CA30CAN25PAM1

**Proximity Sensors Capacitive Thermoplastic Polyester Housing Types CA30CAN/CAF.....** 

- **4TH Generation TRIPLESHIELD[TM ]** 

- **Adjustable sensing distance: 2 - 20 mm flush or 4-30 mm non-flush** 

- **Protection: short-circuit, transients and reverse polarity** 

**• Dust and humidity compensation • Dust or temperature alarm output • Rated operational voltage: 10-40 VDC • Output: DC 200 mA, NPN or PNP • Standard Output: NO and NC • LED indications for power-supply, output and stability • IP67, IP68, IP69K, Nema 1, 2, 4, 4X, 5, 6, 6P, 12 • Cable and M12 connector versions available Product Descri** ~~oF~~ **ption Orderin** ~~C€ @:~~ **g Ke** ~~EC~~ **y** OL **CA30CAN25NAM1** AB **Capacitive prox im ity switch** The CA30CA.. capacitive the green and yellow LEDs. **Housing diameter (mm)** proximity switches feature an The sensing distance is **Housing material** improved 4[TH] generation _TRI-_ increased by 20 – 25 % **Housing length** _PLESHIELD_[TM] technology. allowing room for additional **Detection principle** Furthermore, these sensors stable detection. **Rated operating dist. (mm)** feature increased immunity The dust alarm function **Output type** to electromagnetic interfergives an early warning that **Output configuration** ence (EMI), especially to frethe sensing surroundings ~~il~~ **Connection type** quency drives. Not only does have to be cleaned. 4[TH] generation _TRIPLESH-_ The temperature alarm func- _IELD_[TM] feature an increased tion raises an alarm if the EMI, but  it also increases sensing surface goes beyond the immunity to humidity and 60 degree Celsius. dust. The implementation of The sensor housing is featurstability indication eases the ing IP69K as well as approval setup procedure, as both by ECOLAB for cleaning and Stable ON and Stable OFF disinfection agents. positions are indicated by 

## **T e Selection yp** 

|**Housing**|**Sensor**|**Output Output**|**Output Output**|**Connection Rated operating**|**Connection Rated operating**|**Ordering no.**|**Ordering no.**|**Ordering no.**|
|---|---|---|---|---|---|---|---|---|
|**diameter  type**|**diameter  type**|**type**|**function**|**function**|**distance (Sn) **|**Standard**|**Dust alarm**|**Temperature alarm**|
|M 30|Flush|NPN|NO+NC|Cable|0 - 16 mm|**CA30CAF16NA**|||
|M 30|Flush|NPN|NO+NC|M12 Plug|0 - 16 mm|**CA30CAF16NAM1**|||
|M 30|Flush|PNP|NO+NC|Cable|0 - 16 mm|**CA30CAF16PA**|||
|M 30|Flush|PNP|NO+NC|M12 Plug|0 - 16 mm|**CA30CAF16PAM1**|||
|M 30|Flush|PNP|NO|Cable|0 - 16 mm||**CA30CAF16PODU**1)|**CA30CAF16POTA**1)|
|M 30|Flush|PNP|NC|Cable|0 - 16 mm||**CA30CAF16PCDU**1)|**CA30CAF16PCTA**1)|
|M 30|Flush|PNP|NC|M12 Plug|0 - 16 mm||**CA30CAF16PCM1DU**2)||
|M 30|Non-Flush NPN|Non-Flush NPN|NO+NC|Cable|0 - 25 mm|**CA30CAN25NA**|||
|M 30|Non-Flush NPN|Non-Flush NPN|NO+NC|M12 Plug|0 - 25 mm|**CA30CAN25NAM1**|||
|M 30|Non-Flush PNP|Non-Flush PNP|NO+NC|Cable|0 - 25 mm|**CA30CAN25PA**|||
|M 30|Non-Flush PNP|Non-Flush PNP|NO+NC|M12 Plug|0 - 25 mm|**CA30CAN25PAM1**|||
|M 30|Non-Flush PNP|Non-Flush PNP|NO|Cable|0 - 25 mm||**CA30CAN25PODU**3)|**CA30CAN25POTA**3)|
|M 30|Non-Flush PNP|Non-Flush PNP|NC|Cable|0 - 25 mm||**CA30CAN25PCDU**3)|**CA30CAN25PCTA**3)|
||||||||1)Replaced by CA30CAF16BPA2IO||
||||||||2)Replaced by CA30CAF16BPM1IO||



- 3) Replaced by CA30CAN25BPA2IO 

## **S ecifications** EN 60947-5-2 **p** 

**Rated operating distance** (Sn) Non-flush mounted sensor 0 - 25 mm (factory setting 25 mm), (ref. target 75x75 mm ST37, 1 mm thick, grounded) 

Flush mounted sensor 

0 - 16 mm (factory setting 16 mm - non-flush mounted) (ref. target 48x48 mm ST37, 1 mm thick, grounded) 

**1** 

Specifications are subject to change without notice (05.07.2022) 

**CA30CAN/CAF.....** 

## **Specifications (cont.)** EN 60947-5-2 

|**Sensitivity control**|Adjustable by potentiometer|Adjustable by potentiometer|Adjustable by potentiometer|Adjustable by potentiometer<br>**Connection**||
|---|---|---|---|---|---|
|Electrical adjustment|11 turns|||Cable|PVC,|
|Mechanical adjustment|16 turns||||Ø5.2 x 2 m, 4 x 0.34 mm2|
|Adjustable distance|||||Oil proof, grey|
|Flush types|2 to 20 mm|||Plug (M1)|M12 x 1 - 4pin|
|Non-flush types|4 to 30 mm|||**Temperature alarm output**|60ºC ± 5ºC|
|**Effective operating dist.** (Sr)|0.9 x Sn≤ Sr≤ 1.1 x Sn|||Response time examples||
|**Usable operating dist.**(Su)<br>**Repeat accuracy **(R)|0.85 x Sr≤ Su≤ 1.15 x Sr<br>≤ 5%|||TA= 25°C|16 sec @ TEXC= 800°C<br>390 sec @ TEXC= 80°C|
|**Hysteresis**(H)<br>**Rated operational volt.**(UB)|3 - 20%<br>10 to 40 VDC(ripple incl.)|||**_TRIPLESHIELD_**TM<br>**Exceeding the norms for**<br>**capacitive sensors**||
|**Ripple**|≤ 10%|||Electrostatic discharge||
|**Output function**|NPN or PNP|||(EN61000-4-2)||
|**Output switching function**<br>**Rated operational current**(Ie)≤ 200 mA|N.O. and N.C.<br>≤ 200 mA(continuous)|||Contact discharge<br>Air discharge<br>Electrical fast transients/burst|> 40 kV<br>> 40 kV<br>Electrical fast transients/burst|
|**Capacitive load**|100 nF|||(EN 61000-4-4)|±4kV|
|**No-load supply current**(Io)|≤ 12 mA|||Surge||
|**Voltage drop **(Ud)|≤ 2.0 VDC @ 200 mA DC|||(EN 61000-4-5)||
|**Minimum operational**<br>**current** (Im)|≥ 0.5 mA|||Power-supply<br>Sensor output|> 2kV (with 500 Ω)<br>> 2kV(with 500 Ω)|
|**OFF state current** (Ir)<br>**Protection**<br>**Frequency of operating**<br>**cycles**(f)<br>**Response time OFF-ON** (ton)<br>**Response time ON-OFF** (toff)|≤ 100μA<br>Short-circuit, reverse<br>polarity,transients<br>50 Hz<br>≤ 10 ms<br>≤ 10 ms|||Wire conducted disturbances<br> (EN 61000-4-6)<br>Power-frequency magnetic<br>fields (EN 61000-4-8)<br>Continuous<br>Short-time<br>Radiated RF electromagnetic<br>fields(EN 61000-4-3)|Wire conducted disturbances<br>> 20 Vrms<br>> 60 A/m, 75.9 µ tesla<br>> 600 A/m,759µtesla<br>Radiated RF electromagnetic<br>> 20 V/m|
|**Power ON delay **(tv)|≤ 200 ms|||Shock (IEC 60068-2-32)|30 G / 11ms, 3 pos, 3 neg|
|**Indication**|||||per axis|
|Target detected|LED, yellow|||Rough handling shocks||
|Power and detection stabilityLED|LED, green|||(IEC 60068-2-31)|twice from 1 m|
|**Environment**|||||100 times from 0.5 m|
|Installation category<br>Degree of pollution<br>Degree of protection<br>NEMA type<br>Operating temperature<br>Max. temperature on sensing face 120°C (248°F)<br>Storage temperature<br>**Rated insulation voltage**|III (IEC 60664, 60664A;<br>60947-1)<br>3 (IEC 60664, 60664A;<br>60947-1)<br>IP 67, IP 68/60 min., IP69K*<br>(IEC 60529; 60943-1)<br>1, 2, 4, 4X, 5, 6, 6P, 12<br>-30 to +85°C ( -22 to +185°F)<br>Max. temperature on sensing face 120°C (248°F)<br>-40 to +85°C(-40 to +185°F)<br>1 kVAC (rms)<br>IECprotection class III|||IP 67, IP 68/60 min., IP69K*<br>Vibration(IEC 60068-2-6)<br>**Housing material**<br>Body<br>Cable gland<br>Fingernuts<br>Trimmershaft<br>**Weight**<br>Cable version<br>Plugversion<br>**Approvals**|10 to 150 Hz,1 mm / 15 G<br>PBT, grey,<br>30% glass reinforced<br>PA12, black<br>PA12, black<br>Nylon<br>190 g<br>106g<br>cULus(UL508),ECOLAB|
|**Tightening torque**|≤ 7.5 Nm|||**CE-marking**|Yes|
|||||**MTTFd**|829 years @ 40°C (+104°F)|



* The IP69K test according to DIN 40050-9 for high-pressure, high-temperature wash-down applications. The sensor must not only be dust tight (IP6X), but also able to withstand high-pressure and steam cleaning. The sensor is exposed to high-pressure water from a spray nozzle that is fed with 80°C water at 8’000– 10’000 KPa (80–100bar) and a flow rate of 14–6L/min. The nozzle is held 100 –150 mm from the sensor at angles of 0°, 30°, 60° and 90° for 30s each. The test device sits on a turntable that rotates with a speed of 5 times per minute. The sensor must not suffer any damaging effects from the high pressure water in appearance and function. 

90° 60° 30° 0° 

**2** 

Specifications are subject to change without notice (05.07.2022) 

**CA30CAN/CAF.....** 

## **Adjustment Guide** 

The environments in which capacitive sensors are installed can often be unstable as regards temperature, humidity, object distance and industrial (noise) interference. This is why Carlo Gavazzi offers, as a stand- 

ard feature in all TRIPLESHIELD™ capacitive sensors, a user-friendly sensitivity adjustment instead of a fixed sensing range. Likewise, these sensors provide an extended sensing range to accommodate mechanically 

demanding areas and temperature stability to ensure high immunity to electromagnetic interference (EMI) and a minimum need for adjusting sensitivity if the temperature varies. 

**==> picture [72 x 72] intentionally omitted <==**

## **Note:** 

The sensors are factory set (default) to nominal sensing range Sn. 

## **Wiring Diagram** 

**==> picture [234 x 217] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN<br>BN<br>WH<br>10 - 40 VDC<br>BK 200 mA<br>BU<br>PNP<br>BN<br>BK<br>10 - 40 VDC<br>WH 200 mA<br>BU<br>**----- End of picture text -----**<br>


**==> picture [232 x 101] intentionally omitted <==**

**----- Start of picture text -----**<br>
PNP Dust- or Temperature alarm on NC<br>BN<br>BK<br>10 - 40 VDC<br>WH (DU/TA) 200 mA<br>BU<br>**----- End of picture text -----**<br>


**==> picture [232 x 101] intentionally omitted <==**

**----- Start of picture text -----**<br>
PNP Dust- or Temperature alarm on NO<br>BN<br>BK<br>10 - 40 VDC<br>WH (DU/TA) 200 mA<br>BU<br>**----- End of picture text -----**<br>


## **Detection Diagram** 

**==> picture [500 x 160] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor<br>Y Flush Non-flush<br>X<br>Target<br>Distance (inch) Distance (inch)<br>-0,59 -0,39 -0,20 0 0,20 0,39 0,59 0,79 0,98 1,18 -0,59 -0,39 -0,20 0 0,20 0,39 0,59 0,79 0,98 1,18<br>25 0,98 25 0,98<br>20 0,79 20 0,79<br>15 0,59 15 0,59<br>10 0,39 10 0,39<br>5 0,20 5 0,20<br>0 0,00 0 0,00<br>-5 -0,20 -5 -0,20<br>-10 -0,39 -10 -0,39<br>-15 -0,59 -15 -0,59<br>-20 -0,79 -20 -0,79<br>-25 -0,98 -25 -0,98<br>-15 -10 -5 0 5 10 15 20 25 30 -15 -10 -5 0 5 10 15 20 25 30<br>Distance (mm) Distance (mm)<br>front front<br>(mm) (inch) (mm) (inch)<br>Sensor Sensor<br>**----- End of picture text -----**<br>


**3** 

Specifications are subject to change without notice (05.07.2022) 

**CA30CAN/CAF.....** 

## **Detection Stabilit Indication y** 

**==> picture [72 x 72] intentionally omitted <==**

**==> picture [500 x 215] intentionally omitted <==**

**----- Start of picture text -----**<br>
Target influence<br>Stable ON<br>Output ON<br>Output OFF<br>Stable OFF<br>Time<br>Green LED ON<br>Yellow LED ON<br>Output NO<br>Output NC<br>Dust alarm NO >1 sec. >1 sec. >1 sec. >2 sec.<br>Dust alarm NC >1 sec. >1 sec. >1 sec. >2 sec.<br>**----- End of picture text -----**<br>


## **Dimensions** 

**==> picture [159 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
CA30CAF....<br>81<br>61<br>LED<br>M30 x 1.5 x 59.5<br>CA30CAN....<br>**----- End of picture text -----**<br>


**==> picture [65 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
CA30CAF....M1<br>**----- End of picture text -----**<br>


**==> picture [141 x 95] intentionally omitted <==**

**----- Start of picture text -----**<br>
74<br>61<br>LED<br>M12 x 1.0<br>M30 x 1.5 x 59.5<br>**----- End of picture text -----**<br>


## **CA30CAN....M1** 

**==> picture [407 x 233] intentionally omitted <==**

**----- Start of picture text -----**<br>
81 74<br>61 61<br>LED<br>LED<br>14,5 M12 x 1.0<br>14,5<br>M30 x 1.5 x 45.5<br>M30 x 1.5 x 45.5<br>Cable Plug<br>Back of sensor<br>2 Colour code<br>Sensitivity<br>adjustment<br>Green LED 1 Brown<br>Yellow LED DIST. 3 1 2 White<br>3 Blue<br>OUTPUT STABLE<br>4 Black<br>4<br>**----- End of picture text -----**<br>


**4** 

Specifications are subject to change without notice (05.07.2022) 

**CA30CAN/CAF.....** 

## **Installation Hints** 

Capacitive sensors have a • **Chemical Industry** unique ability to detect alCleansers, fertilizers, liqmost any material in li quid or uid soaps, corrosives and solid form. Capa ci tive senpe t ro chemicals. sors are able to detect metallic as well as non-metallic • **Wood Industry** ob jects. How ever, their tradiSaw dust, paper products, tional use is for non-metallic door and window frames. materials such as: 

Cleansers, fertilizers, liquid soaps, corrosives and pe t ro chemicals. 

- **Ceramics & Glass** 

- • **Plastics Industry Industry** Resins, regrinds or moulded products. 

   - Raw materials, clay or finish ed products, bottles. 

- **Packaging Industry** 

- Package inspection for level or contents, dry goods, fruits and vegetables, dairy products. 

Materials are detected due to their dielectric constant. The bigger the size of an object, the higher the density of material, the better or easier it is to detect the object. 

The nominal sensing di stance for a capacitive sensor is refe r red to a grounded me tal plate (ST37). For additional information regarding di elec tric ratings of materials please re fer to Technical Information. 

**==> picture [490 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage/  Relief of cable strain Protection of the sensing face  Switch mounted on mobile carrier<br>current peaks, separate the prox. switch pow-<br>er cables from any other power cables, e.g.<br>motor, contactor or solenoid cables Not correct<br>Correct<br>The cable should not be pulled A proximity switch should not serve as  Any repetitive flexing of the<br>mechanical stop cable should be avoided<br>== 2<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

- Capacitive switch: CA30CAN/CAF....... 

- User manual 

- 2 x M30 fingernuts 

## **Accessories** 

   - Connector type CON.14NF..W -series. 

   - Mounting Brackets AMB30-S.. (straight), 

   - AMB30-A.. (angled) 

- Screwdriver 

- **Packaging:** Cardboard box 

**5** 

Specifications are subject to change without notice (05.07.2022)