AGGP.35F.07.0060A

## **SPECIFICATION** 

- Part No. : **AGGP.35F.07.0060A** 

Product Name : 35mm Two Stage 28dB GPS-GLONASS-GALILEO GNSS Active Patch 

Antenna Module with Front-end Saw Filter 

- Features : Industry leading GPS/GLONASS/GALILEO antenna performance 35*35*6.9mm (Ground Plane) 60mm Ø1.13 IPEX MHFI (U.FL) 28dB LNA Wide Input Voltage 1.8V to 5.5V Low Power Consumption 

RoHS Compliant 

Page 1 of 10 

SPE-12-8-018/E/SS 

## **1. Introduction** 

The AGGP.35F GPS/GLONASS/GALILEO GNSS active patch antenna (along with the AGGP.25 model) is the best choice to use as an embedded antenna with the latest generation of GPS/GLONASS/GALILEO GNSS receivers. It utliizes a 35*35*3.5mm advanced wide-band ceramic patch antenna with optimized gain, radiation patttern and axial ratio at GPS, GALILEO and GLONASS centre frequencies. 

The AGGP.35F aslo includes a two stage LNA and a front-end SAW filter to reduce out of band noise such as from nearby cellular transceiver, and improve probability of the wireless device passing radiated spurious emissions certification. Produced in TS16949 automotive quality approved facility and 100% tested for gain (S21), return loss (S11) to ensure total consistency of performance. 

Cable type, length and connectors can be customized and samples offered according to requirement, subject to minimum order quantities in production. Taoglas also offers custom tuning service based on minimum order quantities, contact your local regional sales office for details. 

The AGGP.35F consists of 2 functional blocks – the LNA and also the patch antenna. 

SPE-12-8-018/E/SS Page 2 of 10 

## **2. Specification** 

|ELECTRICAL<br>~~a~~|ELECTRICAL<br>~~a~~|ELECTRICAL<br>~~a~~|ELECTRICAL<br>~~a~~|
|---|---|---|---|
|Operation Frequency|1574 ~ 1610MHz|||
|Patch Gain|1575.42MHz, 1dBic typ. @ zenith<br>1602MHz, 0.5dBic typ. @ zenith|||
|Overall Gain|1575.42MHz, 27 ± 3dBic typ. @ zenith<br>1602MHz, 28.5 ± 3dBic typ. @ zenith|||
|Axial Ratio|3.0dB max @ zenith.|||
|Polarization|Right Hand Circular|||
|VSWR|2.0 :1 max|||
|Impedance|50Ω|||
|DC input|1.8V min.|3.0V|5.5V max.|
|LNA Gain|22dB|28dB|31dB|
|Noise Figure|2.6dB|2.6dB|2.9dB|
|Power Consumption|5mA|10mA|23mA|
|Band Attenuation|15dB @ 1592 ± 140MHz|||
|MECHANICAL<br>~~LL~~||||
|Antenna Dimensions|35 x 35 x 3.7mm|||
|Material|Ceramic|||
|Cable|60mm 1.13 co-axial|||
|Connector|IPEX MHF1|||
|ENVIRONMENTAL<br>~~LL~~||||
|Operation Temperature|-40°C to 85°C|||
|Storage Temperature|-40°C to 105°C|||
|Relative Humidity|40% to 95%|||



SPE-12-8-018/E/SS Page 3 of 10 

## **3. LNA Gain and Out Band Rejection @3.0V** 

Page 4 of 10 

SPE-12-8-018/E/SS 

## **4. LNA Noise Figure @3.0V** 

## **5. Total Specification (through Antenna, LNA,** 

## **Cable and Connector)** 

Page 5 of 10 

SPE-12-8-018/E/SS 

## **6. Radiation Patterns** 

Page 6 of 10 

SPE-12-8-018/E/SS 

## **6.1. 1575.42MHz** 

## 6.1.1. XZ & YZ Plane 

## 6.1.2. XY Plane 

## **6.2. 1602MHz** 

## 6.2.1. XZ & YZ Plane 

## 6.2.2. XY Plane 

Page 7 of 10 

SPE-12-8-018/E/SS 

## **7. Plugs Usage Precautions** 

## **7.1. Mating / Unmating** 

(1) To disconnect connectors, insert the end portion of I-PEX under the connector flanges and pull off vertically, in the direction of the connector mating axis. 

(2) To mate the connectors, the mating axes of both connectors must be aligned and the connectors can be mated. The "click" will confirm fully mated connection. Do not attempt to insert on an extreme angle. 

## **7.2. Pull forces on the cable after connectors are mated** 

After the connectors are mated, do not apply a load to the cable in excess of the values indicated in the diagram below. 

Page 8 of 10 

SPE-12-8-018/E/SS 

## **8. Technical Drawing** 

Page 9 of 10 

SPE-12-8-018/E/SS 

## **9. Packaging** 

Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. 

Reproduction, use or disclosure to third parties without express permission is strictly prohibited. 

Copyright © Taoglas Ltd. 

Page 10 of 10 

SPE-12-8-018/E/SS