BE05-2A85-P

**A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components** 

## **BE Series Reed Relays** 

- Features: Latching or High IR, Plastic or Metal Housing, High Life Expectancy, Variety of Pin Out Schemes 

- Applications: General purpose, Test Equipment, Medical equipment & Others 

- Markets: Telecommunications, Medical, Test & Measurement & Others 

## **Part Description: B E  0 0 - 0 X  0 0 - X** 

|**Customer Options**<br>~~PR~~|**Customer Options**<br>~~PR~~|**Customer Options**<br>~~PR~~|**Customer Options**<br>~~PR~~|**Customer Options**<br>~~PR~~|
|---|---|---|---|---|
|**Switch Model**|**66**|**85**|**90**|**Unit**|
|**Rated Power (max.)**<br>AnyDC combination of V&A not to exceed their individual  max.’s<br>~~ee~~|10<br>~~ee~~|100<br>~~ee~~|10<br>~~ee~~|W<br>~~ee~~|
|**Switching Voltage (max.)**<br>DC orpeak AC<br>~~ee~~|200<br>~~ee~~|1,000<br>~~ee~~|175<br>~~ee~~|V<br>~~ee~~|
|**Switching Current (max.)**<br>DC orpeak AC|0.5|1.0|0.5|A|
|**Carry Current (max.)**<br>DC orpeak AC|1.25|2.5|1.2|A|
|**Contact Resistance (max.)**<br>@0.5V & 50mA|150|150|150|mOhm|
|**Breakdown Voltage (min.)**<br>Accordingto EN60255-5|0.225|2.5|0.2|kVDC|
|**Operating Time (max.)**<br>Incl. Bounce;Measured with w/Nominal Voltage|0.5|1.1|0.7|ms|
|**Release Time (max.)**<br>Measured with no Coil Excitation|0.1|0.1|1.5|ms|
|**Insulation Resistance (typ.)**<br>Rh<45%,100V Test Voltage|1010|1012|109|Ohm|
|**Capacitance (typ.)**<br>@10kHz across open Switch|0.2|0.5|1.0|pF|



USA: +1.866.782.6339 │ salesusa@standexmeder.com Europe: +49.7731.8399.0 │ info@standexmeder.com Asia: +86.21.37820625 │ salesasia@standexmeder.com 

Version 01 

27.01.2015 

Modifications in the sense of technical progress are reserved. 

**A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components** 

**==> picture [538 x 284] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||
|---|---|---|---|---|---|---|
|Coil Data|
|Coil Voltage|Coil Resistance|Pull-In Voltage|Drop-Out Voltage|Nominal Coil Power|
|Contact|Switch|
|(nom.)|(typ.)|(max.)|(min.)|(typ.)|
|Form|Model|
|Unit|VDC|Ohm|VDC|VDC|mW|
|05|140 (345)|3.5|0.75|179 (72)|
|66|12|855 (2,145)|8.4|1.8|168 (67)|
|24|3,285 (7,845)|16.8|3.6|175 (73)|
|1A|
|05|105 (140)|3.5|0.75|238 (179)|
|85|12|620 (1,000)|8.4|1.8|232 (144)|
|24|1,400 (2,300)|16.8|3.6|411 (250)|
|12|(1,100)|8.4|1.8|131|
|1B|66|
|24|(4,240)|16.8|3.6|136|
|1C|90|12|2,145|8.4|1.8|67|
|24|7,845|16,8|3.6|73|
|12|445 (1,100)|8.4|1.8|324 (131)|
|66|
|24|1,700 (4,240)|16.8|3.6|339 (136)|
|2A|05|70 (110)|3.5|0.75|357 (227)|
|85|12|420 (600)|8.4|1.8|343 (240)|
|24|1,080 (1,600)|16.8|3.6|533 (360)|
|05|49|3.5|0.25|510|
|2A + 2B|85|12|303|8.4|0.7|475|
|24|1,140|16.8|1.4|505|

**----- End of picture text -----**<br>


The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C. The figures in brackets are for realys in metal casing. 

**Environmental Data** 

**==> picture [260 x 102] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|Environmental Data|Unit|
|Shock Resistance (max.)|
|50|g|
|1/2 sine wave duration 11ms|
|Vibration Resistance (max.)|20|g|
|Operating Temperature|-20 to 70|°|C|
|Storage Temperature|-35 to 95|°C|
|Soldering Temperature (max.)|
|260|°C|
|5 sec. max.|

**----- End of picture text -----**<br>


## **BE Reed Relay** 

## **Handling & Assembly Instructions** 

- Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. 

- External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays’ electrical characteristics. 

## **Life Test Data** 

*Load increase reduces life expectancy of Reed Switches 

- Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. 

- Wave soldering: maximum 260 ° /5 seconds. 

- Reflow soldering:  Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. 

USA: +1.866.782.6339 Europe: +49.7731.8399.0 Asia: +86.21.37820625 

│ salesusa@standexmeder.com 

│ info@standexmeder.com 

│ salesasia@standexmeder.com 

Version 01 

27.01.2015 

Modifications in the sense of technical progress are reserved. 

**A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components** 

## **Glossary Contact Form** 

NO = Normally Open Contacts **Form A** SPST = Single Pole Single Throw NC = Normally Closed Contacts **Form B** SPST = Single Pole Single Throw Changeover **Form C** SPDT = Single Pole Double Throw 

## **Pin Out** 

USA: +1.866.782.6339 │ salesusa@standexmeder.com Europe: +49.7731.8399.0 │ info@standexmeder.com Asia: +86.21.37820625 │ salesasia@standexmeder.com 

Modifications in the sense of technical progress are reserved. 

Version 01 

27.01.2015