BI2-Q5.5-AP6X

## BI2-Q5.5-AP6X Inductive Sensor 

## Features 

■[Rectangular, height 5.5 mm] ■[Active face on top] 

■[Plastic, PP] 

■[DC 3-wire, 10…30 VDC] 

- [NO contact, PNP output] 

■[Cable connection] 

## Wiring diagram 

## Technical data 

||Type|BI2-Q5.5-AP6X|
|---|---|---|
||ID|1613000|
||General data||
||Rated switching distance<br>Mounting conditions|2 mm<br>Flush|
||Secured operating distance|≤ (0.81 × Sn) mm|
||Correction factors|St37 = 1; Al = 0.3; stainless steel = 0.7;|
|Ms = 0.4<br>Repeat accuracy<br>≤ 2 % of full scale<br>~~sss~~|||
||Temperature drift|≤ ±10 %|
||Hysteresis|3…15  %|
||Electrical data||
||Operating voltage|10…30  VDC|
||Residual ripple|≤ 10 % Uss|
||DC rated operational current|≤ 150 mA|
||No-load current|15  mA|
||Residual current|≤ 0.1 mA|
||Isolation test voltage|≤ 0.5 kV|
||Short-circuit protection|yes / Cyclic|
||Voltage drop at Ie|≤ 1.8 V|
||Wire breakage/Reverse polarity protec-|yes / Complete|
||tion||
||Output function|3-wire, NO contact, PNP|
||Switching frequency|2 kHz|
||Mechanical data||
||Design|Rectangular, Q5,5|
||Dimensions|28 x 8 x 5.5  mm|
||Housing material|Plastic, PP-GF20|



## Functional principle 

Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field that interacts with the target. Inductive sensors generate this field via an RLC circuit with a ferrite coil. 

Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 1|2 

## Technical data 

|Technical data||
|---|---|
|Active area material|PP-GF20|
|Tightening torque fixing screw|0.5 Nm|
|Electrical connection|Cable|
|Cable quality|Ø 3  mm, Gray, Lif9Y-11Y, PUR, 2  m|
||Suited for E-ChainSystems® acc. to man-|
||ufacturers declaration H1063M|
|Core cross-section|3 x 0.14  mm<br>2|
|Environmental conditions||
|Ambient temperature|-25…+70  °C|
|Vibration resistance|55 Hz (1 mm)|
|Shock resistance|30  g (11 ms)|
|Protection class|IP67|
|MTTF|2283  years acc. to SN 29500 (Ed. 99) 40|
||°C|
|Switching state|LED, Yellow|



## Mounting instructions 

Mounting instructions/Description 

|Distance D<br>2 x B<br>Distance W<br>3 x Sn<br>Distance S<br>1 x B<br>Distance G<br>6 x Sn<br>Width active area<br>8 mm<br>~~—~~<br>~~i~~|
|---|
|B|



## Accessories 

MW-Q4.7/Q5.5 6945013 Mounting bracket for rectangular Q4.7 or Q5.5; material VA 1.4401 

Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 2|2