Image not available
Illustrative purposes only
AGGP.25F.07.0060A
Patch Antenna, 1.574GHz to 1.61GHz, 2 VSWR, 0dBi Gain, 50ohm, Right Hand Circular Polarisation,
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TAOGLAS
- Product type:
- Antenna Type:Patch; Frequency Min:1.574GHz; Frequency Max:1.61GHz; Antenna Mounting:I-Pex Connector; Gain:0dBi; VSWR:2; Input Power:-; Input Impedance:50ohm; Antenna Polarisation:Right Hand
- Gain: 0dBi
- SVHC: To Be Advised
- VSWR: 2
- Input Power: -
- Antenna Type: Patch
- Frequency Max: 1.61GHz
- Frequency Min: 1.574GHz
- Product Range: -
- Input Impedance: 50ohm
- Antenna Mounting: I-Pex Connector
- Antenna Polarisation: Right Hand Circular
| Delivery and price | |
|---|---|
| Units per pack | 250 |
| Price | 9.07 € |
| Current stock | 10+ |
| Lead time | 30 days |
## **SPECIFICATION** Part No. : **AGGP.25F.07.0060A** - Product Name : 25mm Two Stage GPS-GLONASS-GALILEO GNSS Active Patch Antenna Module with Front-end Saw Filter - Features : Industry leading GPS-GLONASS-GALILEO antenna performance - 25.1*25.1*7.4mm (Ground Plane) 60mm Ø1.13 IPEX MHFI (U.FL) 28dB LNA Wide Input Voltage 1.8V to 5.5V Low Power Consumption RoHS Compliant SPE-12-8-015/B/SS Page 1 of 9 ## **1. Introduction** The AGGP.25F GPS/GLONASS/GALILEO GNSS active patch antenna (along with the AGGP.35 model) is the best choice to use as an embedded antenna with the latest generation of GPS/GLONASS/GALILEO GNSS receivers. It utliizes a 25.1*25.1*4mm advanced wide-band ceramic patch antenna with optimized gain, radiation patttern and axial ratio at GPS, GLONASS and GALILEO centre frequencies. The AGGP.25F aslo includes a two stage LNA and a front-end SAW filter to reduce out of band noise such as from nearby cellular transceiver, and improve probability of the wireless device passing radiated spurious emissions certification. Produced in TS16949 automotive quality approved facility and 100% tested for gain (S21), return loss (S11) to ensure total consistency of performance. Cable type, length and connectors can be customized and samples offered according to requirement, subject to minimum order quantities in production. Taoglas also offers custom tuning service based on minimum order quantities, contact your local regional sales office for details. The AGGP.25F consists of 2 functional blocks – the LNA and also the patch antenna. SPE-12-8-015/B/SS Page 2 of 9 ## **2. Specification** |CERAMIC PATCH<br>~~Eee~~|CERAMIC PATCH<br>~~Eee~~|CERAMIC PATCH<br>~~Eee~~|CERAMIC PATCH<br>~~Eee~~| |---|---|---|---| |Frequency<br>~~Eee~~|1574~1610MHz<br>~~Eee~~||| |Gain @ Zenith|1575.42MHz 1.5 dBic Typ. @ Zenith<br>1602MHz +0 dBic Typ. @ Zenith||| |Gain at 90with LNA|1575.42MHz: 26.53dBic<br>1602MHz: 28 ± 3dBic||| |Polarization|RHCP||| |Axial Ratio|3.0dB max.@Zenith<br>~~:~~||| |Patch Dimension|25.1*25.1*4mm<br>~~:~~||| |LNA<br>~~Eee~~|||| |Frequency|1574~1610MHz||| |Outer Band Attenuation|1592±140MHz 15dB min.||| |Output Impedance|50Ω||| |Output VSWR|2.0 Max||| |Pout at 1dB Gain<br>Compression point|Typ. -2dBm||| ||Min. -6dBm||| |Input Voltage|Min:1.8V Typ. 3.0V Max:5V||| |LNA Gain, Power Consumption and Noise Figure|||| |Voltage|LNA Gain<br>(Typ)|Power Consumption(mA) Typ|Noise Figure Typ| |Min. 1.8V|22dB|5mA|2.6dB| |Typ. 3.0V|28dB|10mA|2.6dB| |Max. 5.5V|31dB|23mA|2.9dB| |MECHANICAL<br>~~Eee~~|||| |Dimensions|25.1*25.1*7.4mm||| |RF Cable|Coaxial CableØ1.13 ± 0.1mm, length 60 ± 2.5mm||| |Connector|IPEX MHFI (U.FL)||| |ENVIRONMENTAL<br>~~eee~~|||| |Operation Temperature|-40°C to + 85°C||| |Storage Temperature|-40°C to + 85°C||| |Relative Humidity|40% to 95%||| SPE-12-8-015/B/SS Page 3 of 9 ## **3. LNA Gain and Out Band Rejection @3.0V** Page 4 of 9 SPE-12-8-015/B/SS ## **4. LNA Noise Figure @3.0V** SPE-12-8-015/B/SS Page 5 of 9 ## **5. Technical Drawing** SPE-12-8-015/B/SS Page 6 of 9 ## **6. Radiation Patterns** ## **6.1. 1575.42MHz XZ & YZ Plane** ## **6.2. 1602MHz XZ &YZ Plane** SPE-12-8-015/B/SS Page 7 of 9 ## **7. Plugs Usage Precautions** ## **7.1. Mating / Unmating** (1) To disconnect connectors, insert the end portion of I-PEX under the connector flanges and pull off vertically, in the direction of the connector mating axis. (2) To mate the connectors, the mating axes of both connectors must be aligned and the connectors can be mated. The "click" will confirm fully mated connection. Do not attempt to insert on an extreme angle. ## **7.2. Pull forces on the cable after connectors are mated** After the connectors are mated, do not apply a load to the cable in excess of the values indicated in the diagram below. SPE-12-8-015/B/SS Page 8 of 9 ## **8. Packaging** Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © Taoglas Ltd. Page 9 of 9 SPE-12-8-015/B/SS
Updated at June 9, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →