185104J63RAA-F

**Type 168/185  Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion** 

The Type 168/185 series radial lead metallized polyester box capacitors are available in bulk (Type 168) or on ammo pack or tape and reel (Type 185). These capacitors are constructed in  rugged rectangular plastic cases and all come with 5.0 mm (0.197“) lead spacing.  They are good  for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppression. 

## **Highlights** 

- Case and epoxy fill meets UL94V-0 

- 5.0 mm (0.197“) lead spacing 

- Bulk, tape and reel or ammo pack 

- Non-inductively wound 

- Non-polar 

- Low leakage 

- Lead material:  Tinned copper wire 

## **Specifications** 

|**Capacitance Range**|0.001 µF to 1..0 µF|
|---|---|
|**Capacitance Tolerance**|±5%, ±10%, ±20%<br>~~oo~~|
|**Rated Voltage**|50  to 400 Vdc<br>~~oo~~|
|**Operating Temperature Range**|–55 ºC to +125 ºC  (with 50% Vdc derating >85 ºC)<br>~~oo~~|
|**Dielectric Withstand Voltage**|1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC<br>~~oo~~|
|**Dissipation Factor  @ 120 Hz, +25 ºC**|tgδ x 10–4 at +25 ºC ±5 ºC<br>**kHz**<br>**C**≤**0.1µF**<br>**C > 0.1µF**<br>1<br>≤100<br>≤100<br>10<br>≤150<br>≤150<br>100<br>≤300<br>~~oo~~|
|**Total Self Inductance (L)**|Approximately 7nH|
|**Maximum Pulse Rise Time (dv/dt)**|If the working voltage (V) is less than the nominal voltage (Vn), the capaci-<br>tor can work at higher dv/dt.  In this case, the maximum value allowed is<br>obtained by multiplying the above value with the ratio Vn/V.<br>**Vn**<br>**Capacitance**<br>**V/µs**<br>50<br>4<br>63<br>8<br>100<br>C > .0068 µF<br>10<br>.0033 µF < C < .0068 µF<br>15<br>C ≤ .0033 µF<br>30<br>250<br>44<br>400<br>100|
|**Long Term Stability (after two years)**|Capacitance change ∆C/C ≤ ±3%  under standard environmental conditions|
|**Regulatory Information**||



**CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com** 

**Type 168/185  Metallized Polyester Radial Lead Capacitors** 

## **Capacitor Outline Drawing** 

## **Test Method and Performance** 

## **Insulation Resistance** 

## **Test Conditions** 

**==> picture [168 x 118] intentionally omitted <==**

**----- Start of picture text -----**<br>
L T<br>Max Max<br>H<br>Max<br>.217 ±.039<br>ava (5.5 ±1.0 mm)<br>Ød ±.003<br>     S<br>rot       (±0.076)<br>    ±.015<br>(±0.4 mm)<br>**----- End of picture text -----**<br>


Lead length shown is as supplied on the 168 Series 

## **Soldering** 

## **Test Conditions** 

**Soldering Temperature:** 260 ºC ±5 ºC **Soldering Duration:** 10 sec ±1 sec 

**Performance** 

**Capacitance Change** ∆ **C/C:** ≤ ±2% **DF Change** ∆ **tg** δ : ≤ 30 x 10[–4] at 10 kHz **Insulation Resistance:** ≥ limit value 

**Temperature:** 25 ºC ±5 ºC **Voltage Charge Time:** 1 minute **Voltage Charge:** 10 Vdc for Vn < 100 Vdc 100 Vdc for Vn ≥ 100 Vdc **Performance For Vn > 100 Vdc:** C ≤ 0.33 µF, ≥15,000 MΩ C > 0.33 µF, ≥ 5,000 S **For Vn** ≤ **100 Vdc:** C ≤ 0.33 µF, 30,000 MΩ C > 0.33 µF, ≥ 10,000 S **Damp Heat Test Test Conditions Temperature:** +40 ºC **Relative Humidity:** 95% **Test Duration:** 21 days **Performance Capacitance Change** ∆ **C/C:** ±5% **DF Change** ∆ **tg** δ: ≤ 0.005 (10 KHz) **Insulation Resistance:** ≥ 50% of limit value **Life Test Test Conditions** REF **Temperature:** +85 ºC **Test Duration:** 2000 hrs **Voltage Applied:** 1.25 x Vn **Performance Capacitance Change** ∆ **C/C:** ≤ ±2% **DF Change** ∆ **tg** δ: ≤ 30 x 10[–4] at 10 kHz **Insulation Resistance:** ≥ 50% of limit value 

## **Ratings** 

|**Catalog**<br>**Part Number**<br>~~ee~~|**Tape & Reel**<br>**Ammo Pack**<br>~~ee~~|**Cap**<br>**(µF)**<br>~~eee~~|**Inches**<br>~~eee~~|**Inches**<br>~~eee~~|**Inches**<br>~~eee~~|**Inches**<br>~~eee~~|**Inches**<br>~~eee~~|**Millimeters**<br>~~eee~~|**Millimeters**<br>~~eee~~|**Millimeters**<br>~~eee~~|**Millimeters**<br>~~eee~~|**Millimeters**<br>~~eee~~|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||**L**<br>~~eee~~|**T**<br>~~eee~~|**H**<br>~~eee~~|**S**<br>~~eee~~|**Ød**<br>~~eee~~|**L**<br>~~eee~~|**T**<br>~~eee~~|**H**<br>~~eee~~|**S**<br>~~eee~~|**Ød**<br>~~eee~~|
|**50 Vdc**<br>~~ee eeeee~~|||||||||||||
|168104*50A-F<br>168154*50A-F<br>168224*50C-F<br>168334*50C-F<br>168474*50H-F|185104*50#A>-F<br>185154*50#A>-F<br>185224*50#C>-F<br>185334*50#C>-F<br>185474*50#H>-F|0.10<br>0.15<br>0.22<br>0.33<br>0.47|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.098<br>0.098<br>0.138<br>0.138<br>0.138|0.256<br>0.256<br>0.295<br>0.295<br>0.295|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.020<br>0.020<br>0.020|7.2<br>7.2<br>7.2<br>7.2<br>7.2|2.5<br>2.5<br>3.5<br>3.5<br>3.5|6.5<br>6.5<br>7.5<br>7.5<br>7.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168684*50F-F<br>168824*50G-F<br>168105*50G-F<br>~~ee~~|185684*50#F>-F<br>185824*50#G>-F<br>185105*50#G>-F<br>~~ee~~|0.68<br>0.82<br>1.00<br>~~ee~~|0.283<br>0.283<br>0.283<br>~~ee~~|0.236<br>0.236<br>0.236<br>~~ee~~|0.433<br>0.433<br>0.433<br>~~ee~~|0.197<br>0.197<br>0.197<br>~~ee~~|0.024<br>0.024<br>0.024<br>~~ee~~|7.2<br>7.2<br>7.2<br>~~ee~~|6.0<br>6.0<br>6.0<br>~~ee~~|11.0<br>11.0<br>11.0<br>~~ee~~|5.0<br>5.0<br>5.0<br>~~ee~~|0.6<br>0.6<br>0.6<br>~~ee~~|
|**63 Vdc**|||||||||||||
|168473*63A-F<br>168563*63A-F<br>168683*63A-F<br>168823*63A-F<br>168104*63A-F|185473*63#A>-F<br>185563*63#A>-F<br>185683*63#A>-F<br>185823*63#A>-F<br>185104*63#A>-F|0.047<br>0.056<br>0.068<br>0.082<br>0.10|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.098<br>0.098<br>0.098<br>0.098<br>0.098|0.256<br>0.256<br>0.256<br>0.256<br>0.256|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.020<br>0.020<br>0.020|7.2<br>7.2<br>7.2<br>7.2<br>7.2|2.5<br>2.5<br>2.5<br>2.5<br>2.5|6.5<br>6.5<br>6.5<br>6.5<br>6.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168154*63C-F<br>168184*63C-F<br>168224*63C-F<br>168274*63C-F<br>168334*63H-F|185154*63#C>-F<br>185184*63#C>-F<br>185224*63#C>-F<br>185274*63#C>-F<br>185334*63#H>-F|0.15<br>0.18<br>0.22<br>0.27<br>0.33|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.138<br>0.138<br>0.138<br>0.098<br>0.138|0.295<br>0.295<br>0.295<br>0.256<br>0.295<br>~~EE~~|0.197<br>0.197<br>0.197<br>0.197<br>0.197<br>~~EE~~|0.020<br>0.020<br>0.020<br>0.020<br>0.020<br>~~EE~~|7.2<br>7.2<br>7.2<br>7.2<br>7.2<br>~~EE~~|3.5<br>3.5<br>3.5<br>2.5<br>3.5|7.5<br>7.5<br>7.5<br>6.5<br>7.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168474*63H-F<br>168684*63F-F<br>168105*63G-F<br>~~tL~~|185474*63#H>-F<br>185684*63#F>-F<br>185105*63#G>-F<br>~~tL~~|0.47<br>0.68<br>1.00<br>~~tL~~|0.283<br>0.283<br>0.283<br>~~tL~~|0.138<br>0.177<br>0.236<br>~~tL~~|0.295<br>0.374<br>0.433<br>~~tL~~<br>~~EE~~|0.197<br>0.197<br>0.197<br>~~tL~~<br>~~EE~~|0.020<br>0.024<br>0.024<br>~~tL~~<br>~~EE~~|7.2<br>7.2<br>7.2<br>~~tL~~<br>~~EE~~|3.5<br>4.5<br>6.0<br>~~tL~~|7.5<br>9.5<br>11.0<br>~~tL~~|5.0<br>5.0<br>5.0<br>~~tL~~|0.5<br>0.6<br>0.6<br>~~tL~~|



**CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com** 

## **Type 168/185  Metallized Polyester Radial Lead Capacitors** 

|**Catalog**<br>**Part Number**|**Tape & Reel**<br>**Ammo Pack**|**Cap**<br>**(µF)**|**Inches**|**Inches**|**Inches**|**Inches**|**Inches**|**Millimeters**|**Millimeters**|**Millimeters**|**Millimeters**|**Millimeters**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||**L**|**T**|**H**|**S**|**Ød**|**L**|**T**|**H**|**S**|**Ød**|
||||**100 Vdc**||||||||||
|168102*100A-F<br>168152*100A-F<br>168222*100A-F<br>168272*100A-F<br>168332*100A-F|185102*100#A>-F<br>185152*100#A>-F<br>185222*100#A>-F<br>185272*100#A>-F<br>185332*100#A>-F|0.0010<br>0.0015<br>0.0022<br>0.0027<br>0.0033|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.098<br>0.098<br>0.098<br>0.098<br>0.098|0.256<br>0.256<br>0.256<br>0.256<br>0.256|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.020<br>0.020<br>0.020|7.2<br>7.2<br>7.2<br>7.2<br>7.2|2.5<br>2.5<br>2.5<br>2.5<br>2.5|6.5<br>6.5<br>6.5<br>6.5<br>6.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168392*100A-F<br>168472*100A-F<br>168562*100A-F<br>168682*100A-F<br>168822*100A-F|185392*100#A>-F<br>185472*100#A>-F<br>185562*100#A>-F<br>185682*100#A>-F<br>185822*100#A>-F|0.0039<br>0.0047<br>0.0056<br>0.0068<br>0.0082|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.098<br>0.098<br>0.098<br>0.098<br>0.098|0.256<br>0.256<br>0.256<br>0.256<br>0.256|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.020<br>0.020<br>0.020|7.2<br>7.2<br>7.2<br>7.2<br>7.2|2.5<br>2.5<br>2.5<br>2.5<br>2.5|6.5<br>6.5<br>6.5<br>6.5<br>6.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168103*100A-F<br>168153*100A-F<br>168183*100A-F<br>168223*100A-F<br>168273*100A-F|185103*100#A>-F<br>185153*100#A>-F<br>185183*100#A>-F<br>185223*100#A>-F<br>185273*100#A>-F|0.010<br>0.015<br>0.018<br>0.022<br>0.027|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.098<br>0.098<br>0.098<br>0.098<br>0.098|0.256<br>0.256<br>0.256<br>0.256<br>0.256|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.020<br>0.020<br>0.020|7.2<br>7.2<br>7.2<br>7.2<br>7.2|2.5<br>2.5<br>2.5<br>2.5<br>2.5|6.5<br>6.5<br>6.5<br>6.5<br>6.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168333*100C-F<br>168393*100C-F<br>168473*100C-F<br>168683*100H-F<br>168104*100H-F|185333*100#C>-F<br>185393*100#C>-F<br>185473*100#C>-F<br>185683*100#H>-F<br>185104*100#H>-F|0.033<br>0.039<br>0.047<br>0.068<br>0.10|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.098<br>0.098<br>0.098<br>0.098<br>0.098|0.256<br>0.256<br>0.256<br>0.256<br>0.256|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.020<br>0.020<br>0.020|7.2<br>7.2<br>7.2<br>7.2<br>7.2|2.5<br>2.5<br>2.5<br>2.5<br>2.5|6.5<br>6.5<br>6.5<br>6.5<br>6.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168154*100F-F<br>168224*100G-F|185154*100#F>-F<br>185224*100#G>-F|0.15<br>0.22|0.283<br>0.283|0.177<br>0.197|0.374<br>0.394|0.197<br>0.197|0.024<br>0.024|7.2<br>7.2|4.5<br>5.0|9.5<br>10.0|5.0<br>5.0|0.6<br>0.6|
||||**250 Vdc**||||||||||
|168332*250A-F<br>168472*250A-F<br>168682*250A-F<br>168103*250A-F<br>168153*250A-F|185332*250#A>-F<br>185472*250#A>-F<br>185682*250#A>-F<br>185103*250#A>-F<br>185153*250#A>-F|0.0033<br>0.0047<br>0.0068<br>0.010<br>0.015|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.098<br>0.098<br>0.098<br>0.098<br>0.098|0.256<br>0.256<br>0.256<br>0.256<br>0.256|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.020<br>0.020<br>0.020|7.2<br>7.2<br>7.2<br>7.2<br>7.2|2.5<br>2.5<br>2.5<br>2.5<br>2.5|6.5<br>6.5<br>6.5<br>6.5<br>6.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168223*250C-F<br>168333*250C-F<br>168473*250F-F<br>168683*250F-F<br>168104*250G-F|185223*250#C>-F<br>185333*250#C>-F<br>185473*250#F>-F<br>185683*250#F>-F<br>185104*250#G>-F|0.022<br>0.033<br>0.047<br>0.068<br>0.100|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.138<br>0.138<br>0.177<br>0.177<br>0.197|0.295<br>0.295<br>0.374<br>0.374<br>0.394|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.024<br>0.024<br>0.024|7.2<br>7.2<br>7.2<br>7.2<br>7.2|3.5<br>3.5<br>4.5<br>4.5<br>5.0|7.5<br>7.5<br>9.5<br>9.5<br>10|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.6<br>0.6<br>0.6|
||||**400 Vdc**||||||||||
|168102*400A-F<br>168152*400A-F<br>168222*400A-F<br>168332*400C-F<br>168472*400C-F|185102*400#A>-F<br>185152*400#A>-F<br>185222*400#A>-F<br>185332*400#C>-F<br>185472*400#C>-F|0.001<br>0.0015<br>0.0022<br>0.0033<br>0.0047|0.283<br>0.283<br>0.283<br>0.283<br>0.283|0.098<br>0.098<br>0.098<br>0.098<br>0.098|0.256<br>0.256<br>0.256<br>0.256<br>0.256|0.197<br>0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.020<br>0.020<br>0.020|7.2<br>7.2<br>7.2<br>7.2<br>7.2|2.5<br>2.5<br>2.5<br>2.5<br>2.5|6.5<br>6.5<br>6.5<br>6.5<br>6.5|5.0<br>5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.5<br>0.5<br>0.5|
|168682*400C-F<br>168103*400F-F<br>168153*400F-F<br>168223*400G-F|185682*400#C>-F<br>185103*400#F>-F<br>185153*400#F>-F<br>185223*400#G>-F|0.0068<br>0.010<br>0.015<br>0.022|0.283<br>0.283<br>0.283<br>0.283|0.138<br>0.138<br>0.177<br>0.197|0.295<br>0.295<br>0.374<br>0.394|0.197<br>0.197<br>0.197<br>0.197|0.020<br>0.020<br>0.024<br>0.024|7.2<br>7.2<br>7.2<br>7.2|3.5<br>3.5<br>4.5<br>5.0|7.5<br>7.5<br>9.5<br>10|5.0<br>5.0<br>5.0<br>5.0|0.5<br>0.5<br>0.6<br>0.6|



*  Indicates capacitance tolerance:  J = ±5%, K = ±10%, M = ±20% #  Indicates packaging type:  R = Tape and Reel, A = Ammo Pack >  Indicates tooling code:  A = 16.5 mm, B = 18.5 mm (See H dimension in taping specification) 

**CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com** 

## **Type 168/185  Metallized Polyester Radial Lead Capacitors Tape Specification - 5.0 mm Lead Spacing Standard EIA-468-B** : 301.18"mm 

|**Item**|**Code **|**Millimeters**|**Inches**|
|---|---|---|---|
|Lead-to-Lead Distance<br>Feed Hole Pitch<br>Pitch of Component<br>Hole Center to Lead<br>Feed Hole Center to<br>Component Center|P<br>P0<br>P1<br>P2<br>P3|5.0+0.6 –0.2<br>12.7±0.3<br>12.7±1.0<br>2.54±0.7<br>6.35±1.3|.197+.024 –.040<br>.5±.012<br>.5±.039<br>.100±.028<br>.250±.051|
|Component Alignment, F-R<br>Tape Width<br>Hold-down Tape Width<br>Hole Position<br>Hold-down Tape Position|∆h<br>W<br>W0<br>W1<br>W2|0±2.0<br>18+1.0 –0.1<br>6.0 min<br>9.0+0.75 –0.05<br>3.0 Max|0±.079<br>.709+.039 –.004<br>.236 min<br>.355+.030 –.001<br>.118 Max|
|Height of Component<br>from Tape Center<br>Feed Hole Diameter|H<br>D0|><br>4.0±0.3|><br>.157±.012|



|**Case**|||
|---|---|---|
|**Thickness**<br>**T**<br>2.5|**Quantity**<br>**Reeled**<br>2500|**Quantity**<br>**Ammo Pack**<br>2000|
|3.5|1800|1500|
|4.5|1400|1300|
|5|1200|1000|
|6|1000|800|



>  The H dimension depends on the insertion equipment  used.  Specify the proper tooling code as indicated below. 

|below.|||
|---|---|---|
|**Tooling**|**H Dimensions**||
|**Code**|**Millimeters**|**Inches**|
|A<br>B|16.5±0.75<br>18.5±0.75|.679±0.030<br>.728±0.030|



## **Part Numbering System for Auto Insertion** 

**==> picture [415 x 143] intentionally omitted <==**

**----- Start of picture text -----**<br>
168/185 104 K 100 (#) H (>) –F<br>Packaging *Tooling RoHS<br>Type Internal Code Compliant<br>Series Capacitance  Tolerance Voltage Code Designation<br>185 102 = .001 µF J = ±5% 50 = 50 Vdc A = Ammo Letter A<br>103 = .01 µF K = ±10% 63 = 63 Vdc R = Tape & Reel B<br>104 = .1 µF M = ±20% 100 = 100 Vdc Blank = Bulk Blank = Bulk<br>105 = 1.0 µF 250 = 250 Vdc<br>400 = 400 Vdc<br>**----- End of picture text -----**<br>


* Tooling code (>) depends on the users insertion equipment requirements.  See table for available options. 

**CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com** 

**Type 168/185  Metallized Polyester Radial Lead Capacitors** 

**Notice and Disclaimer:** All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements  (“Cornell Dubilier”) has of  operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of  any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained.  Although Cornell Dubilier strives to apply  the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 

**CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com**