Image not available
Illustrative purposes only
1934228-1 .
Connector, Z-PACK TinMan, 30 Contacts, 1.4 mm, Receptacle, Through Hole, 9 Rows
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TE CONNECTIVITY
- Product type: Backplane Connectors
- Gender: Receptacle
- Row Pitch: 1.9mm
- No. of Rows: 9Rows
- Pitch Spacing: 1.4mm
- Product Range: Z-PACK TinMan
- Contact Plating: Gold Plated Contacts
- No. of Contacts: 30Contacts
- Contact Material: Phosphor Bronze
- Contact Termination Type: Through Hole
- Card Edge / Backplane Connector Type: Backplane
| Delivery and price | |
|---|---|
| Units per pack | 3 |
| Price | 11.74 € |
| Current stock | 500+ |
| Lead time | 7 days |
Datasheet
Z-PACK TinMan High Speed, High Density Backplane Connector ## **Introduction** ## **Product Facts** - I **10+ Gbps performance** - I **100 ohm Impedance for Differential Pair configuration** - I **5 pair version offers 26 pairs/10mm [66 differential pairs/inch] fitting within a 25.40 [1.00] card slot pitch** - I **4 pair version offers 21 pairs/10mm [53 differential pairs/inch] fitting within a 20.30 [.800] card slot pitch** - I **3 pair version offering 16 pairs/10mm [40 differential pairs/inch] fitting within a 16.25 [.625] card slot pitch** - I **Right angle pin headers (coplanar) in 3 pair, 4 pair, and 5 pair versions** - I **Reliable, redundant contact design on every signal contact** - I **Modular system offered in various column versions** - I **Meets Industry reliability requirements of Bellcore/ Telcordia** - I **Sequencing for ground and signal contacts** - I **RoHS Compliant** ## **Future Product Extensions** - I **Vertical receptacles** - I **High speed cable assemblies and hardware** The Z-PACK TinMan backplane connector family is a cost-effective solution for customers searching for a high density, high performance backplane interconnect system. The Z-PACK TinMan connector design follows proven industry backplane convention by offering a fully protected right-angle receptacle for use on daughtercards where handling damage can be a concern when mating to a vertical male header. This connector permits field repairability at either the module or single pin levels. Ground contacts positioned within each column of the connector, combined with unique contact lead frame arrangements, enable the Z-PACK TinMan connector to achieve low crosstalk and high through-put performance levels. Reliability is provided with a dual point of contact mating interface and compliant pin interface to the printed circuit board. ## **Industry Applications** Ideally designed for cost pressured, high signal density applications requiring interconnection between two printed circuit boards, such as those typically found in server, storage, switch, router, and similar applications. The Z-PACK TinMan connector product family is suited to meet the demands of today’s modular system designs by offering a variety of configurations. The product family includes configurations to fit 20.32 [.800] and 25.40 [1.00] card slot spacing. ## **Technical Documents** **Product Specification** 108-2303 **Application Specification** 114-13202 **Routing Guide Report** #27GC001-1 ## **Material and Finish** **Signal Contact** — High Strength Copper Alloy **Ground Contact** — High Strength Copper Alloy **Housing** — Liquid Crystal Polymer **Platings** — Telcordia compliant interface, Nickel underplate **Compliant Pin Plating** — RoHS Compliant ## **Ratings** **Temperature Range** — -65°C to +90°C **Current Rating** — 0.5 A/contact @ < 30°C T-Rise **Durability** — 200 cycles **Dielectric Withstanding Voltage** — 560 VAC **Operating Voltage** — 250 VAC max. ## **Signal Integrity** **Characteristic Impedance** — Differential @ 100 ohms ±10% **Crosstalk** — Multi-pair differential crosstalk: 2.1% @ 50ps **Insertion Loss** — -2 dB @ 10 GHz **For additional information visit: http://www.tycoelectronics.com/zpacktinman** 1 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **Introduction** (Continued) ## **Need more information?** ## **Restriction on the use of Hazardous Substances (RoHS)** ## **Getting the Information You Need** Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: I Cross-Reference from Call Technical Support at the numbers listed below. At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are identified as: **RoHS Compliant** — Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. Technical Support is staffed with specialists well versed in Tyco Electronics products. They can provide you with: I Technical support I Catalogs - Non-compliant to Compliant Products - I Ability to browse RoHS Compliant Products in our on-line catalog RoHS - I Downloadable Technical DataCustomer Information Customer I PresentationMore detailed information Support regarding the definitions Center used above - I Technical Documents - I Product Samples NOTE: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly “Out of Scope” of the RoHS Directive such as hand tools and other non-electrical accessories. - I Authorized Distributor Locations NOTE: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to our website referenced at right. I So whatever your questions when it comes to RoHS, we’ve got the answers at www.tycoelectronics.com/leadfree ## **Disclaimer** While Tyco Electronics Corporation and its affiliates referenced herein (“Tyco Electronics”) have made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. Users should independently evaluate the suitability of, and test each product for, their application. The dimensions, specifications, designs, construction, materials and processes in this catalog are for reference purposes only and are subject to change without notice. Please consult Tyco Electronics for the most current product information. The export of certain Tyco Electronics products is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401 et seq.). Orders may be subject to export approval by the U.S. Government. Buyer must comply with all applicable export laws of all applicable jurisdictions. © 2005 and 2007 by Tyco Electronics Corporation. All International Rights Reserved. AMP, MULTI-BEAM XL, MULTIGIG RT, Z-PACK, Z-PACK TinMan and TE LOGO and Tyco Electronics are trademarks. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. 2 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Dimensions are shown for USA: 1-800-522-6752 reference purposes only. Canada: 1-905-470-4425 Specifications subject Mexico: 01-800-733-8926 to change. C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** ## **Table of Contents** **==> picture [114 x 35] intentionally omitted <==** **Introduction** (Continued) Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 5 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Pair Vertical Header Assemblies — Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Pair Vertical Header Assemblies — Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 Pair Vertical Header Assemblies — Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4 Pair Vertical Header Assemblies — Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4 Pair Vertical Header Assemblies — Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4 Pair Vertical Header Assemblies — Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3 Pair Vertical Header Assemblies — Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3 Pair Vertical Header Assemblies — Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3 Pair Vertical Header Assemblies — Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 5 Pair Right Angle Pin Header Assemblies — Double End Walls . . . . . . . . . . . . . . . . . . . . 22 4 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4 Pair Right Angle Pin Header Assemblies — Double End Walls . . . . . . . . . . . . . . . . . . . . 24 3 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3 Pair Right Angle Pin Header Assemblies — Double End Walls . . . . . . . . . . . . . . . . . . . . 26 Z-PACK TinMan Mid-Plane (Orthogonal) Connector Overview . . . . . . . . . . . . . . . . . . . 27-29 6 Pair Mid-Plane Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-32 4 Pair Mid-Plane Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-35 Z-PACK TinMan Product Mating Sequence Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Z-PACK MAX Part Number to Z-PACK TinMan Part Number Cross-Reference . . . . . . 37, 38 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 3 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Dimensions are shown for reference purposes only. Specifications subject to change. Z-PACK TinMan High Speed, High Density Backplane Connector ## **Introduction** (Continued) ## **Noise Table** I **Maximum, multiple source crosstalk** |**Victim Pair**<br>AB9<br>BC8|**Total Peak Receiver Noise**<br>**for Recommended Pin-Out**<br>0.8%<br>1.6%| |---|---| |DE9|1.9%| |EF8|1.9%| |GH9|2.0%| |HI8|2.0%| |JG9|2.0%| |KL8|2.1%| |MN9|1.7%| |NO8|0.8%| **Note:** Data includes PCB vias of both backplane and daughtercard connectors. Single mated connector pair 50 ps (20-80%) edge rate ## **Insertion Loss Plot** Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. 4 Catalog 5-1773447-9 Revised 7-07 Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 Z-PACK TinMan High Speed, High Density Backplane Connector ## **Introduction** (Continued) ## **Representative Eye Pattern** - I **10.0 Gbps data rate** - I **2[7] -1 PRBS** - I **Unequalized Signal** ## **Customer Connector Evaluation Kit** - I **Connector characterization** - I **Available for loan — contact your local Tyco Electronics Sales Engineer** - I **Time and frequency domain testable** - I **Testable to 18+ GHz (25+ Gb/s)** - I **Multiple calibration options** - I **Convenient SMA interface** ## **Customer System Evaluation Kit** - I **System characterization** - I **Available for loan — contact your local Tyco Electronics Sales Engineer** - I **Time and frequency domain testable** - I **Testable to 18+ GHz (25+ Gb/s)** - I **Multiple system lengths** - I **Convenient SMA interface** 5 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **5 Pair Right Angle Receptacle Assemblies** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling**| |---|---| |8<br>1934218-1|**15.35**<br>**13.30**<br>*<br>1934269-1,(R) 1934272-1,(L) 1934273-1,<br>.604<br>.524<br>1934271-1,1934349-1,1934350-1| |16<br>1934221-1|**30.55**<br>**28.50**<br>*<br>1934331-1, 1934334-1, 1934333-1,<br>1.203<br>1.122<br>1934332-1, 1934347-1, 1934348-1| * Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202. **==> picture [364 x 437] intentionally omitted <==** **----- Start of picture text -----**<br> A 31.81 [±] [ 0.05]<br>1.90 [1.252 [±][ .002] ]<br>[.075] [Ref.]<br>24.40 [±] [ 0.10]<br>19.50 [.961 [±][ .004] ]<br>[.768]<br>22.30 [±] [ 0.08]<br>[.878 [±][ .003] ]<br>1.40<br>[.055] [Ref.]<br>Row A<br>2.20<br>[.087] [Ref.] 1.40<br>[.055] [Ref.] 9.30<br>[.366] [Ref.]<br>1.70<br>[.067] [Ref.]<br>19.60 11.00<br>Ref.<br>[.772] [Ref.] [.433]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>-X- 1.21<br>[.048] [Ref.]<br>Row O<br>Row N<br>Row M<br>Row L<br>Row K<br>Row J<br>Row I 19.60<br>Row HRow GRow F [.055] 1.40 [Typ.] [.772] Ref.<br>Row E<br>Row DRow C [.059] 1.50 [Max.]<br>Row B<br>Row A 8 1<br>-Y-<br>1.90 BSC<br>[.075] [Typ.]<br>1.25 0.80<br>[.049] [Ref.] [.031] [Ref.]<br>BSC B<br>Recommended PC Board Layout<br>Daughterboard<br>Component Side Shown<br>Row A<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 6 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **4 Pair Right Angle Receptacle Assemblies** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling**| |---|---| |8<br>1934222-1|**15.35**<br>**13.30**<br>*<br>1934226-1, 1934304-1, 1934303-1,<br>.604<br>.524<br>1934306-1,1934225-1,1934354-1,| |16<br>1934225-1|**30.55**<br>**28.50**<br>*<br>1934315-1, 1934318-1, 1934317-1,<br>1.203<br>1.122<br>1934316-1, 1934351-1, 1934352-1,| * Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202. **==> picture [110 x 123] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>1.90<br>[.075] [Ref.]<br>1.40<br>[.055] [Ref.]<br>Row A<br>**----- End of picture text -----**<br> **==> picture [222 x 194] intentionally omitted <==** **----- Start of picture text -----**<br> 27.61 [±] [ 0.05]<br>[1.087 [±][ .002] ]<br>15.30 18.10 [±] [ 0.08]<br>[.602] Ref. [.713 [±][ .003] ]<br>20.20 [±] [ 0.10]<br>[.795 [±][ .004] ]<br>2.20 1.70<br>[.087] [Ref.] [.067] [Ref.]<br>9.30<br>1.40 [.366] [Ref.]<br>[.055] [Ref] [.]<br>15.40 11.00<br>Ref.<br>[.606] [Ref.] [.433]<br>Row A<br>**----- End of picture text -----**<br> **==> picture [222 x 226] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>-X-<br>1.21<br>[.048] [Ref.]<br>Row L<br>Row K<br>Row J<br>Row I<br>Row H<br>Row G 15.40<br>Row FRow E [.055] 1.40 [Typ.] [.606] Ref.<br>Row D 1.50<br>Row C [.059] [Max.]<br>Row B<br>Row A<br>8 1<br>-Y-<br>1.90 BSC<br>[.075] [Typ.]<br>1.25 0.80<br>[.049] [Ref.] [.031] [Ref.]<br>BSC B<br>Recommended PC Board Layout<br>Daughterboard<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 7 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **3 Pair Right Angle Receptacle Assemblies** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling**| |---|---| |8<br>1934226-1|**15.35**<br>**13.30**<br>*<br>1934299-1, 1934300-1, 1934301-1,<br>.604<br>.524<br>1934302-1,1934359-1,1934360-1,| |10<br>1934228-1|**19.15**<br>**17.10**<br>*<br>1934339-1, 1934341-1, 1934340-1,<br>.754<br>.673<br>1934342-1,1934357-1,1934358-1,| |16<br>1934229-1|**30.55**<br>**28.50**<br>*<br>1934339-1, 1934340-1, 1934345-1,<br>1.203<br>1.122<br>1934346-1, 1934355-1, 1934356-1,| * Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202. **23.41**[±] **[ 0.05]** [.922[±][ .002] ] **==> picture [113 x 107] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>1.90<br>[.075] [Ref.]<br>1.40<br>[.055] [Ref.]<br>Row A<br>**----- End of picture text -----**<br> **==> picture [244 x 392] intentionally omitted <==** **----- Start of picture text -----**<br> 13.90 [±] [ 0.08]<br>11.10<br>Ref. [.547 [±][ .003] ]<br>[.437]<br>16.00 [±] [ 0.10]<br>[.630 [±][ .004] ]<br>2.20 1.70<br>[.087] [Ref.] [.067] [Ref.]<br>9.30<br>1.40 [.366] [Ref.]<br>[.055] [Ref] [.]<br>11.20 11.00<br>Ref.<br>[.441] [Ref.] [.433]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>-X-<br>1.21<br>[.048] [Ref.]<br>Row I<br>Row H<br>Row G<br>Row F 1.40 11.20<br>Row E [.055] [Typ.] [.441] Ref.<br>Row D 1.50<br>Row C [.059] [Max.]<br>Row B<br>Row A<br>-Y-<br>1.90 BSC<br>[.075] [Typ.]<br>1.25 0.80<br>[.049] [Ref.] [.031] [Ref.]<br>BSC B<br>Row A<br>**----- End of picture text -----**<br> ## **Recommended PC Board Layout Daughterboard Component Side Shown** **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 8 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **5 Pair Vertical Header Assemblies** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***| |---|---| |8<br>1934269-1|**15.35**<br>**13.30**<br>1-1804791-1<br>1934218-1<br>.604<br>.524| |16<br>1934331-1|**30.55**<br>**28.50**<br>1-1804791-2<br>1934221-1<br>1.203<br>1.122| * Reference Application Specification 114-13202. **==> picture [346 x 485] intentionally omitted <==** **----- Start of picture text -----**<br> 4.50 [±] [ 0.15]<br>A [.177 [±][ .006] ] 2.50<br>[.098] [Ref.]<br>1.90 6.00 [±] [ 0.15]<br>[.075] [Ref.] 1.425 [.236 [±][ .006] ] 2.40<br>[.056] [Ref.] Ref.<br>[.094]<br>Row A<br>1.40<br>1.40 [.055] [Ref.]<br>[.055] [Ref.]<br>24.40 [±] [ 0.10]<br>[.961 [±][ .004] ]<br>22.60 [±] [ 0.08]<br>[.890 [±][ .003] ]<br>2.80 [±] [ 0.05]<br>2.38 [.110 [±][ .002] ]<br>[.094] [Ref.] 11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>BSC<br>-Y-<br>Row A<br>Row B<br>Row CRow D [.094] 2.40 [Ref.]<br>Row E<br>Row F 1.40<br>Row G [.055] [Typ.] 19.60<br>Row H [.772] Ref.<br>Row I<br>Row J<br>Row K<br>Row L<br>Row M<br>Row N<br>Row O<br>2.40<br>[.094] [Ref.]<br>1.90<br>[.075] [Typ.] 1.425<br>.625 [.056] [Ref.]<br>[.025] [Ref.]<br>B BSC<br>-X-<br>Recommended PC Board Layout<br>Backplane<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 9 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **5 Pair Vertical Header Assemblies — Left End Wall** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***| |---|---| |8<br>1934272-1|**16.30**<br>**13.30**<br>1-1804791-1<br>1934218-1<br>.642<br>.524| |16<br>1934333-1|**31.50**<br>**28.50**<br>1-1804791-2<br>1934221-1<br>1.240<br>1.122| * Reference Application Specification 114-13202. **==> picture [367 x 537] intentionally omitted <==** **----- Start of picture text -----**<br> 4.50 [±] [ 0.15]<br>A [.177 [±][ .006] ] 2.50<br>[.098] [Ref.]<br>1.90 6.00 [±] [ 0.15]<br>[.075] [Ref.] [.236 [±][ .006] ] 2.40<br>Ref.<br>[.094]<br>1.40<br>[.055] [Ref.]<br>24.40 [±] [ 0.10]<br>[.961 [±][ .004] ]<br>22.60 [±] [ 0.08]<br>[.890 [±][ .003] ]<br>1.40<br>[.055] [Ref.]<br>Row A<br>2.80 [±] [ 0.05]<br>2.38 [.110 [±][ .002] ]<br>[.094] [Ref.] 11.50 [±] [ 0.10]<br>[.453 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>BSC<br>-Y-<br>Row A<br>Row B<br>Row C 2.40<br>Row D [.094] [Ref.]<br>Row E<br>Row F 1.40<br>Row G [.055] [Typ.] 19.60<br>Row H Ref.<br>Row I [.772]<br>Row J<br>Row K<br>Row L<br>Row M<br>Row N<br>Row O<br>2.40<br>[.094] [Ref.]<br>1.90<br>[.075] [Typ.] 2.38<br>0.63 [.094] [Ref.]<br>[.025] [Ref.]<br>B BSC<br>-X-<br>Recommended PC Board Layout<br>Backplane<br>Component Side Shown<br>Note: For additional information * Finished Hole Diameter = 0.46 ± [0.05] [.018 ± [.002] ]<br>on pcb routing guidelines, Drilled Hole Diameter = 0.55 ± [0.02] [.022 ± [.001] ]<br>reference the Z-PACK TinMan Copper Thickness = 0.038 ± [0.013] [.0015 ± [.0005] ]<br>Connector Routing Guide Tin-Lead Thickness = 0.008 ± [0.004] [.0003 ± [.0002] ]<br>Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202<br>**----- End of picture text -----**<br> 10 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **5 Pair Vertical Header Assemblies — Right End Wall** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***| |---|---| |8<br>1934273-1|**17.00**<br>**13.30**<br>1-1804791-1<br>1934218-1<br>.669<br>.524| |16<br>1934334-1|**32.20**<br>**28.50**<br>1-1804791-2<br>1934221-1<br>1.268<br>1.122| * Reference Application Specification 114-13202. **==> picture [359 x 485] intentionally omitted <==** **----- Start of picture text -----**<br> 4.50 [±] [ 0.15]<br>A [.177 [±][ .006] ] 2.50<br>[.098] [Ref.]<br>1.90 6.00 [±] [ 0.15]<br>[.075] [Ref.] [.236 [±][ .006] ] 2.40<br>Ref.<br>[.094]<br>1.40<br>[.055] [Ref.]<br>24.40 [±] [ 0.10]<br>[.961 [±][ .004] ]<br>22.60 [±] [ 0.08]<br>[.890 [±][ .003] ]<br>1.40<br>[.055] [Ref.]<br>Row A<br>2.80 [±] [ 0.05]<br>2.38 [.110 [±][ .002] ]<br>[.094] [Ref.] 11.80 [±] [ 0.10]<br> [.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>BSC<br>-Y-<br>Row A<br>Row B<br>Row C 2.40<br>Row D [.094] [Ref.]<br>Row E<br>Row F 1.40<br>Row G [.055] [Typ.] 19.60<br>Row H Ref.<br>Row I [.772]<br>Row J<br>Row K<br>Row L<br>Row M<br>Row N<br>Row O<br>2.40<br>[.094] [Ref.]<br>1.90<br>[.075] [Typ.] 1.425<br>2.27 [.056] [Ref.]<br>[.089] [Ref.]<br>B BSC<br>-X-<br>Recommended PC Board Layout<br>Backplane<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 11 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **5 Pair Vertical Header Assemblies — Double End Walls** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***| |---|---| |8<br>1934271-1|**17.95**<br>**13.30**<br>1-1804791-1<br>1934218-1<br>.707<br>.524| |16<br>1934332-1|**33.15**<br>**28.50**<br>1-1804791-2<br>1934221-1<br>1.305<br>1.122| * Reference Application Specification 114-13202. **==> picture [359 x 485] intentionally omitted <==** **----- Start of picture text -----**<br> 4.50 [±] [ 0.15]<br>A [.177 [±][ .006] ] 2.50<br>[.098] [Ref.]<br>1.90 6.00 [±] [ 0.15]<br>[.075] [Ref.] [.236 [±][ .006] ] 2.40<br>Ref.<br>[.094]<br>Row A<br>1.40<br>1.40 [.055] [Ref.]<br>[.055] [Ref.]<br>24.40 [±] [ 0.10]<br>[.961 [±][ .004] ]<br>22.60 [±] [ 0.08]<br>[.890 [±][ .003] ]<br>2.80 [±] [ 0.05]<br>2.38 [.110 [±][ .002] ]<br>[.094] [Ref.] 11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>BSC<br>-Y-<br>Row A<br>Row B<br>Row CRow D [.094] 2.40 [Ref.]<br>Row E<br>Row F 1.40<br>Row G [.055] [Typ.] 19.60<br>Row H [.772] Ref.<br>Row I<br>Row J<br>Row K<br>Row L<br>Row M<br>Row N<br>Row O<br>2.40<br>[.094] [Ref.]<br>1.90<br>[.075] [Typ.] 2.375<br>2.275 [.093] [Ref.]<br>[.089] [Ref.]<br>B BSC<br>-X-<br>Recommended PC Board Layout<br>Backplane<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 12 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **4 Pair Vertical Header Assemblies** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***| |---|---| |8<br>1934305-1|**15.35**<br>**13.30**<br>1-1804790-1<br>1934222-1<br>.604<br>.524| |16<br>1934315-1|30.55<br>**28.50**<br>1-1804790-3<br>1934225-1<br>1.202<br>1.122| * Reference Application Specification 114-13202. **==> picture [367 x 525] intentionally omitted <==** **----- Start of picture text -----**<br> 4.50 [±] [ 0.15]<br>A [.177 [±][ .006] ] 2.50<br>[.098] [Ref.]<br>6.00 [±] [ 0.15]<br>1.425<br>[.236 [±][ .006] ]<br>[.056] [Ref.] 2.40<br>Ref.<br>[.094]<br>Row A<br>1.40 20.20 + 0.10– 0.55 [.055] 1.40 [Ref.]<br>[.055] [Ref.] [.795 + .004– .022]<br>18.40 + 0.08– 0.20<br>[.724 + .003– .008]<br>2.80 [±] [ 0.05]<br>1.90 [.110 [±][ .002] ]<br>[.075] [Ref.]<br>11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>BSC<br>-Y-<br>Row A<br>Row B<br>Row C 2.40<br>Row D [.094] [Ref.]<br>Row E<br>Row F 1.40 15.40<br>Row GRow H [.055] [Typ.] [.606] Ref.<br>Row I<br>Row J<br>Row K<br>Row L<br>2.40<br>1.90 [.094] [Ref.]<br>[.075] [Typ.]<br>1.425<br>.625 [.056] [Ref.]<br>[.025] [Ref.]<br>B BSC<br>-X-<br>Recommended PC Board Layout<br>Backplane<br>Component Side Shown<br>Note: For additional information * Finished Hole Diameter = 0.46 ± [0.05] [.018 ± [.002] ]<br>on pcb routing guidelines, Drilled Hole Diameter = 0.55 ± [0.02] [.022 ± [.001] ]<br>reference the Z-PACK TinMan Copper Thickness = 0.038 ± [0.013] [.0015 ± [.0005] ]<br>Connector Routing Guide Tin-Lead Thickness = 0.008 ± [0.004] [.0003 ± [.0002] ]<br>Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202<br>**----- End of picture text -----**<br> 13 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **4 Pair Vertical Header Assemblies — Left End Wall** **==> picture [368 x 611] intentionally omitted <==** **----- Start of picture text -----**<br> Column Part Number Dimension Application Mates With<br>A B Tooling*<br>17.00 13.30<br>8 1934303-1 1-1804790-1 1934222-1<br>.669 .524<br>31.50 28.50<br>16 1934317-1 1-1804790-3 1934225-1<br>1.240 1.122<br>* Reference Application Specification 114-13202.<br>4.50 [±] [ 0.15]<br>A [.177 [±][ .006] ] 2.50<br>[.098] [Ref.]<br>6.00 [±] [ 0.15]<br>2.375<br>[.236 [±][ .006] ]<br>[.094] [Ref.] 2.40<br>Ref.<br>[.094]<br>20.20 + 0.10– 0.55 [.055] 1.40 [Ref.]<br>[.795 + .004– .022]<br>18.40 + 0.08– 0.20<br>[.724 + .003– .008]<br>Row A<br>1.40<br>[.055] [Ref.] 2.80 [±] [ 0.05]<br>1.90 [.110 [±][ .002] ]<br>[.075] [Ref.] 11.80 [±] [ 0.10]<br> [.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>BSC<br>-Y-<br>Row A<br>Row B<br>Row C 2.40<br>Row D [.094] [Ref.]<br>Row E<br>Row F 1.40 15.40<br>Row GRow H [.055] [Typ.] [.606] Ref.<br>Row I<br>Row J<br>Row K<br>Row L<br>2.40<br>1.90 [.094] [Ref.]<br>[.075] [Typ.]<br>2.375<br>.625 [.094] [Ref.]<br>[.025] [Ref.]<br>B BSC<br>-X-<br>Recommended PC Board Layout<br>Backplane<br>Component Side Shown<br>Note: For additional information * Finished Hole Diameter = 0.46 ± [0.05] [.018 ± [.002] ]<br>on pcb routing guidelines, Drilled Hole Diameter = 0.55 ± [0.02] [.022 ± [.001] ]<br>reference the Z-PACK TinMan Copper Thickness = 0.038 ± [0.013] [.0015 ± [.0005] ]<br>Connector Routing Guide Tin-Lead Thickness = 0.008 ± [0.004] [.0003 ± [.0002] ]<br>Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202<br>**----- End of picture text -----**<br> 14 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **4 Pair Vertical Header Assemblies — Right End Wall** **==> picture [368 x 611] intentionally omitted <==** **----- Start of picture text -----**<br> Column Part Number Dimension Application Mates With<br>A B Tooling*<br>16.30 13.30<br>8 1934304-1 1-1804790-1 1934222-1<br>.642 .524<br>32.20 28.50<br>16 1934318-1 1-1804790-3 1934225-1<br>1.268 1.122<br>* Reference Application Specification 114-13202.<br>4.50 [±] [ 0.15]<br>A [.177 [±][ .006] ] 2.50<br>[.098] [Ref.]<br>6.00 [±] [ 0.15]<br>1.425<br>[.236 [±][ .006] ]<br>[.056] [Ref.] 2.40<br>Ref.<br>[.094]<br>20.20 + 0.10– 0.55 [.055] 1.40 [Ref.]<br>[.795 + .004– .022]<br>18.40 + 0.08– 0.20<br>[.724 + .003– .008]<br>Row A<br>1.40<br>1.90 [.055] [Ref.] [.110 2.80 [±][±] [ 0.05] [ .002] ]<br>[.075] [Ref.]<br>11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>BSC<br>-Y-<br>Row A<br>Row B<br>Row C 2.40<br>Row D [.094] [Ref.]<br>Row E<br>Row F 1.40 15.40<br>Row GRow H [.055] [Typ.] [.606] Ref.<br>Row I<br>Row J<br>Row K<br>Row L<br>2.40<br>1.90 [.094] [Ref.]<br>[.075] [Typ.]<br>1.425<br>2.275 [.056] [Ref.]<br>[.090] [Ref.]<br>B BSC<br>-X-<br>Recommended PC Board Layout<br>Backplane<br>Component Side Shown<br>Note: For additional information * Finished Hole Diameter = 0.46 ± [0.05] [.018 ± [.002] ]<br>on pcb routing guidelines, Drilled Hole Diameter = 0.55 ± [0.02] [.022 ± [.001] ]<br>reference the Z-PACK TinMan Copper Thickness = 0.038 ± [0.013] [.0015 ± [.0005] ]<br>Connector Routing Guide Tin-Lead Thickness = 0.008 ± [0.004] [.0003 ± [.0002] ]<br>Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202<br>**----- End of picture text -----**<br> 15 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **4 Pair Vertical Header Assemblies — Double End Walls** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***| |---|---| |8<br>1934306-1|**17.95**<br>**13.30**<br>1-1804790-1<br>1934222-1<br>.707<br>.524| |16<br>1934316-1|**33.15**<br>**28.50**<br>1-1804790-3<br>1934225-1<br>1.305<br>1.122| * Reference Application Specification 114-13202. **==> picture [353 x 466] intentionally omitted <==** **----- Start of picture text -----**<br> 4.50 [±] [ 0.15]<br>A [.177 [±][ .006] ] 2.50<br>[.098] [Ref.]<br>6.00 [±] [ 0.15]<br>2.375<br>[.236 [±][ .006] ]<br>[.094] [Ref.] 2.40<br>Ref.<br>[.094]<br>Row A<br>1.40 20.20 + 0.10– 0.55 [.055] 1.40 [Ref.]<br>[.055] [Ref.] [.795 + .004– .022]<br>18.40 + 0.08– 0.20<br>[.724 + .003– .008]<br>2.80 [±] [ 0.05]<br>1.90<br>[.110 [±][ .002] ]<br>[.075] [Ref.]<br>11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>BSC<br>-Y-<br>Row A<br>Row B<br>Row C 2.40<br>Row D [.094] [Ref.]<br>Row E<br>Row F 1.40 15.40<br>Row GRow H [.055] [Typ.] [.606] Ref.<br>Row I<br>Row J<br>Row K<br>Row L<br>2.40<br>1.90 [.094] [Ref.]<br>[.075] [Typ.]<br>2.375<br>2.275 [.094] [Ref.]<br>[.090] [Ref.]<br>B BSC<br>-X-<br>Recommended PC Board Layout<br>Backplane<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 16 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **3 Pair Vertical Header Assemblies** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***| |---|---| |8<br>1934299-1|**15.53**<br>**13.30**<br>1-1901457-1<br>1934226-1<br>.611<br>.524| |10<br>1934339-1|**19.15**<br>**17.10**<br>1-1901457-2<br>1934228-1<br>.754<br>.673| |16<br>1934343-1|**30.55**<br>**28.50**<br>1-1901457-3<br>1934229-1<br>1.203<br>1.122| * Reference Application Specification 114-13202. **==> picture [291 x 388] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>1.425 [.056] [Ref.] [.098] 2.50 [Ref.] 2.40<br>[.094] [Ref.]<br>Row A<br>16.00 + 0.10– 0.55<br>1.40 [.630 + .004– .022] 1.40 Typ.<br>[.055] [Ref.] 14.20 + 0.08– 0.20 [.055] Ref.<br>[.559 + .003– .008]<br>4.50 [±] [ 0.15] 2.80 [±] [ 0.05]<br>1.90 [.177 [±][ .006] ] [.110 [±][ .002] ]<br>[.075] [Ref.]<br>6.00 [±] [ 0.15]<br>[.236 [±][ .006] ]<br>11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>2.40<br>-X- [.094] [Ref.] BSC<br>-Y-<br>Row A<br>Row B<br>Row C<br>Row DRow ERow F [.055] 1.40 [Typ.] 11.20 [.441] [Ref.]<br>Row G<br>Row H<br>Row I<br>1.90 2.40<br>[.075] [Typ.] [.094] [Ref.]<br>0.625 1.425<br>[.025] [Ref.] [.056] [Ref.]<br>B BSC<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 17 Catalog 5-1773447-9 Revised 7-07 www.tycoelectronics.com USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **3 Pair Vertical Header Assemblies — Left End Wall** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***<br>**16.30**<br>**13.30**<br>1-1901457-1<br>1934226-1<br>.642<br>.524<br>**20.10**<br>**17.10**<br>1-1901457-2<br>1934228-1<br>.791<br>.673<br>**31.50**<br>**28.50**<br>1-1901457-3<br>1934229-1<br>1.240<br>1.122| |---|---| |8<br>1934300-1|| |10<br>1934340-1|| |16<br>1934344-1|| * Reference Application Specification 114-13202. **==> picture [291 x 388] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>2.375 [.094] [Ref.] [.098] 2.50 [Ref.] 2.40<br>[.094] [Ref.]<br>16.00 + 0.10– 0.55<br>[.630 + .004– .022] 1.40 Typ.<br>14.20 + 0.08– 0.20 [.055] Ref.<br>[.559 + .003– .008]<br>Row A<br>1.40<br>4.50 [±] [ 0.15] 2.80 [±] [ 0.05]<br>1.90 [.055] [Ref.]<br>[.177 [±][ .006] ] [.110 [±][ .002] ]<br>[.075] [Ref.]<br>6.00 [±] [ 0.15]<br>[.236 [±][ .006] ]<br>11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>2.40<br>-X- [.094] [Ref.] BSC<br>-Y-<br>Row A<br>Row B<br>Row C<br>Row DRow ERow F [.055] 1.40 [Typ.] 11.20 [.441] [Ref.]<br>Row G<br>Row H<br>Row I<br>2.40<br>1.90<br>[.094] [Ref.]<br>0.625 [.075] [Typ.] 2.375<br>[.025] [Ref.] [.094] [Ref.]<br>B BSC<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 18 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **3 Pair Vertical Header Assemblies — Right End Wall** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***<br>**17.00**<br>**13.30**<br>1-1901457-1<br>1934226-1<br>.669<br>.524<br>**20.08**<br>**17.10**<br>1-1901457-2<br>1934228-1<br>.791<br>.673<br>**32.20**<br>**28.50**<br>1-1901457-3<br>1934229-1<br>1.268<br>1.122| |---|---| |8<br>1934301-1|| |10<br>1934341-1|| |16<br>1934345-1|| * Reference Application Specification 114-13202. **==> picture [301 x 157] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>1.425 [.056] [Ref.] [.098] 2.50 [Ref.] 2.40<br>[.094] [Ref.]<br>16.00 + 0.10– 0.55<br>[.630 + .004– .022] 1.40 Typ.<br>14.20 + 0.08– 0.20 [.055] Ref.<br>[.559 + .003– .008]<br>Row A<br>1.40<br>4.50 [±] [ 0.15] 2.80 [±] [ 0.05]<br>1.90 [.055] [Ref.] [.177 [±][ .006] ] [.110 [±][ .002] ]<br>[.075] [Ref.]<br>6.00 [±] [ 0.15]<br>[.236 [±][ .006] ]<br>11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>**----- End of picture text -----**<br> **==> picture [203 x 198] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>2.40<br>-X- [.094] [Ref.] BSC<br>-Y-<br>Row A<br>Row B<br>Row C<br>Row DRow ERow F [.055] 1.40 [Typ.] 11.20 [.441] [Ref.]<br>Row G<br>Row H<br>Row I<br>2.40<br>1.90<br>[.094] [Ref.]<br>2.275 [.075] [Typ.] 1.425<br>[.090] [Ref.] [.056] [Ref.]<br>B BSC<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 19 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Catalog 5-1773447-9 Revised 7-07 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **3 Pair Vertical Header Assemblies — Double End Walls** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling***| |---|---| |8<br>1934302-1|**17.95**<br>**13.30**<br>1-1901457-1<br>1934226-1<br>.707<br>.524| |10<br>1934342-1|**21.75**<br>**17.10**<br>1-1901457-2<br>1934228-1<br>.856<br>.673| |16<br>1934346-1|**33.15**<br>**28.50**<br>1-1901457-3<br>1934229-1<br>1.305<br>1.122| * Reference Application Specification 114-13202. **==> picture [298 x 156] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>2.375 [.094] [Ref.] [.098] 2.50 [Ref.] 2.40<br>[.094] [Ref.]<br>Row A 16.00 + 0.10– 0.55<br>1.40 [.630 + .004– .022] 1.40 Typ.<br>[.055] [Ref.] 14.20 + 0.08– 0.20 [.055] Ref.<br>[.559 + .003– .008]<br>4.50 [±] [ 0.15] 2.80 [±] [ 0.05]<br>1.90 [.177 [±][ .006] ] [.110 [±][ .002] ]<br>[.075] [Ref.] 6.00 [±] [ 0.15]<br>[.236 [±][ .006] ]<br>11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>**----- End of picture text -----**<br> **==> picture [203 x 198] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>2.40<br>-X- [.094] [Ref.] BSC<br>-Y-<br>Row A<br>Row B<br>Row C<br>Row DRow ERow F [.055] 1.40 [Typ.] 11.20 [.441] [Ref.]<br>Row G<br>Row H<br>Row I<br>2.40<br>1.90<br>[.094] [Ref.]<br>2.275 [.075] [Typ.] 2.375<br>[.090] [Ref.] [.094] [Ref.]<br>B BSC<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 20 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **5 Pair Right Angle Pin Header Assemblies** **==> picture [362 x 557] intentionally omitted <==** **----- Start of picture text -----**<br> Column Part Number Dimension Application Mates With<br>A B Tooling<br>8 1934349-1 15.35 13.30 * 1934218-1<br>.604 .524<br>16 1934347-1 30.55 28.50 * 1934221-1<br>1.203 1.122<br>* Custom tooling not required. Utilizes flat-rock insertion tooling.<br>Reference Application Specification 114-13202.<br>A<br>1.90 27.61 [±] [ 0.05]<br>[.075] [Ref.] [1.087 [±][ .002] ]<br>0.625<br>[.025] [Ref.]<br>24.40 + 0.10– 0.55<br>19.50 [.768] [Ref.] [.961 + .004– .022]<br>22.60 + 0.08– 0.20<br>1.40 [.890 + .003– .008]<br>[.055] [Ref.]<br>Row A<br>2.20 [±] [ 0.15] 1.40 4.50<br>[.087 [±][ .006] ] [.055] [Ref.] [.177] [Ref.]<br>6.00<br>[.236] [Ref.]<br>1.70<br>[.067] [Ref.] 9.00 [±] [ 0.13]<br>[.354 [±][ .005] ]<br>19.60 6.80<br>[.772] [Ref.] [.268] [Ref.]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>1.21<br>-X- [.048] [Ref.]<br>Row O<br>Row N<br>Row M<br>Row L<br>Row K<br>Row J<br>Row I 19.60<br>Row HRow GRow F [.055] 1.40 [Typ.] [.772] Ref.<br>Row E<br>Row DRow C [.059] 1.50 [Max.]<br>Row B<br>Row A 1 8<br>1.95<br>[.077] [Ref.] 1.90 -Y-<br>BSC<br>0.90 [.075] [Typ.] 0.90 15.80<br>[.035] [Ref.] [.035] [Ref.] [.622] [Ref.]<br>1.15<br>[.045] [Ref.]<br>BSC B<br>Recommended PC Board Layout<br>Component Side Shown<br>Row A<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 21 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **5 Pair Right Angle Pin Header Assemblies — Double End Walls** **==> picture [368 x 551] intentionally omitted <==** **----- Start of picture text -----**<br> Column Part Number Dimension Application Mates With<br>A B Tooling<br>8 1934350-1 18.05 13.30 * 1934218-1<br>.711 .524<br>16 1934348-1 33.25 28.50 * 1934221-1<br>1.309 1.122<br>* Custom tooling not required. Utilizes flat-rock insertion tooling.<br>Reference Application Specification 114-13202.<br>A<br>1.90 27.61 [±] [ 0.05]<br>[.075] [Ref.] [1.087 [±][ .002] ]<br>2.375<br>[.094] [Ref.]<br>19.50 24.40 +– +<br>[.768] [Ref.] [.961 –<br>22.60 + 0.08– 0.20<br>1.40 [.890 + .003– .008]<br>[.055] [Ref.]<br>Row A<br>2.20 [±] [ 0.15] 1.40 4.50<br>[.087 [±][ .006] ] [.055] [Ref.] [.177] [Ref.]<br>6.00<br>[.236] [Ref.]<br>1.70<br>[.067] [Ref.] 9.00 [±] [ 0.13]<br>[.354 [±][ .005] ]<br>19.60 6.80<br>[.772] [Ref.] [.268] [Ref.]<br>Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>1.21<br>-X- [.048] [Ref.]<br>Row O<br>Row N<br>Row M<br>Row L<br>Row K<br>Row J<br>Row I 19.60<br>Row HRow GRow F [.055] 1.40 [Typ.] [.772] Ref.<br>Row E<br>Row DRow C [.059] 1.50 [Max.]<br>Row B<br>Row A 1 8<br>1.95<br>[.077] [Ref.] 1.90 -Y-<br>0.90 [.075] [Typ.] 0.90 15.80 BSC<br>2.10 [.035] [Ref.] [.035] 2.65 [Ref.] [.622] [Ref.]<br>[.083] [Ref.] BSC B [.104] [Ref.]<br>Recommended PC Board Layout<br>Component Side Shown<br>Row A<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 22 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **4 Pair Right Angle Pin Header Assemblies** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling**| |---|---| |8<br>1934353-1|**15.35**<br>**13.30**<br>*<br>1934222-1<br>.604<br>.524| |16<br>1934351-1|**30.55**<br>**28.50**<br>*<br>1934225-1<br>1.203<br>1.122| * Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202. **==> picture [356 x 186] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>1.90 24.00 [±] [ 0.05]<br>[.075] [Ref.] [.945 [±][ .002] ]<br>0.625<br>[.025] [Ref.]<br>20.20 + 0.10– 0.55<br>15.30 [.602] [Ref.] [.795 + .004– .022]<br>1.40 18.40 + 0.08– 0.20<br>[.055] [Ref.] [.724 + .003– .008]<br>Row A<br>2.20 [±] [ 0.15] 1.40 4.50<br>[.087 [±][ .006] ] [.055] [Ref.] [.177] [Ref.]<br>6.00<br>[.236] [Ref.]<br>1.70<br>[.067] [Ref.] 9.00 [±] [ 0.13]<br>[.354 [±][ .005] ]<br>15.40 6.80<br>[.606] [Ref.] [.268] [Ref.]<br>Row A<br>**----- End of picture text -----**<br> **==> picture [244 x 229] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>-X-<br>1.80<br>[.071] [Ref.]<br>Row L<br>Row K<br>Row J<br>Row I 15.40<br>Row HRow GRow F [.055] 1.40 [Typ.] [.606] Ref.<br>Row E<br>Row DRow C [.059] 1.50 [Max.]<br>Row B<br>Row A<br>1 8<br>1.95<br>[.077] [Ref.] 1.90 -Y-<br>BSC<br>0.90 [.075] [Typ.] 0.90 15.80<br>[.035] [Ref.] [.035] [Ref.] [.622] [Ref.]<br>1.15<br>[.045] [Ref.]<br>BSC B<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 23 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **4 Pair Right Angle Pin Header Assemblies — Double End Walls** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling**| |---|---| |8<br>1934354-1|**18.05**<br>**13.30**<br>*<br>1934222-1<br>.711<br>.524| |16<br>1934352-1|**33.25**<br>**28.50**<br>*<br>1934225-1<br>1.309<br>1.122| * Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202. **==> picture [363 x 187] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>1.90 24.00 [±] [ 0.05]<br>[.075] [Ref.] [.945 [±][ .002] ]<br>2.375<br>[.094] [Ref.]<br>20.20 + 0.10– 0.55<br>15.30 [.602] [Ref.] [.795 + .004– .022]<br>1.40 18.40 + 0.08– 0.20<br>[.055] [Ref.] [.724 + .003– .008]<br>Row A<br>2.20 [±] [ 0.15] 1.40 4.50<br>[.087 [±][ .006] ] [.055] [Ref.] [.177] [Ref.]<br>6.00<br>[.236] [Ref.]<br>1.70<br>[.067] [Ref.] 9.00 [±] [ 0.13]<br>[.354 [±][ .005] ]<br>15.40 6.80<br>[.606] [Ref.] [.268] [Ref.]<br>Row A<br>**----- End of picture text -----**<br> **==> picture [244 x 228] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>Connector Outline<br>-X-<br>1.80<br>[.071] [Ref.]<br>Row L<br>Row K<br>Row J<br>Row I 15.40<br>Row HRow GRow F [.055] 1.40 [Typ.] [.606] Ref.<br>Row E<br>Row DRow C [.059] 1.50 [Max.]<br>Row B<br>Row A<br>1 8<br>1.95<br>[.077] [Ref.] 1.90 -Y-<br>BSC<br>0.90 [.075] [Typ.] 0.90 15.80<br>[.035] [Ref.] [.035] [Ref.] [.622] [Ref.]<br>2.10<br>2.65<br>[.083] [Ref.]<br>[.104] [Ref.]<br>BSC B<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 24 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **3 Pair Right Angle Pin Header Assemblies** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling**<br>**15.35**<br>**13.30**<br>*<br>1934226-1<br>.604<br>.524<br>**19.15**<br>**17.10**<br>*<br>1934228-1<br>.754<br>.673<br>**30.55**<br>**28.50**<br>*<br>1934229-1<br>1.203<br>1.122| |---|---| |8<br>1934359-1|| |10<br>1934357-1|| |16<br>1934355-1|| * Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202. **==> picture [356 x 412] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>1.90 19.80 [±] [ 0.05]<br>[.075] [Ref.] [.780 [±][ .002] ]<br>0.625<br>[.025] [Ref.]<br>11.10 16.00 + 0.10– 0.55<br>1.40 [.437] [Ref.] [.630 + .004– .022]<br>[.055] [Ref.] 14.20 + 0.08– 0.20<br>[.559 + .003– .008]<br>Row A<br>2.20 [±] [ 0.15] 1.40 4.50<br>[.087 [±][ .006] ] [.055] [Ref.] [.177] [Ref.]<br>6.00<br>[.236] [Ref.]<br>1.70<br>[.067] [Ref.] 9.00 [±] [ 0.13]<br>[.354 [±][ .005] ]<br>11.20 6.80<br>[.441] [Ref.] [.268] [Ref.]<br>Finished Hole Size and<br>Plated Thru Holes*<br>-X-<br>Connector Outline<br>1.80<br>[.071] [Ref.]<br>Row I<br>Row H<br>Row GRow F [.055] 1.40 [Typ.] 11.20<br>Row E Ref.<br>Row DRow C [.059] 1.50 [Max.] [.441]<br>Row B<br>Row A<br>1 8<br>1.95<br>[.077] [Ref.] 1.90 -Y-<br>BSC<br>0.90 [.075] [Typ.] 0.90 15.80<br>[.035] [Ref.] [.035] [Ref.] [.622] [Ref.]<br>1.15<br>[.045] [Ref.]<br>BSC B<br>Recommended PC Board Layout<br>Component Side Shown<br>Row A<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 25 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **3 Pair Right Angle Pin Header Assemblies — Double End Walls** |**Column**<br>**Part Number**|**Dimension**<br>**Application**<br>**Mates With**<br>**A**<br>**B**<br>**Tooling**| |---|---| |8<br>1934360-1|**18.05**<br>**13.30**<br>*<br>1934226-1<br>.711<br>.524| |10<br>1934358-1|**21.85**<br>**17.10**<br>*<br>1934228-1<br>.860<br>.673| |16<br>1934356-1|**33.25**<br>**28.50**<br>*<br>19343229-1<br>1.309<br>1.122| * Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202. **==> picture [356 x 170] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>1.90 19.80 [±] [ 0.05]<br>[.075] [Ref.] [.780 [±][ .002] ]<br>2.375<br>[.094] [Ref.]<br>11.10 16.00 + 0.10– 0.55<br>1.40 [.437] [Ref.] [.630 + .004– .022]<br>[.055] [Ref.] 14.20 + 0.08– 0.20<br>[.559 + .003– .008]<br>Row A<br>2.20 [±] [ 0.15] 1.40 4.50<br>[.087 [±][ .006] ] [.055] [Ref.] [.177] [Ref.]<br>6.00<br>[.236] [Ref.]<br>1.70<br>[.067] [Ref.] 9.00 [±] [ 0.13]<br>[.354 [±][ .005] ]<br>11.20 6.80<br>[.441] [Ref.] [.268] [Ref.]<br>Row A<br>**----- End of picture text -----**<br> **==> picture [248 x 212] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>-X-<br>Connector Outline<br>1.80<br>[.071] [Ref.]<br>Row I<br>Row H<br>Row GRow FRow E [.055] 1.40 [Typ.] 11.20 Ref.<br>Row DRow C [.059] 1.50 [Max.] [.441]<br>Row B<br>Row A<br>1 8<br>1.95<br>[.077] [Ref.] 1.90 -Y-<br>BSC<br>[.035] 0.90 [Ref.] [.075] [Typ.] [.035] 0.90 [Ref.] 15.80 [.622] [Ref.]<br>2.10<br>[.083] [Ref.] 2.65<br>[.104] [Ref.]<br>BSC B<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 26 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector ## **Z-PACK TinMan Mid-Plane (Orthogonal) Connector Overview** ## **Product Facts** - I **Scalable to 25 Gbps** - I **100 ohm impedance for differential pair configuration** - I **Very low noise** - I **Outstanding insertion loss through 2 connectors and vias** - I **Skewless differential pair in a 2-connector system** - I **Utilizes the same header and receptacle part on both sides of the mid-plane** - I **Compatible with standard Z-PACK TinMan connectors and accessories** The Z-PACK TinMan mid- **and accessories** plane (orthogonal) connecI **4 pair x 4 pair and 6 pair x** tor is an extension of the **6 pair modules available** Z-PACK TinMan connector I **Reliable, redundant contact** product line, which includes **design on all contacts** perpendicular and coplanar interconnect solutions in I **Reliable press-fit style** 3 pair, 4 pair, and 5 pair **termination to PCB** versions. - I **RoHS compliant** This connector system is commonly referred to as an orthogonal connector system due to the orthogonal (perpendicular) orientation of the two system boards being connected on the front and rear side. It is built on the same technology and design approach as standard Z-PACK TinMan connectors with the same mating interface and leadframe geometry. ## **Applications** **The Z-PACK TinMan Mid-plane (orthogonal) connector is ideally designed for very demanding applications involving data rates in excess of 10 Gbps with many interconnections required. Such applications would include the following Telecom/Datacom equipment:** I **Switches** Superior electrical performance is achieved for several reasons. The front board to - I **Servers** - I **Routers** I **Storage** rear board connection through the mid-plane makes the plated through hole (PTH) part of the signal transmission path eliminating the detrimental effects of via stubs. This construction also eliminates the need to route all the high speed signal lines along the backplane minimizing signal loss and significantly improving signal throughput. The wide column spacing establishes a connector footprint with improved impedance and reduced electrical noise. The in-line footprint version also provides ease of trace routing with wide channels and a connector interface compatible with the orthogonal receptacle. This permits the use of the same daughtercard in both mid-plane and backplane configurations. The benefits are not limited to just signal integrity performance. The thinner midplane with fewer layers and significantly less complex routing is inherently less expensive. With trace routing typically limited to power distribution, low speed lines and potentially very few high speed links, the board can be fabricated from a cost effective material without the need to utilize techniques such as counter-boring or backdrilling. All of this permits the implementation of small to large scale full mesh interconnects with significantly reduced complexity at a lower cost and with improved signal integrity. **For additional information visit: http://www.tycoelectronics.com/zpacktinman** **==> picture [68 x 8] intentionally omitted <==** **----- Start of picture text -----**<br> 6x6 (36 signal pairs)<br>**----- End of picture text -----**<br> 27 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Z-PACK TinMan High Speed, High Density Backplane Connector ## **Z-PACK TinMan Mid-Plane (Orthogonal) Connector Overview** (Continued) ## **Noise Table** I **Maximum, multiple source crosstalk** ## **Technical Documents** **Product Specification** 108-2303 **Application Specification** 114-13202 **Routing Guide Report** #27GC002 ## **Material and Finish** |**VICTIM**<br>AB3<br>CD3|**Total Peak Receiver Noise**<br>**for Recommended Pin-Out**<br>0.50%<br>1.00%| |---|---| |EF3|0.90%| |GH3|0.80%| |JK3|0.90%| |LM3|0.60%| **Note:** Data includes PCB vias of both backplane and daughtercard connectors. Single mated connector pair. 50 ps (20-80%) edge rate. **Signal Contact** — High Strength Copper Alloy **Ground Contact** — High Strength Copper Alloy **Housing** — Liquid Crystal Polymer **Platings** — Telcordia compliant interface, Nickel underplate **Compliant Pin Plating** — RoHS Compliant ## **Ratings** **Temperature Range** — -65°C to +90°C **Current Rating** — 0.5 A/contact @ < 30°C T-Rise **Durability** — 200 cycles **Dielectric Withstanding Voltage** — 560 VAC **Operating Voltage** — 250 VAC max. ## **Signal Integrity** **Characteristic Impedance** — Differential @ 100 ohms ±10% **Crosstalk** — Multi-pair differential crosstalk: 1.0% @ 50ps **Insertion Loss** — -2 dB @ 10 GHz ## **Insertion Loss Plot** 28 Catalog 5-1773447-9 Revised 7-07 Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. www.tycoelectronics.com Z-PACK TinMan High Speed, High Density Backplane Connector ## **Z-PACK TinMan Mid-Plane (Orthogonal) Connector Overview** (Continued) ## **Representative Eye Pattern** - I **10.0 Gbps data rate** - I **2[7] -1 PRBS** - I **Unequalized Signal** ## **Customer Connector Evaluation Kit** - I **Connector characterization** - I **Available for loan — contact your local Tyco Electronics Sales Engineer** - I **Time and frequency domain testable** - I **Testable to 18+ GHz (25+ Gb/s)** - I **Multiple calibration options** - I **Convenient SMA interface** ## **Customer System Evaluation Kit** - I **System characterization** - I **Available for loan — contact your local Tyco Electronics Sales Engineer** - I **Time and frequency domain testable** - I **Testable to 18+ GHz (25+ Gb/s)** - I **Multiple calibration options** - I **Convenient SMA interface** 29 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Dimensions are shown for USA: 1-800-522-6752 reference purposes only. Canada: 1-905-470-4425 Specifications subject Mexico: 01-800-733-8926 to change. C. America: 52-55-1106-0803 Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **6 Pair Mid-Plane Assemblies** ## **6 Pair Right Angle Receptacle Assembly Part Number: 1934231-1** **Custom tooling not required. Utilizes flat-rock insertion tooling.** **Reference Application Specification 114-13202** **Mates with: 1934364-1, 1934363- 1** **==> picture [388 x 163] intentionally omitted <==** **----- Start of picture text -----**<br> 30.00 [±] [ 0.10]<br>[1.181 [±][ .004] ]<br>25.10<br>[.988] 27.90 [±] [ 0.08]<br>Ref. [1.098 [±][ .003] ]<br>Position<br>A1<br>1.80<br>2.20 [.071] [Ref.]<br>[.165] 4.20 [Ref.] [.055] 1.40 [Ref.] [.087]Ref. [.067] 1.70 [Ref.]<br>21.60 11.00<br>[.850] [Ref.] [.433] Ref.<br>**----- End of picture text -----**<br> **==> picture [280 x 308] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>2.625<br>[.103] [Ref.] Connector Outline<br>1.475 1.21<br>[.058] [Ref.] [.048] [Ref.]<br>Row M<br>Row L<br>Row K<br>Row J<br>Row H<br>Row G 32.40<br>[1.276] [Ref.]<br>Row F<br>Row E<br>Row D<br>Row C 1.80<br>[.071] [Typ.]<br>Row B<br>Row A<br>4.20<br>12.50 [.165] [Typ.] [.059] 1.50 [Max.] 11.00 [.433] [Ref.]<br>[.492] [Ref.] 0.10 2.10<br>[.004] [Ref.] [.083] [Typ.] BSC<br>Surface of -Y-<br>Mating Midplane<br>21.00 [.827] [Ref.] BSC<br>-X-<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC002. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 30 Catalog 5-1773447-9 Revised 7-07 USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **6 Pair Mid-Plane Assemblies** (Continued) ## **6 Pair Vertical Header Assembly** **Part Number: 1934364-1 Insertion Tooling: Contact Tyco Electronics Reference Application Specification 114-13202 Mates with: 1934231-1** **==> picture [339 x 198] intentionally omitted <==** **----- Start of picture text -----**<br> 27.50 [±] [ 0.05] 11.80 [±] [ 0.10]<br>[1.083 [±][ .002] ] [.465 [±][ .004] ]<br>30.00 + 0.10– 0.55<br>[1.181 + .004– .022]<br>[.173 4.40 [±][±] [ 0.15] [ .006] ] Typ. [.075 1.90 [±][±] [ 0.20] [ .008] ] Typ.<br>[.236 6.00 [±][±] [ 0.15] [ .006] ] Typ. [.071 1.80 [±][±] [ 0.20] [ .008] ] Typ.<br>2.80 [±] [ 0.05]<br>[.110 [±][ .002] ]<br>**----- End of picture text -----**<br> **==> picture [62 x 13] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>**----- End of picture text -----**<br> **Footprint shown for reference only. Contact Tyco Electronics engineering for details.** **==> picture [268 x 174] intentionally omitted <==** **----- Start of picture text -----**<br> 1 2 3 4 5 6<br>M<br>Connector Outline L<br>K<br>J<br>H<br>G<br>25.20<br>F [.992] [Ref.]<br>E<br>D<br>C<br>B<br>A<br>FRONT<br>25.20<br>[.992] [Ref.]<br>**----- End of picture text -----**<br> ## **Recommended PC Board Layout Component Side Shown** **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC002. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 31 Catalog 5-1773447-9 Revised 7-07 www.tycoelectronics.com USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector ## **6 Pair Mid-Plane Assemblies** (Continued) ## **6 Pair Vertical Header Assembly — In Line Footprint** **Part Number: 1934363-1 Insertion Tooling: Contact Tyco Electronics Reference Application Specification 114-13202 Mates with: 1934231-1** **==> picture [301 x 195] intentionally omitted <==** **----- Start of picture text -----**<br> 27.50 [±] [ 0.05]<br>[1.083 [±][ .002] ] 11.80 [±] [ 0.10]<br>[.465 [±][ .004] ]<br>=F:<br>a a auel8 —== W i=<br>30.00 + 0.10– 0.55<br>[1.181 + .004– .022]<br>Gel =e<br>1.40<br>n g == [.055] [Ref.] 2.40<br>[.094] [Ref.]<br>4.50 [±] [ 0.15]<br>[.177 [±][ .006] ] Typ. 1.80 [±] [ 0.20]<br>6.00 [±] [ 0.15] [.071 [±][ .008] ]<br>[.236 [±][ .006] ] Typ. 2.80 [±] [ 0.05]<br>| + '<br>[.110 [±][ .002] ]<br>**----- End of picture text -----**<br> **Footprint shown for reference only. Contact Tyco Electronics engineering for details.** **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC002. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 32 Catalog 5-1773447-9 Revised 7-07 www.tycoelectronics.com USA: 1-800-522-6752 South America: 55-11-2103-6000 Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Mexico: 01-800-733-8926 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **4 Pair Mid-Plane Assemblies** **4 Pair Right Angle Receptacle Assembly Part Number: 1934230-1 Custom tooling not required. Utilizes flat-rock insertion tooling.** **Reference Application Specification 114-13202 Mates with: 1934362-1, 1934361-1** **==> picture [359 x 130] intentionally omitted <==** **----- Start of picture text -----**<br> 21.60 [±] [ 0.10] 16.70<br>[.850 [±][ .004] ] [.657] [Ref.] 19.50 [±] [ 0.08]<br>[.768 [±][ .003] ]<br>Position A1<br>1.80<br>4.20 1.40 [.087] 2.20 [Ref.] [.071] [Ref.]<br>[.165] [Ref.] [.055] [Ref.] 1.70<br>[.067] [Ref.]<br>21.60 11.00<br>[.850] [Ref.] [.433] Ref.<br>**----- End of picture text -----**<br> **==> picture [242 x 267] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>2.625<br>[.103] [Ref.] Connector Outline<br>1.475 1.21<br>[.058] [Ref.] [.048] [Ref.]<br>Row H<br>Row G<br>Row F 21.60<br>Row E [.850] [Ref.]<br>Row D<br>Row C 1.80<br>[.071] [Typ.]<br>Row B<br>Row A<br>[.004] 0.10 [Ref.] [.165] 4.20 [Typ.] [.059] 1.50 [Max.] 11.00 [.433] [Ref.]<br>2.10<br>12.50 [.083] [Typ.] BSC<br>[.492] [Ref.]<br>Surface of -Y-<br>Mating Midplane<br>12.60 [.496] [Ref.] BSC<br>-X-<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC002. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 33 Catalog 5-1773447-9 Revised 7-07 www.tycoelectronics.com USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 39] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** **4 Pair Mid-Plane Assemblies** (Continued) ## **4 Pair Vertical Header Assembly** **Part Number: 1934362-1 Insertion Tooling: Contact Tyco Electronics Reference Application Specification 114-13202 Mates with: 1934230-1** **==> picture [304 x 165] intentionally omitted <==** **----- Start of picture text -----**<br> 19.10 [±] [ 0.05] 11.80 [±] [ 0.10]<br>[.752 [±][ .002] ] [.465 [±][ .004] ]<br>21.60 + 0.10– 0.55<br>[.850 + .004– .022 ]<br>[.173 4.40 [±][±] [ 0.15] [ .006] ] Typ. [.075 1.90 [±][±] [ 0.20] [ .008] ] Typ.<br>6.00 [±] [ 0.15] 1.80 [±] [ 0.20] Typ.<br>[.236 [±][ .006] ] Typ. [.071 [±][ .008] ]<br>2.80 [±] [ 0.05]<br>[.110 [±][ .002] ]<br>**----- End of picture text -----**<br> **==> picture [389 x 243] intentionally omitted <==** **----- Start of picture text -----**<br> Finished Hole Size and<br>Plated Thru Holes*<br>1 2 3 4<br>Footprint shown for reference<br>only. Contact Tyco Electronics Connector Outline HG<br>engineering for details. F<br>E 16.80<br>D [.691] [Ref.]<br>C<br>B<br>A<br>FRONT BSC<br>16.80<br>[.691] [Ref.] BSC<br>Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] on pcb routing guidelines, Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] reference the Z-PACK TinMan Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Connector Routing Guide Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Report #27GC002. Finishes other than Tin-Lead, See Appl. Spec. 114-13202 34 Catalog 5-1773447-9 Revised 7-07 www.tycoelectronics.com USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** **4 Pair Mid-Plane Assemblies** (Continued) ## **4 Pair Vertical Header Assembly — In Line Footprint** **Part Number: 1934361-1** **Insertion Tooling: Contact Tyco Electronics Reference Application Specification 114-13202 Mates with: 1934230-1** **==> picture [302 x 152] intentionally omitted <==** **----- Start of picture text -----**<br> 19.10 [±] [ 0.05]<br>[.752 [±][ .002] ] 11.80 [±] [ 0.10] 2.40<br>[.465 [±][ .004] ] [.094] [Ref.]<br>1.40<br>21.60 + 0.10– 0.55 [.055] [Ref.]<br>[.850 + .004– .022]<br>[.177 4.50 [±][±] [ 0.15] [ .006] ] Typ. [.071 1.80 [±][±] [ 0.20] [ .008] ] Typ.<br>6.00 [±] [ 0.15] 2.80 [±] [ 0.05]<br>[.236 [±][ .006] ] Typ. [.110 [±][ .002] ]<br>**----- End of picture text -----**<br> **==> picture [396 x 144] intentionally omitted <==** **----- Start of picture text -----**<br> 1 2 3 4 BSC<br>Footprint shown for reference Connector Outline<br>only. Contact Tyco Electronics H<br>engineering for details. G<br>F<br>E<br>16.80<br>D [.661] [Ref.]<br>C<br>B<br>A<br>12.60<br>[.496] [Ref.] BSC<br>**----- End of picture text -----**<br> **==> picture [109 x 15] intentionally omitted <==** **----- Start of picture text -----**<br> Recommended PC Board Layout<br>Component Side Shown<br>**----- End of picture text -----**<br> **Note:** For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC002. * Finished Hole Diameter = **0.46 ±[0.05]** [.018 ±[.002] ] Drilled Hole Diameter = **0.55 ±[0.02]** [.022 ±[.001] ] Copper Thickness = **0.038 ±[0.013]** [.0015 ±[.0005] ] Tin-Lead Thickness = **0.008 ±[0.004]** [.0003 ±[.0002] ] Finishes other than Tin-Lead, See Appl. Spec. 114-13202 35 Catalog 5-1773447-9 Revised 7-07 www.tycoelectronics.com USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector ## **Z-PACK TinMan Product Mating Sequence Chart** ||**Fully Mated**|**Fully Mated**||||**Reliable Mate**|| |---|---|---|---|---|---|---|---| |**Product**<br>**Family**|**Dim. C**|**Dim. A**<br>**Fully**<br>**Mated**|**Contact**||**Dim B.**<br>**Reliable**<br>**Mate**|**Dim B.**<br>**First Mate**<br>**Last Break**|**Fully Mated**<br>**Wipe Length**| |Z-PACK HM-Zd<br>Product|**1.50**<br>.059|**12.50**<br>.492|Ground Shield<br>Signal Level 2||**16.78** [.661]<br>**15.41** [.607]|**17.55** [.691]<br>**15.85** [.624]|**4.28** [.169]<br>**2.91** [.115]| ||||Signal Level 1||**13.91** [.548]|**14.35** [.565]|**1.41** [.056]| |Z-PACK HM-Zd<br>Guide<br>Hardware|**3.00**<br>.118|**12.50**<br>.492|24.0 mm Pin<br>**27.50** [1.083]<br>22.2 mm Pin<br>**25.70** [1.012]<br>KeyBlockingPoint<br>N/A|||**33.40** [1.315]<br>**31.60** [1.244]<br>**22.03** [.867]|N/A<br>N/A<br>N/A| |**Z-PACK TinMan**<br>**Product**|**1.50**<br>.059|**12.50**<br>.492|Ground Pins<br>Signal Level 2||**16.44** [.647]<br>**14.94** [.588]|**17.13** [.674]<br>**15.63** [.615]|**3.94** [.155]<br>**2.44** [.096]| ||||Signal Level 1||N/A|N/A|N/A| |Z-PACK 2mm HM<br>Product|**1.50**<br>.059|**12.50**<br>.492|Signal Level 3<br>Signal Level 2||**18.27** [.719]<br>**16.77** [.660]|**18.84** [.742]<br>**17.34** [.683]|**5.77** [.227]<br>**4.27** [.168]| ||||Signal Level 1||**15.27** [.601]|**15.84** [.624]|**2.77** [.109]| ||||Ground||**18.00** [.709]|—|**5.50** [.217]| |MULTIGIG RT<br>T1<br>Product|**2.50**<br>.098|**12.50**<br>.492|Signal Level 3<br>Signal Level 2||**18.00** [.709]<br>**16.50** [.650]|—<br>—|**5.50** [.217]<br>**4.00** [.157]| ||||Signal Level 1||**15.00** [.591]|—|**2.50** [.098]| ||||Ground||**18.00** [.709]|—|**5.50** [.217]| |MULTIGIG RT<br>T2<br>Product|**2.25**<br>.089|**12.50**<br>.492|Signal Level 3<br>Signal Level 2||**18.00** [.709]<br>**16.50** [.650]|—<br>—|**5.50** [.217]<br>**4.00** [.157]| ||||Signal Level 1||**15.00** [.591]|—|**2.50** [.098]| |MULTIGIG RT<br>T3<br>Product|**2.25**<br>.089|**12.50**<br>.492|Ground<br>Signal Level 1||**16.50** [.650]<br>**15.00** [.591]|—<br>—|**4.00** [.157]<br>**2.50** [.098]| |MULTIGIG RT<br>Power<br>Module|**5.50**<br>.217|**12.50**<br>.492|Power Level 3<br>Power Level 2<br>Power Level 1||**23.75** [.935]<br>**22.25** [.876]<br>**20.75** [.817]|—<br>—<br>—|**11.25** [.443]<br>**9.75** [.384]<br>**8.25** [.325]| |MULTIGIG RT<br>Guide<br>Hardware|N/A|**12.50**<br>.492|Guide Pin Key<br>**33.25**[1.309]<br>Guide ESD Contact<br>**30.75**[1.211]|||N/A<br>—|**20.75**[.817]<br>**18.25**[.719]| |Z-PACK HS3<br>Product|**1.50**<br>.059|**12.50**<br>.492|Ground<br>Signal Level 2||**17.08** [.672]<br>**16.05** [.632]|**17.60** [.693]<br>**16.47** [.648]|**4.78** [.188]<br>**3.75** [.148]| ||||Signal Level 1||**14.55** [.573]|**14.97** [.589]|**2.25** [.089]| ||||Power Level 3||**20.25** [.797]|**20.95** [.825]|**8.10** [.319]| |UPM|**3.50**<br>.138|**12.50**<br>.492|Power Level 2||**18.65** [.734]|**19.35** [.762]|**6.50** [.256]| ||||Power Level 1||**17.03** [.670]|**17.73** [.698]|**4.88** [.192]| |UPM<br>Guide<br>Hardware|**5.75**<br>.226|**12.50**<br>.492|Guide Pin Key<br>**31.39** [1.236]<br>Keyed Guide Pin<br>**31.39** [1.236]<br>Keyed Guide Pin<br>**35.23** [1.387]|||**36.16** [1.424]<br>**36.16** [1.424]<br>**40.00** [1.575]|N/A<br>N/A<br>N/A| ||||PreMate Power —<br>Level 1<br>—|||**16.84**[.663]|**5.61**[.221]<br>Min.| |MULTI-BEAM XL<br>Right Angle<br>Header to<br>Vertical<br>Receptacle|**5.08**<br>.200|**14.73**<br>.580|PostMate Power —<br>Level 2<br>—<br>PreMate Signal —<br>Level 2<br>—|||**17.81**[.701]<br>**18.26**[.719]|**4.34**[.171]<br>Min.<br>**3.81**[.150]<br>Min.| ||||PostMate Signal —<br>Level 3<br>—|||**19.53**[.769]|**2.54**[.100]<br>Min.| ||||PreMate Power —<br>Level 1<br>—|||**15.32**[.603]|**5.61**[.221]<br>Min.| |MULTI-BEAM XL<br>Right Angle<br>Receptacle<br>to Vertical<br>Header|**3.81**<br>.150|**13.21**<br>.520|PostMate Power —<br>Level 2<br>—<br>PreMate Signal —<br>Level 2<br>—|||**16.28**[.641]<br>**16.74**[.659]|**4.34**[.171]<br>Min.<br>**3.81**[.150]<br>Min.| ||||PostMate Signal —<br>Level 3<br>—|||**18.01**[.709]|**2.54**[.100]<br>Min.| Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 36 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **Z-PACK MAX Connector to Z-PACK TinMan Connector Base Part Number Cross Reference*** |**Z-PACK MAX**|**Z-PACK TinMan**|| |---|---|---| |**Connector Base**|**Connector Base**|**Description**| |**Part Number**|**Part Number**|| |1469659|1934218|Receptacle Assembly,5pair,Standard,8 Column| |1469660|1934269|Header Assembly,Open Ended,5 Pair 8 Column| |1469680|1934272|Header Assembly,Left Wall,5 Pair 8 Column| |1469680|1934273|Header Assembly,Right Wall,5 Pair 8 Column| |1469681|1934271|Header Assembly,Double Wall,5 Pair 8 Column| |1469687|1934315|Header Assembly,Open Ended,4 Pair 16 Column| |1469693|1934225|Receptacle Assembly,4pair,Standard,16 Column| |1469702|1934303|Header Assembly,Left Wall,4 Pair 8 Column| |1469702|1934304|Header Assembly,Right Wall,4 Pair 8 Column| |1469703|1934317|Header Assembly,Left Wall,4 Pair 16 Column| |1469703|1934318|Header Assembly,Right Wall,4 Pair 16 Column| |1469706|1934306|Header Assembly,Double Wall,4 Pair 8 Column| |1469707|1934316|Header Assembly,Double Wall,4 Pair 16 Column| |1469716|1934305|Header Assembly,Open Ended,4 Pair 8 Column| |1469717|1934222|Receptacle Assembly,4pair,Standard,8 Column| |1469735|1934349|Right Angle Header Assembly,Open Ended,5 Pair 8 Column| |1469737|1934350|Right Angle Header Assembly,Double Wall,5 Pair 8 Column| |1469753|1934331|Header Assembly,Open Ended,5 Pair 16 Column| |1469754|1934221|Receptacle Assembly,5pair,Standard,16 Column| |1469755|1934333|Header Assembly,Left Wall,5 Pair 16 Column| |1469755|1934334|Header Assembly,Right Wall,5 Pair 16 Column| |1469756|1934332|Header Assembly,Double Wall,5 Pair 16 Column| |1469768|1934305|Header Assembly,Open Ended,4 Pair 8 Column| |1469769|1934222|Receptacle Assembly,4pair,Standard,8 Column| |1469774|1934311|Header Assembly,Open Ended,4 Pair 10 Column| |1469775|1934224|Receptacle Assembly,4pair,Standard,10 Column| |1469784|1934362|4x4 Orthogonal Offset Header Assembly,Double Wall| |1469785|1934230|Receptacle Assembly,4x4,Orthogonal| |1469786|1934364|6x6 Orthogonal Offset Header Assembly,Double Wall| |1469787|1934231|Receptacle Assembly,6x6,Orthogonal| |1469788|1934311|Header Assembly,Open Ended,4 Pair 10 Column| |1469789|1934224|Receptacle Assembly,4pair,Standard,10 Column| |1469793|1934353|Right Angle Header Assembly,Open Ended,4 Pair 8 Column| |1469795|1934354|Right Angle Header Assembly,Double Wall,4 Pair 8 Column| |1469807|1934339|Header Assembly,Open Ended,3 Pair 10 Column| |1469809|1934228|Receptacle Assembly,3pair,Standard,10 Column| |1469827|1934339|Header Assembly,Open Ended,3 Pair 10 Column| |1469828|1934228|Receptacle Assembly,3pair,Standard,10 Column| |1469829|1934299|Header Assembly,Open Ended,3 Pair 8 Column| |1469831|1934226|Receptacle Assembly,3pair,Standard,8 Column| |1469853|1934335|Header Assembly,Open Ended,3 Pair 6 Column| |1469854|1934227|Receptacle Assembly,3pair,Standard,6 Column| |1469867|1934340|Header Assembly,Left Wall,3 Pair 10 Column| |1469867|1934341|Header Assembly,Right Wall,3 Pair 10 Column| |1469871|1934357|Right Angle Header Assembly,Open Ended,3 Pair 10 Column| |1469874|1934358|Right Angle Header Assembly,Double Wall,3 Pair 10 Column| |1469935|1934342|Header Assembly,Double Wall,3 Pair 10 Column| |1469945|1934300|Header Assembly,Left Wall,3 Pair 8 Column| |1469945|1934301|Header Assembly,Right Wall,3 Pair 8 Column| |1469946|1934302|Header Assembly,Double Wall,3 Pair 8 Column| |1469949|1934343|Header Assembly,Open Ended,3 Pair 16 Column| |1469950|1934344|Header Assembly,Left Wall,3 Pair 16 Column| |1469950|1934345|Header Assembly,Right Wall,3 Pair 16 Column| |1469951|1934346|Header Assembly,Double Wall,3 Pair 16 Column| |1469955|1934229|Receptacle Assembly,3pair,Standard,16 Column| |1469960|1934335|Header Assembly,Open Ended,3 Pair 6 Column| *As announced on 6/20/07, Tyco Electronics now offers the Z-PACK TinMan product line as a form, fit and function replacement to the Z-PACK MAX product line. This chart will assist in finding the Z-PACK TinMan connector part number if you have a Z-PACK MAX connector part number. 37 Catalog 5-1773447-9 Revised 7-07 Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **Z-PACK MAX Connector to Z-PACK TinMan Connector Base Part Number Cross Reference*** (Continued) |**Z-PACK MAX**|**Z-PACK TinMan**|| |---|---|---| |**Connector Base**|**Connector Base**|**Description**| |**Part Number**|**Part Number**|| |1469961|1934336|Header Assembly,Left Wall,3 Pair 6 Column| |1469961|1934337|Header Assembly,Right Wall,3 Pair 6 Column| |1469962|1934338|Header Assembly,Double Wall,3 Pair 6 Column| |1469966|1934227|Receptacle Assembly,3pair,Standard,6 Column| |1469974|1934359|Right Angle Header Assembly,Open Ended,3 Pair 8 Column| |1469977|1934360|Right Angle Header Assembly,Double Wall,3 Pair 8 Column| |1934007|1934321|Header Assembly,Open Ended,5 Pair 6 Column| |1934008|1934323|Header Assembly,Left Wall,5 Pair 6 Column| |1934008|1934324|Header Assembly,Right Wall,5 Pair 6 Column| |1934009|1934322|Header Assembly,Double Wall,5 Pair 6 Column| |1934010|1934219|Receptacle Assembly,5pair,Standard,6 Column| |1934018|1934347|Right Angle Header Assembly,Open Ended,5 Pair 16 Column| |1934021|1934348|Right Angle Header Assembly,Double Wall,5 Pair 16 Column| |1934026|1934351|Right Angle Header Assembly,Open Ended,4 Pair 16 Column| |1934029|1934352|Right Angle Header Assembly,Double Wall,4 Pair 16 Column| |1934034|1934355|Right Angle Header Assembly,Open Ended,3 Pair 16 Column| |1934037|1934356|Right Angle Header Assembly,Double Wall,3 Pair 16 Column| |1934106|1934313|Header Assembly,Left Wall,4 Pair 10 Column| |1934106|1934314|Header Assembly,Right Wall,4 Pair 10 Column| |1934107|1934312|Header Assembly,Double Wall,4 Pair 10 Column| |1934121|1934364|6x6 Orthogonal Offset Header Assembly,Double Wall| |1934122|1934231|Receptacle Assembly,6x6,Orthogonal| |1934127|1934220|Receptacle Assembly,5pair,Standard,10 Column| |1934136|1934315|Header Assembly,Open Ended,4 Pair 16 Column| |1934137|1934317|Header Assembly,Left Wall,4 Pair 16 Column| |1934137|1934318|Header Assembly,Right Wall,4 Pair 16 Column| |1934141|1934363|6x6 Orthogonal In-Line Header Assembly,Double Wall| |1934165|1934361|4x4 Orthogonal In-Line Header Assembly,Double Wall| |1934171|1934275|Receptacle Assembly,4pair,Standard,14 Column| |1934194|1934325|Header Assembly,Open Ended,5 Pair 10 Column| |1934208|1934326|Header Assembly,Double Wall,5 Pair 10 Column| |1934210|1934327|Header Assembly,Left Wall,5 Pair 10 Column| |1934210|1934328|Header Assembly,Right Wall,5 Pair 10 Column| |N/A|1934223|Receptacle Assembly,4pair,Standard,6 Column| |N/A|1934274|Header Assembly5 Pair Open Ended 8 Column Notched Wall| |N/A|1934276|Receptacle Assembly,5pair,Standard,14 Column| |N/A|1934287|Header Assembly,Open Ended,5 Pair 14 Column| |N/A|1934288|Header Assembly,Open Ended,4 Pair 14 Column| |N/A|1934289|Header Assembly,Double Wall,5 Pair 14 Column| |N/A|1934290|Header Assembly,Double Wall,4 Pair 14 Column| |N/A|1934307|Header Assembly,Open Ended,4 Pair 6 Column| |N/A|1934308|Header Assembly,Double Wall,4 Pair 6 Column| |N/A|1934309|Header Assembly,Left Wall,4 Pair 6 Column| |N/A|1934310|Header Assembly,Right Wall,4 Pair 6 Column| |N/A|1934319|Header Assembly,Left Wall,4 Pair 14 Column| |N/A|1934320|Header Assembly,Right Wall,4 Pair 14 Column| |N/A|1934329|Header Assembly,Left Wall,5 Pair 14 Column| |N/A|1934330|Header Assembly, Right Wall, 5 Pair 14 Column| - *As announced on 6/20/07, Tyco Electronics now offers the Z-PACK TinMan product line as a form, fit and function replacement to the Z-PACK MAX product line. This chart will assist in finding the Z-PACK TinMan connector part number if you have a Z-PACK MAX connector part number. 38 Catalog 5-1773447-9 Revised 7-07 Dimensions are shown for USA: 1-800-522-6752 reference purposes only. Canada: 1-905-470-4425 Specifications subject Mexico: 01-800-733-8926 to change. C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. Z-PACK TinMan High Speed, High Density Backplane Connector **==> picture [114 x 40] intentionally omitted <==** **==> picture [114 x 35] intentionally omitted <==** ## **Part Number Index** **Note:** This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. |1934218<br>6<br>1934221<br>6<br>1934222<br>7<br>1934225<br>7<br>1934226<br>8<br>1934228<br>8<br>1934229<br>8<br>1934230<br>33<br>1934231<br>30<br>1934269<br>9<br>1934271<br>12<br>1934272<br>10<br>1934273<br>11<br>1934299<br>17<br>1934300<br>18<br>1934301<br>19<br>1934302<br>20<br>1934303<br>14<br>1934304<br>15<br>**Part No.**<br>**Page**|1934305<br>13<br>1934306<br>16<br>1934315<br>13<br>1934316<br>16<br>1934317<br>14<br>1934318<br>15<br>1934331<br>9<br>1934332<br>12<br>1934333<br>10<br>1934334<br>11<br>1934339<br>17<br>1934340<br>18<br>1934341<br>19<br>1934342<br>20<br>1934343<br>17<br>1934344<br>18<br>1934345<br>19<br>1934346<br>20<br>1934347<br>21<br>**Part No.**<br>**Page**|**Part No.**<br>**Page**| |---|---|---| |||1934348<br>22| |||1934349<br>21| |||1934350<br>22| |||1934351<br>23| |||1934352<br>24| |||1934353<br>23| |||1934354<br>24| |||1934355<br>25| |||1934356<br>26| |||1934357<br>25| |||1934358<br>26| |||1934359<br>25| |||1934360<br>26| |||1934361<br>35| |||1934362<br>34| |||1934363<br>32| |||1934364<br>31| |||| ## **Tooling Part Number Index** |**ote:**This index lists all cataloged parts<br>y base no. only. Complete part nos. (with<br>refixes and/or suffixes) are shown on the<br>age(s) indicated.|**Part No.**<br>**Page**| |---|---| ||1804790<br>13,14,15,16| ||1804791<br>9,10,11,12| ||1901457<br>17, 18, 19, 20| Dimensions are shown for reference purposes only. Specifications subject to change. South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 39 Catalog 5-1773447-9 Dimensions are in inches and Revised 7-07 millimeters unless otherwise specified. Values in brackets www.tycoelectronics.com are metric equivalents. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 www.tycoelectronics.com **Global Contacts** **==> picture [114 x 43] intentionally omitted <==** ## **Americas** **Argentina** – Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 **Brasil** – São Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 **Canada** – Toronto Phone: +905-475-6222 Fax: +905-474-5520 **Product Information Center: (Technical Support)** Phone: +905-470-4425 Fax: +905-474-5525 **Colombia** – Bogota Phone: +57-1-231-9398 Fax: +57-1-660-0206 **Mexico** – Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 **United States** – Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 **Product Information Center: (Technical Support)** Phone: +800-522-6752 Fax: +717-986-7575 **For Latin/South American Countries not shown** Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 ## **Asia/Pacific** **Australia** – Sydney **Japan** – Toyko Phone: +61-2-9554-2600 Phone: +81-44-844-8111 Fax: +61-2-9502-2556 Fax: +81-44-812-3207 **Product Information Center: Product Information Center: (Technical Support) (Technical Support)** Phone: +61-2-9840-8200 Phone: +81-44-844-8013 Fax: +61-2-9634-6188 Fax: +81-44-812-3200 **India** – Bangalore **Korea** – Seoul Phone: +91-80-285-40800 Phone: +82-2-3415-4500 Fax: +91-80-285-40820 Fax: +82-2-3486-3810 **Indonesia** – Jakarta **Malaysia** – Kuala Lumpur Phone: +65-6482-0311 Phone: +60-3-78053055 Fax: +65-6482-1012 Fax: +60-3-78053066 **New Zealand** – Auckland **Singapore** – Singapore Phone: +64-9-634-4580 Phone: +65-6482-0311 Fax: +64-9-634-4586 Fax: +65-6482-1012 **Philippines** – Makati City **Thailand** – Bangkok Phone: +632-848-0171 Phone: +66-2-955-0500 Fax: +632-867-8661 Fax: +66-2-955-0505 **People’s Republic of China Vietnam and Indochina** – Hong Kong Ho Chi Minh City Phone: +852-2735-1628 Phone: +84-8 930-5546 Fax: +852-2735-0243 Fax: +84-8 930-3443 Shanghai Phone: +86-21-2407-1588 Fax: +86-21-2407-1599 Taiwan – Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 ## **Europe/Middle East/Africa** **Austria** – Vienna **Germany** – Bensheim Phone: +43-1 90 5 60-0 Phone: +49-6251-133-0 Fax: +43-1 90 5 60-1333 Fax: +49-6251-133-1600 **Product Information Center: Belgium** – Kessel-Lo **(Technical Support)** Phone: +32-16-35-23-00 Phone: +49-6251-133-1999 Fax: +32-16-35-23-52 Fax: +49-6251-133-1988 **Bulgaria** – Sofia **Germany** – Langen Phone: +359-2-971-2152 Phone: +49-6103-709-0 Fax: +359-2-971-2153 Fax: +49-6103-709-1223 **Czech Republic** – Kurim **Germany** – Speyer Phone: +420-5-41-162-111 Phone: +49-6232-30-0 Fax: +420-5-41-162-223 Fax: +49-6232-30-2243 **Denmark** – Glostrup **Germany - HTS Division** – Neunkirchen Phone: +45-43-480-452 Phone: +49-2247-305-0 Fax: +45-43-441-414 Fax: +49-2247-305-122 **Egypt** – Cairo **Greece** – Athens Phone: +20-2-29 04 281 Phone: +30-210-9370-396/397 Fax: +20-2-41 92 334 Fax: +30-210-9370-655 **Estonia** – Tartu **Hungary** – Budapest Phone: +372-5138-274 Phone: +36-1-289-1000 Fax: +372-7400-779 Fax: +36-1-289-1010 **Ireland** – Dublin **Finland** – Helsinki Phone: +353-1-820-3000 Phone: +358-95-12-34-20 Fax: +353-1-820-9790 Fax: +358-95-12-34-250 **Israel** – Yokneam **France** – Cergy-Pontoise Phone: +972-4-959-0508 Phone: +33-1-3420-8888 Fax: +972-4-959-0506 Fax: +33-1-3420-8600 **Product Information Center: Italy** – Collegno (Torino) **(Technical Support)** Phone: +39-011-4012-111 Phone: +33-1-3420-8943 Fax: +39-011-4031116 Fax: +33-1-3420-8623 **Lithuania** – Vilnius Phone: +370-5-2131-402 Fax: +370-5-2131-403 **Netherlands** – ’s-Hertogenbosch Phone: +31-73-624-62-46 Fax: +31-73-621-23-65 **Product Information Center: (Technical Support)** Phone: +31-73-6246-999 Fax: +31-73-6246-998 **Norway** – Nesbru Phone: +47-66-77-8886 Fax: +47-66-77-8855 **Poland** – Warsaw Phone: +48-22-45-76-700 Fax: +48-22-45-76-720 **Romania** – Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 **Russia** – Moscow Phone: +7-495-926-5506/07/08/09 Fax: +7-495-926-5505 **Russia** – St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 **Slovenia** – Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 **South Africa** – Port Elizabeth Phone: +2741-503-4500 Fax: +2741-581-0440 **Spain** – Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 **Product Information Center: (Technical Support):** Phone: +34-93-291-0330 Fax: +34-93-200-3779 **Sweden** – Upplands Väsby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 **Switzerland** – Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 **Turkey** – Istanbul Phone: +90-212-281-8181/2/3 Fax: +90-212-281-8184 **Ukraine** – Kiev Phone: +380-044-206-2265 Fax: +380-044-206-2264 **United Kingdom** – Swindon Phone: +44-8706-080-208 Fax: +44-1793-572-516 **Product Information Center: (Technical Support)** Freephone GB: 0800-267-666 Phone: +44-8706-080-208 Fax: +44-208-420-8081 **For Middle East/African Countries Not Shown** Phone: +33-1-3420-8866 Fax: +33-1-3420-8300 5-1773447-9–LUG–PDF–7-07 Printed in the U.S.A. Tyco Electronics Corporation www.tycoelectronics.com
Updated at February 9, 2023
TE Connectivity is a globally recognized engineering and manufacturing leader, specializing in highly reliable connectivity and sensing solutions. Renowned for innovation and durability, their components are engineered to perform in the most demanding environments, supporting critical advancements in industrial equipment, data communications, and automotive systems. Our extensive selection of TE Connectivity products is anchored by their industry-leading connector portfolio. We carry a comprehensive array of terminal blocks and accessories, including wire-to-board, pluggable, standard, and barrier configurations, alongside robust backplane connectors designed to ensure secure and efficient power and data transmission in complex circuit designs. Beyond physical connections, TE Connectivity is a premier manufacturer of precision sensors, antennas, and electromechanical switching components. Our inventory features a wide variety of RF antennas and highly accurate pressure, temperature, and force transducers. Additionally, we provide an expansive range of TE's dependable relays, encompassing automotive, power, and signal variants, alongside essential passive components like shielding gaskets and RF inductors to fully support your engineering requirements.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →