2-1617749-2

CII Mid-Range Relays 

## **FCA-210 Series, 10 Amperes, DPDT** 

The Series FCA-210 relay manufacture other versions **General Specifications** is a polarized single-side of this relay: **Temperature Rating** — ~~‘~~ a flux from a permanentstable design, where the **FCA-410** 4PDT Relay — 10 Ampere -70˚C TO + 125˚C **Altitude** — 300,000 Feet magnet provides the **Shock*** — oar ee the deactivated state, andarmature holding force in **FCA-610** 6 PDT Relay  — 10 Ampere 200 g for 6 mSZ, Y, & X Enclosures — its flux path is switched and **Available:** W & M Enclosures (Stud Mtg.) — i i=. “, combined with the coil flux 100 g for 6 mS in the operated state. **FCA-215** — 15 Ampere **Vibration, Sinusoidal*** — This results in appreciably DPDT Relay, Has the same Z, Y, & X Enclosures — increased contact pressure specifications as the 30 g 33-3000Hz in both states over that of a FCA-210 except is rated at W & M Enclosures (Stud Mtg.) — **Hermetically Sealed** 15 amps. (Commercial Only) 20 g 33-3000Hz spring return nonpolar **All Welded Construction** design.  We also **Vibration, Random*** — 

## **Product Facts** 

n **Hermetically Sealed** 

**Vibration, Random*** — Z, Y, & X Enclosures — 0.4 g[2] /Hz 50-2000Hz W & M Enclosures (Stud Mtg.) — 0.2 g[2] /Hz 50-2000Hz 

- n **All Welded Construction** 

- n **Balanced Force** 

- n **Permanent Magnet Drive** 

- n **Contacts — Silver Cadmium Oxide with Gold Plating** 

**Dielectric Strength** — At Sea Level — 

All circuits to ground and circuit to circuit — 1250 V rms Coil to ground — 1000 V rms At 80,000 Feet — 350 V rms 

- n **Coils for DC, 50 to 400Hz and 400Hz AC** 

## **Contact Rating — Amperes Ratings Are Continuous Duty** 

- n **Weight 1.6 ounces max. (45.4 grams)** 

|**Type of**<br>**Load**<br>Resistive|**Life (Min.)**<br>**Cycles x 103**<br>100|**28 VDC**<br>10|**115VAC**<br>**400Hz**<br>10|**115/200VAC 3Ø**<br>**400Hz**<br>**60Hz***<br>10<br>2.5|**115/200VAC 3Ø**<br>**400Hz**<br>**60Hz***<br>10<br>2.5|
|---|---|---|---|---|---|
|Inductive|20|8|8|8|2.5|
|Motor|100|4|4|4|2.0|
|Lamp|100|2|2|2|1|



**Insulation Resistance** — 

Initial (500 VDC) — 100 MΩ Min. After Life or Environmental Tests — 50 MΩ Min. 

- n **Qualified to M83536/9, /10** 

## **Operate Time at Nominal** 

**Voltage** — 

DC Relays — 10 ms or less AC Relays — 15 ms or less 

*60 Hz loads rated for 10,000 operations 

**Overload Current** — 40 AMPS DC, 60 AMPS 400Hz **Rupture Current** — 50 AMPS DC, 80 AMPS 400Hz **Contact Make Bounce** —1 MILLISECOND AT NOMINAL VOLTAGE **Max. Contact Drop at 10 Amps** — INITIAL 0.100 VOLTS **End of Life** — 0.125 VOLTS 

**Release Time at Nominal** 

**Voltage** — DC Relays — 10 ms or less AC Relays — 50 ms or less 

* Max. contact opening under vibration or shock 10 microseconds 

## **Coil Data** 

|**Coil Data**|||||||
|---|---|---|---|---|---|---|
|**Coil**<br>**Code**|**Nominal**<br>**Voltages**|**Freq.**<br>**Hz**|**DC Res.**<br>**AC Amps (B)**|**Over Tem**<br>**Pickup or**<br>**Below Volts**|**Over Temperature Ran**<br>**Dropout or**<br>**Above Volts**|**erature Range**<br>**Must Hold**<br>**Voltage (C)**|
|1|6|DC|20Ω|4.5|0.3|2.5|
|2|12|DC|80Ω|9.0|0.75|4.5|
|3|28|DC|320Ω|18.0|1.5|7.0|
|4(A)|28|DC|320Ω|18.0|1.5|7.0|
|5|48|DC|920Ω|32.0|2.5|14.0|
|6|28|400Hz|180 mA|22.0|1.25|10.0|
|7|28|50/400Hz|100 mA|22.0|1.25|10.0|
|8|115|400 Hz|40 mA|90.0|5.0|40.0|
|9|115|50/400 Hz|30 mA|95.0|5.0|40.0|



- A.  CODE 4 COILS HAVE BACK EMF SUPPRESSION TO 42 VOLTS MAX. 

- B.  DC COIL RESISTANCE ± 10% AT 25˚C; AC COIL MAX. CURRENT AT NOMINAL VOLTAGE. 

- C.  RELAY WILL STAY IN PICKED-UP STATE DOWN TO MUST HOLD VOLTAGES SHOWN. 

**NOTE:** Only DC Coil Models are 

   - D.  MAX. OVERVOLTAGE: 6 & 12 VDC COILS 120% OF NOMINAL; ALL OTHERS 110% OF NOMINAL. 

- QPL Approved. E.  COILS AVAILABLE FOR OTHER VOLTAGES AND FOR AC 50/60HZ. 

5–12 

Catalog 5-1773450-5 Revised 3-13 

USA: +1 800 522 6752 For additional support numbers Asia Pacific: +86 0 400 820 6015 please visit www.te.com UK: +44 800 267 666 

Dimensions are shown for reference purposes only. Specifications subject to change. 

Dimensions are in millimeters unless otherwise specified. 

www.te.com 

CII Mid-Range Relays 

## **FCA-210 Series, 10 Amperes, DPDT** (Continued) 

Below are shown the standard terminal types and the enclosures available.  Specify the assembly as indicated under How To Order.  Dimensions are shown in inches ± .010 and (Millimeters ± .25). 

## **Terminals** 

**==> picture [46 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Enclosures<br>**----- End of picture text -----**<br>


**==> picture [549 x 608] intentionally omitted <==**

**----- Start of picture text -----**<br>
Socket Pins 115 VAC<br>SOCKET PINS ARE GOLD PLATED CODE  All Enclosures have Cupro-Nickel<br>POLARIZING PINS ARE TIN/LEAD PLATEDCIRCUIT BOARD PINS ARE TIN/LEAD PLATED “D” .050 ± .005 Cans bright acid tin/lead plated after<br>DIMENSIONS EXCEPT AS NOTED: .270 (1.27 ± (13) assembly to terminal headers.<br>INCHES ± .010   (MILLIMETERS ± .25) (6.86) RubberSilicone Dimensions: Inches ± .010 (mm ± .25)<br>CODE  .330 ±.030 4 aoo Gasket “A” AC Coils 1.125 in. (28.57) Max.<br>“A” Socket Pins - All DC Coils (8.83)± (.76) DC Coils 1.010 in. (25.65) Max.<br>.070 (1.78)<br>.050 ± .005 .050 (1.27)<br>.270 (1.27 ± (.127) .115 +.006 CODE<br>(6.86) Silicone - (.010)<br>! RubberGasket (2.92) c +(.152)- (.254) ic -X2 — “Z” “A”<br>.300 Max.<br>(7.62)<br>a WU UU " aeJ o .062 P .027 ±.003 : T ]<br>.062           Dia.- .001+.002 ©, QO (1.57)Dia. (.69)± (.08) 1.025 Max.<br>| -X2 (1.57        ) +.05- .02 PinPolar BLUE BEAD+X1 © © ] ( .062 ± .001 Dia. Pin1.57 ± .02)   \ f o } .525 Max. ee | (26.04)<br>CODE  Socket Pins 28 VAC Coils (13.34)<br>“E” Same as Code “D” Except polarizing<br>Pin turned 90˚ to this plane. CODE<br>©0 QO .062           Dia. Pin±.001 POLARIZING  PIN “Y” To<br>BLUE BEAD ( 1.57         ) ± .02  8 Plcs “A”<br>MAX.<br>CODE<br>“B” .040<br>Circuit Board Pins - All DC Coils .156 1.025 Max. (1.02)<br>.270 CODE “F”   Circuit Board  Pins115 VAC Coils ©6000 4 PLCSFULL R l r (3.96) - (26.04) (36.73)1.446 _. .150<br>(6.86) .270 1.396 (3.8)<br>(6.86) (35.46)<br>.300 .525 Max. .375 5<br>(7.62) .330 ±.030 (13.34) (9.52)<br>| e l © es (8.83)± (.76) | ~ .070 (1.78) ! 1.718 Max. ry<br>+.002<br>.062           Dia.- .001 .050 (1.27) (43.64)<br>-X2 (1.57        ) - .02+.05 PinPolar .115(2.92)+.006- (.010)+(.152) CODE “X” (9.52).375 (3.8).150<br>- (.254) -X2 “A”<br>Max.<br>©/9 © © Ciro Wfyit T e .550  |<br>.062 .027 ±.003 AC Coils(13.97)<br>.062            Dia. Pin±.001 - (1.57)Dia. (.69)± (.08) FULL R 1.025 Max.<br>BLUE BEAD ( 1.57         ) ± .02  8 Plcs +X1 .062          Dia. Pin+002 4 PLCS (26.04) 1.396 (12.70).500<br>BLUE BEAD -.001 (35.46) DC Coils<br>1.446<br>CODE  Circuit Board Pins  ke<br>CODE  (36.73)<br>Solder Hook Terminals “G”   28 VAC Coils<br>“C” Same as Code “F” Except polarizing .525 Max.<br>HOOK TERMINALS TIN/LEAD  PLATED Pin turned 90˚ to this plane. (13.34) fo<br>POLARIZING  PIN 1.718 Max. .040<br>r e s (43.64) ae (1.02)<br>CODE  .312<br>7 ofo © © a (7.92) ae<br>"W" 6-32 UNC-2A .375<br>2'0 6 0 2 Studs * te l e y (9.52)<br>CODE  90˚ Solder Pins<br>0.80 DIA .031<br>.300 ± .020(7.62)± .51 ( 2.03) “H” All Pins Bright Acid Tin/lead.400 “A” (.787)<br>.062            Dia. Term.- .001+.002 ens (10.61 ee ) MAX.<br>-X2 (1.57)+.05  - .02 8 Plcs (YN)-A—-— .200 | i 1.025 Max. .257<br>(5.08) (26.04) (6.52)<br>.525 Max.<br>soGOOD (fel) .100 R Typ. (13.34) te,<br>+X1 .200 BLUE BEAD .200 .200 .625<br>BLUE BEAD J (5.08) ok +.002 7a| n | (5.08) on (5.08) { ft ear (5.88) _<br>.062           Dia.- .001 *Metric threads available,To specify use  M  in place of  W oO oO<br>CII Mid-Range Relays<br>**----- End of picture text -----**<br>


Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters Revised 3-13 reference purposes only. unless otherwise specified. Specifications subject www.te.com to change. 

www.te.com 

USA: +1 800 522 6752 For additional support numbers Asia Pacific: +86 0 400 820 6015 please visit www.te.com UK: +44 800 267 666 

5–13 

CII Mid-Range Relays 

## **FCA-210 Series, 10 Amperes, DPDT** (Continued) 

## **Terminal Wiring** 

**==> picture [500 x 289] intentionally omitted <==**

**----- Start of picture text -----**<br>
DC Coils with  DC Coils AC Coils AC Coils<br>Transient Suppression 115 VAC 28 VAC<br>POLARIZING  POLARIZING  POLARIZING  POLARIZING<br>PIN PIN PIN PIN<br>-<br>1 X2 2 3 1 X2 - 2 3 1 X2 2 3 1 X2 2 3<br>B B B B<br>+ + AC AC<br>A A A A<br>X1 + X1 + X1 X1<br>BLUE BEAD BLUE BEAD BLUE BEAD BLUE BEAD<br>L e L é M L E N L E N<br>.200 .100<br>NOTE: Polarity must be observed with DC coil supply. (5.08) (2.54)<br>Relay is polarized with a permanent magnet and will not A1 -X2 A2 A3<br>operate or be damaged by reverse polarity. B<br>Diodes used in transient suppression and in AC rectifier<br>circuits have peak inverse voltage rating of 600 VDC  A<br>minimum.  Zener diodes have a minimum rating of 1 watt. .100(2.54) +X1 .200<br>.100 (5.08)<br>Terminal designations are for reference only and do not (2.54) .400<br>appear on the header. (10.16)<br>.600<br>(15.24)<br>TERMINAL VIEW<br>**----- End of picture text -----**<br>


Diodes used in transient suppression and in AC rectifier circuits have peak inverse voltage rating of 600 VDC minimum.  Zener diodes have a minimum rating of 1 watt. Terminal designations are for reference only and do not appear on the header. 

## **HOW TO ORDER** 

## **FCA-215-** 

**FCA-210-A Y  4** 

**RELAY TYPE TERMINALS** (Socket Pins, DC Coil) **ENCLOSURE** (With Flanges) **COIL** (28 VDC With Transient Suppression). ~~a"~~ 

**ENCLOSURE** (With Flanges) 

## **NOTE: Only DC coil models are QPL Approved** 

***** The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 

5–14 

Catalog 5-1773450-5 Revised 3-13 

USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 

Dimensions are shown for Dimensions are in millimeters reference purposes only. unless otherwise specified. Specifications subject to change. 

For additional support numbers please visit www.te.com 

www.te.com