4GBJ404
Bridge Rectifier, VSIB Series, Single Phase, 400 V, 4 A, SIP, 4 Pins, 1.1 V
- Manufacturer: MULTICOMP PRO
- Product type: Bridge Rectifier Diodes
- No. of Phases:Single Phase; Repetitive Reverse Voltage Vrrm Max:400V; Forward Current If(AV):4A; Bridge Rectifier Case Style:SIP; Forward Voltage VF Max:1.1V; No. of Pins:4Pins; Opera
- SVHC: Lead (25-Jun-2025)
- No. of Pins: 4Pins
- No. of Phases: Single Phase
- Product Range: VSIB4
- Forward Voltage Max: 1.1V
- Forward Surge Current: 120A
- Average Forward Current: 4A
- Bridge Rectifier Mounting: Through Hole
- Operating Temperature Max: 150°C
- Bridge Rectifier Case Style: SIP
- Repetitive Peak Reverse Voltage: 400V
| Delivery and price | |
|---|---|
| Units per pack | 1000 |
| Price | 0.207 € |
| Current stock | 1000+ |
| Lead time | 30 days |
## Passivated Bridge Rectifiers
## **Features:**
- Surge overload rating -150 amperes peak.
- Ideal for printed circuit board.
- Reliable low cost construction utilizing moulded plastic technique.
- • Mounting position : Any.
Reverse Voltage - 50 to 1,000 Volts Forward Current - 4 Amperes
## **VSIB**
**==> picture [119 x 8] intentionally omitted <==**
**----- Start of picture text -----**<br>
Dimensions : Inches (Millimetres)<br>**----- End of picture text -----**<br>
**www.element14.com www.farnell.com www.newark.com**
11/07/11 V1.1
Page <1>
## Passivated Bridge Rectifiers
## **Maximum Ratings and Electrical Characteristics**
Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
|**Characteristics**|**Symbol**|**VSIB440**|**Units**|
|---|---|---|---|
|Maximum Recurrent Peak Reverse Voltage|VRRM|400|V|
|Maximum RMS Voltage|VRMS|280||
|Maximum DC Blocking Voltage|VDC|400||
|Maximum Average Forward (with heatsink Note 2)<br>Rectified Current<br>at TC = 100°C (without heatsink)|I (AV)|4<br>2.4|A|
|Peak Forward Surge Current<br>8.3 ms Single Half Sine-wave<br>Super Imposed on Rated Load (JEDEC Method)|IFSM|120||
|Maximum Forward Voltage at 4 A dc|VF|1.1|V|
|Maximum DC Reverse Current<br>at TJ = 25°C<br>at Rated DC Blocking Voltage<br>at TJ = 125°C|IR|10<br>500|µA|
|I2t Rating for Fusing (t < 8.3 ms)|I2t|93|A2s|
|Typical Junction Capacitance Per Element (Note 1)|CJ|45|pF|
|Typical Thermal Resistance|RθJC|2.2|°C/W|
|Operating Temperature Range|TJ|-55 to +150|°C|
|Storage Temperature Range|TSTG|||
**Notes :** 1. Measured at 1 MHz and applied reverse voltage of 4 V dc. 2. Device mounted on 50 × 50 × 1.6 mm Cu plate heatsink.
## **Rating and Characteristic Curves**
## **Forward Current Derating Curve**
**Maximum Non-repetitive Surge Current**
**==> picture [476 x 175] intentionally omitted <==**
**----- Start of picture text -----**<br>
5.0LLLtf oetvestine E FFE.<br>. T= 25°C<br>On as OO wee<br>wenn ST ANTES<br>P|, MithoutHeatsink ON[| 1 NT<br>20hINNt a<br>1.0| ResistiveSingle Phaseor Inductive Half WaveLoad 60 Hz NwNAes 25"ee etna a<br>wlth), bes oot LL OE<br>a5 50 75 100 125 150 0 2 5 10020<br>Case Temperature, °C Number of Cycles at 60 Hz<br>Amperes<br>Peak Forward Surge Current,<br>Average Forward Current Amperes<br>**----- End of picture text -----**<br>
**www.element14.com www.farnell.com www.newark.com**
11/07/11 V1.1
Page <2>
## Passivated Bridge Rectifiers
## **Rating and Characteristic Curves**
**==> picture [137 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
Typical Forward Characteristics<br>**----- End of picture text -----**<br>
**==> picture [137 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
Typical Reverse Characteristics<br>**----- End of picture text -----**<br>
**==> picture [233 x 209] intentionally omitted <==**
**----- Start of picture text -----**<br>
y= 190<br>oi {| | ff] | | |<br>A<br>|FSHAREERRH<br>0.04 ey tT tt<br>0 o2 O04 Of O8 10 12 14<br>Instantaneous Forward Voltage, Volts<br>Instantaneous Forward Current, (A)<br>**----- End of picture text -----**<br>
**==> picture [20 x 139] intentionally omitted <==**
**----- Start of picture text -----**<br>
(µA)<br>Instantaneous Reverse Current,<br>**----- End of picture text -----**<br>
**==> picture [127 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
Typical Junction Capacitance<br>**----- End of picture text -----**<br>
**==> picture [135 x 20] intentionally omitted <==**
**----- Start of picture text -----**<br>
Percent of Rated Peak Reverse<br>Voltage, (%)<br>**----- End of picture text -----**<br>
**==> picture [196 x 130] intentionally omitted <==**
**----- Start of picture text -----**<br>
ee<br>|<br>a<br>10<br>1.0 10.0<br>Reverse Voltage, (Volts)<br>Capacitance, (pF)<br>**----- End of picture text -----**<br>
**Important Notice :** This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011.
**www.element14.com www.farnell.com www.newark.com**
11/07/11 V1.1
Page <3>
Updated at June 8, 2026
Multicomp Pro is a trusted manufacturer of high-quality electronic components, built upon the rich heritage of established industry names such as SPC Technology, Tenma, Duratool, and Pro Power. Developed to provide engineers and procurement professionals with exceptional value, the brand offers an extensive portfolio of rigorously lab-tested products. By combining strict quality assurance with cost-effective manufacturing, Multicomp Pro delivers premium reliability while providing significant savings compared to leading industry alternatives. The brand's comprehensive lineup is anchored by a vast selection of passive components and essential circuit protection devices. Engineers consistently rely on Multicomp Pro for aluminum electrolytic capacitors, film capacitors, and power inductors designed for demanding applications. The protection portfolio is equally robust, featuring hundreds of standard fuses, resettable fuses, and transient voltage suppression (TVS) diodes to safeguard critical circuitry. Furthermore, the company is a major provider of precision timing solutions, including a wide array of reliable crystals and standard oscillators. Beyond passives and board-level protection, Multicomp Pro offers extensive solutions in power management, discrete semiconductors, and connectivity. This includes highly efficient AC/DC converters, bridge rectifiers, bipolar transistors, and a versatile selection of wire-to-board terminal blocks. Backed by comprehensive factory audits, continuous laboratory testing, and a strong commitment to ethical sourcing, Multicomp Pro ensures that every component consistently meets stringent international safety and performance standards.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →