16.000MHZ XO91050UITA

## _EURO_ QUARTZ 

## **XO91 Series Oscillators** 

## **7 x 5mm SMD HCMOS** 

**Miniature 7.0 x 5.0 x 1.4mm hermetically-sealed package Frequency Range 500kHz to 125MHz Tristate (Enable/Disable) function as standard Supply voltage range 1.8, 2.5, 3.3 or 5.0 Volts** 

## **DESCRIPTION** 

## **OUTLINE & DIMENSIONS** 

## **Page 1 of 2** 

XO91miniature oscillators consist of a TTL/CMOS-compatible hybrid circuit together with a miniature quartz crystal packaged in a lowprofile, industry-standard ceramic package. The high quality design and materials employed provide a highly reliable clock oscillator in a miniature package while mass production methods ensure that the XO91 provides a cost-effective oscillator solution. 

## **SPECIFICATION** 

|Frequency Range:|500kHz to 125.0MHz|
|---|---|
|Supply Voltage:|1.8, 2.5, 3.3 or 5.0 Volts ±10%|
|Output Logic:|HCMOS/LSTTL|
|Frequency Stability*||
|Temperature Range|Stability|
|0° to +50°C:|from ±10ppm|
|-20° to +70°C:|from ±15ppm|
|-40 to +85°C:|from ±25ppm|
|-55° to +105°C:|from ±100ppm|
|Rise/Fall Time:|_see table_|
|Output Voltage:||
|HIGH ‘1’:|90%Vdd minimum|
|LOW ‘0’:|10%Vdd maximum|
|Output Load||
|CMOS:|15pF (50pF available)|
|TTL:|10 LSTTL loads|
|Duty Cycle:|50%±5% typical|
|Supply Current:|_See table_|
|Operating Temperature||
||0~50°C (Light Commercial)|
||0~70°C (Commercial)|
||-40~+85 (Industrial)|
||-55~+105°C (Military)|
|Storage Temperature:|-55~+105°C|
|Startup Time||
|500kHz to 32MHz:|5ms max.|
|32MHz+ to 125MHz:|10ms max.|
||(to reach 90% amplitude at 25±2°C)|
|Ageing:|±5ppm max. In first year|
|Phase Jitter RMS:|<1ps typical|
|Enable Time:|100ms max.|
|Disable Time:|100ns max.|
|Tristate Function (Pad 1):||
|Output (Pad 3) is active if Pad 1 is not connected or a||
|voltage to Pad 1 is 'HIGH'. Output  is high impedance||
|when 'LOW' or GROUND is applied to Pad 1.||



**SOLDER TEMPERATURE PROFILE** 

* Frequency stability is inclusive of calibration tolerance at 25°C, frequency change due to shock & vibration, ±10 supply voltage variation and stability over temperature range. 

_Note: Parameters are measured at ambient temperature of 25°C, supply voltage as stated and a load of 15pF_ 

## **CURRENT CONSUMPTION & RISE/FALL TIME** 

**Supply Voltage (±10%) Frequency Range +1.8V +2.5V +3.3V +5.0V Rise/Fall Time** 500kHz to 32MHz 8mA 10mA 15mA 25mA 4ns max. 32MHz+ to 50MHz 10mA 14mA 16.5mA 35mA 3ns max. 40MHz+ to 125MHz 25mA 30mA 35mA 40mA 2ns max. 

**EUROQUARTZ LIMITED  Blacknell Lane  CREWKERNE  Somerset  UK  TA18 7HE Tel: +44 (0)1460 230000  Fax: +44 (0)1460 230001  Email: info@euroquartz.co.uk  www.euroquartz.co.uk** 

**XO91 Series Oscillators** 

## _EURO_ QUARTZ 

# **7 x 5mm SMD HCMOS** 

## **Page 2 of 2** 

## **ENVIRONMENTAL PERFORMANCE SPECIFICATION** 

|RoHS Status:|Compliant|
|---|---|
|Storage Temperature Range: -50° to +100°C||
|Humidity:|85% RH, 85°C for 48 hours|
|Hermetic Seal:|Leak rate 2x10-8ATM -cm3/s max.|
|Solderability:|MIL-STD-202F Method 208E|
|Reflow:|260°C for 10 sec (see diagram)|
|Vibration:|MIL-STD-202F Method 204, 35g,|
||50 to 2000Hz|
|Shock:|MIL-STD-202F Method 213B, test|
||Condition E, 1000g ½ sinewave|



## **PART NUMBERING** 

Example: 16.000MHz  XO91050UCTA 

Frequency Series Designation XO91 Stability* 100 = ±100ppm 50 = ±50ppm 25 = ±25ppm Output Universal Operating Temp. Range C = 0+70°C D = -20~+70°C I = -40~+85°C M = -55~+105°C Tristate Function Supply Voltage Blank = 5.0 Volts A = 3.3 Volts B = 2.5 Volts C = 1.8 Volts 

_* For other stability requirements enter figure required._ 

**EUROQUARTZ LIMITED  Blacknell Lane  CREWKERNE  Somerset  UK  TA18 7HE Tel: +44 (0)1460 230000  Fax: +44 (0)1460 230001  Email: info@euroquartz.co.uk  www.euroquartz.co.uk**