Image not available
Illustrative purposes only
APQ2X-2
SENSORS
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: BANNER ENGINEERING
- Product type:
- SVHC: No SVHC (15-Jan-2018)
| Delivery and price | |
|---|---|
| Units per pack | 1 |
| Price | 22.19 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**==> picture [148 x 792] intentionally omitted <==** Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor Original Instructions p/n: 226597 Rev. E 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor ## Contents **Chapter 1 Features.................................................................................................................. 3** Models ........................................................................................................................................................................................................... 3 Overview........................................................................................................................................................................................................ 4 **Chapter 2 Installation.............................................................................................................. 5** Mount the Device........................................................................................................................................................................................... 5 Wiring............................................................................................................................................................................................................. 5 **Chapter 3 Specifications ........................................................................................................ 7** FCC Part 15 Class B for Unintentional Radiators.......................................................................................................................................... 7 Industry Canada ICES-003(B)....................................................................................................................................................................... 8 Dimensions.................................................................................................................................................................................................... 8 Performance Curves...................................................................................................................................................................................... 8 **Chapter 4 Accessories.......................................................................................................... 10** Cordsets ...................................................................................................................................................................................................... 10 Brackets........................................................................................................................................................................................................11 Reflectors .................................................................................................................................................................................................... 12 Aperture Kits................................................................................................................................................................................................ 13 **Chapter 5 Product Support and Maintenance .................................................................... 14** Clean with Mild Detergent and Warm Water ............................................................................................................................................... 14 Repairs ........................................................................................................................................................................................................ 14 Contact Us................................................................................................................................................................................................... 14 Banner Engineering Corp Limited Warranty................................................................................................................................................ 14 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com Q2XLP Polarized Retroreflective And Q2XER Opposed Mode Sensor ## Chapter Contents Models.................................................................................................................................................................................................................. 3 Overview .............................................................................................................................................................................................................. 4 ## Chapter 1 ## Features Compact sensors featuring extended range and background suppression mode - Compact 8 mm (0.31 in) wide sensor for installation in the smallest of spaces - Exceptional optical performance with long detection range - Emitter/receiver pair with a large spot for easy alignment - Polarized retroreflective models for one-sided installation with a retroreflective target - Emitter/receiver and polarized retroreflective models are ideal for detecting dark and shiny targets - Bright visible red LED for easy alignment of the sensor - Many connection types and output configurations are available by model number ## WARNING: - Do not use this device for personnel protection - Using this device for personnel protection could result in serious injury or death. - This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. ## Models **==> picture [482 x 202] intentionally omitted <==** **----- Start of picture text -----**<br> Sensing Mode Models Sensing Range Connection Output Type<br>Q2XAPLPF-2M 1 PNP Light Operate (LO)<br>2 m (6.5 ft) unterminated 3-<br>Q2XANLPF-2M wire PVC-jacketed cable 1 NPN LO<br>Polarized Retro-reflective, Maximum 3300 mm using<br>Visible red, 645 nm BRT-60X40C reflector 150 mm (6 in) PVC-jacketed<br>Q2XABLPF-Q cable with a 4-pin M8 male Bipolar LO<br>quick-disconnect connector<br>Q2XNAE-2M 2 m (6.5 ft) unterminated 2- N/A<br>wire PVC-jacketed cable<br>Opposed Emitter; Visible<br>red, 645 nm 150 mm (6 in) PVC-jacketed<br>Q2XNAE-Q cable with a 4-pin M8 male N/A<br>quick-disconnect connector<br>Q2XAPR-2M Maximum 3000 mm 2 m (6.5 ft) unterminated 3- 1 PNP LO<br>wire PVC-jacketed cable<br>Q2XANR-2M 2 m (6.5 ft) unterminated 3- 1 NPN LO<br>Opposed Receiver wire PVC-jacketed cable<br>150 mm (6 in) PVC-jacketed<br>Q2XABR-Q cable with a 4-pin M8 male Bipolar LO<br>quick-disconnect connector<br>**----- End of picture text -----**<br> - To order Dark Operate (DO) models, replace " AP ", " AN ", or " AB " with " RP ", " RN ", or " RB ", respectively. - To order PNP or NPN models with a 150 mm (6 in) PVC cable and a 3-pin M8 male quick disconnect, replace " -2M " with " -Q3 ". - To order Bipolar models with a 150 mm (6 in) PVC cable and a 4-pin M12 male quick disconnect, replace " -Q " with " -Q5 ". 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 3 of 15 Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor Features ## Overview The Q2X opposed and polarized retroreflective sensors offer excellent sensing performance in a compact plastic housing which are easily integrated into tight spaces. The brass inserts provide stable mounting points, and the bright indicators provide user feedback of the sensor status. **==> picture [59 x 31] intentionally omitted <==** **----- Start of picture text -----**<br> Sensor features<br>2 1<br>**----- End of picture text -----**<br> 1. Green: Power Indicator 2. Yellow: Light Sensed Indicator (Flashes for Marginal Conditions) page 4 of 15 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com 16-Sep-25 Q2XLP Polarized Retroreflective And Q2XER Opposed Mode Sensor ## Chapter Contents ## Mount the Device ................................................................................................................................................................................................. 5 Wiring ................................................................................................................................................................................................................... 5 Chapter 2 Installation ## Mount the Device 1. If a bracket is needed, mount the device onto the bracket. 2. Mount the device (or the device and the bracket) to the machine or equipment at the desired location. Do not tighten the mounting screws at this time. 3. Check the device alignment. 4. Tighten the mounting screws to secure the device (or the device and the bracket) in the aligned position. ## Wiring Cabled wiring diagrams are shown. Quick disconnect wiring diagrams are functionally identical. CAUTION: Observe proper ESD precautions (grounding) when connecting quick disconnect models. **==> picture [467 x 284] intentionally omitted <==** **----- Start of picture text -----**<br> Bipolar Models, Light Operate PNP Models, Light Operate NPN Models, Light Operate<br>bn (1) 10–30 V DC+ bn (1) + bu (3) –<br>bu (3) – 10–30 V DC 10–30 V DC<br>wh (2) bu (3) – bn (1) +<br>Load bk (4) Load bk (4) Load<br>bk (4) Load<br>fs [cS |e<br>Bipolar Models, Dark Operate PNP Models, Dark Operate NPN Models, Dark Operate<br>bn (1)bu (3)wh (2) 10–30 V DC+– bn (1)bu (3) 10–30 V DC+– bu (3)bn (1) 10–30 V DC–+<br>Load bk (4) Load bk (4) Load<br>bk (4) Load<br>fs te its<br>4-pin M8 Male Quick Disconnect 3-pin M8 Male Quick Disconnect 4-pin M12 Male Quick Disconnect<br>2 4 4 1<br>2<br>1 3 4<br>1 3<br>3<br>CS ©.<br>Emitter<br>Key bn (1)<br>1 = Brown +<br>2 = White 10–30 V DC<br>3 = Blue<br>4 = Black bu (3) –<br>TE<br>**----- End of picture text -----**<br> In light operate (LO) mode, the output is ON when the target returns the same or more light to the sensor and OFF when the sensor detects less light than the configured/taught target. In opposed and retroreflective sensing modes , light operate is active when the beam is unblocked. In diffuse, fixed field, and adjustable field sensor modes , light operate is active when the target is present. 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 5 of 15 Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor Installation In dark operate (DO) mode, the output is ON when the target returns less light to the sensor than the configured target and OFF when the sensor detects more light than the configured/taught target. In opposed and retroreflective sensing modes , dark operate is active when the beam is blocked. In diffuse, fixed field, and adjustable field sensor modes , dark operate is active when the target is absent. page 6 of 15 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com 16-Sep-25 Q2XLP Polarized Retroreflective And Q2XER Opposed Mode Sensor ## Chapter Contents FCC Part 15 Class B for Unintentional Radiators ................................................................................................................................................ 7 Industry Canada ICES-003(B).............................................................................................................................................................................. 8 Dimensions........................................................................................................................................................................................................... 8 Performance Curves ............................................................................................................................................................................................ 8 ## Chapter 3 ## Specifications Supply Voltage 10 V DC to 30 V DC (10% maximum ripple within specified limits) at less than 16 mA, exclusive of load Sensing Beam Visible red LED, 645 nm Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Bipolar (1 NPN and 1 PNP) solid-state output or single output (PNP or NPN), light operate (LO) or dark operate (DO), depending on model Rating: 50 mA total output current Off-state leakage current: < 10 µA at 30 V DC ON-state saturation voltage: < 2 V at 50 mA Protected against output short-circuit, continuous overload, and false pulse on power-up Output Response Polarized Retroreflective models: 600 µs, OFF to ON and ON to OFF Opposed Receiver models: 1 ms ON, 0.6 ms OFF Repeatability Polarized Retroreflective models: 144 μs Opposed Receiver models: 133 μs Indicators Polarized Retroreflective and Opposed Receiver: Two LED indicators on sensor top: Green solid: Power on Amber solid: Light sensed Amber flashing: Marginal sensing condition Opposed Emitter: Green solid: Power on Construction PC/ABS housing, acrylic lens cover; PVC cable, acetal adjustment potentiometer Environmental Rating IP67 Operating Conditions 95% at +50 °C maximum relative humidity (non-condensing) Temperature: –25 °C to +50 °C (–13 °F to +122 °F) Certifications Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 CE 1831 Diegem, BELGIUM Turck Banner LTD Blenheim House UK Blenheim Court Wickford, Essex SS11 8YT cA GREAT BRITAIN **Industrial Control Equipment 3TJJ** Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. **==> picture [208 x 68] intentionally omitted <==** **----- Start of picture text -----**<br> ||||| |---|---|---|---| |Supply|Supply| |Required Overcurrent|Required Overcurrent| |Wiring|Wiring| |Protection (A)|Protection (A)| |(AWG)|(AWG)| |20|5.0|26|1.0| |22|3.0|28|0.8| |24|2.0|30|0.5| **----- End of picture text -----**<br> ## Connections 2 m (6.5 ft) unterminated 2-wire PVC-jacketed cable, 2 m (6.5 ft) unterminated 3-wire PVC-jacketed cable,150 mm (6 in) PVC-jacketed cable with a 3-pin M8 male quick-disconnect connector, 150 mm (6 in) PVC-jacketed cable with a 4-pin M8 male quick-disconnect connector, or 150 mm (6 in) PVCjacketed cable with a 4-pin M12 male quick-disconnect connector, depending on model. ## FCC Part 15 Class B for Unintentional Radiators (Part 15.105(b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 7 of 15 Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor Specifications - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - • Consult the dealer or an experienced radio/TV technician for help. (Part 15.21) Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ## Industry Canada ICES-003(B) This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. ## Dimensions **==> picture [500 x 215] intentionally omitted <==** **----- Start of picture text -----**<br> Polarized retroreflective models Opposed mode models<br>8 8<br>[0.32] [0.32]<br>Hardware Included: Hardware Included:<br>(2) M3 x 0.5 x 16 mm SS screw (2) M3 x 0.5 x 16 mm SS screw<br>[0.55]14 (2) M3 x 0.5 SS nut(2) M3 flat SS washer [0.55]14 (2) M3 x 0.5 SS nut(2) M3 flat SS washer<br>(2) M3 internal tooth SS lockwasher (2) M3 internal tooth SS lockwasher<br>8.9<br>14 [0.35]<br>[0.55]<br>5.1<br>Receiver [0.20] 6.8 [0.59]15 [1.02]26 Emitter / Receiver [0.47]11.9 [0.59]15 [1.02]26<br>[0.27]<br>Emitter<br>[0.20]5.2 [0.20]5.2<br>2X Ø3.25 [0.128] 2X Ø3.25 [0.128]<br>[0.44]11.3 [0.44]11.3<br>**----- End of picture text -----**<br> All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. Maximum torque 0.9 Nm (8 in-lbf). ## Performance Curves **==> picture [500 x 186] intentionally omitted <==** **----- Start of picture text -----**<br> Polarized Retroreflective Models<br>Excess Gain Beam Pattern<br>100 200<br>BRT-60x40C<br>BRT-40x19A 150<br>BRT-THG-3x3<br>BRT-32x20AM 100<br>50<br>10 0<br>50<br>100<br>150<br>1 200<br>0 0.5 1.0 1.5 2.0 2.5 3.0 3.5<br>1 10 100 1000 10000<br>DISTANCE (mm) DISTANCE (m)<br>EXCESS GAIN<br>BEAM PATTERN (mm)<br>**----- End of picture text -----**<br> page 8 of 15 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com 16-Sep-25 Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor Specifications **==> picture [500 x 186] intentionally omitted <==** **----- Start of picture text -----**<br> Emitter/Receiver Models (Effective Beam size: 4.3 mm)<br>Excess Gain Beam Pattern<br>100000 400<br>300<br>10000<br>200<br>1000 100<br>0<br>100 100<br>200<br>10<br>300<br>1 400<br>10 100 1000 10000 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5<br>DISTANCE (mm) DISTANCE (m)<br>EXCESS GAIN<br>BEAM PATTERN (mm)<br>**----- End of picture text -----**<br> 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 9 of 15 Q2XLP Polarized Retroreflective And Q2XER Opposed Mode Sensor ## Chapter Contents **==> picture [500 x 66] intentionally omitted <==** **----- Start of picture text -----**<br> ||| |---|---| |Cordsets ............................................................................................................................................................................................................. 10| |Brackets ..............................................................................................................................................................................................................11| |Reflectors ........................................................................................................................................................................................................... 12| |Aperture Kits....................................................................................................................................................................................................... 13| |Chapter 4|Accessories| **----- End of picture text -----**<br> ## Cordsets **==> picture [473 x 462] intentionally omitted <==** **----- Start of picture text -----**<br> |||||||| |---|---|---|---|---|---|---| |3-pin Single-Ended M8 Female Cordsets| |Model|Length|Dimensions (mm)|Pinout (Female)| |BC-M8F3-24-0.5|0.5 m (1.64 ft)| |35 Typ.| |BC-M8F3-24-1|1 m (3.28 ft)| |ø 9.5| |BC-M8F3-24-2|2 m (6.56 ft)| |4| |1 = Brown| |BC-M8F3-24-5|5 m (16.4 ft)|ceo|M8 x 1|3|1|3 = Blue 4 = Black| |BC-M8F3-24-8|8 m (26.25 ft)|4.2 mm Dia| |es| |BC-M8F3-24-10|10 m (30.81 ft)|7 mm| |58 mm| |4-pin Single-Ended M8 Female Cordsets| |Model|Length|Dimensions (mm)|Pinout (Female)| |BC-M8F4-24-0.5|0.5 m (1.64 ft)| |35 Typ.| |BC-M8F4-24-1|1 m (3.28 ft)| |ø 9.5| |BC-M8F4-24-2|2 m (6.56 ft)| |4|2|1 = Brown| |BC-M8F4-24-5|5 m (16.4 ft)|M8 x 1|2 = White| |3|1|3 = Blue| |BC-M8F4-24-8|8 m (26.25 ft)|4.2 mm Dia|4 = Black| |ee| |BC-M8F4-24-10|10 m (30.81 ft)|7 mm| |58 mm| |4-pin Single-Ended M12 Female Cordsets| |Model|Length|Dimensions (mm)|Pinout (Female)| |BC-M12F4-22-1|1 m (3.28 ft)| |44 Typ.| |BC-M12F4-22-2|2 m (6.56 ft)| |BC-M12F4-22-5|5 m (16.4 ft)| |BC-M12F4-22-8|8 m (26.25 ft)|M12 x 1|2|1 = Brown| |=O|ø 14.5|1|2 = White| |BC-M12F4-22-10|10 m (30.81 ft)|3 = Blue| |Ø5.2 mm|3|4 = Black| |BC-M12F4-22-15|15 m (49.2 ft)|4|5|5 = Unused| |BC-M12F4-22-20|20 m (65.61 ft)| |ee|7 mm| |BC-M12F4-22-25|25 m (82.02 ft)|58 mm|:| |BC-M12F4-22-30|30 m (98.42 ft)| **----- End of picture text -----**<br> 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 10 of 15 Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor Accessories **==> picture [500 x 184] intentionally omitted <==** **----- Start of picture text -----**<br> 4-pin Single-Ended M12 Female Right-Angle Cordsets<br>Model Length Dimensions (mm) Pinout (Female)<br>BC-M12F4A-22-1 1 m (3.28 ft) 32 Typ.<br>[1.26"]<br>BC-M12F4A-22-2 2 m (6.56 ft)<br>BC-M12F4A-22-5 5 m (16.4 ft) 30 Typ.<br>BC-M12F4A-22-8 8 m (26.25 ft) [1.18"] 2 3<br>1 = Brown<br>BC-M12F4A-22-10 10 m (30.81 ft) 1 2 = White<br>M12 x 1 4 3 = Blue<br>ø 14.5 [0.57"] 4 = Black<br>5 = Unused<br>Ø5.2 mm<br>BC-M12F4A-22-15 15 m (49.2 ft)<br>7 mm<br>58 mm<br>**----- End of picture text -----**<br> ## Brackets All measurements are listed in millimeters, unless noted otherwise. The measurements provided are subject to change. **==> picture [500 x 167] intentionally omitted <==** **----- Start of picture text -----**<br> SMBQ2XA 2 x Ø3.3<br>• Vertical L-shaped bracket 2 x Ø3.3 36<br>• 20-ga stainless steel<br>17 11<br>SMBQ2XB 2 x Ø3.3 2 x Ø3.3<br>• Rear L-shaped bracket 11<br>• 20-ga stainless steel 24 18<br>**----- End of picture text -----**<br> ## SMBQ20FA - Includes 3/8-16 × 2 in socket head cap screw (SHCS) - • 304 stainless steel 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 11 of 15 Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor Accessories ## SMBQ20FAM10 - Kit for 10 mm (3/8 in) Rod Bracket Systems for Q2X, Q20, Q12, VS1, VS3, VS8 - • Includes M10-1.5 x 50 mm Socket Head Cap Screw (SHCS) ## SMBQ20FAM12 - Kit for 12 mm (1/2 in) Rod Bracket Systems for Q2X, Q20, Q12, VS1, VS3, VS8 - • No socket head cap screw (SHCS) included ## Reflectors ## BRT-2X2 - Square, acrylic target - Reflectivity factor: 1.0 - Max. temperature: +50 °C (+122 ºF) - Optional brackets are available - Approximate size: 51 mm × 51 mm **==> picture [45 x 51] intentionally omitted <==** ## BRT-84X84A - Square, acrylic target - • Reflectivity Factor: 2.0 - Temperature: - Approximate size: 84 mm × 84 mm **==> picture [47 x 52] intentionally omitted <==** ## BRT-40X19A - Rectangular, acrylic target - Reflectivity Factor: 1.3 - Temperature: - Approximate size: 19 mm × 60 mm overall; 19 mm × 40 mm reflector page 12 of 15 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com 16-Sep-25 Q2XLP Polarized Retroreflective and Q2XER Opposed Mode Sensor Accessories ## BRT-60X40C - Rectangular, acrylic target - • Reflectivity Factor: 1.4 - Temperature: - • Optional brackets are available - Approximate size: 40 mm × 60 mm **==> picture [38 x 69] intentionally omitted <==** ## BRT-60X40IP69K - Rectangular, acrylic target (color is amber) - • Reflectivity Factor: 0.7 • Temperature: –20 °C to +140 °C (–4 °F to +284 °F) • Chemically resistant - IP69K washdown rated - Optional brackets are available **==> picture [38 x 69] intentionally omitted <==** - Approximate size: 40 mm × 60 mm ## BRT-60X40AF - Rectangular, acrylic target - • Reflectivity Factor: 1.4 • Temperature: - Anti-fogging coating for use around steam - Optional brackets are available - Approximate size: 40 mm × 60 mm **==> picture [38 x 69] intentionally omitted <==** ## BRT-84 - Round, acrylic target - • Reflectivity Factor: 1.4 • Temperature: - Optional brackets are available - • Size: 84 mm diameter • Mounting Hole: 4.5 mm diameter **==> picture [46 x 68] intentionally omitted <==** ## Retroreflective Tape **==> picture [500 x 32] intentionally omitted <==** **----- Start of picture text -----**<br> Model Reflectivity Factor Maximum Temperature Size<br>BRT-THG-2-100 0.7 +60 °C (+140 °F) 50 mm (2 in) wide, 2.5 m (100 in) long<br>**----- End of picture text -----**<br> ## Aperture Kits **==> picture [500 x 77] intentionally omitted <==** **----- Start of picture text -----**<br> Model Description Pieces<br>APQ2X-1 Circular aperture, 1 mm (0.04 in) diameter 2<br>APQ2X-1.5 Circular aperture, 1.5 mm (0.06 in) diameter 2<br>APQ2X-2 Circular aperture, 2 mm (0.08 in) diameter 2<br>APQ2X-VH Cross-talk avoidance polarizing filter 4<br>**----- End of picture text -----**<br> 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 13 of 15 Q2XLP Polarized Retroreflective And Q2XER Opposed Mode Sensor ## Chapter Contents Clean with Mild Detergent and Warm Water ...................................................................................................................................................... 14 Repairs ............................................................................................................................................................................................................... 14 Contact Us.......................................................................................................................................................................................................... 14 Banner Engineering Corp Limited Warranty....................................................................................................................................................... 14 ## Chapter 5 Product Support and Maintenance ## Clean with Mild Detergent and Warm Water Handle the sensor with care during installation and operation. Sensor windows soiled by fingerprints, dust, water, oil, etc. create stray light that may degrade the peak performance of the sensor. Wipe down the device with a soft cloth dampened with a mild detergent and warm water solution. Do not use any other chemicals for cleaning. ## Repairs Contact Banner Engineering for troubleshooting of this device. Do not attempt any repairs to this Banner device; it contains no field-replaceable parts or components. If the device, device part, or device component is determined to be defective by a Banner Applications Engineer, they will advise you of Banner's RMA (Return Merchandise Authorization) procedure. IMPORTANT: If instructed to return the device, pack it with care. Damage that occurs in return shipping is not covered by warranty. ## Contact Us Banner Engineering Corp. | 9714 Tenth Avenue North | Plymouth, MN 55441, USA | Phone: + 1 888 373 6767 For worldwide locations and local representatives, visit www.bannerengineering.com. ## Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. 16-Sep-25 © Banner Engineering Corp. All rights reserved. www.bannerengineering.com page 14 of 15 ## LinkedIn X Facebook Instagram © 2025. All rights reserved. www.bannerengineering.com
Updated at June 9, 2026
Founded in 1966, Banner Engineering is a globally recognized leader in the design and manufacture of industrial automation products. The company is renowned for developing innovative, high-quality solutions that improve operational efficiency, safeguard personnel, and optimize manufacturing processes across a diverse range of industries. Our extensive selection of Banner Engineering components prominently features their industry-leading sensing technologies. We offer a comprehensive array of precision light sensors engineered for accurate detection and measurement in demanding environments. Complementing this core sensing portfolio is a robust offering of automation signaling devices, including visual signal indicator units and essential accessories, which provide clear and immediate communication of machine status. Beyond primary sensing and indication solutions, our range encompasses critical components for broader process control and machine safety. This includes advanced process controllers, reliable pressure sensors and transducers, and dependable safety relays. Supported by a variety of purpose-built sensor accessories and fiber optic lead assemblies, Banner Engineering delivers the durable, high-performance technologies required to build and maintain sophisticated automated systems.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →