B32671L1222J

## **Film Capacitors** 

Metallized Polypropylene Film Capacitors (MKP) 

**Series/Type: B32671L ... B32672L** Date: December 2012 

© EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. 

~~bs~~ **Metallized polypropylene film capacitors (MKP) B32671L ... B32672L High V AC, high temperature (wound)** 

## **Typical applications** 

**==> picture [81 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensional drawing<br>**----- End of picture text -----**<br>


~~.:~~ Electronic ballasts (resonant circuits)SMPSHigh-frequency AC loads ~~ee~~ ee Pulse circuits 

## **Climatic** 

> a Max. operating temperature: 125 ° C Climatic category (IEC 60068-1): 55/110/56 : **Construction** fs Dielectric: metallized polypropylene (PP) 

- Wound capacitor technology 

- rT Plastic case (UL 94 V-0) | Epoxy resin sealing **Features** Very high AC voltages for all frequency 

- rT ranges 

Dimensions in mm 

Lead spacing Lead diameter Type [é] ± 0.4 d1 10 0.6 B32671L 15 0.8 B32672L ~~——~~ 

- Very small dimensions 

- High peak voltage for short time periods 

- High peak current 

- High pulse withstand capability 

- RoHS-compatible 

- Halogen-free capacitors available on request 

## **Terminals** 

Parallel wire leads, lead-free tinned 

Special lead lengths available on request 

## **Marking** 

- Manufacturer's logo 

- lot number, series number 

- Rated capacitance (coded) 

- Capacitance tolerance (code letter) 

- Rated AC voltage 

- Date of manufacture (coded) 

## **Delivery mode** 

Bulk (untaped) 

Taped (Ammo pack or reel) 

For notes on taping, refer to chapter "Taping and packing“. 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 2 of 30 

## ~~_L~~ **B32671L ... B32672L** 

## **High V AC, high temperature (wound)** 

## **Overview of available types** 

|Lead spacing<br>~~——~~|10 mm<br>~~——~~|10 mm<br>~~——~~|10 mm<br>~~——~~|10 mm<br>~~——~~|10 mm<br>~~——~~|10 mm<br>~~——~~|15 mm<br>|15 mm<br>|15 mm<br>|15 mm<br>|15 mm<br>|15 mm<br>|15 mm<br>|15 mm<br>|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Type<br>~~———~~|B32671L<br>~~———~~||||||B32672L<br>||||||||
|Page<br>~~——~~|4<br>~~——~~||||||6<br>||||||||
|VRMS (V AC)<br>~~—~~|200<br>~~—FS~~|250<br>~~—FS~~|250<br>~~FS~~|500<br>~~FS~~|600<br>~~FS~~|700<br>~~FS~~|160<br>~~FS~~|200<br>~~FS~~|250<br>~~FS~~|250<br>~~FS~~|500<br>~~FS~~|600<br>~~FS~~|700<br>~~FS~~|900|
|VR (V DC)|400<br>~~FSS~~|630<br>~~FSS~~|1000<br>~~FSS~~|1000<br>~~FSS~~|1600<br>~~FSS~~|2000<br>~~FSS~~|250<br>~~FSS~~|420<br>~~FSS~~|630<br>~~FSS~~|1000<br>~~FSS~~|1300<br>~~FSS~~|1600<br>~~FSS~~|2000<br>~~FSS~~|2000|
|CR (nF)|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~||
|0.68<br>~~Se~~|~~FSS~~<br>~~Se~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~|~~FSS~~||
|1.0<br>~~Se~~<br>~~Se~~|~~Se~~<br>~~Se~~||||||||||||||
|1.2<br>~~Se~~<br>~~Se~~<br>~~Se~~|~~Se~~<br>~~Se~~<br>~~Se~~||~~a~~|~~a~~|||||||||||
|1.5<br>~~Se~~<br>~~Se~~<br>~~Se~~|~~Se~~<br>~~Se~~<br>~~Se~~||~~a~~|~~a~~|||||||||||
|2.2<br>~~Se~~<br>~~Se~~<br>~~Se~~|~~Se ~~<br>~~Se~~<br>~~Se~~|<br>|~~a~~<br>|~~a~~|||||||||||
|2.7<br>~~Se~~<br>~~Se~~|~~Se~~<br>~~Se~~||||||||||||||
|3.3<br>~~Se~~|~~Sea~~|~~a~~|~~a~~||||||||||||
|3.9|~~a~~|~~a~~|~~a~~||||||||||||
|4.7<br>~~Se~~|~~Se~~<br>~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~|~~Se~~||
|5.6<br>~~Se~~<br>~~Fe~~|~~Se~~<br>~~Fe~~||||||||||||||
|6.2<br>~~Se~~<br>~~Fe~~|~~Se~~<br>~~Fe~~||||||||||||||
|6.8<br>~~Fe~~|~~FeSe~~|~~Se~~|~~Se~~||||||||||||
|8.2|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~|~~SO~~||
|10|~~a~~|~~a~~|~~a~~||||||||||||
|12|~~a~~|~~a~~|~~a~~||||||||||||
|15|~~Se~~|~~Se~~|~~Se~~|~~et~~|~~et~~|~~et~~|~~et~~|~~et~~|~~et~~|~~et~~|~~et~~|~~et~~|~~et~~||
|22|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~|~~A~~||
|33|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|47|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|56|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|68|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|100|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|150|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|220|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|330|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|390<br>~~Se~~|~~a~~<br>~~Se~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~|~~a~~||
|470<br>~~Se~~<br>~~Se~~|~~Se~~<br>~~Se~~||||||||||||||
|680<br>~~Se~~<br>~~Se~~|~~Se~~<br>~~Se~~||||||||||||||
|1000<br>~~Se~~|~~Sea~~|~~a~~|||||||||||||



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 3 of 30 

~~SS~~ **B32671L** 

## **High V AC, high temperature (wound)** 

## **Ordering codes and packing units (lead spacing 10 mm)** 

|VRMS<br>f≤1 kHz<br>V AC|VR<br>V DC|CR<br>nF|Max. dimensions<br>w×h×l<br>mm|Ordering code<br>(composition see<br>below)|Ammo<br>pack<br>pcs./MOQ|Reel<br>pcs./<br>MOQ|Untaped<br>pcs./<br>MOQ|
|---|---|---|---|---|---|---|---|
|200|400|22<br>33<br>47<br>68<br>100|4.0×<br>9.0×13.0<br>4.0×<br>9.0×13.0<br>5.0×11.0×13.0<br>5.0×11.0×13.0<br>6.0×12.0×13.0|B32671L4223+***<br>B32671L4333+***<br>B32671L4473+***<br>B32671L4683+***<br>B32671L4104+***|4000<br>4000<br>3320<br>3320<br>2720|6800<br>6800<br>5200<br>5200<br>4400|4000<br>4000<br>4000<br>4000<br>4000|
|250|630|15<br>22<br>33<br>47<br>56|4.0×<br>9.0×13.0<br>5.0×11.0×13.0<br>5.0×11.0×13.0<br>6.0×12.0×13.0<br>6.0×12.0×13.0|B32671L6153+***<br>B32671L6223+***<br>B32671L6333+***<br>B32671L6473+***<br>B32671L6563+***|4000<br>3320<br>3320<br>2720<br>2720|6800<br>5200<br>5200<br>4400<br>4400|4000<br>4000<br>4000<br>4000<br>4000|
|250|1000|4.7<br>6.8<br>10<br>15<br>22|4.0×<br>9.0×13.0<br>4.0×<br>9.0×13.0<br>5.0×11.0×13.0<br>5.0×11.0×13.0<br>6.0×12.0×13.0|B32671L9472+***<br>B32671L9682+***<br>B32671L9103+***<br>B32671L9153+***<br>B32671L9223+***|4000<br>4000<br>3320<br>3320<br>2720|6800<br>6800<br>5200<br>5200<br>4400|4000<br>4000<br>4000<br>4000<br>4000|
|500|1000|3.3<br>3.9<br>4.7<br>5.6<br>6.2<br>6.8<br>8.2<br>10<br>12|4.0×<br>9.0×13.0<br>4.0×<br>9.0×13.0<br>4.0×<br>9.0×13.0<br>5.0×11.0×13.0<br>5.0×11.0×13.0<br>5.0×11.0×13.0<br>6.0×12.0×13.0<br>6.0×12.0×13.0<br>6.0×12.0×13.0|B32671L0332+***<br>B32671L0392+***<br>B32671L0472+***<br>B32671L0562+***<br>B32671L0622+***<br>B32671L0682+***<br>B32671L0822+***<br>B32671L0103+***<br>B32671L0123+***|4000<br>4000<br>4000<br>3320<br>3320<br>3320<br>3320<br>2720<br>2720|6800<br>6800<br>6800<br>5200<br>5200<br>5200<br>5200<br>4400<br>4400|4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000|



MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerances on request. 

## **Composition of ordering code** 

- + = Capacitance tolerance code: K = ± 10% J = ± 5% 

- *** = Packaging code: 

   - 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 4 of 30 

**B32671L High V AC, high temperature (wound)** 

**Ordering codes and packing units (lead spacing 10 mm)** 

|VRMS<br>f≤1 kHz<br>V AC|VR<br>V DC|CR<br>nF|Max. dimensions<br>w×h×l<br>mm|Ordering code<br>(composition see<br>below)|Ammo<br>pack<br>pcs./MOQ|Reel<br>pcs./<br>MOQ|Untaped<br>pcs./<br>MOQ|
|---|---|---|---|---|---|---|---|
|600|1600|1.2<br>1.5<br>2.2<br>2.7<br>3.3<br>3.9<br>4.7|4.0×<br>9.0×13.0<br>4.0×<br>9.0×13.0<br>5.0×11.0×13.0<br>5.0×11.0×13.0<br>6.0×12.0×13.0<br>6.0×12.0×13.0<br>6.0×12.0×13.0|B32671L1122+***<br>B32671L1152+***<br>B32671L1222+***<br>B32671L1272+***<br>B32671L1332+***<br>B32671L1392+***<br>B32671L1472+***|4000<br>4000<br>3320<br>3320<br>2720<br>2720<br>2720|6800<br>6800<br>5200<br>5200<br>4400<br>4400<br>4400|4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000|
|700|2000|1.0<br>1.2<br>1.5<br>2.2<br>2.7<br>3.3<br>3.9<br>4.7|4.0×<br>9.0×13.0<br>4.0×<br>9.0×13.0<br>4.0×<br>9.0×13.0<br>5.0×11.0×13.0<br>5.0×11.0×13.0<br>5.0×11.0×13.0<br>6.0×12.0×13.0<br>6.0×12.0×13.0|B32671L8102+***<br>B32671L8122+***<br>B32671L8152+***<br>B32671L8222+***<br>B32671L8272+***<br>B32671L8332+***<br>B32671L8392+***<br>B32671L8472+***|4000<br>4000<br>4000<br>3320<br>3320<br>3320<br>2720<br>2720|6800<br>6800<br>6800<br>5200<br>5200<br>5200<br>4400<br>4400|4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000|



MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerances on request. 

## **Composition of ordering code** 

+ = Capacitance tolerance code: K = ± 10% J = ± 5% 

- *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 5 of 30 

## **B32672L** __ **High V AC, high temperature (wound)** 

**Ordering codes and packing units (lead spacing 15 mm)** 

|VRMS<br>f≤1 kHz<br>V AC|VR<br>V DC|CR<br>nF|Max. dimensions<br>w×h×l<br>mm|Ordering code<br>(composition see<br>below)|Ammo<br>pack<br>pcs./MOQ|Reel<br>pcs./<br>MOQ|Untaped<br>pcs./<br>MOQ|
|---|---|---|---|---|---|---|---|
|160|250|150<br>220<br>330<br>470<br>680<br>1000|5.0×10.5×18.0<br>6.0×11.0×18.0<br>7.0×12.5×18.0<br>8.5×14.5×18.0<br>9.0×17.5×18.0<br>11.0×18.5×18.0|B32672L2154+***<br>B32672L2224+***<br>B32672L2334+***<br>B32672L2474+***<br>B32672L2684+***<br>B32672L2105+***|4680<br>3840<br>3320<br>2720<br>2560|5200<br>4400<br>3600<br>2800<br>2800<br>2200|4000<br>4000<br>4000<br>2000<br>2000<br>1000|
|200|420|68<br>100<br>150<br>220<br>330<br>470<br>680|5.0×10.5×18.0<br>5.0×10.5×18.0<br>6.0×11.0×18.0<br>7.0×12.5×18.0<br>8.0×14.0×18.0<br>9.0×17.5×18.0<br>11.0×18.5×18.0|B32672L4683+***<br>B32672L4104+***<br>B32672L4154+***<br>B32672L4224+***<br>B32672L4334+***<br>B32672L4474+***<br>B32672L4684+***|4680<br>4680<br>3840<br>3320<br>2920<br>2560|5200<br>5200<br>4400<br>3600<br>3000<br>2800<br>2200|4000<br>4000<br>4000<br>4000<br>2000<br>2000<br>1000|
|250|630|33<br>47<br>68<br>100<br>150<br>220<br>390|5.0×10.5×18.0<br>5.0×10.5×18.0<br>6.0×11.0×18.0<br>7.0×12.5×18.0<br>8.5×14.5×18.0<br>9.0×17.5×18.0<br>11.0×18.5×18.0|B32672L6333+***<br>B32672L6473+***<br>B32672L6683+***<br>B32672L6104+***<br>B32672L6154+***<br>B32672L6224+***<br>B32672L6394J***|4680<br>4680<br>3840<br>3320<br>2720<br>2560|5200<br>5200<br>4400<br>3600<br>2800<br>2800<br>2200|4000<br>4000<br>4000<br>4000<br>2000<br>2000<br>1000|
|250|1000|10<br>15<br>22<br>33<br>47<br>68<br>100<br>150|5.0×10.5×18.0<br>5.0×10.5×18.0<br>5.0×10.5×18.0<br>6.0×11.0×18.0<br>7.0×12.5×18.0<br>8.5×14.5×18.0<br>9.0×17.5×18.0<br>11.0×18.5×18.0|B32672L0103+***<br>B32672L0153+***<br>B32672L0223+***<br>B32672L0333+***<br>B32672L0473+***<br>B32672L0683+***<br>B32672L0104+***<br>B32672L0154J***|4680<br>4680<br>4680<br>3840<br>3320<br>2720<br>2560|5200<br>5200<br>5200<br>4400<br>3600<br>2800<br>2800<br>2200|4000<br>4000<br>4000<br>4000<br>4000<br>2000<br>2000<br>1000|



MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerances on request. 

## **Composition of ordering code** 

+ = Capacitance tolerance code: K = ± 10% 

- J = ± 5% 

- *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 6 of 30 

**B32672L High V AC, high temperature (wound)** 

**Ordering codes and packing units (lead spacing 15 mm)** 

|VRMS<br>f≤1 kHz<br>V AC|VR<br>V DC|CR<br>nF|Max. dimensions<br>w×h×l<br>mm|Ordering code<br>(composition see<br>below)|Ammo<br>pack<br>pcs./MOQ|Reel<br>pcs./<br>MOQ|Untaped<br>pcs./<br>MOQ|
|---|---|---|---|---|---|---|---|
|500|1300|6.8<br>10<br>22<br>33<br>47<br>68|5.0×10.5×18.0<br>5.0×10.5×18.0<br>7.0×12.5×18.0<br>8.5×14.5×18.0<br>9.0×17.5×18.0<br>11.0×18.5×18.0|B32672L7682+***<br>B32672L7103+***<br>B32672L7223+***<br>B32672L7333+***<br>B32672L7473+***<br>B32672L7683J***|4680<br>4680<br>3320<br>2720<br>2560|5200<br>5200<br>3600<br>2800<br>2800<br>2200|4000<br>4000<br>4000<br>2000<br>2000<br>1000|
|600|1600|6.2<br>6.8<br>8.2<br>10<br>12<br>15<br>22<br>33<br>47|5.0×10.5×18.0<br>5.0×10.5×18.0<br>6.0×11.0×18.0<br>6.0×11.0×18.0<br>6.0×12.0×18.0<br>7.0×12.5×18.0<br>8.5×14.5×18.0<br>9.0×17.5×18.0<br>11.0×18.5×18.0|B32672L1622+***<br>B32672L1682+***<br>B32672L1822+***<br>B32672L1103+***<br>B32672L1123+***<br>B32672L1153+***<br>B32672L1223+***<br>B32672L1333+***<br>B32672L1473J***|4680<br>4680<br>3840<br>3840<br>3840<br>3320<br>2720<br>2560|5200<br>5200<br>4400<br>4400<br>4400<br>3600<br>2800<br>2800<br>2200|4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>2000<br>2000<br>1000|
|700|2000|1.0<br>1.2<br>1.5<br>2.2<br>2.7<br>3.3<br>3.9<br>4.7<br>5.6<br>6.2<br>6.8<br>8.2|5.0×10.5×18.0<br>5.0×10.5×18.0<br>5.0×10.5×18.0<br>5.0×10.5×18.0<br>5.0×10.5×18.0<br>5.0×10.5×18.0<br>5.0×10.5×18.0<br>5.0×10.5×18.0<br>6.0×11.0×18.0<br>6.0×11.0×18.0<br>6.0×11.0×18.0<br>6.0×12.0×18.0|B32672L8102+***<br>B32672L8122+***<br>B32672L8152+***<br>B32672L8222+***<br>B32672L8272+***<br>B32672L8332+***<br>B32672L8392+***<br>B32672L8472+***<br>B32672L8562+***<br>B32672L8622+***<br>B32672L8682+***<br>B32672L8822+***|4680<br>4680<br>4680<br>4680<br>4680<br>4680<br>4680<br>4680<br>3840<br>3840<br>3840<br>3840|5200<br>5200<br>5200<br>5200<br>5200<br>5200<br>5200<br>5200<br>4400<br>4400<br>4400<br>4400|4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000<br>4000|



MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerances on request. 

## **Composition of ordering code** 

- + = Capacitance tolerance code: K = ± 10% 

   - J = ± 5% 

- *** = Packaging code: 

   - 289 = Ammo pack 189 = Reel 

000 = Untaped (lead length 6 1 mm) 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 7 of 30 

## **B32672L** __ **High V AC, high temperature (wound)** 

**Ordering codes and packing units (lead spacing 15 mm)** 

|VRMS<br>f≤1 kHz<br>V AC|VR<br>V DC|CR<br>nF|Max. dimensions<br>w×h×l<br>mm|Ordering code<br>(composition see<br>below)|Ammo<br>pack<br>pcs./MOQ|Reel<br>pcs./<br>MOQ|Untaped<br>pcs./<br>MOQ|
|---|---|---|---|---|---|---|---|
|700|2000|10<br>12<br>15<br>22<br>33|7.0×12.5×18.0<br>8.5×14.5×18.0<br>8.5×14.5×18.0<br>9.0×17.5×18.0<br>11.0×18.5×18.0|B32672L8103+***<br>B32672L8123+***<br>B32672L8153+***<br>B32672L8223+***<br>B32672L8333J***|3320<br>2720<br>2720<br>2560|3600<br>2800<br>2800<br>2800<br>2200|4000<br>2000<br>2000<br>2000<br>1000|
|900|2000|0.68<br>1.0<br>1.2<br>1.5<br>2.2<br>2.7<br>3.3<br>3.9<br>4.7<br>5.6<br>6.2<br>6.8|5.0×10.5×18.0<br>5.0×10.5×18.0<br>6.0×11.0×18.0<br>6.0×11.0×18.0<br>7.0×12.5×18.0<br>8.0×14.5×18.0<br>8.5×14.5×18.0<br>9.0×17.5×18.0<br>9.0×17.5×18.0<br>11.0×18.5×18.0<br>11.0×18.5×18.0<br>11.0×18.5×18.0|B32672L9681+***<br>B32672L9102+***<br>B32672L9122J***<br>B32672L9152+***<br>B32672L9222+***<br>B32672L9272J***<br>B32672L9332+***<br>B32672L9392J***<br>B32672L9472+***<br>B32672L9562+***<br>B32672L9622J***<br>B32672L9682K***|4680<br>4680<br>3840<br>3840<br>3320<br>2920<br>2720<br>2560<br>2560|5200<br>5200<br>4400<br>4400<br>3600<br>3000<br>2800<br>2800<br>2800<br>2200<br>2200<br>2200|4000<br>4000<br>4000<br>4000<br>4000<br>2000<br>2000<br>2000<br>2000<br>1000<br>1000<br>1000|



MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series, intermediate capacitance values and closer tolerances on request. 

## **Composition of ordering code** 

- + = Capacitance tolerance code: K = ± 10% J = ± 5% 

- *** = Packaging code: 

   - 289 = Ammo pack 189 = Reel 

000 = Untaped (lead length 6 1 mm) 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 8 of 30 

## **B32671L ... B32672L High V AC, high temperature (wound)** 

## **Technical data** 

|Operating temperature range|Max. operating temperature Top,max<br>+125°C<br>Upper category temperature Tmax<br>+110°C<br>Lower category temperature Tmin<br>55°C<br>Rated temperature TR<br>+85°C|Max. operating temperature Top,max<br>+125°C<br>Upper category temperature Tmax<br>+110°C<br>Lower category temperature Tmin<br>55°C<br>Rated temperature TR<br>+85°C|Max. operating temperature Top,max<br>+125°C<br>Upper category temperature Tmax<br>+110°C<br>Lower category temperature Tmin<br>55°C<br>Rated temperature TR<br>+85°C|Max. operating temperature Top,max<br>+125°C<br>Upper category temperature Tmax<br>+110°C<br>Lower category temperature Tmin<br>55°C<br>Rated temperature TR<br>+85°C|Max. operating temperature Top,max<br>+125°C<br>Upper category temperature Tmax<br>+110°C<br>Lower category temperature Tmin<br>55°C<br>Rated temperature TR<br>+85°C|
|---|---|---|---|---|---|
|Dissipation factor tanδ(in 10-3)<br>at 20°C<br>(upper limit values)|at|≤27 nF|27 nF< CR≤0.1 µF|0.1 µF < CR≤1 µF|F<br>>1 µF|
||1 kHz<br>10 kHz<br>100 kHz|0.8<br>1.0<br>2.0|0.8<br>1.0<br>3.0|0.8<br>1.0|0.8|
|Insulation resistance Rins<br>at 20°C, rel. humidity≤65%<br>(minimum as-delivered values)<br>DC test voltage|> 100 GΩ(CR≤0.33 µF)<br>< 30000 s (CR> 0.33 µF)<br>1.6<br>VR, 2 s|||||
|Category voltage VC<br>(continuous operation with VDC<br>or VAC at f≤1 kHz)|TA (°C)<br>~~pf~~|DC voltage derating<br>~~pfee~~||AC voltage derating||
||TA≤85<br>85<TA≤110<br>~~pf~~|VC= VR<br>VC = VR<br>(165 TA)/80<br>~~pfee~~||VC,RMS= VRMS<br>VC,RMS=VRMS<br>(165 TA)/80||
|Operating voltage Vopfor<br>short operating periods<br>(VDC or VAC at f≤1 kHz)|TA (°C)<br>~~pf~~|DC voltage(max. hours)<br>~~pf ee~~||AC voltage(max. hours)||
||TA≤100<br>100<TA≤125<br>~~Pf~~|Vop= 1.25<br>VC(2000 h)<br>Vop = 1.25<br>VC(1000 h)<br>~~Pf~~||Vop= 1.0<br>VC,RMS(2000 h)<br>Vop = 1.0<br>VC,RMS(1000 h)||
|Damp heat test<br>Limit values after damp<br>heat test|56 days/40°C/93% relative humidity<br>Capacitance change ∆C/C<br>≤2%<br>Dissipation factor change∆tanδ<br>≤1.0<br>10-3 (at 1 kHz)<br>Insulation resistance Rins<br>≥50 GΩ<br>|||||||
|Reliability:<br>Failure rateλ<br>Service life tSL<br>Failure criteria:<br>Total failure<br>Failure due to variation<br>of parameters|1 fit (≤1<br>10-9/h) at 0.5<br>VR, 40°C<br>200 000 h at 1.0<br>VR, 85°C<br>For conversion to other operating conditions and temperatures,<br>refer to chapter "Quality, 2 Reliability".<br>Short circuit or open circuit<br>Capacitance change ∆C/C<br>> 10%<br>Dissipation factor tanδ<br>> 4<br>upper limit values<br>Insulation resistance Rins<br>< 1500 MΩ<br>|||||||



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 9 of 30 

~~ES~~ **B32671L ... B32672L High V AC, high temperature (wound)** 

## **Pulse handling capability** 

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/ µ s. 

"k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V[2] / µ s. 

## _Note:_ 

_The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor._ 

## **dV/dt values** 

|**dV/dt values**|||||||
|---|---|---|---|---|---|---|
|Lead spacing|10 mm||||||
|Type|B32671L<br>~~ee~~||||||
|VRMS (V AC)|200<br>~~ee~~|250||500|600|700|
|VR (V DC)|400<br>~~ee~~<br>~~ee~~|630<br>~~ee~~|1000<br>~~ee~~|1000<br>~~ee~~|1600<br>~~ee~~|2000|
|CR (nF)|dV/dt in V/µs<br>~~ee~~<br>~~ee~~||||||
|1.0|~~ee~~<br>~~ee~~|~~ee~~||||11000|
|1.2<br>~~Se~~|~~ee~~<br>~~ee~~<br>~~Se~~|~~ee~~|||6000|10000|
|1.5<br>~~Se~~|~~ee~~<br>~~Se~~<br>~~ee~~||||5600|9500|
|2.2<br>~~Se~~|~~Se~~<br>~~ee~~<br>~~ee~~||||5200|9000|
|2.7|~~ee~~<br>~~ee~~<br>~~Se~~||||5000|8600|
|3.3|~~ee~~<br>~~Se~~<br>~~ee~~|||4700|4700|8500|
|3.9|~~Se~~<br>~~ee~~<br>~~ee~~|||4300|4500|8200|
|4.7|~~ee~~<br>~~ee~~||810|3800|4000|8000|
|5.6|~~ee~~<br>~~a~~|||3400|||
|6.2|~~a~~<br>~~ee~~|||3200|||
|6.8|~~ee~~||810|3100|||
|8.2|~~ee~~<br>~~a~~|||2700|||
|10|~~a~~||810|2500|||
|12|~~a~~<br>~~Se~~|||2300|||
|15|~~Se~~|540|810||||
|22|400<br>~~Se~~<br>~~iee~~|540|810||||
|33|400<br>~~ee~~|540|||||
|47|400<br>~~ee~~<br>~~a~~|540|||||
|56|~~a~~<br>~~ee~~|540<br>|||||
|68|400<br>~~ee~~||||||
|100|400<br>~~eea~~|~~a~~|~~a~~|~~a~~|~~a~~||



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 10 of 30 

## ~~_L~~ **B32671L ... B32672L High V AC, high temperature (wound)** 

## **dV/dt values** 

|**dV/dt values**|||||||||
|---|---|---|---|---|---|---|---|---|
|Lead spacing|15 mm||||||||
|Type|B32672L||||||||
|VRMS (V AC)|160<br>~~a~~|200<br>~~a~~|250||500|600|700|900|
|VR (V DC)|250<br>~~a~~|420<br>~~a~~|630|1000|1300|1600|2000|2000|
|CR (nF)|dV/dt in V/µs<br>~~a~~||||||||
|0.68|~~a~~<br><br>~~a~~|~~a~~<br><br>~~a~~|~~eS~~<br>|||||15000|
|1.0|~~a~~<br>~~a~~|~~a ~~<br>~~a~~|~~eS~~<br>||||10000|15000|
|1.2|~~a~~|<br>~~a ~~|~~eS~~<br> ~~a~~||||9400|14100|
|1.5|~~a~~|~~a~~|||||9000|13500|
|2.2|~~a~~|~~a~~|||||7500|11000|
|2.7|~~a~~|~~a~~|||||7100|10600|
|3.3|~~a~~|~~a~~|||||6800|10000|
|3.9|~~a~~|~~a~~|||||6000|9000|
|4.7|~~i~~|~~ia~~|~~a~~||||5500|8200|
|5.6|~~a~~|~~a~~|||||5000|7500|
|6.2|~~i~~<br>~~i~~|~~i ~~|~~a~~<br>~~eS~~|||3600|4700|7000|
|6.8|~~i~~||~~eS~~||1000|3500|4500|6700|
|8.2|~~i~~<br>~~ia~~<br><br>~~i~~|~~ia~~<br><br>|~~eS~~<br>~~ia~~<br>~~eS~~<br>|||3100|4200||
|10|~~i~~<br>~~i~~|~~i ~~<br>|~~eS~~<br>|445|1000|2800|3900||
|12|~~i ~~|<br> ~~a~~|~~eS~~<br>~~a~~|||2600|3600||
|15|~~a~~|~~a~~||445||2300|3300||
|22|~~a~~|~~a~~||445|1000|2000|2900||
|33|~~a~~|~~a~~|300|445|1000|1700|2300||
|47|~~i~~|~~i~~|300|445|1000|1400|||
|56|~~a~~|~~a~~|||||||
|68|~~a~~|200<br>~~a~~|300|445|1000||||
|100|~~i~~|200<br>~~i~~|300|445|||||
|150|170<br>~~a~~|200<br>~~a~~|300|445|||||
|220|170<br>~~a~~|200<br>~~a~~|300||||||
|330|170<br>~~a~~|200<br>~~a~~|||||||
|390|~~i~~|~~i~~|300||||||
|470|170<br>~~a~~|200<br>~~a~~|||||||
|680|170<br>~~i~~|200<br>~~iSS~~|~~SS~~|~~SS~~|~~SS~~|~~SS~~|~~SS~~||
|1000|170<br>~~i~~||||||||



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 11 of 30 

## ~~ES~~ **B32671L ... B32672L** 

## **High V AC, high temperature (wound)** 

## **k0 values** 

|**k0 values0 values values**|||||||
|---|---|---|---|---|---|---|
|Lead spacing|10 mm||||||
|Type|B32671L<br>~~ee~~||||||
|VRMS (V AC)|200<br>~~ee~~<br>~~ee~~|250<br>||500<br>|600<br>|700|
|VR (V DC)|400<br>~~ee~~<br>~~ee~~|630<br>|1000<br>|1000<br>|1600<br>|2000|
|CR (nF)|k0in V2/µs<br>~~ee~~<br>~~aee~~<br>~~es~~||||||
|1.0|~~ee~~<br>~~es~~|~~ee~~<br>|~~ee~~<br>|~~ee~~<br>~~a~~<br>|~~ee~~<br>~~ee~~<br>|25000000<br>~~ee~~|
|1.2|~~es~~<br>~~es~~<br>~~es~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~a~~<br>~~ee~~|14400000<br>~~ee~~<br>~~ee~~|23000000<br>~~ee~~|
|1.5|~~es~~<br>~~es~~<br>~~es~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~a ~~<br>~~ee~~|14000000<br> ~~ee~~<br>~~ee~~|22500000<br>~~ee~~|
|2.2|~~es ~~<br>~~es~~<br>~~es~~|~~ee~~<br> ~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~ee~~|13800000<br>~~ee~~|22000000|
|2.7|<br>~~es~~<br>~~es~~<br>~~es~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~||13600000|21500000|
|3.3|~~es~~<br>~~es~~<br>~~ee~~|~~ee~~<br>|~~ee~~<br>|9400000<br>|13300000<br>|21000000|
|3.9|~~es~~<br>~~ee~~|||8600000<br>|13100000<br>|20900000|
|4.7|~~eeee~~<br>~~es ee~~|~~ee~~<br>~~ee~~|400000<br>~~ee~~<br>~~ee~~|8200000<br>~~ee~~<br>~~ee~~|12000000<br>~~ee~~<br>~~ee~~|20800000|
|5.6|~~es ee~~<br>~~es~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|7600000<br>~~ee~~<br>~~ee~~|~~ee~~||
|6.2|~~es ee~~<br>~~es~~<br>~~es~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~ee ~~<br>~~ee~~<br>~~ee~~|6800000<br> ~~ee~~<br>~~ee~~|~~ee~~||
|6.8|~~es ~~<br>~~es~~<br>~~es~~|~~ee~~<br>~~ee~~<br>~~ee~~|400000<br>~~ee ~~<br>~~ee~~<br>~~ee~~|6200000<br> ~~ee~~|||
|8.2|~~es~~<br>~~es~~<br>~~es~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~<br>~~ee~~|5400000<br>~~ee~~|||
|10|~~es~~<br>~~es~~<br>~~es~~|~~ee~~<br>~~ee~~<br>~~es~~|400000<br>~~ee~~<br>~~ee~~<br>~~es~~|5000000<br>~~ee~~<br>~~ee~~|||
|12|~~es~~<br>~~es~~<br>~~es~~|~~ee~~<br>~~es~~<br>~~ee~~|~~ee ~~<br>~~es~~<br>~~ee~~|4600000<br> ~~ee~~<br>~~ee~~<br>~~ee~~|~~ee~~||
|15|~~es~~<br>~~es~~<br>~~ee~~|200000<br>~~es~~<br>~~ee~~|400000<br>~~es ~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~ee~~||
|22|150000<br>~~es~~<br>~~ee~~<br>~~ee~~|200000<br>~~ee~~<br>~~ee~~|400000<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~||
|33|150000<br>~~ee~~<br>~~ee~~<br>~~ee~~|200000<br>~~ee~~|~~ee~~|~~ee~~|~~ee~~||
|47|150000<br>~~ee~~<br>~~ee~~<br>~~es~~<br>~~es~~|200000<br>~~ee~~<br>~~es~~<br>|~~ee~~<br>~~es~~<br>|~~ee~~<br>~~es~~<br>~~a~~<br>|~~ee~~<br>~~es~~<br>~~ee~~<br>|~~ee~~|
|56|~~ee~~<br>~~es~~<br>~~es~~|200000<br>~~es~~<br>|~~es~~<br>|~~es~~<br>~~a~~<br>|~~es~~<br>~~ee~~<br>|~~ee~~|
|68|150000<br>~~es~~<br>~~es~~|~~es~~<br>~~ee~~|~~es~~<br>~~ee~~|~~es~~<br>~~a~~<br>~~ee~~|~~es~~<br>~~ee~~<br>~~ee~~|~~ee~~|
|100|150000<br>~~es~~<br>~~ee~~|~~ee~~|~~ee~~|~~a~~<br><br>~~ee~~|~~ee~~<br><br>~~ee~~|~~ee~~|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 12 of 30 

## ~~_L~~ **B32671L ... B32672L High V AC, high temperature (wound)** 

## **k0 values** 

|**k0 values0 values values**|||||||||
|---|---|---|---|---|---|---|---|---|
|Lead spacing|15 mm||||||||
|Type|B32672L||||||||
|VRMS (V AC)<br>~~Se~~|160<br>~~Se~~|200|250||500|600|700|900|
|VR (V DC)<br>~~Se~~|250<br>~~Se~~|420|630|1000|1300|1600|2000|2000|
|CR (nF)<br>~~Se~~|k0in V2/µs<br>~~Se~~<br>~~eS~~||||||||
|0.68|~~eS~~<br>~~eS~~|||||||30000000|
|1.0|~~eS~~<br>~~eS~~<br>~~eS~~||||||20300000|30000000|
|1.2|~~eS~~<br>~~eS~~<br>~~eS~~||||||19600000|29400000|
|1.5|~~eS~~<br>~~eS~~<br>~~eS~~|~~eS~~|||||19200000|28000000|
|2.2|~~eS~~<br>~~eS~~<br>~~eS~~|~~eS~~|||||18600000|27500000|
|2.7|~~eS ~~<br>~~eS~~|~~eS~~|||||18200000|27300000|
|3.3|~~eS~~<br>~~ieS~~||||||18000000|27000000|
|3.9|~~eS~~<br>~~eS~~||||||16800000|25200000|
|4.7|~~eS~~<br>~~eS~~||||||15800000|23500000|
|5.6|~~eS~~<br>~~ieS~~||||||13100000|19500000|
|6.2|~~eS~~<br>~~i~~|~~eS~~||||11520000|12700000|19000000|
|6.8<br>~~Se~~|~~eS~~<br>~~i~~<br>~~Se~~|~~eS~~|||3000000|11200000|12300000|18400000|
|8.2<br>~~Se~~<br>~~Se~~|~~i~~<br>~~Se~~<br>~~Se~~|~~eS~~<br>~~a~~||||9920000|11800000||
|10<br>~~Se~~<br>~~Se~~|~~Se~~<br>~~Se~~<br>~~eS a~~|~~a~~<br>~~a~~|~~a~~|1000000|3000000|8960000|11100000||
|12<br>~~Se~~|~~Se ~~<br>~~eS a~~|~~a~~<br>~~a~~|~~a~~|||8320000|10600000||
|15|~~eS a~~<br>~~aa~~|~~a ~~<br>~~aa~~|~~a~~<br>~~aa~~|1000000<br>~~aa~~|~~aa~~|7360000|10400000||
|22|~~a~~|~~a~~<br>~~a~~|~~a~~|1000000|3000000|6400000|9300000||
|33<br>~~SS~~|~~a~~<br>~~SS~~||500000|1000000|3000000|5440000|9000000||
|47<br>~~SS~~|~~SS~~<br>~~eS~~||500000|1000000|3000000|4480000|||
|56<br>~~SS~~|~~SS~~<br>~~eS~~<br>~~eS~~||||||||
|68|~~eS~~<br>~~eS~~<br>~~eS~~|120000|500000|1000000|3000000||||
|100|~~eS~~<br>~~eS~~|120000|500000|1000000|||||
|150|100000<br>~~eS~~<br>~~a~~<br>~~ee~~|120000<br>~~a~~|500000|1000000|||||
|220|100000<br>~~ee~~<br>~~ee~~|120000|500000||||||
|330|100000<br>~~ee~~<br>~~ee~~<br>~~eS~~|120000|||||||
|390|~~ee~~<br>~~eS~~<br>~~ee~~||500000||||||
|470|100000<br>~~eS~~<br>~~ee~~<br>~~ee~~|120000|||||||
|680|100000<br>~~ee~~<br>~~ee~~<br>~~ee~~||||||||
|1000|100000<br>~~ee~~<br>~~ee~~||||||||



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 13 of 30 

**B32671L ... B32672L** ~~ee~~ 

## **High V AC, high temperature (wound)** 

## **Impedance Z versus frequency f** 

(typical values) 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 14 of 30 

**==> picture [331 x 169] intentionally omitted <==**

**----- Start of picture text -----**<br>
B32671L<br>High V AC, high temperature (wound)<br>_<br>Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA  ≤ 100  ° C)<br>For TA >100  ° C, please refer to "General technical information", section 3.2.3.<br>Lead spacing 10 mm<br>400 V DC/200 V AC 630 V DC/250 V AC<br>- R<br>=) c. saniii<br>cai FrHtt<br>oe<br>if<br>_ en<br>**----- End of picture text -----**<br>


1000 V DC/250 V AC 

1000 V DC/500 V AC 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 15 of 30 

## **B32671L** _ **High V AC, high temperature (wound)** 

**Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA** ≤ **100** ° **C)** For TA >100 ° C, please refer to "General technical information", section 3.2.3. 

## **Lead spacing 10 mm** 

1600 V DC/600 V AC 

**==> picture [77 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
2000 V DC/700 V AC<br>**----- End of picture text -----**<br>


Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 16 of 30 

**B32672L** [LLL **High V AC, high temperature (wound)** 

**Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA** ≤ **100** ° **C)** For TA >100 ° C, please refer to "General technical information", section 3.2.3. 

## **Lead spacing 15 mm** 

250 V DC/160 V AC 

420 V DC/200 V AC 

630 V DC/250 V AC 

1000 V DC/250 V AC 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 17 of 30 

~~ee~~ **B32672L** 

## **High V AC, high temperature (wound)** 

**Permissible AC voltage VRMS versus frequency f (for sinusoidal waveforms TA** ≤ **100** ° **C)** For TA >100 ° C, please refer to "General technical information", section 3.2.3. 

## **Lead spacing 15 mm** 

1300 V DC/500 V AC 

1600 V DC/600 V AC 

2000 V DC/700 V AC 

2000 V DC/900 V AC 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 18 of 30 

~~ee~~ **B32671L ... B32672L High V AC, high temperature (wound)** 

## **Operation at overvoltages during heating and ignition of lamps (TA** ≤ **40** ° **C)** 

In lighting applications, the capacitors can be subjected to overvoltages during the heating and ignition periods. An overvoltage occurs when the operation voltage exceeds the permissible AC voltage at the resonant frequency fr. 

For a repetitive application of on/off switching pulses (as for example in the life tests applied by electronic ballast manufacturers), limits have to be imposed on the time periods under overvoltage and on the duty cycle, in order to keep the capacitance value within the required margins: 

The overvoltage time tOV should be less than 1 sec. 

The maximum duty cycle of the overvoltage is given by 

where VRMS,ov is the RMS voltage during period tOV 

and VRMS is the permissible AC voltage for continuous operation at the resonant frequency fr (given by the “permissible AC voltage versus frequency f” graphics in theprevious pages). 

The drift of capacitance depends on the Vpp attained, and the total time under overvoltage, which is calculated in hours as follows: 

- (Ni tOV) / 3600 

where Ni is the number of overvoltage impulses and tOV is expressed in seconds. 

The maximum drift of capacitance as a function of both parameters is provided graphically in the following pages. 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 19 of 30 

## **B32671L** co| ~~|~~ **High V AC, high temperature (wound)** ~~|~~ 10 **Estimation of the maximum drift of capacitance value in function of the number of total hours overvoltage** 

## **Lead spacing 10 mm** 

500 V AC/1000 V DC 

## 600 V AC/1600 V DC 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 20 of 30 

## **B32672L** _ ~~[EEE]~~ **High V AC, high temperature (wound)** 

**Estimation of the maximum drift of capacitance value in function of the number of total hours overvoltage** 

## **Lead spacing 15 mm** 

600 V AC/1600 V DC 

## 700 V AC/2000 V DC 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 21 of 30 

**==> picture [147 x 33] intentionally omitted <==**

**----- Start of picture text -----**<br>
B32671L ... B32672L<br>_<br>High V AC, high temperature (wound)<br>**----- End of picture text -----**<br>


## **Mounting guidelines** 

## **1 Soldering** 

## **1.1 Solderability of leads** 

The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. 

Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 ° C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. 

|Solder bath temperature|235±5°C|
|---|---|
|Solderingtime|2.0±0.5 s|
|Immersion depth|2.0 +0/ 0.5 mm from capacitor bodyor seating plane|
|Evaluation criteria:<br>Visual inspection|Wettingof wire surface bynew solder≥90%, free-flowingsolder|



## **1.2 Resistance to soldering heat** 

Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: 

|Series|Solder bath temperature|Solderingtime|
|---|---|---|
|MKT<br>boxed (except 2.5×6.5×7.2 mm)<br>coated<br>uncoated(lead spacing> 10 mm)|260±5°C|10±1 s|
|MFP<br>MKP<br>(lead spacing> 7.5 mm)|||
|MKT<br>boxed(case 2.5×6.5×7.2 mm)||5±1 s|
|MKP<br>MKT<br>(lead spacing≤7.5 mm)<br>uncoated (lead spacing≤10 mm)<br>insulated (B32559)||< 4 s<br>recommended soldering<br>profile for MKT uncoated<br>(lead spacing≤10 mm) and<br>insulated(B32559)|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 22 of 30 

## **B32671L ... B32672L** ~~_L~~ **High V AC, high temperature (wound)** 

|Immersion depth|2.0 +0/ 0.5 mm from capacitor bodyor seating plane|
|---|---|
|Shield|Heat-absorbing board, (1.5±0.5) mm thick, between capacitor<br>bodyand liquid solder|
|Evaluation criteria:<br>Visual inspection<br>∆C/C0<br>tanδ|No visible damage<br>2% for MKT/MKP/MFP<br>5% for EMI suppression capacitors<br>As specified in sectional specification|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 23 of 30 

**B32671L ... B32672L** _ **High V AC, high temperature (wound)** 

## **1.3 General notes on soldering** 

Permissible heat exposure loads on film capacitors are primarily characterized by the upper category temperature Tmax. Long exposure to temperatures above this type-related temperature limit can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics. For short exposures (as in practical soldering processes) the heat load (and thus the possible effects on a capacitor) will also depend on other factors like: 

- Pre-heating temperature and time 

- Forced cooling immediately after soldering 

- Terminal characteristics: 

- diameter, length, thermal resistance, special configurations (e.g. crimping) 

- Height of capacitor above solder bath 

- Shadowing by neighboring components 

- Additional heating due to heat dissipation by neighboring components 

- Use of solder-resist coatings 

The overheating associated with some of these factors can usually be reduced by suitable countermeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced cooling process may possibly have to be included. 

EPCOS recommends the following conditions: 

- Pre-heating with a maximum temperature of 110 ° C 

Temperature inside the capacitor should not exceed the following limits: 

- MKP/MFP 110 ° C 

- MKT 160 ° C 

- When SMD components are used together with leaded ones, the leaded film capacitors should not pass into the SMD adhesive curing oven. The leaded components should be assembled after the SMD curing step. 

Leaded film capacitors are not suitable for reflow soldering. 

## **Uncoated capacitors** 

For uncoated MKT capacitors with lead spacings ≤ 10 mm (B32560/B32561) the following measures are recommended: 

pre-heating to not more than 110 ° C in the preheater phase 

rapid cooling after soldering 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 24 of 30 

## **B32671L ... B32672L** ~~ee~~ **High V AC, high temperature (wound)** 

## **Cautions and warnings** 

Do not exceed the upper category temperature (UCT). Do not apply any mechanical stress to the capacitor terminals. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after it has been soldered to the PC board. Do not pick up the PC board by the soldered capacitor. 

Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified lead spacing. 

Do not exceed the specified time or temperature limits during soldering. Avoid external energy inputs, such as fire or electricity. Avoid overload of the capacitors. 

The table below summarizes the safety instructions that must always be observed. A detailed description can be found in the relevant sections of the chapters "General technical information" and "Mounting guidelines". 

|Topic|Safety information|Reference chapter<br>"General technical<br>information"|
|---|---|---|
|Storage conditions|Make sure that capacitors are stored within the<br>specified range of time, temperature and humidity<br>conditions.|4.5<br>"Storage conditions"|
|Flammability|Avoid external energy, such as fire or electricity<br>(passive flammability), avoid overload of the<br>capacitors (active flammability) and consider the<br>flammabilityof materials.|5.3<br>"Flammability"|
|Resistance to<br>vibration|Do not exceed the tested ability to withstand<br>vibration. The capacitors are tested to<br>IEC 60068-2-6.<br>EPCOS offers film capacitors specially designed<br>for operation under more severe vibration regimes<br>such as those found in automotive applications.<br>Consult our catalog "Film Capacitors for<br>Automotive Electronics".|5.2<br>"Resistance to vibration"|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 25 of 30 

## **B32671L ... B32672L** _ **High V AC, high temperature (wound)** 

|Topic|Safety information|Reference chapter<br>"Mounting guidelines"|
|---|---|---|
||Do not exceed the specified time or temperature<br>limits duringsoldering.||
||Use onlysuitable solvents for cleaningcapacitors.||
||When embedding finished circuit assemblies in<br>plastic resins, chemical and thermal influences<br>must be taken into account.<br>Caution: Consult us first, if you also wish to<br>embed other uncoated component types!||



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 26 of 30 

## **B32671L ... B32672L** ~~———~~ **High V AC, high temperature (wound)** 

## **Symbols and terms** 

|Symbol|English|German|
|---|---|---|
|α<br>αC<br>A<br>βC<br>C<br>CR<br>∆C<br>∆C/C<br>∆C/CR<br>dt<br>∆t<br>∆T<br>∆tanδ<br>∆V<br>dV/dt<br>∆V/∆t<br>E<br>ESL<br>ESR<br>f<br>f1<br>f2<br>fr<br>FD<br>FT<br>i<br>IC|Heat transfer coefficient<br>Temperature coefficient of capacitance<br>Capacitor surface area<br>Humidity coefficient of capacitance<br>Capacitance<br>Rated capacitance<br>Absolute capacitance change<br>Relative capacitance change (relative<br>deviation of actual value)<br>Capacitance tolerance (relative deviation<br>from rated capacitance)<br>Time differential<br>Time interval<br>Absolute temperature change<br>(self-heating)<br>Absolute change of dissipation factor<br>Absolute voltage change<br>Time differential of voltage function (rate<br>of voltage rise)<br>Voltage change per time interval<br>Activation energy for diffusion<br>Self-inductance<br>Equivalent series resistance<br>Frequency<br>Frequency limit for reducing permissible<br>AC voltage due to thermal limits<br>Frequency limit for reducing permissible<br>AC voltage due to current limit<br>Resonant frequency<br>Thermal acceleration factor for diffusion<br>Derating factor<br>Current (peak)<br>Category current (max. continuous<br>current)|Wärmeübergangszahl<br>Temperaturkoeffizient der Kapazität<br>Kondensatoroberfläche<br>Feuchtekoeffizient der Kapazität<br>Kapazität<br>Nennkapazität<br>Absolute Kapazitätsänderung<br>Relative Kapazitätsänderung (relative<br>Abweichung vom Ist-Wert)<br>Kapazitätstoleranz (relative Abweichung<br>vom Nennwert)<br>Differentielle Zeit<br>Zeitintervall<br>Absolute Temperaturänderung<br>(Selbsterwärmung)<br>Absolute Änderung des Verlustfaktors<br>Absolute Spannungsänderung<br>Differentielle Spannungsänderung<br>(Spannungsflankensteilheit)<br>Spannungsänderung pro Zeitintervall<br>Aktivierungsenergie zur Diffusion<br>Eigeninduktivität<br>Ersatz-Serienwiderstand<br>Frequenz<br>Grenzfrequenz für thermisch bedingte<br>Reduzierung der zulässigen<br>Wechselspannung<br>Grenzfrequenz für strombedingte<br>Reduzierung der zulässigen<br>Wechselspannung<br>Resonanzfrequenz<br>Therm. Beschleunigungsfaktor zur<br>Diffusion<br>Deratingfaktor<br>Stromspitze<br>Kategoriestrom (max. Dauerstrom)|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 27 of 30 

## **B32671L ... B32672L** _ **High V AC, high temperature (wound)** 

|Symbol|English|German|
|---|---|---|
|IRMS<br>iz<br>k0<br>LS<br>λ<br>λ0<br>λtest<br>Pdiss<br>Pgen<br>Q<br>ρ<br>R<br>R<br>Ri<br>Rins<br>RP<br>RS<br>S<br>t<br>T<br>τ<br>tanδ<br>tanδD<br>tanδP<br>tanδS<br>TA<br>Tmax<br>Tmin<br>tOL<br>Top<br>TR<br>Tref<br>tSL<br>VAC|(Sinusoidal) alternating current,<br>root-mean-square value<br>Capacitance drift<br>Pulse characteristic<br>Series inductance<br>Failure rate<br>Constant failure rate during useful<br>service life<br>Failure rate, determined by tests<br>Dissipated power<br>Generated power<br>Heat energy<br>Density of water vapor in air<br>Universal molar constant for gases<br>Ohmic resistance of discharge circuit<br>Internal resistance<br>Insulation resistance<br>Parallel resistance<br>Series resistance<br>severity (humidity test)<br>Time<br>Temperature<br>Time constant<br>Dissipation factor<br>Dielectric component of dissipation<br>factor<br>Parallel component of dissipation factor<br>Series component of dissipation factor<br>Ambient temperature<br>Upper category temperature<br>Lower category temperature<br>Operating life at operating temperature<br>and voltage<br>Operating temperature<br>Rated temperature<br>Reference temperature<br>Reference service life<br>AC voltage|(Sinusförmiger) Wechselstrom<br>Inkonstanz der Kapazität<br>Impulskennwert<br>Serieninduktivität<br>Ausfallrate<br>Konstante Ausfallrate in der<br>Nutzungsphase<br>Experimentell ermittelte Ausfallrate<br>Abgegebene Verlustleistung<br>Erzeugte Verlustleistung<br>Wärmeenergie<br>Dichte von Wasserdampf in Luft<br>Allg. Molarkonstante für Gas<br>Ohmscher Widerstand des<br>Entladekreises<br>Innenwiderstand<br>Isolationswiderstand<br>Parallelwiderstand<br>Serienwiderstand<br>Schärfegrad (Feuchtetest)<br>Zeit<br>Temperatur<br>Zeitkonstante<br>Verlustfaktor<br>Dielektrischer Anteil des Verlustfaktors<br>Parallelanteil des Verlfustfaktors<br>Serienanteil des Verlustfaktors<br>Umgebungstemperatur<br>Obere Kategorietemperatur<br>Untere Kategorietemperatur<br>Betriebszeit bei Betriebstemperatur und<br>-spannung<br>Beriebstemperatur<br>Nenntemperatur<br>Referenztemperatur<br>Referenz-Lebensdauer<br>Wechselspannung|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 28 of 30 

|**B32671L ... B32672L**<br>**High V AC, high temperature (wound)**<br>_||||
|---|---|---|---|
|||||
|Symbol<br>English<br>German<br>VC<br>Category voltage<br>Kategoriespannung<br>VC,RMS<br>Category AC voltage<br>(Sinusförmige)<br>Kategorie-Wechselspannung<br>VCD<br>Corona-discharge onset voltage<br>Teilentlade-Einsatzspannung<br>Vch<br>Charging voltage<br>Ladespannung<br>VDC<br>DC voltage<br>Gleichspannung<br>VFB<br>Fly-back capacitor voltage<br>Spannung (Flyback)<br>Vi<br>Input voltage<br>Eingangsspannung<br>Vo<br>Output voltage<br>Ausgangssspannung<br>Vop<br>Operating voltage<br>Betriebsspannung<br>Vp<br>Peak pulse voltage<br>Impuls-Spitzenspannung<br>Vpp<br>Peak-to-peak voltage Impedance<br>Spannungshub<br>VR<br>Rated voltage<br>Nennspannung<br>R<br>Amplitude of rated AC voltage<br>Amplitude der Nenn-Wechselspannung<br>VRMS<br>(Sinusoidal) alternating voltage,<br>root-mean-square value<br>(Sinusförmige) Wechselspannung<br>VSC<br>S-correction voltage<br>Spannung bei Anwendung "S-correction"<br>Vsn<br>Snubber capacitor voltage<br>Spannung bei Anwendung<br>"Beschaltung"<br>Z<br>Impedance<br>Scheinwiderstand<br>Lead spacing<br>Rastermaß<br>v~~ia~~||||
|Page 29 of 30<br>Please read_Cautions and warnings_and||||
|_Important notes_at the end of this document.||||



~~ke~~ **Important notes** 

The following applies to all products named in this publication: 

1. Some parts of this publication contain **statements about the suitability of our products for certain areas of application** . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out **that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application** . As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 

2. We also point out that **in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified** . In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 

3. **The warnings, cautions and product-specific notes must be observed.** 

4. In order to satisfy certain technical requirements, **some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous)** . Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 

5. We constantly strive to improve our products. Consequently, **the products described in this publication may change from time to time** . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also **reserve the right to discontinue production and delivery of products** . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 

6. Unless otherwise agreed in individual contracts, **all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI)** . 

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are **trademarks registered or pending** in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 

Page 30 of 30