6ES7155-6AA01-0BN0

**6ES7155-6AA01-0BN0** 

**Data sheet** 

SIMATIC ET 200SP, PROFINET bundle IM, IM 155-6PN ST, max. 32 I/O modules and 16 ET 200AL modules, single hot swap, bundle consists of: Interface module (6ES7155-6AU01-0BN0), Server module (6ES7193-6PA00-0AA0), BusAdapter BA 2xRJ45 (6ES7193-6AR00-0AA0) 

|**General information**||
|---|---|
|Product type designation|IM155-6PN ST, includingBusAdapter BA 2x RJ45|
|HW functional status|From FS03|
|Firmware version|V4.2|
|● FW updatepossible|Yes|
|Product function||
|● I&M data|Yes; I&M0 to I&M3|
|● Module swappingduringoperation(hot swapping)|Yes; Single hot swapping|
|● Isochronous mode|No|
|Engineeringwith||
|● STEP 7 TIA Portal configurable/integrated from version|V14|
|● STEP 7 configurable/integrated from version|V5.5 SP4|
|● PROFINET from GSD version/GSD revision|GSDML V2.35|
|**Configuration control**||
|via dataset|Yes|
|**Supply voltage**||
|Rated value(DC)|24 V|
|permissible range, lower limit(DC)|19.2 V|
|permissible range, upper limit(DC)|28.8 V|
|Reversepolarity protection|Yes|
|Short-circuitprotection|Yes|
|Mains buffering||
|● Mains/voltage failure stored energytime|10 ms|
|**Input current**||
|Current consumption(rated value)|450 mA|
|Current consumption, max.|550 mA|
|Inrush current, max.|3.7 A|
|I²t|0.09 A²·s|
|**Power loss**||
|Power loss, typ.|1.9 W|
|**Address area**||
|Address spaceper module||
|● Address spaceper module, max.|256 byte; For input and output data respectively|
|Address spaceper station||
|● Address space per station, max.|512 byte|
|**Hardware configuration**||
|Rack||
|● Quantity of operable ET 200SP modules, max.|32|



6ES71556AA010BN0 Page 1/4 

Subject to change without notice © Copyright Siemens 

5/17/2026 

|● Quantityof operable ET 200AL modules, max.|16|
|---|---|
|Submodules||
|● Number of submodules per station, max.|256|
|**Interfaces**||
|Number of PROFINET interfaces|1; 2 ports(switch)|
|**1. Interface**||
|Interface types||
|● RJ 45(Ethernet)|Yes; with BusAdapter|
|● Number ofports|2; with BusAdapter|
|● integrated switch|Yes|
|● BusAdapter(PROFINET)|Yes; BA 2x RJ45, BA 2x FC, BA 2x M12|
|Protocols||
|● PROFINET IO Device|Yes|
|● Open IE communication|Yes|
|● Media redundancy|Yes; PROFINET MRP client|
|PROFINET IO Device||
|Services||
|— IRT|Yes; 250µs to 4 ms in 125µs frame|
|— PROFIenergy|Yes|
|— Prioritized startup|Yes|
|— Shared device|Yes|
|— Number of IO Controllers with shared device, max.|2|
|**Interface types**||
|RJ 45(Ethernet)||
|● Transmissionprocedure|PROFINET with 100 Mbit/s full duplex(100BASE-TX)|
|● 100 Mbps|Yes|
|● Autonegotiation|Yes|
|● Autocrossing|Yes|
|**Protocols**||
|Supportsprotocol for PROFINET IO|Yes|
|PROFIsafe|Yes|
|PROFIBUS|No|
|EtherNet/IP|No|
|Modbus TCP|No|
|Redundancymode||
|● PROFINET system redundancy (S2)|No|
|Media redundancy||
|— MRP|Yes|
|— MRPD|No|
|Open IE communication||
|● TCP/IP|Yes|
|● SNMP|Yes|
|● LLDP|Yes|
|**Interrupts/diagnostics/status information**||
|Status indicator|Yes|
|Alarms|Yes|
|Diagnostics function|Yes|
|Diagnostics indication LED||
|● RUN LED|Yes;green LED|
|● ERROR LED|Yes; red LED|
|● MAINT LED|Yes; Yellow LED|
|● Monitoringof the supplyvoltage(PWR-LED)|Yes;green PWR LED|
|● Connection displayLINK TX/RX|Yes; 2xgreen link LEDs on BusAdapter|
|**Potential separation**||
|between backplane bus and electronics|No|
|between PROFINET and all other circuits|Yes; 1500 V AC(type test)|
|between supplyand all other circuits|No|
|**Permissible potential difference**||



6ES71556AA010BN0 Page 2/4 

Subject to change without notice © Copyright Siemens 

5/17/2026 

|~~ee~~||||
|---|---|---|---|
|between different circuits<br>~~ee~~|Safetyextra low voltage SELV|||
|**Isolation**||||
|Isolation tested with|707 V DC(type test)|||
|**Standards, approvals, certificates**<br>~~a~~||||
|Network loadingclass<br>~~a~~<br>~~a~~|2<br>~~a~~<br>~~a~~|||
|Ecological footprint<br>~~a~~||||
|● environmentalproduct declaration|Yes|||
|Global warming potential||||
|—global warming potential,(total) [CO2 eq]|105 kg|||
|— global warming potential, (during production) [CO2<br>eq]|13.7 kg|||
|— global warming potential, (during operation) [CO2<br>eq]|91.9 kg|||
|— global warming potential, (after end of life cycle)<br>[CO2 eq]|-0.617 kg|||
|**Ambient conditions**<br>~~ee~~||||
|Ambient temperature duringoperation<br>~~ee~~||||
|● horizontal installation, min.|-30 °C; No condensation|||
|● horizontal installation, max.|60 °C|||
|● vertical installation, min.|-30 °C; No condensation|||
|● vertical installation, max.<br>~~a~~|50 °C<br>~~a~~|||
|Altitude duringoperation relatingto sea level<br>~~a~~||||
|● Installation altitude above sea level, max.|5 000 m; Restrictions for installation altitudes > 2 000 m, see manual|||
|**Connection method**<br>~~SE~~||||
|ET-Connection<br>~~SE~~||||
|● via BU/BA Send|Yes; + 16 ET 200AL modules|||
|**Dimensions**<br>~~a~~||||
|Width<br>~~a~~<br>~~OO~~|50 mm<br>~~a~~<br>~~OO~~|||
|Height<br>~~OO~~|117 mm<br>~~OO~~|||
|Depth<br>~~OO~~|74 mm<br>~~OO~~|||
|**Weights**||||
|Weight, approx.|147g; without BusAdapter|||
|**Classifications**<br>~~|~~||||
|eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>eClass<br>ETIM<br>ETIM<br>ETIM<br>ETIM<br>IDEA<br>UNSPSC<br>~~|~~||**Version**<br>~~|~~|**Classification**<br>~~|~~|
|||14<br>12<br>9.1<br>9<br>8<br>7.1<br>6<br>10<br>9<br>8<br>7<br>4<br>15|27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>27-24-26-08<br>EC001604<br>EC001604<br>EC001604<br>EC001604<br>3564<br>32-15-17-05|
|**Approvals / Certificates**<br>~~|~~||||
|**General Product Approval**<br>~~|~~||||



**General Product Approval** 

**Maritime application Environment** 

6ES71556AA010BN0 Page 3/4 

Subject to change without notice © Copyright Siemens 

5/17/2026 

> China RoHS ~~—~~ 

**last modified:** 

10/23/2025 

6ES71556AA010BN0 Page 4/4 

Subject to change without notice © Copyright Siemens 

5/17/2026