2600130084

## **Dimensions: [mm]** 

**==> picture [731 x 517] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting: Electrical Properties:<br>Properties Test conditions Value Unit Tol.<br>Frequency Range Min 700-2700 MHz<br>& Max<br>21,0 ±2,0 6,0 ±1,0<br>VSWR 1 806-1000 MHz, free space 3.5 typ.<br>VSWR 2 1600-1900 MHz, free space 3 typ.<br>~ a<br>Impedance Z 50 Ω typ.<br>e a Input Power PIn 5 W max.<br>L ee<br>Peak Gain 1 Gpeak,1 800-1000 MHz, free space 3.3 dBi max.<br>; ee Peak Gain Gpeak,2 1600-1900 MHz, free space 6 dBi max.<br>u ee<br>Polarization Linear<br>. ee<br>Certification:<br>RoHS Approval Compliant [2011/65/EU&2015/863]<br>REACh Approval Conform or declared [(EC)1907/2006]<br>Halogen Free Conform [IEC 61249-2-21]<br>CE Conform [2011/65/EU&2015/863]<br>UKCA Conform [SI 2012/3032]<br>General Information:<br>Antenna Connector Type ANTConn SMA male<br>i f L a L o<br>Mounting Type Connector mount<br>Operating Temperature -40 up to +85 °C<br>O 13,0<br>37,0 ±2,0 Storage Conditions (for single -40 up to +85 °C<br>parts)<br>Color Black<br><><br>Scale - 1:2<br>CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION<br>METHOD<br>RaSi 001.001 2023-06-23 DIN ISO 2768-1m<br>“ox CCITT DESCRIPTION  Tee<br> WIRL-ACCE HATI-I LTE ANTENNA<br>Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions ORDER CODE<br>Max-Eyth-Str. 174638 Waldenburg 2600130084<br>Germany<br>Tel. +49 (0) 79 42 945 - 0 BUSINESS UNIT STATUS PAGE<br>www.we-online.com<br>eiSos@we-online.com eiSmart Valid 1/7<br>90°<br>±3,0<br>157,0<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Typical Return Loss:** 

## **Average Gain:** 

**==> picture [790 x 493] intentionally omitted <==**

**----- Start of picture text -----**<br>
0 6<br>mittee tae} iby edd. sORHEE EEE EEE EEEEE<br>FAECES FCEECECEEEeeee ELENA EET<br>5<br>\ EEEEEEE SSSooeeeeeree/|Sesser va<br>-5<br>IN Mh aA Seceereceees||| | ee A<br>A 0s, 0rvi tee<br>WE LY, =~ dl Ww ] |<br>A fe SSSSSSSSeeee<br>4<br>WPI WP|  RA| eee)es | eeRade e nsPYee e layeee<br>-10<br>PW Saveseveeres<br>22 | sveera cert<br>0SSSeee 2 | Seeeeeeeees<br>3<br>EHESEE SEE HEECEASE<br>EA ee |Ce|| b e een |seee<br>-15<br>SEEUBEEEEOEEseereeeeeren) (i feeeeranes 2 of eteeee'iAh | Seereersereee<br>|) SEEEEEEEEE FHI EEE EEEEEE<br>ERE Ee ee 0 | ee<br>-20<br>EECEEEEE EH 1 eeoi] te e eers Seeeetseeareeesoe<br>SaeeSseeUSneU6) BUSEEESEEE ae, eeeeeceeeeeeenenee<br>Be EOCENEIN OO NFOOEE<br>-25 PE t_ ETE ETE EEE EE EEE EEL ET ELT ES 0 PE EET INVME ET EE EEE E FTE FE TT<br>0,7 1,1 1,5 1,9 2,3 2,7 0,7 1,1 1,5 1,9 2,3 2,7<br>Frequency [GHz] Frequency [GHz]<br>S11 Gain<br>CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION<br>METHOD<br>RaSi 001.001 2023-06-23 DIN ISO 2768-1m<br>SUK ee =O<br>DESCRIPTION<br>-= cate<br> WIRL-ACCE HATI-I LTE ANTENNA<br>Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions ORDER CODE<br>Max-Eyth-Str. 174638 Waldenburg 2600130084<br>Germany<br>Tel. +49 (0) 79 42 945 - 0 BUSINESS UNIT STATUS PAGE<br>www.we-online.com<br>eiSos@we-online.com eiSmart Valid 2/7<br>we a<br>Return Loss [dB] Gain [dBi]<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

**E-plane @ 897,5 MHz [dBi]:** 

**E-plane cut scanning direction:** 

**==> picture [746 x 486] intentionally omitted <==**

**----- Start of picture text -----**<br>
0°<br>— Horizontal<br>5<br>— Vertical<br>-3<br>-11<br>90°<br>a“ od -19<br>0°<br>-27<br>/ ~~ - \<br>/ 7<br>90° -35 270°<br>180°<br>270°<br>180°<br>CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION<br>METHOD<br>RaSi 001.001 2023-06-23 DIN ISO 2768-1m<br>UK ce ee DESCRIPTION =<br> WIRL-ACCE HATI-I LTE ANTENNA<br>Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions ORDER CODE<br>ELEKTRONIK Max-Eyth-Str. 174638 Waldenburg 2600130084<br>MORE THAN GermanyTel. +49 (0) 79 42 945 - 0 BUSINESS UNIT STATUS PAGE<br>www.we-online.com<br>eiSos@we-online.com eiSmart Valid 3/7<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

**E-plane @ 1747,5 MHz [dBi]:** 

**H-plane cut scanning direction:** 

**==> picture [784 x 486] intentionally omitted <==**

**----- Start of picture text -----**<br>
0°<br>Ye Horizontal<br>6<br>Ye Vertical 0°<br>-2<br>-10<br>-18<br>-26<br>90°<br>90° -34 270°<br>270°<br>180°<br>180°<br>CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION<br>METHOD<br>RaSi 001.001 2023-06-23 DIN ISO 2768-1m<br>DESCRIPTION<br>UK  ce a<br> WIRL-ACCE HATI-I LTE ANTENNA<br>Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions ORDER CODE<br>Max-Eyth-Str. 174638 Waldenburg 2600130084<br>Germany<br>Tel. +49 (0) 79 42 945 - 0 BUSINESS UNIT STATUS PAGE<br>www.we-online.com<br>eiSos@we-online.com eiSmart Valid 4/7<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

**H-plane @ 897,5 MHz [dBi]:** 

**H-plane @ 1747,5 MHz [dBi]:** 

**==> picture [797 x 486] intentionally omitted <==**

**----- Start of picture text -----**<br>
0° 0°<br>Ye Horizontal Le Horizontal<br>5 6<br>Vertical Vertical<br>-3 -0,4<br>-11 -6,8<br>-19 -13,2<br>-27 -19,6<br>90° -35 270° 90° -26 270°<br>180° 180°<br>CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION<br>METHOD<br>RaSi 001.001 2023-06-23 DIN ISO 2768-1m<br>DESCRIPTION<br>UK  ce a<br> WIRL-ACCE HATI-I LTE ANTENNA<br>Würth Elektronik eiSos GmbH & Co. KG<br>EMC & Inductive Solutions ORDER CODE<br>Max-Eyth-Str. 174638 Waldenburg 2600130084<br>Germany<br>Tel. +49 (0) 79 42 945 - 0 BUSINESS UNIT STATUS PAGE<br>www.we-online.com<br>eiSos@we-online.com eiSmart Valid 5/7<br>**----- End of picture text -----**<br>


This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Cautions and Warnings:** 

## **The following conditions apply to all goods within the product series of wireless connectivity of Würth Elektronik eiSos GmbH & Co. KG:** 

## **General:** 

- Conformal coating may affect the product performance. 

## **Storage Conditions:** 

   - A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment. 

   - Do not expose the components to direct sunlight. 

- This electronic component is designed and manufactured for use in general electronic equipment. 

- Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury. 

- Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. 

- The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved. 

- The storage conditions in the original packaging are defined according to DIN EN 61760-2. 

- For a moisture sensitive component, the storage condition in the original packaging is defined according to IPC/JEDEC-J-STD-033. It is also recommended to return the component to the original moisture proof bag and reseal the moisture proof bag again. 

- ESD prevention methods need to be followed for manual handling and processing by machinery. 

- The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Packaging: 

## **Packaging:** 

- Do not drop or impact the components, the component may be damaged 

- Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time. 

- The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products. 

- The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. 

## **Handling:** 

- Violation of the technical product specifications such as exceeding the nominal rated current, will void the warranty. 

## **Product specific:** 

## **Soldering:** 

   - Violation of the technical product specifications such as but not limited to exceeding the absolute maximum ratings will void the conformance to regulatory requirements. 

   - The edge castellation is designed and made for prototyping, i.e. hand soldering purposes only. 

   - Non-antenna modules must be equipped with a proper antenna having specific characteristics. 

- The solder profile must comply with the technical product specifications. All other profiles will void the warranty. 

- All other soldering methods are at the customers’ own risk. 

## **Cleaning and Washing:** 

- Washing agents used during the production to clean the customer application might damage or change the characteristics of the component. Washing agents may have a negative effect on the long-term functionality of the product. 

- Using a brush during the cleaning process may break the module. Therefore, we do not recommend using a brush during the PCB cleaning process. 

- The  applicable country regulations and specific environmental regulations must be observed. 

- Do not disassemble the product. Evidence of tampering will void the warranty. 

- The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum temperature specified. 

These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. However, no responsibility is assumed for inaccuracies or incompleteness. 

All topics are described in a more detailed manner in the manual for each product. 

## **Potting and Coating:** 

- If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the component. Expansion could damage components. We recommend a manual inspection after potting to avoid these effects 

CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD RaSi 001.001 2023-06-23 DIN ISO 2768-1m ~~|~~ DESCRIPTION ~~| | eS~~ **WIRL-ACCE HATI-I LTE ANTENNA** Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions ORDER CODE Max-Eyth-Str. 174638 Waldenburg **2600130084** Germany Tel. +49 (0) 79 42 945 - 0 ~~ee~~ BUSINESS UNIT STATUS ~~eee~~ PAGE www.we-online.com eiSos@we-online.com eiSmart Valid 6/7 

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH 

& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

## **Important Notes** 

## **The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:** 

## **1. General Customer Responsibility** 

Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not. 

## **2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications** 

## **6. Product Life Cycle** 

Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 

## **7. Property Rights** 

All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. 

It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 

## **8. General Terms and Conditions** 

Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at www.we-online.com. 

## **3. Best Care and Attention** 

Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 

## **4. Customer Support for Product Specifications** 

Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 

## **5. Product R&D** 

Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. 

CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD RaSi 001.001 2023-06-23 DIN ISO 2768-1m ~~|~~ DESCRIPTION ~~| | eS~~ **WIRL-ACCE HATI-I LTE ANTENNA** Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions ORDER CODE Max-Eyth-Str. 174638 Waldenburg **2600130084** Germany Tel. +49 (0) 79 42 945 - 0 ~~ee~~ BUSINESS UNIT STATUS ~~eee~~ PAGE www.we-online.com eiSos@we-online.com eiSmart Valid 7/7 

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 

**WIRELESS CONNECTIVITY & SENSORS** ~~ooo~~ **EU Declaration of Conformity** 

## **EU DECLARATION OF CONFORMITY** 

**Antenna: 2600130084** 

**The manufacturer:** Würth Elektronik eiSos GmbH & Co. KG Max-Eyth-Straße 1 74638 Waldenburg 

This declaration of conformity is issued under the sole responsibility of the manufacturer. 

## **Object of the declaration: 2600130084** 

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation directive 2011/65/EU with its amending Annex II EU 2015/863. 

Trier, 29th of June 2022 Place and date of issue 

July 2022 

_www.we-online.com/wcs_ 

**WIRELESS CONNECTIVITY & SENSORS** ~~ooo~~ **UK Declaration of Conformity** 

## **DECLARATION OF CONFORMITY** 

**Product:** 806-1000 / 1600-1900 MHz antenna for cellular applications **Model/type:** 2600130084 **The manufacturer:** Würth Elektronik eiSos GmbH & Co. KG Max-Eyth-Straße 1 74638 Waldenburg Germany **The importer:** Wurth Electronics UK Limited 8 The Vic, MediacityUK M50 3SP Manchester United Kingdom 

This declaration of conformity is issued under the sole responsibility of the manufacturer. 

## **Object of the declaration: 2600130084** 

The object of the declaration described above is in conformity with the relevant UK Statutory Instrument: The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (S.I. 2012 No.3032) . 

References to the relevant designated standards used or references to the other technical specifications in relation to which conformity is declared: 

## EN IEC 63000:2018 

Gudrun Eckhardt, Teamleader Hardware Development, Trier, 25th of May 2023 Name, Function, Place and date of issue 

June 2023 

_www.we-online.com/wcs_