2195764-1

## **1570-1615 MHz GNSS ANTENNA, CHIP TYPE** Standard Antenna Solutions 

Part Number: 2195764-1 

## **PRODUCT FACTS:** 

- Embedded ceramic chip antenna 

## TEST ORIENTATION 

## IN FREE SPACE: 

## VSWR: 

- SMT assembly 

- Available in tap & reel 

- RoHS compliant 

## **RECOMMENDATIONS:** 

- Minimum or no matching circuits required 

- Bandwidth and performance is dependent on ground plane size. Evaluation board size is 80mm x 40mm 

**==> picture [47 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
AZIMUTH:<br>**----- End of picture text -----**<br>


**==> picture [57 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
ELEVATION:<br>**----- End of picture text -----**<br>


- PCB ground is to be on top layer 

## **SPECIFICATIONS:** 

- Frequency Range: 1570-1615 MHz 

- Peak Gain:[<] =  3.2 dBi (Max) 

- VSWR: <2.0:1 

- Polarization: Linear 

- Power Handling: 10 Watt cw 

## EFFICIENCY: 

- Feed Point Impedance: 50 ohms 

- Size: 5.2mm x 3.7mm x 0.7mm 

- Mounting: Surface-mount technology 

- Mounting Guide: See diagram on page 2 

- Weight: 0.2 g 

- Operating Temperature: -40° to 105°C 

DATA AND DEVICES /// STANDARD ANTENNA SOLUTIONS: 1570-1615 MHZ GNSS ANTENNA, CHIP TYPE 

**1570-1615 MHz GNSS Antenna, Chip Type** Standard Antenna Solutions 

## MOUNTING GUIDE: 

KEEP OUT AREA: 

DATA AND DEVICES /// STANDARD ANTENNA SOLUTIONS: 1570-1615 MHZ GNSS ANTENNA, CHIP TYPE 

PAGE 2 

**1570-1615 MHz GNSS Antenna, Chip Type** Standard Antenna Solutions 

**==> picture [134 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
APPROXIMATE DIMENSIONS:<br>**----- End of picture text -----**<br>


## TAPING PACKAGE AND LABEL MARKING 

(1) Quantity/reel: 2000pcs/reel 

(2) Carrier tape dimensions 

- (3) Taping reel dimensions 

DATA AND DEVICES /// STANDARD ANTENNA SOLUTIONS: 1570-1615 MHZ GNSS ANTENNA, CHIP TYPE 

PAGE 3 

**1570-1615 MHz GNSS Antenna, Chip Type** Standard Antenna Solutions 

## RECOMMENDED REFLOW SOLDERING 

- (1) Soldering gun procedure 

Note the following, in case of using solder gun for replacement (a) The tip temperature must be less than 350°C for a period within 3 seconds by using soldering gun under 30 W 

   - (b) The soldering gun tip shall not touch this product directly 

- (2) Soldering volume 

Note that excess soldering volume will easily crack the body of this product 

## TE TECHNICAL SUPPORT CENTER 

USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America  +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 For phone numbers in other countries, go to te.com/support-center 

## **te.com** 

TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. 

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 

© 2019 TE Connectivity Ltd. family of companies All Rights Reserved. 

**1-1773970-1 01/19 Original** 

DATA AND DEVICES /// STANDARD ANTENNA SOLUTIONS: 1570-1615 MHZ GNSS ANTENNA, CHIP TYPE