45.71.7.012.1310

Power Relay, Miniature, SPST-NO, 12 VDC, 16 A, 45 Series, Through Hole, DC Sensitive

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: FINDER
Product type: Power Relays
SVHC: No SVHC (04-Feb-2026)
Coil Type: DC Sensitive
Coil Voltage: 12VDC
Product Range: 45 Series
Relay Mounting: Through Hole
Coil Resistance: 400ohm
Contact Current: 16A
Relay Terminals: PC Pin
Contact Material: Silver Nickel
Contact Voltage VAC: 250V
Contact Voltage VDC: -
Contact Configuration: SPST-NO
Delivery and price
Units per pack	50
Price	4.75 €
Current stock	10+
Lead time	30 days
Datasheet
45 SЕRIES 

Miniature PCB Relays + Faston 250 10 - 16 A 

Burners, boilers and furnaces 

Jacuzzis and hot tubs 

Infrared and microwave ovens 

Film projectors 

Electronic circuit boards 

Control and management of electric power 

Inverter 

Charging Stations 

Prices, features, specifications, capabilities, appearance and availability of our products and services are subject to change without notice. FINDER assumes no responsibility for the presence of possible errors or insufficient information in this document. In case of discrepancies between the printed and online versions, the latter prevails. 

45 SERIES © ~~fi~~ nder pe 

A 

**Relay for +105 °C ambient use PCB mount - high contact gap for photovoltaic inverters and charging station PCB mount** 

## **45.31…x310 45.31…4310** 

## **45.31…0610** 

**-  45.31…x310, 1 Pole normally open** 

**(≥ 3 mm contact gap)** 

- **45.31…4310, Conform to Annex CC EN 61439-7:2018 for ev charging station** 

- **45.31…0610, 1 Pole normally open** 

**(≥ 3.6 mm contact gap)** 

- Contact gap ≥ 3 mm or ≥ 3.6 mm according to EN 60730-1 

- Sensitive DC coil - 360 mW (45.31…x310 type) 

- Cadmium Free contact material 

- Reinforced insulation between coil and contacts according to EN 60335-1, EN 50178, EN 60204 with safe separation and 8 mm clearance and creepage distance 

- 1 NO (SPST-NO), ≥ 3 mm gap 

- Max ambient temperature +105 °C 

- PCB mounting 

- 1 NO (SPST-NO), ≥ 3 mm gap 

- Conform to Annex CC EN 61439-7:2018 for ev charging station 

- Max ambient temperature +105 °C 

- PCB mounting 

   - 1 NO (SPST-NO), ≥ 3.6 mm gap 

   - Max ambient temperature +105 °C 

   - PCB mounting 

- 6 kV (1.2/50 µs) isolation, coil-contacts 

- Flux proof: RT II 

|**Relay for +105 °C ambient use**<br>**PCB mount - high contact gap for photovoltaic**<br>**inverters and charging station**<br>**PCB mount**<br>**-  45.31…x310, 1 Pole normally open**<br>**(≥ 3 mm contact gap)**<br>**-  45.31…4310, Conform to Annex CC**<br>**EN 61439-7:2018 for ev charging station**<br>**-  45.31…0610, 1 Pole normally open**<br>**(≥ 3.6 mm contact gap)**<br>• Contact gap ≥ 3 mm or ≥ 3.6 mm according toContact gap ≥ 3 mm or ≥ 3.6 mm according to<br>EN 60730-1<br>• Sensitive DC coil - 360 mW (45.31…x310 type)Sensitive DC coil - 360 mW (45.31…x310 type)<br>• Cadmium Free contact materialCadmium Free contact material<br>• Reinforced insulation between coil andReinforced insulation between coil and<br>contacts according to EN 60335-1, EN 50178,<br>EN 60204 with safe separation and 8 mm<br>clearance and creepage distance<br>• 6 kV (1.2/50 µs) isolation, coil-contacts6 kV (1.2/50 µs) isolation, coil-contacts<br>• Flux proof: RT IIFlux proof: RT II<br>_For ULratings see:_<br>_“General technical information” page_V<br>For outline drawing see page 7<br>**Contact specification**<br>Contact configuration|**45.31…x310**<br>• 1 NO (SPST-NO), ≥ 3 mm gap1 NO (SPST-NO), ≥ 3 mm gap<br>• Max ambient temperatureMax ambient temperature<br>+105 °C<br>• PCB mountingPCB mounting<br>ee<br>Boece<br>es)|**45.31…4310**<br>• 1 NO (SPST-NO), ≥ 3 mm gap1 NO (SPST-NO), ≥ 3 mm gap<br>• Conform to Annex CCConform to Annex CC<br>EN 61439-7:2018 for ev<br>charging station<br>• Max ambient temperatureMax ambient temperature<br>+105 °C<br>• PCB mountingPCB mountingg<br>—><br>Ste<br>Ss|**45.31…0610**<br>• 1 NO (SPST-NO), ≥ 3.6 mm gap1 NO (SPST-NO), ≥ 3.6 mm gap<br>• Max ambient temperatureMax ambient temperature<br>+105 °C<br>• PCB mountingPCB mounting<br>On.<br>Syria<br>SS|
|---|---|---|---|
||45.31…x310<br>(1 NO/SPST-NO)<br>Copper side view<br>1NO (SPST-NO) ≥ 3 mmgap<br>mM<br>14<br>pee eee n eee<br>eny<br>'<br>and)<br>i~~r~~ Co<br>R2<br>"1<br>31.4<br>15<br>ign,<br>ot|45.31…4310<br>(1 NO)<br>Copper side view<br>1NO (SPST-NO) ≥ 3 mmgap<br>mM<br>14<br>pene een een<br>ny<br>1<br>_<br>i~~r~~ Co<br>h2<br>"1<br>31.4<br>15<br>ign,<br>Ot|45.31…0610<br>(1 NO/SPST-NO)<br>Copper side view<br>1NO (SPST-NO) ≥ 3.6 mmgap<br>mM<br>14<br>pawn eee nee e ey<br>1<br>_—}<br>i~~r~~ Fo<br>h2<br>TT<br>31.4<br>15<br>ie,<br>Ot|
|Rated current/Maximumpeak current (@105°C) A|16/30|16/80|10/30|
|Maximum switching current/Maximum peak<br>current(@85°C)<br>A|—|20/80|—|
|Rated voltage/<br>Maximum switchingvoltage<br>V AC|250/400|250/400|500/500|
|Rated load AC1<br>VA|4000|4000|5000|
|Peak current conform to Annex CC EN 61439-7:2018 A|—|230 (70μs)|—|
|Peak current conform to IEC60669-2-1 A2:2015 A|—|120 (600μs)|—|
|LED lamps rating(230 V)<br>W|—|125|—|
|Rated load AC15 (230 V AC)<br>VA|750|—|750|
|Singlephase motor rating(230 V AC)<br>kW|0.55|—|0.55|
|BreakingcapacityDC1: 24/110/220 V<br>A|16/4/1|16/4/1|10/4/1|
|Minimum switchingload<br>mW (V/mA)|500 (10/5)|500 (10/5)|500 (10/5)|
|Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)<br>V AC (50/60 Hz)<br>V DC|AgNi<br>—|AgSnO2<br>—|AgNi<br>—|
||6 - 12 - 24 - 48 - 60|6 - 12 - 24 - 48 - 60|6 - 12 - 24 - 48 - 60|
|Ratedpower AC/DC<br>VA (50 Hz)/W|—/0.36|—/0.36|—/0.55|
|Operating range<br>AC<br>DC|—|—|—|
||(0.7…1.2)UN|(0.7…1.2)UN|(0.8…1.2)UN|
|Holdingvoltage<br>AC/DC|—/0.4 UN|—/0.4 UN|—/0.4 UN|
|Must drop-out voltage<br>AC/DC<br>**Technical data**<br>Mechanical life AC/DC<br>cycles|—/0.1 UN<br>—/10 · 106|—/0.1 UN<br>—/10 · 106|—/0.1 UN<br>—/2 · 106|
|Electrical life at rated load AC1<br>cycles|30 · 103|20 · 103|10 · 103|
|Operate/release time<br>ms|12/2|12/2|12/2|
|Insulation between coil<br>and contacts(1.2/50µs)<br>kV|6(8 mm)|6(8 mm)|6(8 mm)|
|Dielectric strength<br>between open contacts<br>V AC|2500|2500|3000|
|Ambient temperature range<br>°C|–40…+105|–40…+105|–40…+105|
|Environmentalprotection<br>**Approvals**(according to type)|RT II<br>®<br>EAL<&e>SANs|RT II<br>®<br>EALKsSANs|RT II<br>®<br>EAL<&e>SANs|



**3** 

45 SERIES 

## **Relays for +125 °C ambient use PCB mount - Faston 250 contact connections** 

**==> picture [26 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
45.71<br>**----- End of picture text -----**<br>


**==> picture [26 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
45.91<br>**----- End of picture text -----**<br>


## **-  45.71, 1 Pole normally open or normally** A **closed** 

## **-  45.91, 1 Pole normally open** 

- **(≥ 3 mm contact gap)** 

- Contact gap ≥ 3 mm according to EN 60730-1 (45.91 type) 

- Sensitive DC coil - 360 mW 

- Cadmium Free option available 

- Reinforced insulation between coil and contacts according to EN 60335-1, EN 50178, EN 60204 with safe separation and 8 mm clearance and creepage distance 

- 6 kV (1.2/50 µs) isolation, coil-contacts 

- Flux proof: RT II standard, (RT III option) 

   - 1 NO (SPST-NO), 

- 1 NO or 1 NC 

- (SPST-NO or SPST-NC) ≥ 3 mm gap 

- Max ambient temperature • Max ambient temperature +125 °C +125 °C 

- PCB mounting + Faston 250 

- PCB mounting + Faston 250 

|**Relays for +125 °C ambient use**<br>**PCB mount - Faston 250 contact connections**<br>**-  45.71, 1 Pole normally open or normally**<br>**closed**<br>**-  45.91, 1 Pole normally open**<br>**(≥ 3 mm contact gap)**<br>• Contact gap ≥ 3 mm according to EN 60730-1Contact gap ≥ 3 mm according to EN 60730-1<br>(45.91 type)<br>• Sensitive DC coil - 360 mWSensitive DC coil - 360 mW<br>• Cadmium Free option availableCadmium Free option available<br>• Reinforced insulation between coil andReinforced insulation between coil and<br>contacts according to EN 60335-1, EN 50178,<br>EN 60204 with safe separation and 8 mm<br>clearance and creepage distance<br>• 6 kV (1.2/50 µs) isolation, coil-contacts6 kV (1.2/50 µs) isolation, coil-contacts<br>• Flux proof: RT II standard, (RT III option)Flux proof: RT II standard, (RT III option)<br>_For ULratings see:_<br>_“General technical information” page_V<br>For outline drawing see page 7<br>**Contact specification**<br>Contact configuration|**45.71**<br>• 1 NO or 1 NC1 NO or 1 NC<br>(SPST-NO or SPST-NC)<br>• Max ambient temperatureMax ambient temperature<br>+125 °C<br>• PCB mounting + Faston 250PCB mounting + Faston 250<br>oF<br>es|**45.91**<br>• 1 NO (SPST-NO),1 NO (SPST-NO),<br>≥ 3 mm gap<br>• Max ambient temperatureMax ambient temperature<br>+125 °C<br>• PCB mounting + Faston 250PCB mounting + Faston 250<br>;<br>e|<br>3|
|---|---|---|
||45.71…0310<br>(1 NO)/(SPST-NO)<br>45.71…0410<br>(1 NC)/(SPST-NC)<br>Copper side view<br>1NO or 1NC (SPST-NO or SPST-NC)<br>Mo.<br>14<br>'<br>1<br>ROOM<br>Me<br>12<br>wo<br>ah<br>31.4<br>is ~~a~~e oo<br>**a**r] ~~s~~<br>5~~.~~|45.91…0310<br>(1 NO/SPST-NO)<br>Copper side view<br>1NO (SPST-NO) ≥ 3 mmgap<br>At<br>14<br>~~S~~e<br>tot Le<br>A2<br>1<br>ae<br>1~~5~~<br>~~ey~~<br>gtk<br>: es|
|Rated current/Maximumpeak current<br>A|16/30<br>~~ee~~|16/30<br>~~ee~~|
|Rated voltage/<br>Maximum switchingvoltage<br>V AC|250/400|250/400|
|Rated load AC1<br>VA|4000<br>~~ee~~|4000<br>~~ee~~|
|Rated load AC15 (230 V AC)<br>VA|750<br>~~ee~~<br>~~ee~~<br>~~ee~~|750<br>~~ee~~<br>~~ee~~<br>~~ee~~|
|Singlephase motor rating(230 V AC)<br>kW|0.55<br>~~ee~~|0.55<br>~~ee~~|
|BreakingcapacityDC1: 24/110/220 V<br>A|16/0.3/0.13<br>~~ee~~<br>~~ee~~|16/4/1<br>~~ee~~<br>~~ee~~|
|Minimum switchingload<br>mW (V/mA)|500 (10/5)<br>~~ee~~|500 (10/5)<br>~~ee~~|
|Standard contact material<br>**Coil specification**<br>Nominal voltage (UN)<br>V AC (50/60 Hz)<br>V DC|AgCdO<br>—<br>~~ee~~|AgNi<br>—<br>~~ee~~|
||6 - 12 - 24 - 48 - 60<br>~~ee~~|6 - 12 - 24 - 48 - 60<br>~~ee~~|
|Ratedpower AC/DC<br>VA (50 Hz)/W|—/0.36<br>~~ee~~<br>~~ee~~|—/0.36<br>~~ee~~<br>~~ee~~|
|Operating range<br>AC<br>DC|—<br>~~ee~~|—<br>~~ee~~|
||(0.7…1.2)UN<br>~~ee~~|(0.7…1.2)UN<br>~~ee~~|
|Holdingvoltage<br>AC/DC|—/0.4 UN<br>~~ee~~|—/0.4 UN<br>~~ee~~|
|Must drop-out voltage<br>AC/DC<br>**Technical data**<br>Mechanical life AC/DC<br>cycles|—/0.1 UN<br>—/10 · 106<br>~~ee~~|—/0.1 UN<br>—/10 · 106<br>~~ee~~|
|Electrical life at rated load AC1<br>cycles|100 · 103<br>~~ee~~|30 · 103<br>~~ee~~|
|Operate/release time<br>ms|10/2<br>~~es~~|12/2<br>~~es~~|
|Insulation between coil<br>and contacts(1.2/50µs)<br>kV|6(8 mm)|6(8 mm)|
|Dielectric strength<br>between open contacts<br>V AC|1000<br>~~ee~~|2500<br>~~ee~~|
|Ambient temperature range<br>°C|–40…+125<br>~~ee~~|–40…+125<br>~~ee~~|
|Environmentalprotection<br>**Approvals**(according to type)|RT II<br>~~ee~~<br>~~es~~<br>EAL<<Ke>SANs|RT II<br>~~ee~~<br>~~es~~<br>FAL<<CANus|



**4** 

45 SERIES 

A 

## **Ordering information** 

Example:  45 series for PCB relay + Faston 250, 1 NO (SPST-NO), 12 V DC coil. 

## **A B C D 4 5 . 7 1 . 7 . 0 1 2 . 0 3 1 0** 

## **Series** 

## **Type** 

- 3 =  PCB mount, ≥ 3 mm or ≥ 3.6 mm contact gap 

- 7 =  PCB + Faston 250 mount 

- 9 =  PCB + Faston 250 mount, ≥ 3 mm 

## **A: Contact material** 

- 0 =  Standard AgCdO for 45.71, Standard AgNi 

   - for 45.31 and 45.91 

- 1 =  AgNi 

- 2 =  AgCdO 

## **D: Special versions** 

- 0 =  Flux proof (RT II) 

- 1 =  Wash tight (RT III) 45.71 and 45.91 only 

## **C: Options** 

   - 1 =  None 

- 4 =  AgSnO2 for 45.31 

## **No. of poles** 

- 1 =  1 pole, 16 A 

## **B: Contact circuit** 

- 3 =  NO (SPST) 

## **Coil version** 

- 7 =  Sensitive DC 

   - 4 =  NC (SPST) 45.71 only 

   - 6 = NO (SPST), ≥ 3.6 mm 

- 9 = Standard DC (45.31…0610 only) 

## **Coil voltage** 

See coil specifications 

## **Selecting features and options: only combinations in the same row are possible.** 

|**Type**|**Coil version**|**A**|**B**|**C**|**D**|
|---|---|---|---|---|---|
|45.31|sensitive DC|0 - 2 - 4|3|1|0|
||standard DC|0|6|1|0|
|45.71|sensitive DC|0 - 1|3 - 4|1|0 - 1|
|45.91|sensitive DC|0 - 2|3|1|0 - 1|



## **Technical data** 

## **Insulation according to EN 61810-1** 

|||**45.71**|**45.71**|**45.31 / 45.91**|**45.31 / 45.91**|
|---|---|---|---|---|---|
|Nominal voltage of supply system<br>V AC||230/400||230/400||
|Rated insulation voltage<br>V AC||250|400|250|400|
|Pollution degree||3|2|3|2|
|**Insulation between coil and contact set**||||||
|Type of insulation||Reinforced (8 mm)||Reinforced (8 mm)||
|Overvoltage category||III||III||
|Rated impulse voltage<br>kV (1.2/50 µs)||6||6||
|Dielectric strength<br>V AC||4000||4000||
|**Insulation between open contacts**||||||
|Type of disconnection||Micro-disconnection||Full-disconnection||
|Overvoltage category||—||III||
|Rated impulse voltage<br>kV (1.2/50 µs)||—||4||
|Dielectric strength<br>V AC/kV (1.2/50 µs)||1000/1.5||2500/4||
|**Insulation between coil terminals**||||||
|Rated impulse voltage (surge) differential mode<br>(according to EN 61000-4-5)<br>kV (1.2/50 µs)||2||||
|**Other data**||**45.71**||**45.31 / 45.91**||
|Bounce time: NO/NC<br>ms||3/3||2/—||
|Vibration resistance (10…150)Hz: NO/NC<br>g||20/10||20/—||
|Shock resistance|g|20||||
|Power lost to the environment|without contact current<br>W|0.4||||
||with rated current<br>W|1.8||||
|Recommended distance between relays mounted on PCB<br>mm||≥ 5||||



**5** 

45 SERIES 

## **Contact specification** 

A 

**F 45 -  Electrical life (AC) v contact current** Type 45.71 

**==> picture [214 x 109] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cosφ = 1<br>Inductive load - cosφ = 0.4<br>Cycles<br>**----- End of picture text -----**<br>


**F 45 -  Electrical life (AC) v contact current** Type 45.31/45.91 

**==> picture [214 x 103] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cosφ = 1<br>Cycles<br>**----- End of picture text -----**<br>


## **F 45 -  Electrical life (AC) v contact current** 

Type 45.31…4310 

**==> picture [221 x 118] intentionally omitted <==**

**----- Start of picture text -----**<br>
Resistive load - cosφ = 1<br>5 10 15 20<br>Cycles<br>**----- End of picture text -----**<br>


## **H 45 - Maximum DC1 breaking capacity** 

**==> picture [215 x 124] intentionally omitted <==**

**----- Start of picture text -----**<br>
DC voltage (V)<br>DC breaking current (A)<br>**----- End of picture text -----**<br>


- When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 100 · 10[3] cycles (45.71) and ≥ 30 · 10[3 ] cycles (45.31, 45.91) can be expected. 

- In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. 

**6** 

45 SERIES 

## **Coil specifications** 

|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|<br>**DC coil data - 0.36 W sensitive**<br>Nominal<br>voltage<br>Coil<br>code<br>Operating range<br>Resistance<br>Rated coil<br>consumption<br>UN<br>Umin<br>Umax<br>R<br>Iat UN|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Nominal<br>voltage<br>UN|Coil<br>code|Operating range<br>Umin<br>Umax||Resistance<br>R|Rated coil<br>consumption<br>Iat UN||Nominal<br>voltage<br>UN|Coil<br>code|Operating range<br>Umin<br>Umax||Resistance<br>R|Rated coil<br>consumption<br>Iat UN|
|V||V|V|Ω|mA||V||V|V|Ω|mA|
|6|**7**.006|4.2|7.2|100|60||6|**9**.006|4.2|7.2|72|83|
|12|**7**.012|8.4|14.4|400|30||12|**9**.012|8.4|14.4|300|40|
|24|**7**.024|16.8|28.8|1600|15||24|**9**.024|16.8|28.8|1150|21|
|48|**7**.048|33.6|57.6|6400|7.5||48|**9**.048|33.6|57.6|4400|11|
|60|**7**.060|42|72|10000|6||60|**9**.060|42|72|7200|8.3|



## **R 45 - DC coil operating range v ambient temperature** 

**==> picture [190 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
limit for 45.31<br>**----- End of picture text -----**<br>


**1 -** Max. permitted coil voltage. **2 -** Min. pick-up voltage with coil at ambient temperature. 

## **Outline drawings** 

**==> picture [305 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type 45.31 Types 45.71/91<br>**----- End of picture text -----**<br>


**==> picture [101 x 90] intentionally omitted <==**

Please see general technical information 

**7**
Updated at June 7, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →