15DYS836-240166W-FX

AC/DC Power Supply, ITE, 1 Output, 40 W, 24 VDC, 1.66 A

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: IDEAL POWER
Product type: AC / DC External Plug In Adaptor Power Supplies
SVHC: No SVHC (04-Feb-2026)
Plug Type: -
Product Range: 15DYS836-xyW-2.5 Series
No. of Outputs: 1 Output
Output Connector: 2.1mm x 5.5mm x 12mm
Output Power Max: 40W
Input Voltage VAC: 90V AC to 264V AC
Power Supply Output Type: Fixed
Output Current - Output 1: 1.66A
Output Current - Output 2: -
Output Current - Output 3: -
Output Voltage - Output 1: 24VDC
Output Voltage - Output 2: -
Output Voltage - Output 3: -
Power Supply Applications: ITE
Delivery and price
Units per pack	3
Price	12.88 €
Current stock	10+
Lead time	30 days
Datasheet
**2** 222 **SPECIFICATION FOR APPROVAL 2** 222 

CUSTOMER/客户 : 01097 ARTICLE/品名: SWITCHING MODE POWER SUPPLY SPECIFICATION /规格: UL/GS/CE/SAA Desktop/桌面式 MODEL NO/产品型号. : DYS836-240166W 

OUR PART NO./产品编号: DYS836-240166-19A04B CUSTOMER P. N/客户料号: 15DYS40-240166W-FX 

INPUT/输入 :             100-240V AC 50/60Hz OUTPUT/输出:            24.0V   DC  1.66A INPUT/输入 :             100-240V AC 50/60Hz REV/DATE:/版本/日期：    02      2019/11/28 

|Vendor Confirmation/供应商确认|Vendor Confirmation/供应商确认|Vendor Confirmation/供应商确认|Confirmation  Approved/客户确认|Confirmation  Approved/客户确认|Confirmation  Approved/客户确认|
|---|---|---|---|---|---|
|Made by|Checked by|Approved by|Made by|Checked by|Approved by|
|Liuhuixian|Liufei|Wuguoming||||
|Remark/备注：||||||



## **IDEAL POWER LTD** 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

|Rev.<br>版本<br>~~__~~<br>~~a~~|Description of Change/变更内容描述<br>~~__de~~|Description of Change/变更内容描述<br>~~__de~~|Changed<br>Date/日期<br>~~de~~<br>~~es~~|Operator/<br>执行者<br>~~de~~<br>~~es~~|
|---|---|---|---|---|
||Before/变更前<br>~~__de~~<br>~~ee~~<br>~~ee~~|After/变更后<br>~~de~~<br>~~ee~~<br>~~es~~|||
|01<br>~~__~~<br>~~a~~<br>~~a~~|Original Release(初次发行)<br>~~__~~<br>~~ee~~<br>~~ee~~|~~es~~<br>~~ee~~|2019/10/04<br><br>~~es~~|Liuhuixian<br><br>~~es~~|
|02<br>~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>~~ee~~|Update Marking Drawing<br>~~es~~<br>~~ee~~<br>~~ee~~|2019/11/28<br>~~es~~<br>~~ee~~|Liuhuixian<br>~~es~~<br>~~ee~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~ee~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~ee~~|
|~~a~~<br>~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~Gs~~|~~ee~~<br>~~Gs~~<br>~~ee~~|~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~|~~Gs~~|~~Gs~~<br>~~ee~~|~~Gs~~|
|~~a~~<br>~~aa~~<br>~~a~~|~~ee~~<br>~~ee~~|~~Gs~~<br>~~Gs~~|~~Gs~~<br>~~ee~~<br>~~Gs~~<br>~~ee~~|~~Gs~~<br>~~Gs~~|
|~~a~~<br>~~a~~|~~ee~~|~~Gs~~|~~Gs~~<br>~~ee~~|~~Gs~~|
|~~a~~<br>~~a~~|~~ee~~|~~Gs~~|~~Gs~~<br>~~ee~~|~~Gs~~|
|~~aa~~<br>~~a~~|~~ee~~|~~Gs~~|~~ee~~<br>~~Gs~~<br>~~ee~~|~~Gs~~|
|~~a~~<br>~~a~~|~~ee~~|~~Gs~~|~~Gs~~<br>~~ee~~|~~Gs~~|
|~~a~~<br>~~aa~~|~~ee~~<br>~~ee~~|~~Gs~~<br>~~en~~|~~Gs~~<br>~~ee~~<br>~~en~~|~~Gs~~<br>~~en~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~|~~en~~<br>~~Gs~~|~~en~~<br>~~Gs~~<br>~~es~~|~~en~~<br>~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~|~~en~~<br>~~Gs~~|~~en~~<br>~~Gs~~<br>~~es~~|~~en~~<br>~~Gs~~|
|~~a~~<br>~~aa~~<br>~~a~~|~~ee~~<br>~~ee~~|~~Gs~~<br>~~Gs~~|~~Gs~~<br>~~es~~<br>~~Gs~~<br>~~es~~|~~Gs~~<br>~~Gs~~|
|~~a~~<br>~~a~~|~~ee~~|~~Gs~~|~~Gs~~<br>~~es~~|~~Gs~~|
|~~a~~<br>~~a~~|~~ee~~|~~Gs~~|~~Gs~~<br>~~es~~|~~Gs~~|
|~~aa~~<br>~~a~~|~~ee~~|~~Gs~~|~~es~~<br>~~Gs~~<br>~~es~~|~~Gs~~|
|~~a~~<br>~~a~~|~~ee~~|~~Gs~~|~~Gs~~<br>~~es~~|~~Gs~~|
|~~a~~<br>~~aa~~|~~ee~~<br>~~ee Se~~|~~Gs~~<br>~~Se~~|~~Gs~~<br>~~es~~|~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee Se~~<br>~~ee~~|~~Se~~<br>~~Gs~~|~~Gs~~<br>~~en~~|~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~<br>~~a~~|~~ee Se~~<br>~~ee~~<br>~~re~~|~~Se~~<br>~~Gs~~|~~Gs~~<br>~~en~~|~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~re~~<br>~~ee~~<br>|~~Gs~~<br>~~Gs~~<br>|~~Gs~~<br>~~en~~<br>~~Gs~~<br>~~en~~<br>|~~Gs~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~<br>~~a~~|~~re~~<br>~~ee~~<br>~~ee~~<br>|~~Gs~~<br>~~ee~~<br>|~~Gs~~<br>~~en~~<br>~~ee~~<br>|~~Gs~~<br>~~ee~~<br>|
|~~a ~~<br>~~a~~|~~ee~~<br> ~~ee~~<br>|~~Gs~~<br>~~ee~~<br>|~~Gs~~<br>~~en~~<br>~~ee~~<br>|~~Gs~~<br>~~ee~~<br>|
|<br>~~a~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|



## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## CONTENTS/ 目录 

||CONTENTS/目录|
|---|---|
|1|Compendium/简述…………………………………………………………………………….…. ….…. ……….…..….....4|
|2|Input Characteristics/输入特性………………………….………………………….. ….…. ……….….………….…..….4|
||2.1<br>Input Voltage & Frequency/输入电压&频率……..………………………………….…. ……….….……….…..….4|
||2.2<br>Input AC Current/AC 输入电流…..……………………………………………..…….…. ……….….……….…..….4|
||2.3<br>Inrush Current (Cold Start)/浪涌电流(冷启动)…….………………….…………….…. ……….….……….…......4|
||2.4<br>Efficiency (Normal)/效率(额定输入)…………………………………..…….………. ……….….……….…..…….4|
||2.5<br>Energy Consumption /空载功耗………………………………………………….. ….…. ……….……….…..……..4|
|3|Output Characteristics/输出特性…………………………………………………...…………….…. ……….….….….....5|
||3.1<br>Static Output Characteristics <Vo & R+N>/静态输出特性………..……...….…….…. ……….….…….…..…....5|
||3.2<br>Line / Load Regulation/线性/负载调整率…...………….……………..……………….…. …….….…….….. .….5|
||3.3<br>Turn on Delay Time/开机延迟时间…………………………………….…………. ………….….….….…….…..…5|
||3.4<br>Hold up Time/关机维持时间…………………………………………………..……….…. ……….….…….…..…...5|
||3.5<br>Capacitance Load/容性负载………………………………………………………..……….…. …….….…….……..5|
||3.6<br>Output Overshoot / Undershoot/输出过冲/欠冲……………………………………….….…….…..….….…….....5|
||3.7<br>Output Load Transient Response/输出负载瞬态响应…..…………….……………….….…….…..……….…….5|
|4|Protection Requirements/保护特性……………………………………………..…………….….…….…..………….......6|
||4.1<br>Over Current Protection/过流保护………………………………………………………….….…….…..……..…....6|
||4.2<br>Short Circuit Protection/短路保护………………………………...………………………….….…….…..…...........6|
||4.3<br>Over Voltage Protection/过压保护…………………………………………………………….….…….…...………..6|
||4.4<br>LPS/限功率源…………………………………………………………….….…….…... .…. .…. .…. .…. .….………6|
|5|Environment Requirements/环境要求.…….……….…….……………………….….. …………….….…….…..………6|
||5.1<br>Operating Temperature and Relative Humidity/操作温/湿度要求…………...…. ………….….…….…..……....6|
||5.2<br>Storage Temperature and Relative Humidity/存储温/湿度要求……..……...…………….….…….…..……..…..6|
||5.3<br>Vibration/振动……………………………………………..……………….………………….….…….…..……….....6|
|6|Reliability Requirements/可靠性要求………………………………………………………………………………………6|
||6.1<br>Burn-in/煲机………………………………………………………………………….….…….…...….. ………………6|
||6.2<br>MTBF Qualification/平均间隔故障时间估算………………………………...……………………………….............7|
|7|EMI/EMS Standards/EMI/EMS 标准………………………………………………………………………………………….7|
||7.1<br>EMI Standards/EMI 标准…………….………………………………….….…….…...…….......................................7|
||7.2<br>EMS Standards/EMS 标准……………………………………………………………………………….….…….…….7|
|8|Safety Standards/安规标准………………………………….…..……………………………………….….………….…….8|
|8.1|8.1Safety Accord with/安全:符合标准………………………………..……………………………………………………...8|
|8.2|8.2Dielectric Strength(Hi-pot)/介电耐压强度(高压)………………...………………………………………………….…8|
||8.3Leakage Current/漏电流…………………………………………...………………………...........................................8|
||8.4Insulation Resistance/绝缘阻抗…………………………………...………………………….......................................8|
|9|9Outline Drawing/外观示意图:……………………………….......……………………………............................................9|
|10|10DC Cord Drawing/DC 线示意图: ……………………………..…………………………………….………………….....10|
|11|11Marking Drawing/铭牌示意图:……………………………………………………………...............................................11|
|12|12Package Drawing/包装示意图:……………………………………………………………..............................................12|



3 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## **1.Compendium/** 简述 

The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 39.84 W continuous output power. 

资料详细描述了一款 **39.84 W(** 连续输出功率 **)** 开关电源的电气性，结构性及环境等要求 . The power supply shall meet the RoHS requirements. 此款电源符合 **RoHS** 要求 **.** 

## **1.1 Description/** 描述 

Z 插墙式适配器 SMPS Adapter(Interchangeable)/ 0 可换头适配器 桌面型适配器 Open Frame/ 开放式结构 Oo Zz 带铁壳型 Others/ 其他 

## **2. Input Characteristics/** 输入特性 

## **2.1 Input Voltage & Frequency/** 输入电压与频率 

The range of input voltage is from 90Vac to 264Vac with a single phase. Input voltage AC 280V can not be damaged during testing. 

输入电压范围：从 **90Vac** 到 **264Vac,** 单相输入；输入电压 **AC280V** 测试时不能损坏 **.** 

||Minimum/最小|Nominal/额定值|Maximum/最大|
|---|---|---|---|
|Input Voltage/输入电压|90Vac|100Vac~240Vac|264Vac|
|Input Frequency/输入频率|47Hz|60Hz/50Hz|63Hz|



## **2.2 Input AC Current/AC** 输入电流 

1.0Amax @ 100-240Vac input & Full load/ 在 **100 – 240 Vac** 输入和满载条件下最大 **1.0A** 有效值 

## **2.3 Inrush Current (cold start)/** 浪涌电流 **(** 冷启动 **)** 

The inrush current will not exceed 60A at 100-240Vac input and Max load for a cold start at 25 `℃` 

在100-240V 交流电输入和最大负载冷启动环境25℃时浪通电流不能超过 60A 

## **2.4 Average Efficiency/** 平均效率 

While input 115Vac and 230Vac, the average efficiency is more than 87.58%. The test point is at 25%, 50%, 75% and 100% of max load respectively. `在输入` **115Vac** `和` **230Vac** `条件下，平均效率不小于` **87.58%** `。 测试点分别是最大载的` **25%,50%,75%** `和` **100%** `。` 

## **2.5 Energy Consumption /** 空载功耗 

4 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

While input 115Vac or 230Vac and the output is no load,the input power loss must be less than 0.1W 

在输入 **115Vac/230Vac** 时 **,** 空载功耗小于 **0.1W** 

## **3. Output Characteristics/** 输出特性 

## **3.1 Static Output Characteristics <Vo & R+N>/** 静态输出特性 **<** 输出 **&** 纹波 **+** 噪音 **>** 

|Output|Rated Load/额定负载|Rated Load/额定负载|Rated Load/额定负载|Output Range<br>输出电压范围|R+N<br>纹波与噪声|Remark<br>备 注|
|---|---|---|---|---|---|---|
|Rate|Min. Load|Max. Load|||||
|+24V|0.0A|1.66A||22.8V-25.2V|240mVp-p||



Ripple & Noise: Measurement is done by 20MHz bandwidth oscilloscope and the outputparalleled 

a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor. 

(test under the condition of rated input and rated output) 

纹波与噪声 **:** 量测时示波器选用 **20MHz** 带宽限制 **,** 输出端要并联一颗 **0.1uF** 的陶瓷电容和一颗 **10uF** 的电 解电容 **.** (在额定输入及输出的条件下检测) 

## **3.2 Line/ Load Regulation/** 线性 **/** 负载调整率 

|Output|Load Condition/负载条件|Load Condition/负载条件|Line Regulation<br>线性调整率|Load Regulation<br>负载调整率|Remark<br>备 注|
|---|---|---|---|---|---|
|Rate|Min. Load|Max. Load||||
|+24V|0.0A|1.66A|3%|5%||



## **3.3 Turn - on Delay Time/** 开机延迟时间 

3S max. @ 100 Vac to 240 Vac input & Full load 

在 **100Vac** 到 **240Vac** 输入和满载条件下最大 **3S** 

## **3.4 Hold-up Time/** 关机维持时间 

5mS min. @ Full load &100Vac/60Hz input turn off at worst case 

在 **100Vac** 输入 **,** 满载同时最差情况下关机，最小 **5mS** 

## **3.5 Capacitance Load/** 容性负载 

While input 100~240Vac and capacitance load is 470uF, the adapter can turn on normally and the output is in the rated range. 在输入 **100~240Vac** ， **470uF** 容性负载条件下，适配器能正常开机。 并且输出电压范围在额定范围下。 

## **3.6 Output Overshoot / Undershoot/** 输出过冲 **/** 欠冲 

10% max. When the power on or off 

当电源开/关机时,10%最大 

5 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## **3.7 Output Load Transient Response/** 输出负载瞬态响应 

the output shall not exceed 10% of the nominal output voltage, load flunctuation: from 20% to 80%, R/S: 0.5A/uS, frequency: 100Hz duration and 8mS at 80%. 

输出电压不能超过额定电压的 **10%,** 负载变化 **:** 从 **20%** 到 **80%,** 斜率 **: 0.5A/uS,** 频率 **: 100Hz, 80%** 负载持续时间为 **8mS.** 

## **4. Protection Requirements/** 保护要求 

## **4.1 Over Current Protection/** 过流保护 

Over Current Point Limited/ `过流点限制：` I `＞` **2.16A** 

The output shall hiccup when the over currents applied to the output rail, and shall be self-recovery when the fault condition is removed 

`当过电流时，输出将进入打嗝模式，当过流情况解除后，产品将会自动恢复正常` 

## **4.2 Short Circuit Protection/** 短路保护 

The input power shall decrease when the output rail short, the power supply shall no 

damage, and shall be self-recovery when the fault condition is removed 

当输出短路时 **,** 产品输入功率降低且不会损伤 **,** 当短路情况解除后 **,** 产品将会自动恢复正常 

## **4.3 Over Voltage Protection/** 过压保护 

The power supply shall protection when the output over voltage `。` 

`当输出发生过压时，产品进入保护模式.` 

## **4.4 LPS(Limited Power Source)/** 限功率源 

The output power is no more than 100VA, and the output current does not exceed 8A. `。 输出功率不超过100VA，输出电流不超过8A.` 

## **5. Environment Requirements/** 环境要求 

## **5.1 Operating Temperature and Relative Humidity/** 操作温 **/** 湿度要求 

0°C to +40°C 

10%RH to 90%RH 

## **5.2 Storage Temperature and Relative Humidity/** 存储温 **/** 湿度要求 

-20°C to +80°C 

5%RH to 95%RH non-condensing @ Sea level shall be low 10,000 feet/ 低于 **10,000** 英尺 

## **5.3 Vibration/** 振动 

10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for 

each of the perpendicular axes X, Y, Z 

6 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

扫描频率 **: 10 to 300Hz,** 加速度 **: 1.0G(** 位移 **: 3.5mm), X, Y, Z** 三垂直坐标轴向各振动 **1** 小时 

## **6.Reliability Requirements/** 可靠性要求 

## **6.1 Burn-in/** 煲机 

The power supply shall be burn-in at least 4 Hours under normal input and 

80% rated load at 40 ℃[] 5 ℃ 

产品至少要在 **40** ℃[] **5** ℃的环境及 **80%** 以上额定负载条件下煲机 **4** 小时 

## **6.2 MTBF Qualification/** 平均间隔故障时间估算 

The MTBF shall be at least 50,000hours at 25°C, Full load and nominal 

input condition 

平均间隔故障时间 **:** 至少 **50,000** 小时 **,25** °C 环境及额定输入与满载条件下 

## **7. EMI/EMS Standards/EMI/EMS** 标准 

## **7.1  EMI Standards/EMI** 标准 

`FCC Part15 class B` 

> `EN55032` L] `EN55014-1` LJ `EN61204-3(CISPR 22) AS/NZS CISPR22 AS/NZS CISPR13 AS/NZS CISPR14.1` LC] L] `GB9254 GB13837 GB17625.1` LC] L] 

> `J55022` Xx `J55013` L] `J55014-1 KN22 KN13 KN14-1` LC] L] `CNS13438` 

## **7.2  EMS Standards/EMS** 标准 

`EN55035 EN55020 EN55014-2 EN61204-3` LC] L] LJ 

7.2.1  IEC 61000-4-2, electrostatic discharge(ESD) requirement/ 静电抗扰度要求 

|Discharge characteristic/静电规格||Test level/测试条件|Test level/测试条件|Test criteria/测试标准|
|---|---|---|---|---|
|Air discharge/空气放电||+/-8KV||B|
|Contact discharge/接触放电||+/-4 KV||B|
|7.2.2  IEC 61000-4-4,electric fast transients(EFT)immunityrequirement/电快速瞬变脉冲群|||||
|Coupling/测试端口|Test level/测试条件|||Test criteria/测试标准|
|AC-input/交流输入||0.5KV||A|
|AC-input/交流输入||1KV||B|



7.2.3  IEC 61000-4-5, surge capability requirement/ 浪涌抗扰度要求 

7 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

Surge voltage/ 雷击电压 Test criteria/ 测试标准 Differential mode/ 差模 +/-2KV A Common mode/ 共模 +/-4KV 

## **7.2.4 Assessment criteria /** 评估标准 

|Acceptable criteria<br>可接受标准|Performance<br>性能|
|---|---|
|A|Performance is not allowed to be changed, any changes should be<br>within the specified limits<br>性能不允许变化；如果性能会发生变化，则变化的范围在产品规格书规<br>定的范围内.|
|B|During the testing process, the performance degradation is allowed<br>within the specifications of the product specification. After the<br>elimination, the equipment can return to normal and no reset or any<br>manual intervention is allowed. .<br>设备在测试过程中,性能降低允许在产品规格书要求范围内,干扰消除<br>后,设备能恢复正常,不允许出现复位和任何方式的人工干预.|



## **8. Safety Standards/** 安规标准 

## **8.1 Safety Accord with/** 安全 **:** 符合标准 

`UL60950-1,CSA C22.2 NO.60950-1 UL62368-1,CSA C22.2 NO. 62368-1` 

`UL1310 IEC60950-1` Xx] `IEC62368-1` L] `IEC61558-1,IEC61558-2-16 EN60950-1` Xx] `EN62368-1` L] `EN61558-1,EN61558-2-16 AS/NZS 60950.1` Xx] `AS/NZS 62368.1` L] `AS/NZS 61558.1,AS/NZS 61558.2.16 GB4943.1` LJ `GB8898 J60950-1` Xx] `J62368-1` L] `J61558-1,J61558-2-16 K60950-1` LJ `K60065 CNS14336-1 CNS14408` 

Note: AC pins corresponding to relative national standards. `注：相应的AC 插脚对应相应国家的标准.` 

8 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## **8.2 Dielectric Strength(Hi-pot)/** 介电耐压强度 **(** 高压 **)** 

Primary to Secondary: 4242VDC / 5mAMax / 60second(3 seconds for mass production) 初级对次级 **: 4242VDC / 5mAMax / 60** 秒 **(** 生产时高压测试时间 **: 3** 秒 **)** 

## **8.3 Leakage Current/** 漏电流 

- 0.25mAmax. at 264Vac / 50Hz / 在 **264Vac / 50Hz** 输入时，最大漏电流 **0.25mA** 

## **8.4 Insulation Resistance/** 绝缘阻抗 

50MΩ min. at primary to secondary add 500Vdc test voltage 在初级与次级间加 **500Vdc** 进行测试 **,** 最小绝缘阻抗 **50MΩ** 

## **9. Outline Drawing/** 外观示意图: 

9 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

**==> picture [224 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
10. DC Cord Drawing/ DC 线示意图:<br>**----- End of picture text -----**<br>


10 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

**11. Marking Drawing/** 铭牌示意图: 

11 of 12 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## **12. Package Drawing/** 包装示意图: 

## MECHANICAL DIMENSION: 

PLASTIC BAG/PE袋 WHITE BOX/白盒 CARDBOARD/纸板 PAPER CASE/纸箱 

||L(mm)|W(mm)|H(mm)|
|---|---|---|---|
|PLASTIC BAG|210|130||
|WHITE BOX|145|70|40|
|CARDBOARD|365|300||
|PAPER CASE|375|310|235|



## PACKING METHOD： 

|PACKING METHOD|10PCS/LAYER *5LAYERS|
|---|---|
|QTY|50PCS|
|N.W|11.0Kg|
|G.W|12.5Kg|



12 of 12
Updated at June 10, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →