48.52.7.024.0050SPA

General Purpose Relay, 48 Series, Interface, DPDT, 24 VDC, 8 A

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: FINDER
Product type: Power Relays
Contact Configuration:DPDT; Coil Voltage:24VDC; Contact Current:8A; Product Range:48 Series; Relay Mounting:DIN Rail; Coil Type:DC Sensitive; Contact Voltage VAC:250VAC; Relay Terminals:Screw; Co
SVHC: No SVHC (04-Feb-2026)
Coil Type: DC Sensitive
Coil Voltage: 24VDC
Product Range: 48 Series
Relay Mounting: DIN Rail
Coil Resistance: -
Contact Current: 8A
Relay Terminals: Screw
Contact Material: Silver Nickel
Contact Voltage VAC: 250VAC
Contact Voltage VDC: 30V
Approvals & Standards: CSA, UL, VDE
Contact Configuration: DPDT
Delivery and price
Units per pack	50
Price	13.89 €
Current stock	200+
Lead time	30 days
Datasheet
**48 SЕRIES** 

## Relay Interface Modules 8 - 10 -16 A 

Control panels Carousel warehouses Medical and dentistry Shipyards Elevators and lifts Panels for electrical distribution Building automation Hoists and cranes 

**48 SERIES** 

**B** 

> **2 CO forcibly guided contacts relay interface 48.12 modules,15.8 mm wide** 

## **Type 48.12** 

- 2 CO 8 A 

- - Screw terminals 

- Relay with forcibly guided contacts according to EN 61810-3 Type B (previously EN 50205) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material 

48.12 

## Screw terminal 

- 2 CO 8 A • Forcibly guided contacts relay • Screw terminals 

According to EN 61810-3 only 1 NO and 1 NC (11-14 and 21-22 or 11-12 and 21-24) shall be used as forcibly guided contacts. 

For outline drawing see page 11 

||**Contact specification**<br>Contact configuration||2 CO (DPDT)|
|---|---|---|---|
||Rated current/Maximum peak current<br>A||8/15<br>~~ee~~|
||Rated voltage/<br>Maximum switchingvoltage<br>V AC<br>Rated load AC1<br>VA<br>Rated load AC15 (230 V AC)<br>VA<br>Single phase motor rating (230 V AC)<br>kW||250/400<br>2000<br>500<br>0.37<br>~~a~~<br>~~PO~~<br>~~ee~~<br>~~Pe~~|
||Breaking capacity DC1: 30/110/220 V<br>A||8/0.65/0.2<br>~~PO~~|
||Minimum switching load|mW (V/mA)|500 (10/10)<br>~~PO~~|
||Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V AC (50/60 Hz)|AgNi+Au<br>—|
|||V DC|12 - 24<br>~~ee~~|
||Rated power AC/DC|VA (50 Hz)/W|—/0.7<br>~~ee~~|
||Operating range|AC|—<br>~~ee~~|
|||DC|(0.75…1.2)UN<br>~~ee~~|
||Holding voltage|AC/DC|—/0.4 UN<br>~~ee~~|
||Must drop-out voltage<br>**Technical data**|AC/DC|—/0.1 UN|
||Mechanical life AC/DC|cycles|—/10 · 106|
||Electrical life at rated load AC1|cycles|100 · 103<br>~~pO~~|
||Operate/release time|ms|10/4<br>~~ee~~|
|X-2017, www.findernet.com|Insulation between coil<br>and contacts(1.2/50µs)<br>kV<br>Dielectric strength<br>between open contacts<br>V AC<br>Ambient temperature range<br>°C<br>Protection category<br>**Approvals relay**(according to type)||6(8 mm)<br>1500<br>–40…+70<br>IP 20<br>~~a~~<br>~~a~~<br>~~ee~~<br>~~pe~~<br>C€<br>HAL @ A Wis|



**3** 

**48 SERIES** 

## **1 CO relay interface modules, 15.8 mm wide** 

**==> picture [26 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P3<br>**----- End of picture text -----**<br>


**==> picture [25 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.31<br>**----- End of picture text -----**<br>


## **Ideal interface for PLC and electronic systems** 

## **Type 48.P3** 

- 1 CO 10 A 

- Push-in terminals 

## **Type 48.31** 

**B** 

- 1 CO 10 A 

- Screw terminals 

- AC coils or DC sensitive coils 

- Supply status indication and EMC coil suppression module as standard 

- 1 CO 10 A 

- Push-in terminals 

   - 1 CO 10 A 

   - Screw terminals 

- Identification label 

- UL Listing (certain relay/socket combinations) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material 

48.P3 48.31 Push-in terminal Screw terminal 

|For outline drawing see page 11||||||
|---|---|---|---|---|---|
|**Contact specification**<br>Contact configuration||1 CO (SPDT)|||1 CO (SPDT)|
|Rated current/Maximum peak current<br>A||10/20|||10/20|
|Rated voltage/<br>Maximum switchingvoltage|V AC|250/400|||250/400|
|Rated load AC1|VA|2500|||2500|
|Rated load AC15 (230 V AC)|VA|500|||500|
|Single phase motor rating (230 V AC)<br>kW||0.37|||0.37|
|Breaking capacity DC1: 30/110/220 V<br>A||10/0.3/0.12|||10/0.3/0.12|
|Minimum switching load|mW (V/mA)|300 (5/5)|||300 (5/5)|
|Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V AC (50/60 Hz)|AgNi<br>12 - 24 - 110 - 120 - 230|||AgNi<br>12 - 24 - 110 - 120 - 230|
||V DC|12 - 24 - 125|||12 - 24 - 125|
|Rated power AC/sens. DC|VA (50 Hz)/W|1.2/0.5|||1.2/0.5|
|Operating range|AC|(0.8…1.1)UN|||(0.8…1.1)UN|
||sens. DC|(0.73…1.5)UN|||(0.73…1.5)UN|
|Holding voltage|AC/DC|0.8 UN/ 0.4 UN|||0.8 UN/ 0.4 UN|
|Must drop-out voltage<br>**Technical data**|AC/DC|0.2 UN/ 0.1 UN|||0.2 UN/ 0.1 UN|
|Mechanical life|cycles|10 · 106|||10 · 106|
|Electrical life at rated load AC1|cycles|200 · 103|||200 · 103|
|Operate/release time|ms|7/4 (AC) - 12/12 (DC)|||7/4 (AC) - 12/12 (DC)|
|Insulation between coil||||||
|and contacts(1.2/50µs)<br>Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Protection category|kV<br>V AC<br>°C|6(8 mm)<br>1000<br>–40…+70<br>IP 20<br>~~Ce@HH®~~|~~®~~|~~BRINA~~|6(8 mm)<br>1000<br>–40…+70<br>IP 20<br>~~RINAOWs&~~|
|**Approvals relay**(according to type)||~~Ce@HH®~~|~~®~~|~~BRINA~~|~~RINAOWs&~~|



**4** 

**48 SERIES** 

**B** 

**2 CO relay interface modules, 15.8 mm wide** 

**==> picture [26 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P5<br>**----- End of picture text -----**<br>


**==> picture [26 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.52<br>**----- End of picture text -----**<br>


**Ideal interface for PLC and electronic systems** 

## **Type 48.P5** 

- 2 CO 8 A 

- Push-in terminals 

**Type 48.52** 

- 2 CO 8 A 

- Screw terminals 

**==> picture [100 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• AC coils or DC sensitive coils<br>**----- End of picture text -----**<br>


- Supply status indication and EMC coil suppression module as standard 

- • Identification label • UL Listing (certain relay/socket combinations) 

**==> picture [35 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• 2 CO 8 A<br>**----- End of picture text -----**<br>


- Push-in terminals 

**==> picture [34 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• 2 CO 8 A<br>**----- End of picture text -----**<br>


**==> picture [59 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
• Screw terminals<br>**----- End of picture text -----**<br>


**==> picture [115 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
• 35 mm rail (EN 60715) mounting<br>**----- End of picture text -----**<br>


- Cadmium-free contact material 

48.P5 48.52 Push-in terminal Screw terminal 

||For outline drawing see page 11||||||
|---|---|---|---|---|---|---|
||**Contact specification**<br>Contact configuration||2 CO (DPDT)|||2 CO (DPDT)|
||Rated current/Maximum peak current<br>A||8/15|||8/15|
||Rated voltage/<br>Maximum switchingvoltage|V AC|250/250|||250/250|
||Rated load AC1|VA|2000|||2000|
||Rated load AC15 (230 V AC)|VA|400|||400|
||Single phase motor rating (230 V AC)<br>kW||0.3|||0.3|
||Breaking capacity DC1: 30/110/220 V<br>A||8/0.3/0.12|||8/0.3/0.12|
||Minimum switching load|mW (V/mA)|300 (5/5)|||300 (5/5)|
||Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V AC (50/60 Hz)|AgNi<br>12 - 24 - 110 - 120 - 230|||AgNi<br>12 - 24 - 110 - 120 - 230|
|||V DC|12 - 24 - 125|||12 - 24 - 125|
||Rated power AC/sens. DC|VA (50 Hz)/W|1.2/0.5|||1.2/0.5|
||Operating range|AC|(0.8…1.1)UN|||(0.8…1.1)UN|
|||sens. DC|(0.73…1.5)UN|||(0.73…1.5)UN|
||Holding voltage|AC/DC|0.8 UN/ 0.4 UN|||0.8 UN/ 0.4 UN|
||Must drop-out voltage<br>**Technical data**|AC/DC|0.2 UN/ 0.1 UN|||0.2 UN/ 0.1 UN|
||Mechanical life|cycles|10 · 106|||10 · 106|
||Electrical life at rated load AC1|cycles|100 · 103|||100 · 103|
||Operate/release time|ms|7/4 (AC) - 12/12 (DC)|||7/4 (AC) - 12/12 (DC)|
||Insulation between coil||||||
||and contacts(1.2/50µs)|kV|6(8 mm)|||6(8 mm)|
|X-2017, www.findernet.com|Dielectric strength<br>between open contacts<br>V AC<br>Ambient temperature range<br>°C<br>Protection category<br>**Approvals relay**(according to type)||1000<br>–40…+70<br>IP 20<br>~~C€@HT~~|~~©~~|~~BRINA~~|1000<br>–40…+70<br>IP 20<br>~~RINA©Wis@~~|



**5** 

**48 SERIES** 

## **1 CO relay interface modules,** 

**==> picture [26 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P6<br>**----- End of picture text -----**<br>


**==> picture [25 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.61<br>**----- End of picture text -----**<br>


## **15.8 mm wide** 

## **Ideal interface for PLC and electronic systems** 

## **Type 48.P6** 

- 1 CO 16 A 

- Push-in terminals 

## **Type 48.61** 

**B** 

- 1 CO 16 A 

- Screw terminals 

- AC coils or DC sensitive coils 

- Supply status indication and EMC coil suppression module as standard 

- 1 CO 16 A 

- Push-in terminals 

   - 1 CO 16 A 

   - Screw terminals 

- Identification label 

- UL Listing (certain relay/socket combinations) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material available 

48.P6 48.61 Push-in terminal Screw terminal 

- For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 

- For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 

|For outline drawing see page 11||(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|(21 with 11, 24 with 14, 22 with 12).|
|---|---|---|---|---|---|---|---|
|**Contact specification**<br>Contact configuration||||1 CO (SPDT)||1 CO (SPDT)||
|Rated current/Maximum peak current<br>A||||16*/30|||16*/30|
|Rated voltage/<br>Maximum switchingvoltage|V AC|||250/400||250/400||
|Rated load AC1|VA|||4000|||4000|
|Rated load AC15 (230 V AC)|VA|||750|||750|
|Single phase motor rating (230 V AC)|Single phase motor rating (230 V AC)<br>kW|||0.55|||0.55|
|Breaking capacity DC1: 30/110/220 V<br>A||||16/0.3/0.12||16/0.3/0.12||
|Minimum switching load|mW (V/mA)|||500 (10/5)||500 (10/5)||
|Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)|V AC (50/60 Hz)|12 - 24 - 110 - 120 - 230|AgCdO<br>12 - 24 - 110 - 120 - 230||AgCdO<br>12 - 24 - 110 - 120 - 230|||
||V DC|||12 - 24 - 125||12 - 24 - 125||
|Rated power AC/sens. DC|VA (50 Hz)/W|||1.2/0.5|||1.2/0.5|
|Operating range|AC|||(0.8…1.1)UN||(0.8…1.1)UN||
||sens. DC|||(0.8…1.5)UN||(0.8…1.5)UN||
|Holding voltage|AC/DC||0.8 UN/ 0.4 UN|||0.8 U|0.8 UN/ 0.4 UN|
|Must drop-out voltage<br>**Technical data**|AC/DC||0.2 UN/ 0.1 UN|||0.2 U|0.2 UN/ 0.1 UN|
|Mechanical life|cycles|||10 · 106|||10 · 106|
|Electrical life at rated load AC1|cycles|||100 · 103||100 · 103||
|Operate/release time|ms|7/4 (AC) - 12/12 (DC)||7/4 (AC) - 12/12 (DC)|7/4 (AC) - 12/12 (DC)|||
|Insulation between coil||||||||
|and contacts(1.2/50µs)<br>Dielectric strength<br>between open contacts<br>Ambient temperature range<br>Protection category|kV<br>V AC<br>°C|CESHLOBRINAGCWsOSs|OBRINAGCWsOSs|6(8 mm)<br>1000<br>–40…+70<br>IP 20<br>OBRINAGCWsOSs|CEGFL|6(8 mm)<br>1000<br>–40…+70<br>IP 20<br>@RINAAs||
|**Approvals relay**(according to type)||CESHLOBRINAGCWsOSs|OBRINAGCWsOSs|OBRINAGCWsOSs|CEGFL|@RINA|@RINAAs|



**6** 

**48 SERIES** 

**B** 

**2 CO relay interface modules, 15.8 mm wide** 

**==> picture [26 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P8<br>**----- End of picture text -----**<br>


**==> picture [26 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.62<br>**----- End of picture text -----**<br>


**Ideal interface for PLC and electronic systems** 

**Type 48.P8** 

- 2 CO 10 A 

- Push-in terminals 

**Type 48.62** 

- 2 CO 10 A 

- Screw terminals 

- DC sensitive coils 

- Supply status indication and EMC coil suppression module as standard 

- 2 CO 10 A 

- Push-in terminals 

   - 2 CO 10 A 

   - Screw terminals 

- Identification label 

- UL Listing (certain relay/socket combinations) 

- 35 mm rail (EN 60715) mounting 

- Cadmium-free contact material 

48.P8 48.62 Push-in terminal Screw terminal 

|For outline drawing see page 11|||
|---|---|---|
|**Contact specification**<br>Contact configuration<br>2 CO (DPDT)<br>2 CO (DPDT)<br>Rated current/Maximum peak current<br>A<br>10/20<br>10/20<br>Rated voltage/<br>Maximum switchingvoltage<br>V AC<br>250/400<br>250/400<br>~~a~~|||
|Rated load AC1|VA<br>2500|2500|
|Rated load AC15 (230 V AC)<br>VA<br>500<br>500<br>Single phase motor rating (230 V AC)<br>kW<br>0.37<br>0.37<br>Breaking capacity DC1: 30/110/220 V<br>A<br>10/0.3/0.12<br>10/0.3/0.12<br>Minimum switching load<br>mW (V/mA)<br>300 (5/5)<br>300 (5/5)<br>Standard contact material<br>AgNi<br>AgNi<br>**Coil specification**<br>Nominal voltage (UN)<br>V AC (50/60 Hz)<br>—<br>—<br>V DC<br>12 - 24 - 125<br>12 - 24 - 125<br>Rated power AC/sens. DC<br>VA (50 Hz)/W<br>—/0.5<br>—/0.5<br>Operating range<br>AC<br>—<br>—<br>sens. DC<br>(0.8…1.5)UN<br>(0.8…1.5)UN<br>Holding voltage<br>AC/DC<br>—/0.4 UN<br>—/0.4 UN<br>~~aee~~<br>~~aes~~<br>~~a~~<br>~~aaee~~|||
|Must drop-out voltage<br>**Technical data**|AC/DC<br>—/0.1 UN<br>—/0.1 UN||
|Mechanical life|cycles<br>20 · 106|20 · 106|
|Electrical life at rated load AC1|cycles<br>100 · 103<br>100 · 103||
|Operate/release time|ms<br>12/12 (DC)<br>12/12 (DC)||
|Insulation between coil|||
|and contacts(1.2/50µs)<br>kV<br>6(8 mm)<br>6(8 mm)<br>Dielectric strength<br>between open contacts<br>V AC<br>1000<br>1000<br>Ambient temperature range<br>°C<br>–40…+70<br>–40…+70<br>Protection category<br>IP 20<br>IP 20<br>**Approvals relay**(according to type)<br>~~es~~<br>~~a~~<br>CEGHI@BRINAOA:O&<br>CEGFL@RINAAdis|||



**7** 

**48 SERIES** 

## **Ordering information** 

Example:  48 series, 35 mm rail (EN 60715) mount, Push-in terminal relay interface module, 2 CO 8 A contacts, 24 V sensitive DC coil, green LED + diode, 99.02 coil indication. 

## **A B C D 4 8 . P 5 . 7 . 0 2 4 . 0 0 5 0** 

**B** 

**Series** 

## **Type** 

Screw terminal 

- 1 =  35 mm rail (EN 60715) mount, forcibly guided contacts relay 

- 3 =  35 mm rail (EN 60715) mount 

- 5 =  35 mm rail (EN 60715) mount 

6 =  35 mm rail (EN 60715) mount Push-in terminal P =  35 mm rail (EN 60715) mount 

## **A: Contact material** 

- 0 =  Standard AgNi for 48.P3/P5/P8/31/52/62 AgCdO, Standard for 48.P6/61 

- 4 =  AgSnO2, for 48.P6/P8/ 61/62 only 

- 5 =  AgNi + Au, for 48.12 and 48.P3/P5/31/52 only 

## **B: Contact circuit** 

## **D: Special versions** 

0 =  Standard 

- 7 =  Standard (for 48.12 only) 

## **C: Options** 

   - 0 =  Standard (for 48.12 only) 

   - 5 =  Standard for DC: green LED + diode (polarity +A1) 

   - 6 =  Standard for AC: green LED + Varistor 

- 0 =  CO (nPDT) 

## **Type** 

Screw terminal 

1 = for  48.31, 1 pole, 10 A 48.61, 1 pole, 16 A 

- 2 = for  48.12 (DC only), 48.52, 2 poles, 8 A 48.62 (DC only), 2 poles, 10 A 

Push-in terminal 

- 3 = for 48.P3, 1 pole, 10 A 

**Selecting features and options: only combinations in the same row are possible.** Preferred selections for best availability are shown in **bold.** 

- 5 = for 48.P5, 2 pole, 8 A 

- 6 = for 48.P6, 1 pole, 16 A 

- 8 = for 48.P8 (DC only), 2 pole, 10 A 

## **Coil version** 

7 =  Sensitive DC 

8 =  AC (50/60 Hz) 

9 = DC (for 48.12 only) 

## **Coil voltage** 

See coil specifications 

||**Type**<br>48.12|**Coil version**<br>DC|**A**<br>**5**|**B**<br>**0**|**C**<br>**0**|**D**<br>**7**|
|---|---|---|---|---|---|---|
||48.P3/P5/31/52|AC|**0**- 5|0|**6**|0|
||48.P3/P5/31/52<br>48.P6/61|Sensitive DC<br>AC|**0**- 5<br>**0**- 4|0<br>0|**5**<br>**6**|0<br>0|
||48.P6/61|Sensitive DC|**0**- 4|0|**5**|0|
||48.P8/62|Sensitive DC|**0**- 4|0|**5**|0|



## **Technical data** 

|**Insulation**|||**48.12/31/61/P3/P6 **|**48.52/P5**|**48.12/31/61/62/P3/P6/P8**|**48.12/31/61/62/P3/P6/P8**|
|---|---|---|---|---|---|---|
|Insulation according to EN 61810-1|insulation rated voltage<br>V||250|250|400||
||rated impulse withstand voltage<br>kV||4|4|4||
||pollution degree||3|2|2||
||overvoltage category||III|III|III||
|Insulation between coil and contacts (1.2/50µs)<br>kV|||6 (8 mm)||||
|Dielectric strength between open contacts<br>V AC|||1000; 1500 (48.12)||||
|Dielectric strength between adjacent contacts<br>V AC|||2000 (48.P5/52); 2500 (48.12/P6)||||
|**Insulation between coil terminals**|||||||
|Rated impulse voltage (surge) differential mode<br>(according to EN 61000-4-5)<br>kV(1.2/50 µs)|||2||||
|**Other data**|||||||
|Bounce time: NO/NC||ms|2/5; 2/10 (48.12)||||
|Vibration resistance (10…200)Hz: NO/NC||g|20/5 (for 1pole)||15/3; 20/6 (48.12) for 2pole||
|Power lost to the environment|without contact current|W|0.7||||
||with rated current|W|1.2 (48.12/31/P3)|1.3 (48.52/P5)|1.2 (48.61/62/P6/P8)||
|Wire striplength<br>||mm|8||||
|Screw torque (only for 48.12/31/52/61/81)||Nm|0.5||||
|Min. wire size|||**Screw terminal**||**Push-in terminal**||
||||solid cable|stranded cable|solid cable|stranded cable|
|||mm2|0.5|0.5|0.5|0.5|
|||AWG|21|21|21|21|
|Max. wire size||mm2|**Screw terminal**||**Push-in terminal**||
||||solid cable|stranded cable|solid cable|stranded cable|
||||1 x 6 / 2 x 2.5|1 x 4 / 2 x 2.5|2 x 1.5 / 1 x 2.5|2 x 1.5 / 1 x 2.5|
|||AWG|1 x 10 / 2 x 14|1 x 12 / 2 x 14|2 x 16 / 1 x 14|2 x 16 / 1 x 14|
||||||||



**8** 

**48 SERIES** 

**B** 

## **Contact specification** 

**F 48 - Electrical life (AC) v contact current** Types 48.P3/P6/31/61 

**==> picture [252 x 303] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cos ϕ = 1<br>Inductive load- cos ϕ  = 0.4<br>limit for 48.31<br>F 48 - Electrical life (AC) v contact current<br>Types 48.P5/52<br>Resistive load - cos ϕ = 1<br>Inductive load- cos ϕ = 0.4<br>Cycles<br>Cycles<br>**----- End of picture text -----**<br>


**==> picture [252 x 325] intentionally omitted <==**

**----- Start of picture text -----**<br>
H 48 - Maximum DC1 breaking capacity<br>Types 48.P3/P5/P6/31/52/61<br>48.P6/61 current limit<br>48.P3/31 current limit<br>48.P5/52 current limit<br>2 contacts in series<br>single contact<br>DC voltage (V)<br>H 48 - Maximum DC1 breaking capacity<br>Type 48.12<br>DC voltage (V)<br>DC breaking current (A)<br>DC breaking current (A)<br>**----- End of picture text -----**<br>


**F 48 - Electrical life (AC) v contact current** Types 48.P8/62 

**==> picture [213 x 108] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cos ϕ  = 1<br>Inductive load- cos ϕ  = 0.4<br>Cycles<br>**----- End of picture text -----**<br>


## **F 48 - Electrical life (AC) v contact current** 

Type 48.12 

**==> picture [214 x 108] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cos ϕ  = 1<br>Inductive load- cos ϕ  = 0.4<br>Cycles<br>**----- End of picture text -----**<br>


**H 48 - Maximum DC1 breaking capacity** Types 48.P8/62 

**==> picture [213 x 121] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 contacts in series<br>single contact<br>DC voltage (V)<br>DC breaking current (A)<br>**----- End of picture text -----**<br>


- When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 100 · 10[3] can be expected. 

- In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. 

**9** 

**48 SERIES** 

## **Coil specifications** 

**B** 

## **DC coil data (0.5 W sensitive)** 

|Nominal<br>voltage<br>UN|Coil<br>code|Operating range<br>Umin*<br>Umax|Operating range<br>Umin*<br>Umax|Rated coil<br>consumption<br>Iat UN|
|---|---|---|---|---|
|V||V|V|mA|
|12|**7**.012|8.8|18|41|
|24|**7**.024|17.5|36|22.2|
|125|**7**.125|91|188|4|



- Umin = 0.8 UN for 48.61, 48.62, 48.P6, 48.P8 

## **AC coil data** 

|**AC coil data**|||||
|---|---|---|---|---|
|Nominal<br>voltage<br>UN|Coil<br>code|Operating range<br>Umin<br>Umax||Rated coil<br>consumption<br>Iat UN(50 Hz)|
|V||V|V|mA|
|12|**8**.012|9.6|13.2|90.5|
|24|**8**.024|19.2|26.4|46|
|110|**8**.110|88|121|10.1|
|120|**8**.120|96|132|11.8|
|230|**8**.230|184|253|7.0|



## **DC coil data,** 2 pole relay - Type 48.12 

|Nominal<br>voltage<br>UN|Coil<br>code|Operating range<br>Umin<br>Umax|Operating range<br>Umin<br>Umax|Resistance<br>R|Rated coil<br>consumption<br>Iat UN|
|---|---|---|---|---|---|
|V||V|V|Ω|mA|
|12|**9**.012|9|14.4|205|58.5|
|24|**9**.024|18|28.8|820|29.3|



## **R 48 - DC coil operating range v ambient temperature** 

**==> picture [191 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P3/P5/31/52<br>48.P6/P8/61/62 1<br>48.P6/P8/61/62<br>2<br>48.P3/P5/31/52<br>**----- End of picture text -----**<br>


**==> picture [104 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 -   Max. permitted coil voltage.<br>**----- End of picture text -----**<br>


**2 -** Min. pick-up voltage with coil at ambient temperature. 

## **R 48 - AC coil operating range v ambient temperature** 

**==> picture [190 x 103] intentionally omitted <==**

**----- Start of picture text -----**<br>
1<br>2<br>**----- End of picture text -----**<br>


**==> picture [104 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 -   Max. permitted coil voltage.<br>**----- End of picture text -----**<br>


**==> picture [192 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 -   Min. pick-up voltage with coil at ambient temperature.<br>**----- End of picture text -----**<br>


## **R 48 - DC coil operating range v ambient temperature** 

## **Type 48.12** 

**==> picture [215 x 128] intentionally omitted <==**

**1 -** Max. permitted coil voltage. 

**2 -** Min. pick-up voltage with coil at ambient temperature. 

**10** 

**48 SERIES** 

## **Combinations** 

**==> picture [416 x 129] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Code|Type of socket|Type of relay|Module|Retaining clip|
|48.12|95.05.7|50.12|—|095.71|
|48.31|95.03|40.31|99.02|095.01|
|ee|
|4|2|95.05|40.52|99.02|095.01|
|ee es|
|48.61|95.05|40.61|99.02|095.01|
|eees|
|48.62|95.05|44.62|99.02|095.01|
|eeee|
|48.P3|95.P3|40.31|99.02|095.91.3|
|es|
|48.P5|95.P5|40.52|99.02|095.91.3|
|ee|
|48.P6|95.P5|40.61|99.02|095.91.3|
|ee|es es|
|48.P8|95.P5|44.62|99.02|095.91.3|
|ee|

**----- End of picture text -----**<br>


**B** 

## **O line awing** 

**==> picture [395 x 179] intentionally omitted <==**

**----- Start of picture text -----**<br>
64.5<br>15.8 25.9 17.5 17.5<br>_<br>| L_<br>=<br>32<br>48.31  48.52 / 48.61 / 48.62 48.12<br>Screw terminal Screw terminal<br>21.6<br>78.6 35.4<br>25.5<br>**----- End of picture text -----**<br>


**==> picture [245 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
48.P3  48.P5  48.P6  48.P8<br>Push-in terminal<br>**----- End of picture text -----**<br>


**11** 

**48 SERIES** 

**==> picture [492 x 516] intentionally omitted <==**

**----- Start of picture text -----**<br>
Accessories<br>8-way jumper link  for type 48.P3/P5/P6/P8 097.58<br>Rated values 10 A - 250 V<br>B 097.58 cS)© ifaLE15.8 : :LLee: . : dss<br>2-way jumper link  for type 48.P3/P5/P6/P8 097.52<br>Rated values 10 A - 250 V<br>097.52<br>ff ‘ r y<br>ro y<br>vt,<br>a<br>2-way jumper link  for type 48.P3/P5/P6/P8 097.42<br>Rated values 10 A - 250 V<br>f 2 46<br>097.42<br>©<br>ise)<br>_ [e)<br>7 . 7<br>> Marker tag holder 58 44  for type 48.P3/P5/P6/P8 and 48.12/31/52/61/62 097.00<br>097.00<br>ay<br>8-way jumper link  for screw terminal version 095.18 (blue) 095.18.0 (black)<br>Rated values 10 A - 250 V<br>095.18<br>15 15.8 15.8 15.8 15.8 15.8 15 S<br>Sheet of marker tags (CEMBRE Thermal transfer printers) , plastic,<br>060.48<br>48 tags, 6 x 12 mm<br>EREEE:)<br>060.48<br>P E A<br>P A T E N T<br>RO N<br>U<br>E E<br>U<br>NA E POR<br>**----- End of picture text -----**<br>


**==> picture [90 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
Packaging codes<br>**----- End of picture text -----**<br>


**How to code and identify retaining clip and packaging options for sockets.** 

Example: 

**==> picture [461 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
4 8 . P 5 . 7 . 0 2 4 . 0 0 5 0 S P A<br>A  Standard packaging<br>B  Blister packaging<br>SP  Plastic retaining clip<br>**----- End of picture text -----**<br>


**12** 

Please see general technical information
Updated at June 10, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →