APPM00070638701XY0

## **APPM00070638   Series Specification** AEC-Q200 000i aaa 

~~7~~ **1 Scope:** This specification applies to the Pb Free DC Power Line Common Mode Filter 

## **2 Part Numbering:** ~~7~~ 

## **A PPM □□ □□□□□□□□□□ □□** 

**Internal Code Tolerance Inductance Dimensions Control Code Product Series Grade** 

## **3 Rating:** ~~=~~ 

Operating Temperature range:-40°C ~ +125°C (Including self temp. rise) 

Storage Temperature range: -40°C ~ +125°C (For after the circuit board is mounted) Storage Temperature: (on tape & reel): -20°C to +40°C; 75% RH max. 

## **4 Standard Testing Condition:** ~~=~~ 

|**Standard Testing Condition:**<br>~~=~~|**Standard Testing Condition:**||
|---|---|---|
|Unless otherwise specified|Unless otherwise specified|In case of doubt|
|Temperature<br>Ordinar|OrdinaryTemperature(15 to 35℃)|20 to 30℃|
|Humidity<br>Ordinary Humidity(25 to 85% RH)|Ordinary Humidity(25 to 85% RH)|50 to 80 %RH|



## **5 Configuration and Dimensions and Unit Weight:** ~~=~~ 

**==> picture [481 x 201] intentionally omitted <==**

**----- Start of picture text -----**<br>
Configuration and Dimensions and Unit Weight: A:   7.0±0.5           mm<br>A1: 7.5±0.5           mm<br>B:   6.0±0.5           mm<br>C:   3.8Max.          mm<br>4 1<br>1 4 D:   3.5Typ.         mm<br>E:   1.5±0.2           mm<br>701<br>F:   1.5±0.2           mm<br>2 3<br>3 2 G:    1.75±0.2        mm<br>Net Weight (grms)<br>Net Weight<br>Marking ： XXX SIZE CODE<br>(grms)<br>Marking color ： Black 070638 0.5(Typ.)<br>**----- End of picture text -----**<br>


## ~~eee~~ **APPM00070638   Series Specification** AEC-Q200 

## **6 Electrical Characteristics:** ~~_|~~ 

|**PT/NO.**<br>~~a~~|**Impedance(Ω)**<br>**at 100MHz**|**Impedance(Ω)**<br>**at 100MHz**|**Resistance**<br>**RDC(Ω) Max.(1**<br>**line)**<br>~~OG~~|**Rated**<br>**Current**<br>**(A) Max.**<br>~~CO~~|**Insulation**<br>**Resistance**<br>**(MΩ) Min.**|**Rated**<br>**Voltage**<br>**(V)Max.**|
|---|---|---|---|---|---|---|
||**Min.**<br>~~OG~~|**Typ.**<br>~~OG~~|||||
|**APPM00070638400XY0**<br>~~a~~|**40**<br>~~OG~~|**70**<br>~~OG~~|**5m**<br>~~OG~~|**15**<br>~~CO~~|**10**|**125**|
|**APPM00070638101XY0**<br>~~a~~<br>~~a CO~~<br>~~a~~|**100**<br>~~OG~~<br>~~CO~~<br>|**140**<br>~~OG~~<br>~~CO~~<br>|**10m**<br>~~OG~~<br>~~CO~~<br>~~OO~~<br>|**9.0**<br>~~CO~~<br>~~CO~~<br>~~OO~~<br>|**10**<br>~~CO~~<br>|**125**<br>~~CO~~<br>|
|**APPM00070638301XY0**<br>~~nO~~<br>~~a~~|**225**<br>~~nO~~<br>|**300**<br>~~nO~~<br>|**10m**<br>~~nO~~<br>~~OO~~<br>|**5.0**<br>~~nO~~<br>~~OO~~<br>|**10**<br>~~nO~~<br>|**125**<br>~~nO~~<br>|
|**APPM00070638501XY0**<br>~~a CO~~<br>~~a~~|**275**<br>~~CO~~<br>|**350**<br>~~CO~~<br>|**10m**<br>~~OO~~<br>~~CO~~<br>~~OO~~<br>|**5.0**<br>~~OO~~<br>~~CO~~<br>~~OO~~<br>|**10**<br>~~CO~~<br>|**125**<br>~~CO~~<br>|
|**APPM00070638701XY0**<br>~~nO~~<br>~~a~~|**500**<br>~~nO~~<br>|**700**<br>~~nO~~<br>|**15m**<br>~~nO~~<br>~~OO~~<br>|**4.0**<br>~~nO~~<br>~~OO~~<br>|**10**<br>~~nO~~<br>|**125**<br>~~nO~~<br>|
|**APPM00070638102XY0**<br>~~a CO~~|**800**<br>~~CO~~|**1020**<br>~~CO~~|**17m**<br>~~OO~~<br>~~CO~~<br>~~OO~~|**3.0**<br>~~OO~~<br>~~CO~~<br>~~OO~~|**10**<br>~~CO~~|**125**<br>~~CO~~|
|**APPM00070638132XY0**<br>~~LO~~<br>~~a~~|**910**<br>~~LO~~<br>|**1300**<br>~~LO~~<br>|**21m**<br>~~LO~~<br>~~OO~~<br>~~OO~~<br>|**2.5**<br>~~LO~~<br>~~OO~~<br>~~OO~~<br>|**10**<br>~~LO~~<br>|**125**<br>~~LO~~<br>|
|**APPM00070638272XY0**<br>~~LO~~<br>~~a~~|**2000**<br>~~LO~~<br>|**2700**<br>~~LO~~<br>|**63m**<br>~~OO~~<br>~~LO~~<br>~~OO~~<br>|**1.0**<br>~~OO~~<br>~~LO~~<br>~~OO~~<br>|**10**<br>~~LO~~<br>|**125**<br>~~LO~~<br>|
|**APPM00070638302XY0**<br>~~a CC~~|**2500**<br>~~CC~~|**3000**<br>~~CC~~|**75m**<br>~~OO~~<br>~~CC~~|**0.9**<br>~~OO~~<br>~~CC~~|**10**<br>~~CC~~|**125**<br>~~CC~~|



## **CIRCUIT DIAGRAM** 

## **NOTE:** 

1.Rated DC Current `：` Based on temperature rise   (△T `：` 40℃ Typ.) 

2.Hi-Pot(Pri-Sec) ： 800V DC/ 1mA/ 3 seconds 

## ~~SE~~ **APPM00070638   Series Specification** AEC-Q200 

**==> picture [268 x 501] intentionally omitted <==**

**----- Start of picture text -----**<br>
6 Electrical Characteristics:<br>_|<br>(6)-1 Impedance<br>      Measured by HP4291B RF Impedance Analyzer.<br>Measurement terminal<br>(6)-2 DC Resistance<br>      Measured by Chroma 16502 milliohm meter.<br>Measurement terminal<br>(6)-3 Insulation Resistance<br>     Measured by Chroma 19073<br>     Measurement voltage : 125V ,Measurement time : 3 sec.<br>Measurement terminal<br>**----- End of picture text -----**<br>


~~Eee~~ **APPM00070638   Series Specification** AEC-Q200 

**==> picture [112 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
6 6.1 Construction:<br>_|<br>**----- End of picture text -----**<br>


## **6.2 Material List:** 

|**NO.**|**ITEM**|**DESCRIPTION & TYPE**|
|---|---|---|
|**1**|**CORE**|**FERRITE**|
|**2**|**Wire**|**Magnet Wire**|
|**3**|**Cover**|**LCP**|
|**4**|**Marking**|**INK**|



**APPM00070638   Series Specification** 

AEC-Q200 

## Mechanical 

|**TEST ITEM**|**SPECIFICATIONS**|**TEST CONDITIONS**|
|---|---|---|
|**Solderability**|**No more than 5% of the solderable**<br>**metalization exposed underlying, non-**<br>**wettable base metal or metallization layers or**<br>**portions of the ceramic substrate after**<br>**expoisure to molten solder.**|**Refer to J-STD-002**<br>**For both Leaded & SMD. Electrical Test not required.**<br>**Test Method B @ 245±5°C, dwell for 5+0/-0.5 seconds**|
|**Resistance to**<br>**Soldering**<br>**heat (reflow**<br>**soldering)**|**There shall be no damage or problems.**|**Temperature profile of reflow soldering**<br>**Note:**<br>**1. Re-Flow Possible times:within 3 times**<br>**2. Nitrogen adopted is recommended while in re-flow**<br>Temperature<br>Ramp up:<br>Ramp down:<br>3°C/sec. max.<br>6°C/sec. max.<br>-US<br>160°C<br>Soldering<br>260°C +3 °C<br>10 - 30sec.<br>oO;<br>25°C<br>€Preheat<br>€ Liquidus<br>Time<br>150-200°C<br>>217°C<br>60-120 sec.<br>60-150 sec.|
|**Terminal**<br>**strength**|**The terminal electrode and the ferrite must**<br>**not damaged.**|**With the component mounted on a PCB obtained from the Supplier**<br>**with the device to be tested, apply a 17.7 N (1.8 Kg) force to the side**<br>**of a device being tested. This force shall be applied for 60 +1**<br>**seconds. Also the force shall be applied gradually as not to apply a**<br>**shock to the component being tested.**|
|**Strength on**<br>**PC board**<br>**bending**|**The terminal electrode and the ferrite must**<br>**not damaged.**|**Test device shall be soldered on the substrate**<br>**Substrate Dimension: 100x40x1.6mm**<br>**Deflection: 2.0mm**<br>**Keeping Time: 60 sec**<br>45<br>45<br>1.6<br>2<br>20<br>~~See~~<br>/\<br>LJ<br>ag|
|**High**<br>**Temperature**<br>**Exposure**<br>**(Storage)**|**Impedance:Within±20% of the initial value.**<br>**Insulation resistance and DC resistance on**<br>**the specification**<br>**shall be met.**<br>**The terminal electrode and the ferrite must**<br>**not damaged.**|**1000hrs. at rated operating temperature, part can be stored for 1000**<br>**hrs. @ 150°C. Unpowered. Measurement at 24±4 hours after test**<br>**conclusion.**|



AEC-Q200 

## **APPM00070638   Series Specification** 

## Environment Characteristics 

|**TEST ITEM**|**SPECIFICATIONS**|**TEST CONDITIONS**|
|---|---|---|
|**Humidity Bias**|**Impedance:Within±20% of the initial value.**<br>**Insulation resistance and DC resistance on**<br>**the specification shall be met.**<br>**The terminal electrode and the ferrite must**<br>**not damaged.**|**Precondition: Reflow peak temperature 260°C 3 times.**<br>**(Reference: J-STD-020)**<br>**1000 hours 85°C/85%RH.  Unpowered. Measurement at  24±4**<br>**hours after test conclusion.**|
|**Vibration**|**Impedance:Within±20% of the initial value.**<br>**Insulation resistance and DC resistance on**<br>**the specification,shall be met.**<br>**The terminal electrode and the ferrite must**<br>**not damaged.**|**MIL-STD-202 Method 204**<br>**5 g's for 20 minutes, 12 cycles each of 3 orientations.**<br>**Test from 10-2000Hz.**|
|**Temperature Cycling**|**Impedance:Within±20% of the initial value.**<br>**Insulation resistance and DC resistance on**<br>**the specification,shall be met.**<br>**The terminal electrode and the ferrite must**<br>**not damaged.**|**Precondition: Reflow peak temperature 260°C 3 times.**<br>**(Reference: J-STD-020)**<br>**1000 cycles (-55°C to +150°C). Measurement at 24±4 hours after**<br>**test conclusion. 30min maximum dwell time at each**<br>**temperature extreme. 1 min. maximum transition time.**|
|**High Temperature**<br>**Operating Life**|**Impedance:Within±20% of the initial value.**<br>**Insulation resistance and DC resistance on**<br>**the specification,shall be met.**<br>**The terminal electrode and the ferrite must**<br>**not damaged.**|**Precondition: Reflow peak temperature 260°C 3 times.**<br>**(Reference: J-STD-020)**<br>**1000 hrs. @ 125 °C, apply maximum rated power. Measurement**<br>**24±4 hours after test conclusion.**|
|**Physical Dimensions**|**Verify physical dimensions to the applicable**<br>**component detail specification.**|**Any applicable method using x10 magnification, micrometers,**<br>**calipers, gauges, contour projectors, or other measuring**<br>**equipment, capable of determining the actual specimen**<br>**dimensions.**|
|**Mechanical Shock**|**1. Electrical characterization-**<br>**Impedance:Within±20%  change range**<br>**2. Appearance-No damage (OM)**|**Units are non-operating.**<br>**Pulse shape : Half-sine waveform**<br>**Impact acceleration : 100 g's**<br>**Pulse duration : 6 ms**<br>**Number of shocks : 18  shocks ( 3 shocks for  each face)**|
|**Flammability**|**The marking and A side have no obvious**<br>**broken, and the marking are clearly**|**Refer to UL 94**<br>**Burning stops within 10 seconds on a vertical specimen; drips**<br>**of particles allowed as long as they are not inflamed.**|



## ~~ee~~ **APPM00070638   Series Specification** AEC-Q200 

**==> picture [306 x 204] intentionally omitted <==**

**----- Start of picture text -----**<br>
7 Packaging:<br>_|<br>7.1 Packaging -Cover Tape<br>165° to 180°<br>Top cover tape<br>Base tape<br>**----- End of picture text -----**<br>


## **7.2 Packaging Quantity** 

|TYPE|PCS/REEL|
|---|---|
|APPM00070638|1500|



## **7.3 Reel Dimensions** 

**==> picture [179 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
Unit : mm<br>2±0.5<br>13±0.2<br>330<br>20±0.5<br>**----- End of picture text -----**<br>


AEC-Q200 

## **APPM00070638   Series Specification** 

## 7 **Packaging:** 

**7.4 Tape Dimensions in mm** 

**Unreeling Direction** 

## **8 Recommended Land Pattern:** 

**(STANDARD PATTERN)     Unit : mm** 

AEC-Q200 

## **APPM00070638   Series Specification** 

## **9 Note:** 

1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 

2. Do not knock or drop. 

3. All the items and parameters in this product specification have been prescribed on the premise that 

- our product is used for the purpose,under the condition and in the environment agreed upon between 

- you and us. You are requested not to use our product deviating from  such agreement. 

4. Please keep the distance between transformer/coil and other components 

- (refer to the standard IEC 950) 

5. The moisture sensitivity level (MSL) of products is classified as level 1. 

6. Suggestion 

On customer side this product series need to be fixed by the glue after IR reflow. 

Please refer to below example photo: 

**==> picture [29 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Glue<br>**----- End of picture text -----**<br>


**APPM00070638   Series Specification** 

AEC-Q200 

Typical Electrical Characteristics 

## Frequency vs impedance 

**==> picture [495 x 472] intentionally omitted <==**

**----- Start of picture text -----**<br>
APPM00070638400XY0 APPM00070638101XY0<br>1000 1000<br>100 100<br>10 10<br>Common Mode Commom Mode<br>Differential Mode Differential Mode<br>1 1<br>1 10 100 1000 1 10 100 1000<br>Frequency(MHz) Frequency(MHz)<br>APPM00070638301XY0 APPM00070638501XY0<br>10000<br>1000<br>1000<br>100<br>100<br>10<br>10<br>Common Mode Common Mode<br>Differential Mode Differential Mode<br>1 1<br>1 10 100 1000 1 10 100 1000<br>Frequency(MHz) Frequency(MHz)<br>Impedance(Ω) Impedance(Ω)<br>Impedance(Ω) Impedance(Ω)<br>**----- End of picture text -----**<br>


AEC-Q200 

## **APPM00070638   Series Specification** 

Typical Electrical Characteristics 

## Frequency vs impedance 

**==> picture [505 x 462] intentionally omitted <==**

**----- Start of picture text -----**<br>
APPM00070638701XY0 APPM00070638102XY0<br>10000 10000<br>1000 1000<br>100 100<br>10 10<br>Common Mode<br>Common Mode<br>Differential Mode<br>Differential Mode<br>1 1<br>1 10 100 1000 1 10 100 1000<br>Frequency(MHz) Frequency(MHz)<br>APPM00070638132XY0 APPM00070638272XY0<br>10000<br>10000<br>1000 1000<br>100 100<br>10 Common Mode 10<br>Common Mode<br>Differential Mode Differential Mode<br>1 1<br>1 10 100 1000 1 10 100 1000<br>Frequency(MHz)<br>Impedance(Ω)<br>Impedance(Ω) Impedance(Ω)<br>Impedance(Ω)<br>**----- End of picture text -----**<br>


**==> picture [238 x 206] intentionally omitted <==**

**----- Start of picture text -----**<br>
APPM00070638272XY0<br>10000<br>1000<br>100<br>10<br>Common Mode<br>Differential Mode<br>1<br>1 10 100 1000<br>Frequency(MHz)<br>Impedance(Ω)<br>**----- End of picture text -----**<br>


AEC-Q200 

## **APPM00070638   Series Specification** 

## Typical Electrical Characteristics 

## Frequency vs impedance 

**==> picture [239 x 207] intentionally omitted <==**

**----- Start of picture text -----**<br>
APPM00070638302XY0<br>10000<br>1000<br>100<br>Say ait xX<br>10<br>Common Mode<br>Differential Mode<br>-— |<br>1<br>1 10 100 1000<br>Frequency(MHz)<br>Impedance(Ω)<br>**----- End of picture text -----**<br>