APPM00485023142XY0

## **EMI Common Mode Choke** 

## **Automotive Grade** 

## **APPM Series** 

## **Overview** 

An EMI common mode choke (CMC) for power lines is a passive component specifically designed to suppress electromagnetic interference (EMI) in power supply circuits A full series of common mode choke is designed for excellent noise attenuation with compact sizing for use in wide range of applications. Both standard series and custom designs are available. 

## **Benefits** 

1. Automotive DC Power Line Common Mode Filter 

2. Ferrite NiZn core offers high Z@High frequency 

3. Ferrite Ni-Zn+MnZn core offers High Z @ Low frequency 

4. Operating temperature range `－` 40℃ `～` 125℃ 

5. Excellent solderability 

## **Applications** 

1. Networking 

2. EMI solutions for charger 

3. Media player, Dashboard 

4. Battery management 

5. Lighting, MCU, Infotainment 

## **Product Information** 

**Series Size Code (JIS/EIA) Impedance(Ω)** APPM 5050/2020 70 ~ 4300 7060/2824 9070/3628 1211/4844 1513/6052 4850/1920 

**APPM00485023  Series S ecification p** 

AEC-Q200 

~~_|~~ **1 Scope:** This specification applies to the Pb Free Common mode filters 

## ~~|~~ **2 Part Numbering:** 

**==> picture [64 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
_| 3 Rating:<br>**----- End of picture text -----**<br>


Operating Temperature:  －40℃～＋125℃ (Including self temp. rise) Storage Temperature:     －40℃～＋125℃(For after the circuit board is mounted) Storage Temperature:      (on tape & reel): -20°C to +40°C; 75% RH max 

## ~~_|~~ **4 Standard Testing Condition** 

Unless otherwise specified In case of doubt Temperature Ordinary Temperature(15 to 35 ℃ ) 20 to 30 `℃` Humidity Ordinary Humidity(25 to 85% RH) 50 to 80 %RH 

**==> picture [289 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
5 [Configuration and Dimensions and Unit Weight:]<br>=<br>**----- End of picture text -----**<br>


**Page-1/9** 

**==> picture [246 x 192] intentionally omitted <==**

**----- Start of picture text -----**<br>
A:  4.8±0.30   mm<br>B:  5.0±0.30    mm<br>C:  2.3±0.20    mm<br>D: 3.5±0.20    mm<br>E: 2.2±0.20    mm<br>Ex Marking:102 F: 1.1±0.20    mm<br>Net Weight (grms)<br>SIZE CODE Net Weight (grms)<br>485023 0.216(typ.)<br>——<br>P-0505-9002-00-(00)<br>**----- End of picture text -----**<br>


~~SSS~~ **APPM00485023  Series Specification** AEC-Q200 

## **6 Electrical Characteristics:** 

||**Impedance(Ω)**|**Impedance(Ω)**||||**Withstanding**|**Insulation**||
|---|---|---|---|---|---|---|---|---|
|**Part No.**|**Typ.**|**Typ.**|**RDC(mΩ)**|**Irms**|**Rated Voltage**|**voltage**|**Resistance**|**Marking**|
||**@10MHz**|**@100MHz**|**±40%**|**(A)Max.**|**(V)Max.**|**(V)Max.**|**(MΩ)Min.**||
|APPM00485023101XY0||100|10|6|50|125|10|101|
||_||||||||
|APPM00485023251XY0|20|250|14|5|50|125|10|251|
|APPM00485023501XY0|30|500|19|4|50|125|10|501|
|APPM00485023102XY0|60|1000|24|3|50|125|10|102|
|APPM00485023142XY0|100|1400|40|2|50|125|10|142|
|APPM00485023152XY0|100|1500|40|2|50|125|10|152|



## **NOTE:** 

1.Irms `：` Based on temperature rise (△T `：` 40℃ Typ.) 

Page-2/9 

P-0505-9002-00-(00) 

**APPM00485023  Series S ecification p** 

AEC-Q200 

**==> picture [123 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
7 7.1 Construction:<br>_|<br>**----- End of picture text -----**<br>


## **7.2 Material List:** 

**Page-3/9** 

**P-0505-9002-00-(00)** 

**APPM00485023  Series S ecification** AEC-Q200 aes **p** 

## **TEST EQUIPMENT** 

**1. Impedance** 

**Measured by HP 4291B RF Impedance Analyzer.** 

## **2.  DC Resistance** 

**Measured by Chroma 16502 mill ohm meter** 

**3. Insulation Resistance** 

**Measured by Chroma 19073** 

**Measurement voltage: 50v, Measurement time: 3.0 sec.** 

**Page-4/9** 

**P-0505-9002-00-(00)** 

## **APPM00485023  Series Specification** 

|**TEST ITEM**|**SPECIFICATIONS**|**TEST CONDITIONS**|
|---|---|---|
|**Solderability**|**No more than 5% of the solderable**<br>**metalization exposed underlying, non-**<br>**wettable base metal or metallization layers**<br>**or portions of the ceramic substrate after**<br>**expoisure to molten solder.**|**Refer to J-STD-002**<br>**For both Leaded & SMD. Electrical Test not required.**<br>**Test Method B @ 245±5°C, dwell for 5+0/-0.5 seconds**|
|**Resistance to**<br>**Soldering**<br>**heat (reflow**<br>**soldering)**|**There shall be no damage or problems.**|**Temperature profile of reflow soldering**<br>**Note:**<br>**1. Re-Flow Possible times:within 2 times**<br>**2. Nitrogen adopted is recommended while in re-flow**<br>Temperature<br>Ramp up:<br>Ramp down:<br>3°C/sec. max.<br>6°C/sec. max.<br>_US<br>160°C<br>Soldering<br>260°C +3°C<br>10 - 30sec.<br>‘0,ar<br>\€ Preheat<br>€ Liquidus<br>Tine<br>150-200°C<br>>217°C<br>60-120 sec.<br>60-150 sec.|
|**Terminal**<br>**strength**|**The terminal electrode and the ferrite must**<br>**not damaged.**|**With the component mounted on a PCB obtained from the**<br>**Supplier with the device to be tested, apply a 17.7 N (1.8 Kg)**<br>**force to the side of a device being tested. This force shall be**<br>**applied for 60 +1 seconds. Also the force shall be applied**<br>**gradually as not to apply a shock to the component being tested.**|
|**Strength on**<br>**PC board**<br>**bending**|**The terminal electrode and the ferrite must **<br>**not damaged.**|**Test device shall be soldered on the substrate**<br>**Substrate Dimension: 100x40x1.6mm**<br>**Deflection: 2.0mm**<br>**Keeping Time: 60 sec**<br>1...<br>2<br>a<br>:<br>_=._<br>As<br>16<br>> ee<br>os|<br>eee<br>iy4|
|**High**<br>**Temperature**<br>**Exposure**<br>**(Storage)**|**Impedance:Within±20% of the initial value.**<br>**Insulation resistance and DC resistance on**<br>**the specification**<br>**shall be met.**<br>**The terminal electrode and the ferrite must**<br>**not damaged.**|**1000hrs. at rated operating temperature, part can be stored for**<br>**1000 hrs. @ 155°C. Unpowered. Measurement at 24±4 hours after**<br>**test conclusion.**|



Page5/9 

P-0505-9002-00-(00) 

## **APPM00485023  Series Specification** 

AEC-Q200 

## ENVIRONMENT CHARACTERISTICS 

**==> picture [497 x 534] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|TEST ITEM|SPECIFICATIONS|TEST CONDITIONS|
|Humidity Bias|Impedance:Within±20% of the initial value.|
|Insulation resistance and DC resistance on|
|Precondition: Reflow peak temperature 260°C 3 times.|
|the specification shall be met.|(Reference: J-STD-020)|
|The terminal electrode and the ferrite must|1000 hours 85°C/85%RH.  Unpowered. Measurement at 24±4|
|hours after test conclusion.|
|not damaged.|
|Vibration|Impedance:Within±20% of the initial value.|
|Insulation resistance and DC resistance on|
|MIL-STD-202 Method 204|
|the specification,shall be met.|
|5 g's for 20 minutes, 12 cycles each of 3 orientations.|
|The terminal electrode and the ferrite must|Test from 10-2000Hz.|
|not damaged.|
|Temperature Cycling|Impedance:Within±20% of the initial value.|
|Insulation resistance and DC resistance on|Precondition: Reflow peak temperature 260°C 3 times.|
|(Reference: J-STD-020)|
|the specification,shall be met.|
|1000 cycles (-55°C to +155°C). Measurement at 24±4 hours|
|The terminal electrode and the ferrite must|after test conclusion. 30min maximum dwell time at each|
|not damaged.|temperature extreme. 1 min. maximum transition time.|
|Impedance:Within±20% of the initial value.|
|Insulation resistance and DC resistance on|
|Precondition: Reflow peak temperature 260°C 3 times.|
|High Temperature|the specification,shall be met.|(Reference: J-STD-020)|
|Operating Life|The terminal electrode and the ferrite must|1000 hrs. @ 125 °C, apply maximum rated power.|
|Measurement 24±4 hours after test conclusion.|
|not damaged.|
|Any applicable method using x10 magnification,|
|Verify physical dimensions to the applicable|micrometers, calipers, gauges, contour projectors, or other|
|Physical Dimensions|
|component detail specification.|measuring equipment, capable of determining the actual|
|specimen dimensions.|
|Units are non-operating.|
|1. Electrical characterization-|Pulse shape : Half-sine waveform|
|Mechanical Shock|Impedance:Within±20%  change range|Impact acceleration : 100 g's|
|2. Appearance-No damage (OM)|Pulse duration : 6 ms|
|Number of shocks : 18  shocks ( 3 shocks for  each face)|
|Refer to UL 94|
|The marking and A side have no obvious|Burning stops within 10 seconds on a vertical specimen;|
|Flammability|
|broken, and the marking are clearly|drips|
|of particles allowed as long as they are not inflamed.|

**----- End of picture text -----**<br>


Page-6/9 

P-0505-9002-00-(00) 

**APPM00485023  Series S ecification p** 

AEC-Q200 

**==> picture [193 x 48] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 Packaging:<br>__|<br>8.1 Packaging -Cover Tape<br>**----- End of picture text -----**<br>


## **8.2 Packaging Quantity** 

|TYPE|PCS/REEL<br>2500|
|---|---|
|485023||



## **8.3 Reel Dimensions** 

**==> picture [47 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Unit : mm<br>**----- End of picture text -----**<br>


Page-7/9 

P-0505-9002-00-(00) 

**APPM00485023  Series S ecification p** 

AEC-Q200 

**==> picture [197 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 Packaging:<br>_|<br>8.4 Tape Dimensions in mm<br>**----- End of picture text -----**<br>


**==> picture [409 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
Unreeling<br>Direction<br>Trailer A s required Leader Leader<br>OOO Oe & Ble 0 Ooo<br>Marking non-directional printing<br>**----- End of picture text -----**<br>


## **9 Recommended Land Pattern:** ~~_l~~ 

**(STANDARD PATTERN)     Unit : mm** 

Page-8/9 

P-0505-9002-00-(00) 

## **APPM00485023  Series S ecification** AEC-Q200 ~~ee~~ **p** 

## **10 Note:** 

1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 

2. Do not knock or drop. 

3. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose,under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from  such agreement. 

4. Please keep the distance between transformer/coil and other components 

- (refer to the standard IEC 950) 

5. The moisture sensitivity level (MSL) of products is classified as level 1. 

6. Suggestion 

On customer side this product series need to be fixed by the glue after IR reflow. 

- Please refer to below example photo: 

Page-9/9 

P-0505-9002-00-(00) 

AEC-Q200 

## **APPM00485023  Series Specification** 

## **Graph:** 

**==> picture [108 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
APPM00485023101XY0<br>**----- End of picture text -----**<br>


**==> picture [107 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
APPM00485023501XY0<br>**----- End of picture text -----**<br>


## **APPM00485023142XY0** 

**==> picture [107 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
APPM00485023251XY0<br>**----- End of picture text -----**<br>


**APPM00485023102XY0** 

**APPM00485023152XY0** 

ATTACHMENT-1