B32355C4255J019

## **Film Capacitors – AC Capacitors** 

## Motor run capacitors 

|**Series/Type:**|**MotorCap S3 Compact, 100 ˚C**|
|---|---|
|**Ordering code:**|**B32355C**|
|Date:|May 2024|
|Version:|3|



© TDK Electronics AG 2024. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. 

**Film Capacitors – AC Capacitors Motor run capacitors** 

**B32355C** 

## **MotorCap S3 Compact, 100 ˚C** 

## **Construction** 

- Metallized polypropylene film 

- Plastic can with resin top 

- Dry type resin 

## **Features** 

- Self-healing properties 

- Low dissipation factor 

- Highest safety level S3 safety class to IEC60252-1 (ed.2) am1: 

- High insulation resistance 

- IEC 60335-1 compatible 

- Higher operating temperature class,100 °C. 

## **Applications** 

- For general sine wave applications, mainly as motor run capacitor 

## **Terminals** 

- Insulated solid copper wire, 0.5 mm[2] ,105°C. 

## **Mounting parts (optional)** 

- Plain can 

|Reference standards|IEC 60252-1+A1:2013|
|---|---|
|Life expectancy to IEC 60252-1+A1:2013|400 V: 10000 h (class B)|
|Safety class to IEC 60252-1+A1:2013|S3|
|Rated capacitance CR|See table ordering codes, page 5|
|Tolerance|5%|
|Permitted capacitanceC/C|3%|
|Rated voltage VR|400 V AC|
|Rated frequency fR|50/60 Hz|



CAP RD FILM PD AC 

May 2024 

Page 2 of 7 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

## **Film Capacitors – AC Capacitors B32355C Motor run capacitors MotorCap S3 Compact, 100 ˚C** 

|**Test data**||
|---|---|
|AC test voltage terminal to terminal VTT|2 VR, 2 s (routine test)|
|AC test voltage terminals to can VTC|2 kV AC, 2 s (routine test)|
|Insulation resistance Rinsor time constantat 20|3000 s|
|°C,||
|Rel. humidity max. value 85%, annual means65%||
|Dissipation factor tanat 20 °C|7 ∙10-3(1kHz)|
|Maximum rate of voltage rise dv/dtmax|10 V/s|
|**Climatic data**||
|Climatic category|25/100/21 to IEC 60068-1|
|Lower category Tmin|–25 °C|
|Upper category Tmax|+100 °C|
|Damp heat test Ttest|21 days @ 40°C, 93% RH|
|**Mechanical and thermal properties**||
|Ball pressure test to IEC 60309-1 sec. 27.3|20 N at 125 °C|
|Plastic can and top disk material|Compliant to EN60252-1/ IEC60335-1|
|◼ Glow wire test to IEC 60695 – 2 – 1 / 1|Self-extinguish within 30 s of withdrawing glow wire|
|Test temp 550 º C for IR  0.5 A|without igniting wrapping tissue|
|Test temp 850 º C for IR≥0.5 A||
|◼ Part  compliant to IEC 60335-1<br>Glow wire test acc. to  EN60335-1:2002<br>+A11+A1  +A12+Corr.+A2:2006, IEC60335-1<br>ed 4+A1+A2|Self-extinguish within 2 s with GWT 750 ºC and within<br>30 s with GWFI 850 ºC of withdrawing the glow wire &<br>without igniting the wrapping tissue|
|Tracking test to IEC 60112 solution A|>250 V|
|**Compatibility to RoHS**||
|Compliance to directive 2002/95/EC||
||compatible|
|**Approvals**||
|**VDE**– 400 V/100 °C: 10000 h (class B)|Approved|
||Compliance to LV directive 2014/35/EU|



## **Marking** 

CAP RD FILM PD AC 

May 2024 

Page 3 of 7 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

~~LT~~ **Film Capacitors – AC Capacitors B32355C Motor run capacitors MotorCap S3 Compact, 100 ˚C** 

## **Dimensional drawing** 

Ø2 ±0.5 ~~q~~ ØD ±0.5 ~~I~~ 

CAP RD FILM PD AC 

May 2024 

Page 4 of 7 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

~~>~~ **Film Capacitors – AC Capacitors B32355C Motor run capacitors MotorCap S3 Compact, 100 ˚C** 

## **Ordering codes & Packaging units** 

|VR<br>V AC|CR<br>µF<br>~~ee~~|Dimensions<br>D × L<br>mm<br>~~ee~~<br>|Ordering code<br>|Packing units<br>pcs|
|---|---|---|---|---|
|400|1.5<br>~~a~~<br>~~ee~~|25 × 51<br>~~a~~<br>~~ee~~<br>|B32355C4155J019<br>~~a~~<br>|231<br>~~a~~|
||2.0<br>~~a~~<br>~~ee~~<br>~~rs~~<br>~~rs~~|25 × 51<br>~~a~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|B32355C4205J019<br>~~a~~<br>~~ee~~<br>~~ee~~|231<br>~~a~~<br>~~ee~~|
||2.5<br>~~ee~~<br>~~rs~~<br>~~rs~~<br>~~ee~~|25 × 51<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|B32355C4255J019<br>~~ee~~<br>~~ee~~<br>~~ee~~|231<br>~~ee~~|
||3<br><br>~~rs~~<br>~~rs~~<br>~~ee~~<br>~~ee~~|25 × 60.5<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|B32355C4305J015<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|198<br>~~ee~~<br>~~ee~~|
||3.5<br>~~rs~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|25 × 60.5<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|B32355C4355J015<br>~~ee~~<br>~~ee~~<br>~~ee~~|198<br>~~ee~~<br>~~ee~~|
||4<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|25 × 75<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|B32355C4405J015<br>~~ee~~<br>~~ee~~|180<br>~~ee~~|
||5<br>~~ee~~<br>~~ee~~<br>~~ee~~|25 × 75<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|B32355C4505J015<br>~~ee~~|180<br>~~ee~~|
||8<br>~~ee~~<br>~~ee~~|30 × 78<br>~~ee~~<br>~~ee~~<br>~~ee~~|B32355C4805J015|108|



## **Display of ordering codes for TDK Electronics products** 

The ordering code for one and the same product can be represented differently in data sheets, data books, other publications, on the company website, or in order-related documents such as shipping notes, order confirmations and product labels. **The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products** . Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes. 

## **Cautions and warnings** 

Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power Capacitors” issued by ZVEI, which are available on the internet at www.tdkelectronics.tdk.com/ac_capacitors, to ensure optimum performance and to prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are kindly requested to approve our product specifications or request our approval for our specification before ordering. 

CAP RD FILM PD AC 

May 2024 

Page 5 of 7 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

~~LT~~ **Important notes** 

The following applies to all products named in this publication: 

1. Some parts of this publication contain **statements about the suitability of our products for certain areas of application** . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out **that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application.** As a rule we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 

2. We also point out that **in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.** In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 

3. **The warnings, cautions and product-specific notes must be observed.** 

4. In order to satisfy certain technical requirements, **some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous)** . Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 

5. We constantly strive to improve our products. Consequently, **the products described in this publication may change from time to time** . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. 

We also **reserve the right to discontinue production and delivery of products** . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 

6. Unless otherwise agreed in individual contracts, **all orders are subject to our General Terms and Conditions of Supply.** 

7. **Our manufacturing sites serving the automotive business apply the IATF 16949 standard.** The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that **only requirements mutually agreed upon can and will be implemented in our Quality Management System.** For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 

Page 6 of 7 

## ~~LT~~ **Important notes** 

8. The trade names EPCOS, CarXield, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, FilterCap, FormFit, InsuGate, LeaXield, MediPlas, MiniBlue, MiniCell, MKD, MKK, ModCap, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PiezoBrush, PlasmaBrush, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SurfIND, ThermoFuse, WindCap, XieldCap are **trademarks registered or pending** in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. 

## Release 2024-02 

Page 7 of 7