ABL8REM24030

Product data sheet Characteristics 

ABL8REM24030 regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 3 A 

## Main 

|Main||
|---|---|
|Commercial Status|Commercialised|
|Range of product<br>~~a~~|Phaseo<br>~~a~~|
|Product or component<br>type|Power supply<br>~~eo~~|
|Power supply type<br>~~a~~|Regulated switch mode<br>~~a~~|
|Input voltage|110...220 V DC|
||100...240 V AC single phase, terminal(s): N-L1<br>100...240 V AC phase to phase, terminal(s): L1-L2|
|Output voltage<br>Rated power in W<br>~~—_———~~|24 V DC<br>72 W|
|Input protection type|Integrated fuse (not interchangeable)|
|Power supply output<br>current<br>Output protection type|3 A<br>Against undervoltage, protection technology: tripping<br>if U < 0.8 x Un<br>Against short-circuits, protection technology: auto-<br>matic reset<br>Against overvoltage, protection technology: tripping<br>if U > 1.5 x Un<br>Against overload, protection technology: 1.1 x In|



|Complementary<br>Input voltage limits<br>Network frequency<br>Inrush current<br>Cos phi<br>Efficiency<br>Output voltage limits<br>Power dissipation in W<br>Current consumption<br>Line and load regulation<br>Holding time<br>Connections - terminals<br>Marking<br>Mounting support<br>Operating position<br>Output coupling|100...250 V<br>85...264 V<br>47...63 Hz<br><= 30 A<br>0.65<br>> 85 %<br>100...120 % adjustable<br>12.7 W<br>1.46 A at 100 V<br>0.83 A at 240 V<br>+/- 3 %<br>>= 10 ms at 240 V<br>>= 10 ms at 100 V<br>Screw type terminals for output ground connection, connection capacity: 1 x<br>0.14...1 x 2.5 mm²AWG gauge26...14<br>Screw type terminals for output connection, connection capacity: 2 x 0.14...2 x<br>2.5 mm²AWG gauge26...14<br>Screw type terminals for input ground connection, connection capacity: 1 x<br>0.14...1 x 2.5 mm²AWG gauge26...14<br>Screw type terminals for input connection, connection capacity: 2 x 0.14...2 x 2.5<br>mm²AWG gauge26...14<br>CE<br>35 x 15 mm symmetrical DIN rail<br>35 x 7.5 mm symmetrical DIN rail<br>75 x 7.5 mm symmetrical DIN rail<br>Vertical<br>Parallel<br>Series|
|---|---|



Oct 1, 2015 

1 

|Name of test|Surge conforming to EN/IEC 61000-4-5|
|---|---|
||Rapid transient conforming to IEC 61000-4-4|
||Radiated electromagnetic field conforming to EN/IEC 61000-4-3|
||Primary outage conforming to IEC 61000-4-11|
||Induced electromagnetic field conforming to EN/IEC 61000-4-6|
||Emission conforming to EN 50081-1|
||Electrostatic discharges conforming to EN/IEC 61000-4-2|
||Conducted/Radiated emissions conforming to EN 55022 Class B|
||Conducted/Radiated emissions conforming to EN 55011|
|Status LED|1 LED orange for input voltage|
||1 LED green for output voltage|
|Depth|120 mm|
|Height|120 mm|
|Width|27 mm|
|Product weight|0.52 kg|



|Environment||
|---|---|
|Product certifications|CCSAus|
||CSA 22-2 No 950-1|
||C-Tick|
||CULus 508|
||TUV 60950-1|
|Environmental characteristic|Safety conforming to SELV|
||Safety conforming to EN/IEC 60950|
||EMC conforming to EN/IEC 61000-6-2|
||EMC conforming to EN 50082-2|
||EMC conforming to EN 50081-1|
|IP degree of protection|IP20 conforming to EN/IEC 60529|
|Ambient air temperature for storage|-25...70 °C|
|Relative humidity|0...95 % without condensation or dripping water|
|Class of protection against electric shock|Class I conforming to VDE 0106-1|
|Dielectric strength|500 V between outputs|
||500 V between output and ground|
||3000 V between input and output|
||3000 V between input and ground|



2 

Product data sheet Dimensions Drawings 

## ABL8REM24030 

Regulated Switch Mode Power Supply 

## Dimensions and Mounting 

Mounting on a 35 mm/1.37 in. or 75 mm/2.95 in. Rail 

3 

Product data sheet Connections and Schema 

## ABL8REM24030 

Regulated Switch Mode Power Supply 

## Internal Wiring Diagram 

## Regulated Switch Mode Power Supplies 

## Series or Parallel Connection 

|Series or Parallel Connection||
|---|---|
|Series Connection||
|TT<br>is<br>|<br>ABL8REM<br>|<br>|<br>ABLEREM<br>|<br>|<br>ABL7RP<br>|<br>|<br>ABLTRP<br>|<br>|<br>oe<br>=<br>4<br>|<br>o#<br>=<br>|<br>|___—_-__-_-____]<br>eee||
|(1)<br>(1)||
|L_]||
|oe||
|28 Vout flout||
|(1)<br>Two Shottky diodes Imin = power supply In and Vmin = 50 V||
|Parallel Connection||
|ay<br>4<br>|<br>ABLSREM<br>|<br>|<br>ABLAREM<br>|<br>|<br>ABL7RP<br>|<br>|<br>ABL?RP<br>|||
|on||
|Uour2 # lout||
|Family<br>Series|Parallel|
|ABL 8REM/7RP<br>2 products max.|2 products max.|



Series or parallel connection is only recommended for products with identical references. 

4 

Product data sheet Performance Curves 

## ABL8REM24030 

## Regulated Switch Mode Power Supplies 

## Derating 

The ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. If the temperature around the electronic components is too high, their life will be significantly reduced. 

The nominal ambient temperature for the Optimum range of Phaseo power supplies is 50 °C. Above this temperature, derating is necessary up to a maximum temperature of 60 °C. 

The graph below shows the power as a percentage of the nominal power that the power supply can deliver continuously, depending on the ambient temperature. 

- X Maximum operating temperature (°C) 

- (1) ABL 8REM, ABL 7RP mounted vertically 

Derating should be considered in extreme operating conditions: 

- Intensive operation (output current permanently close to the nominal current, combined with a high ambient temperature) 

- Output voltage set above 24 Vdc (to compensate for line voltage drops, for example) 

- Parallel connection to increase the total power 

## Regulated Switch Mode Power Supply 

## Load Limit 

## Regulated Switch Mode Power Supply 

## Temporary Overloads 

5