250 V fuse ## **Output** |**Outputputut**|| |---|---| |Output Voltage|• 12-48 VDC| |Output Voltage Trim<br>Initial Set Accuracy<br>Minimum Load<br>Start Up Delay<br>Start Up Rise Time<br>Hold Up Time<br>Drift|• ±10%<br>• ±1% V1, ±3% V2<br>• No minimum load required<br>• Typically 1 s<br>• 50 ms typical<br>• 20 ms min<br>• ±0.2% after 20 min warm up| |Line Regulation|• ±0.5% max| |Load Regulation<br>Over/Undershoot<br>Transient Response|• ±1% V1, ±5% V2 max<br>• 1% typical<br>• 4% max. deviation, recovery to within<br>1% in 500μs for a 50-75-50% load<br>change| |Ripple & Noise|• Typically 1% pk-pk V1, V2 2%,| ||20 MHz bandwidth| |Overvoltage Protection•|• 110-140% Vnom, recycle input to reset| |Overload Protection|• 105-140% V1 only| |Short Circuit Protection|• Continuous, approximately constant| ||current| |Temperature|• 0.05%/˚C| |Coefficient|| |Overtemp. Protection|• Fitted| |Remote Sense<br>Remote On/Off|• Compensates for 0.5 V total voltage drop<br>• Uncommitted isolated optocoupler diode,<br>powered diode inhibits V1| ## **General** - Efficiency • 89% typical Isolation • 3000 VAC Input to Output, 1500 VAC Input to Ground, 500 VDC Output to Ground - Switching Frequency • 30-333 kHz PFC, 51.1 kHz main and 138 kHz standby converter - Signals • Power Fail, Inhibit, Current Share, Overtemperature Warning and 5 V Standby - MTBF • 300 kHrs to MIL-HDBK-217F at 25 °C, GB ## **Environmental** |**Environmental**|| |---|---| |Operating Temperature|• -40˚C to +85˚C baseplate, see thermal| ||considerations| |Cooling|• Baseplate, conduction cooling| |Operating Humidity|• 95% RH, non-condensing| |Storage Temperature|• -40˚C to +85˚C| |Operating Altitude|• 3000 m| |Shock|• MIL-STD 810F Clause 516.5 proc 1| |Vibration|• MIL-STD 810F figure 514.5C-17| ## **EMC & Safety** |**EMC & Safetyy**|| |---|---| |Low Voltage PSU EMC|• EN61204-3, high severity level| |Emissions|• EN55032 level B conducted, level A| ||radiated, MIL-STD 461D-F, CE102| |Harmonic Currents|• EN61000-3-2, class A| |Voltage Flicker|• EN61000-3-3| |Radiated Immunity|• EN61000-4-3, level 3 Perf Criteria A| |EFT/Burst|• EN61000-4-4, level 3 Perf Criteria A| |Surge|• EN61000-4-5, installation class 3| ||Perf Criteria A| |Conducted Immunity|• EN61000-4-6, level 3 Perf Criteria A,| ||MIL-STD 461 CS114| |Dips & Interruptions|• EN61000-4-11 , 30% 10 ms, 60% 100 ms,| ||100% 5000 ms, Perf Criteria A, B, B| |Safety Approvals|• IEC60950-1 CB report, UL60950-1, TUV| ||EN60950-1, IEC62368-1| |Equipment Protection|• Class I| |Class|| ## ~~**Notes**~~ 1. Safety approvals cover frequency 47-63 Hz. **CCH400/600** ## ~~**Models and Ratings**~~ **==> picture [524 x 477] intentionally omitted <==** **----- Start of picture text -----**<br> ||||||| |---|---|---|---|---|---| |Output Power|Output Voltage V1|Output Current V1|Standby Supply V2|Model Number| |411 W|12.0 VDC|34.0 A|5.0 V/0.5 A|CCH400PS12| |411 W|24.0 VDC|17.0 A|5.0 V/0.5 A|CCH400PS24| |409 W|28.0 VDC|14.5 A|5.0 V/0.5 A|CCH400PS28| |411 W|48.0 VDC|8.5 A|5.0 V/0.5 A|CCH400PS48| |603 W|12.0 VDC|50.0 A|5.0 V/0.5 A|CCH600PS12| |603 W|24.0 VDC|25.0 A|5.0 V/0.5 A|CCH600PS24| |605 W|28.0 VDC|21.5 A|5.0 V/0.5 A|CCH600PS28| |603 W|48.0 VDC|12.5 A|5.0 V/0.5 A|CCH600PS48| |Mechanical Details| |8.43 (214.00)| |Voltage Adjust.|-|+|Output Terminals (M4)| |Torque 8 in-lb (0.9 Nm) max| |ee|ee| |Signals Connector| |Exploded View| |Signal Connector| |Pin|Function|Pin 10|Pin 9| |1|+Standby|(102.00)4.02| |2|+Standby| |3|-Standby|Pin 2|Pin 1| |4|-Standby| |5|+Sense|See note 5.| |6|-Sense| |7|Overtemp. Warning|0.30 (7.72)|Input Connector| |8|Power Fail|3 Way AMP/Tyco| |9|Current Share| |10|Inhibit|Input Connector| |Connector: 10 WAY 2mm pitch p/n| |MOLEX 87833-1031| |1.69| |Mating half: p/n MOLEX 51110-1056|(43.00)|Pin 3|Pin 2|Pin 1| |Contact: p/n MOLEX 50394-8100|yy| |ITE)| ||| |Input Connector| |Pin|Function| |1|Earth| |7.84 (199.00)| |2|Neutral| |M4 fixings in 6 positions| |3|Line|4.21 (107.00)|Max. screw penetration to be 0.16 (4.0)| |from bottom face of baseplate| |Connector: 3 way AMP/Tyco|0.59 (15.00)|Torque 13.2 in-lb (1.5 Nm) max| |type MATE-N-LOK 1-350943-0| |Mates with MATE-N-LOK 350766-1| |0.177 Ø (4.50)| |thru in 4 positions| |Notes| |3.48 (88.4)| |1. All dimensions in inches (mm).|2.83| |2. Tolerance .xx = ±0.02 (0.50);|(72.00)| |.xxx = ±0.01 (0.25)| |3. Weight 3.3 lbs (1.5 kg)|—|(30.00)1.18|Tire|e|]| |4. Connector kit available,|friéhoth||| |order part no. ‘CCH CONKIT’|0.20| |—|(5.00)||| |5. Inhibit, overtemperature and power fail are|8.23 (209.00)|0.27| |referenced to the OV power terminal.|(6.80)| **----- End of picture text -----**<br> 5. Inhibit, overtemperature and power fail are referenced to the OV power terminal. ## ~~**Thermal Considerations**~~ The baseplate must be maintainedat or below 85 °C and therefore a suitable heatsink must be selected to remove the heat from the power supply. Details of the heatsink calculations and other considerations can be found in the longform datasheet. **==> picture [205 x 123] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>50<br>0<br>-40 -20 0 +85<br>Baseplate Temperature (ºC)<br>Output Load (%) Some specification<br>parameters may not be met<br>**----- End of picture text -----**<br> 12 Oct 2022
Updated at June 10, 2026
XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →