Image not available
Illustrative purposes only
15DYS6150-3000500P
AC/DC Power Supply, ITE, 1 Output, 150 W, 30 VDC, 5 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: IDEAL POWER
- Product type: AC / DC External Plug In Adaptor Power Supplies
- Plug Type: Mains Plug Sold Separately
- Product Range: Ideal Power - Desktop Power Supplies
- No. of Outputs: 1 Output
- Output Connector: Barrel Plug Center Positive 2.1mm x 5.5mm
- Output Power Max: 150W
- Input Voltage VAC: 90V AC to 264V AC
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 90V
- Power Supply Approvals: ITE
- Power Supply Output Type: Fixed
- Output Current - Output 1: 5A
- Output Voltage - Output 1: 30VDC
| Delivery and price | |
|---|---|
| Units per pack | 10 |
| Price | 47.06 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## IDEAL POWER LTD ## .2 .& **SPECIFICATION FOR APPROVAL** “&j **.** CUSTOMER/客户 : 01097 ARTICLE/品名: SWITCHING MODE POWER SUPPLY SPECIFICATION /规格: UL/GS/CE/SAA Desktop/桌上式 MODEL NO/产品型号. : DYS6150-3000500P OUR PART NO./产品编号: DYS6150-3000500-17316G CUSTOMER P. N/客户料号: INPUT/输入 : 100-240V AC 50/60Hz OUTPUT/输出: 30.0V DC 5.0A INPUT/输入 : 100-240V AC 50/60Hz REV/DATE:/版本/日期： 01 2017/03/16 |Vendor Confirmation/供应商确认|Vendor Confirmation/供应商确认|Vendor Confirmation/供应商确认|Confirmation Approved/客户确认|Confirmation Approved/客户确认|Confirmation Approved/客户确认| |---|---|---|---|---|---| |Made by|Checked by|Approved by|Made by|Checked by|Approved by| |Zhouliu|Liufei|Rock Bin|||| Remark/备注： ## **IDEAL POWER LTD** Add: 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZ. TEL: +44(0) 845 2603400 FAX: +44(0) 845 2603401 E-mail: sales@idealpower.co.uk Http://www.idealpower.co.uk ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION ## E.C.LIST/变更履历表 |Rev.<br>版本|Description of Change/变更内容描述|Description of Change/变更内容描述|Changed<br>Date/日期|Operator/<br>执行者| |---|---|---|---|---| ||Before/变更前|After/变更后||| |01|Original Release(初次发行)||2017/03/16|Zhaoliu| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| |||||| 2 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION ||SPECIFICATION|| |---|---|---| ||CONTENTS/目录|| |1|Compendium/简述…………………………………………………………………………….…. ….…. ……….…..….....4|| |2|Input Characteristics/输入特性………………………….………………………….. ….…. ……….….………….…..….4|| ||2.1<br>Input Voltage & Frequency/输入电压&频率……..………………………………….…. ……….….……….…..….4|| ||2.2<br>Input AC Current/AC 输入电流…..……………………………………………..…….…. ……….….……….…..….4|| ||2.3<br>Inrush Current (Cold Start)/浪涌电流(冷启动)…….………………….…………….…. ……….….……….…......4|| ||2.4<br>Efficiency (Normal)/效率(额定输入)…………………………………..…….………. ……….….……….…..…….4|| ||2.5<br>Energy Consumption /空载功耗………………………………………………….. ….…. ……….……….…..……..4|| |3|Output Characteristics/输出特性…………………………………………………...…………….…. ……….….….….....5|| ||3.1<br>Static Output Characteristics <Vo & R+N>/静态输出特性………..……...….…….…. ……….….…….…..…....5|| ||3.2<br>Line / Load Regulation/线性/负载调整率…...………….……………..……………….…. …….….…….….. .….5|| ||3.3<br>Turn on Delay Time/开机延迟时间…………………………………….…………. ………….….….….…….…..…5|| ||3.4<br>Hold up Time/关机维持时间…………………………………………………..……….…. ……….….…….…..…...5|| ||3.5<br>Capacitance Load/容性负载………………………………………………………..……….…. …….….…….……..5|| ||3.6<br>Output Overshoot / Undershoot/输出过冲/欠冲……………………………………….….…….…..….….…….....5|| ||3.7<br>Output Load Transient Response/输出负载瞬态响应…..…………….……………….….…….…..……….…….5|| |4|Protection Requirements/保护特性……………………………………………..…………….….…….…..………….......6|| ||4.1<br>Over Current Protection/过流保护………………………………………………………….….…….…..……..…....6|| ||4.2<br>Short Circuit Protection/短路保护………………………………...………………………….….…….…..…...........6|| ||4.3<br>Over Voltage Protection/过压保护…………………………………………………………….….…….…...………..6|| |5|Environment Requirements/环境要求.…….……….…….……………………….….. …………….….…….…..………6|| ||5.1<br>Operating Temperature and Relative Humidity/操作温/湿度要求…………...…. ………….….…….…..……....6|| ||5.2<br>Storage Temperature and Relative Humidity/存储温/湿度要求……..……...…………….….…….…..……..…..6|| ||5.3<br>Vibration/振动……………………………………………..……………….………………….….…….…..……….....6|| ||5.4<br>Drop in /跌落…………………………………………………………………………….….…….…..………………..6|| |6|Reliability Requirements/可靠性要求………………………………………………………………………………………7|| ||6.1<br>Burn-in/煲机………………………………………………………………………….….…….…...….. ………………7|| ||6.2<br>MTBF Qualification/平均间隔故障时间估算………………………………...……………………………….............7|| |7|EMI/EMS Standards/EMI/EMS 标准………………………………………………………………………………………….7|| ||7.1<br>EMI Standards/EMI 标准…………….………………………………….….…….…...…….......................................7|| ||7.2<br>EMS Standards/EMS 标准……………………………………………………………………………….….…….…….7|| |8|Safety Standards/安规标准………………………………….…..……………………………………….….………….…….8|| ||8.1Safety Accord with/安全:符合标准………………………………..……………………………………………………...8|| ||8.2Dielectric Strength(Hi-pot)/介电耐压强度(高压)………………...………………………………………………….…8|| ||8.3Leakage Current/漏电流…………………………………………...………………………...........................................8|| ||8.4Insulation Resistance/绝缘阻抗…………………………………...………………………….......................................8|| |9|Outline Drawing/外观示意图:……………………………….......……………………………............................................9|| |10|DC Cord Drawing/DC 线示意图: ……………………………..…………………………………….………………….....10|| |11|Marking Drawing/铭牌示意图:……………………………………………………………...............................................11|| |12|Package Drawing/包装示意图:……………………………………………………………..............................................12|| ||3 of 12|| ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION ## **1.Compendium/** 简述 The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 150 W continuous output power. 资料详细描述了一款 **150 W(** 连续输出功率 **)** 开关电源的电气性，结构性及环境等要求 . The power supply shall meet the RoHS requirements. 此款电源符合 **RoHS** 要求 **.** ## **1.1 Description/** 描述 插墙式适配器 SMPS Adapter(Interchangeable)/ 可换头适配器 桌面型适配器 Open Frame/ 开放式结构 带铁壳型 Others/ 其他 ## **2. Input Characteristics/** 输入特性 ## **2.1 Input Voltage & Frequency/** 输入电压与频率 The range of input voltage is from 90Vac to 264Vac with a single phase. 输入电压范围：从 **90Vac** 到 **264Vac,** 单相输入 **.** ||Minimum/最小|Nominal/额定值|Maximum/最大| |---|---|---|---| |Input Voltage/输入电压|90Vac|100Vac~240Vac|264Vac| |Input Frequency/输入频率|47Hz|60Hz/50Hz|63Hz| ## **2.2 Input AC Current/AC** 输入电流 2.5Amax @ 100-240Vac input & Full load/ 在 **100 – 240 Vac** 输入和满载条件下最大 **2.5A** 有效值 ## **2.3 Inrush Current (cold start)/** 浪涌电流 **(** 冷启动 **)** The inrush current will not exceed 80A at 100-240Vac input and Max load for a cold start at 25 `℃` 在100-240V 交流电输入和最大负载冷启动环境25℃时浪通电流不能超过 80A ## **2.4 Average Efficiency/** 平均效率 While input 115Vac and 230Vac, the average efficiency is more than 88.0%. The test point is at 25%, 50%, 75% and 100% of max load respectively. `在输入` **115Vac** `和` **230Vac** `条件下，平均效率不小于` **88.0%** `。 测试点分别是最大载的` **25%,50%,75%** `和` **100%** `。` ## **2.5 Energy Consumption /** 空载功耗 While input 115Vac or 230Vac and the output is no load,the input power loss must be less than 0.21W 4 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION 在输入 **115Vac/230Vac** 时 **,** 空载功耗小于 **0.21W** ## **3. Output Characteristics/** 输出特性 **3.1 Static Output Characteristics <Vo & R+N>/** 静态输出特性 **<** 输出 **&** 纹波 **+** 噪音 **>** |Output|Rated Load/额定负载|Rated Load/额定负载|Rated Load/额定负载|Output Range<br>输出电压范围|R+N<br>纹波与噪声|Remark<br>备 注| |---|---|---|---|---|---|---| |Rate|Min. Load|Max. Load||||| |+30V|0.0A|5.0A||28.5V-31.5V|300mVp-p|| Ripple & Noise: Measurement is done by 20MHz bandwidth oscilloscope and the outputparalleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor. (test under the condition of rated input and rated output) 纹波与噪声 **:** 量测时示波器选用 **20MHz** 带宽限制 **,** 输出端要并联一颗 **0.1uF** 的陶瓷电容和一颗 **10uF** 的电 解电容 **.** (在额定输入及输出的条件下检测) ## **3.2 Line/ Load Regulation/** 线性 **/** 负载调整率 |Output|Load Condition/负载条件|Load Condition/负载条件|Line Regulation<br>线性调整率|Load Regulation<br>负载调整率|Remark<br>备 注| |---|---|---|---|---|---| |Rate|Min. Load|Max. Load|||| |+30V|0.0A|5.0A|3%|5%|| ## **3.3 Turn - on Delay Time/ 开机延迟时间** 3S max. @ 100 Vac to 240 Vac input & Full load 在 **100Vac** 到 **240Vac** 输入和满载条件下最大 **3S** ## **3.4 Hold-up Time/** 关机维持时间 5mS min. @ Full load &115Vac/60Hz input turn off at worst case 在 **115Vac** 输入 **,** 满载同时最差情况下关机，最小 **5mS** ## **3.5 Capacitance Load/ 容性负载** While input 100~240Vac and capacitance load is 470uF, the adapter can turn on normally and the output is in the rated range. 在输入 **100~240Vac** ， **470uF** 容性负载条件下，适配器能正常开机。 并且输出电压范围在额定范围下。 ## **3.6 Output Overshoot / Undershoot/** 输出过冲 **/** 欠冲 10% max. When the power on or off 当电源开/关机时,10%最大 5 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION ## **3.7 Output Load Transient Response/** 输出负载瞬态响应 the output shall not exceed 10% of the nominal output voltage, load flunctuation: from 20% to 80%, R/S: 0.25A/uS, frequency: 100Hz duration and 10mS at 80%. 输出电压不能超过额定电压的 **10%,** 负载变化 **:** 从 **20%** 到 **80%,** 斜率 **: 0.25A/uS,** 频率 **: 100Hz, 80%** 负载持续时间为 **10mS.** ## **4. Protection Requirements/** 保护要求 ## **4.1 Over Current Protection/** 过流保护 Over Current Point Limited/ `过流点限制：` I `＞` **6.5A** The output shall hiccup when the over currents applied to the output rail, and shall be self-recovery when the fault condition is removed ``` 当过电流时，输出将进入打嗝模式，当过流情况解除后，产品将会自动恢复正常 ``` ## **4.2 Short Circuit Protection/** 短路保护 The input power shall decrease when the output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed 当输出短路时 **,** 产品输入功率降低且不会损伤 **,** 当短路情况解除后 **,** 产品将会自动恢复正常 ## **4.3 Over Voltage Protection/** 过压保护 The power supply shall protection when the output over voltage `。` The output shall latched and shall be recovery when the fault condition is removed and power on again `。 当输出发生过压时，产品进入保护模式，故障解除后重新上电恢复正常.` ## **5. Environment Requirements/** 环境要求 ## **5.1 Operating Temperature and Relative Humidity/** 操作温 **/** 湿度要求 0°C to +40°C 10%RH to 90%RH ## **5.2 Storage Temperature and Relative Humidity/** 存储温 **/** 湿度要求 -20°C to +80°C 5%RH to 95%RH non-condensing @ Sea level shall be low 10,000 feet/ 低于 **10,000** 英尺 ## **5.3 Vibration/** 振动 10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z 扫描频率 **: 10 to 300Hz,** 加速度 **: 1.0G(** 位移 **: 3.5mm), X, Y, Z** 三垂直坐标轴向各振动 **1** 小时 ## **5.4 Drop in/** 跌落 Height: 1m; the product should be fell off on the hardwood with the thickness of20mm, and the hardwood should be put on the base of the cement or on the ground without 6 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION flexibility. Apply one times on all surface. `跌落高度:1 米, 并跌落到厚度为20mm 的硬木上,且硬木应放在水泥基座或等同的无 弹性地面上,每面各1 次.` ## **6.Reliability Requirements/** 可靠性要求 ## **6.1 Burn-in/** 煲机 The power supply shall be burn-in at least 4 Hours under normal input and 80% rated load at 40 ℃[] 5 ℃ 产品至少要在 **40** ℃[] **5** ℃的环境及 **80%** 以上额定负载条件下煲机 **4** 小时 ## **6.2 MTBF Qualification/** 平均间隔故障时间估算 The MTBF shall be at least 50,000hours at 25°C, Full load and nominal input condition 平均间隔故障时间 **:** 至少 **50,000** 小时 **,25** °C 环境及额定输入与满载条件下 ## **7. EMI/EMS Standards/EMI/EMS** 标准 ## **7.1 EMI Standards/EMI** 标准 ``` FCC Part15 class B ``` ``` EN55022 EN55013 EN55014-1 EN61204-3(CISPR 22) AS/NZS CISPR22 AS/NZS CISPR13 AS/NZS CISPR14.1 GB9254 GB13837 GB17625.1 J55022 J55013 J55014-1 KN22 KN13 KN14-1 CNS13438 ``` ## **7.2 EMS Standards/EMS** 标准 ``` EN55024 EN55020 EN55014-2 EN61204-3 ``` 7.2.1 IEC 61000-4-2, electrostatic discharge(ESD) requirement/ 静电抗扰度要求 Discharge characteristic/ 静电规格 Test level/ 测试条件 Test criteria/ 测试标准 Air discharge/ 空气放电 +/-8KV B Contact discharge/ 接触放电 +/-4 KV B 7.2.2 IEC 61000-4-4, electric fast transients(EFT) immunity requirement/ 电快速瞬变脉冲群 Coupling/ 测试端口 Test level/ 测试条件 Test criteria/ 测试标准 7 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION |Surge voltage/雷击电压|Surge voltage/雷击电压|Test criteria/测试标准| |---|---|---| |Differential mode/差模 +/-1KV||A| |Common mode/共模 +/-2KV||| |**7.2.4Assessment criteria /**评估标准||| |Acceptable criteria<br>可接受标准|Performance<br>性能|| |A|Performance is not allowed to be changed, any changes should be<br>within the specified limits<br>性能不允许变化；如果性能会发生变化，则变化的范围在产品规格书规<br>定的范围内.|| |B|During the testing process, the performance degradation is allowed<br>within the specifications of the product specification. After the<br>elimination, the equipment can return to normal and no reset or any<br>manual intervention is allowed. .<br>设备在测试过程中,性能降低允许在产品规格书要求范围内,干拢消除<br>后,设备能恢复正常,不允许出现复位和任何方式的人工干预.|| ## **8. Safety Standards/** 安规标准 ## **8.1 Safety Accord with/ 安全 : 符合标准** ||`UL60950-1,CSA C22.2 NO.60950-1`<br> `UL60065,CSA C22.2 NO.60065`<br> `UL1310`<br> `IEC60950-1`<br> `IEC60065`<br> `IEC61558-1,IEC61558-2-16`<br> `EN60950-1`<br> `EN60065`<br> `EN61558-1,EN61558-2-16`<br> `AS/NZS 60950.1`<br> `AS/NZS 60065`<br> `AS/NZS 61558.1,AS/NZS 61558.2.16`<br> `GB4943.1`<br> `GB8898`<br> `J60950-1`<br> `J60065`<br> `J61558-1,J61558-2-16`<br> `K60950-1`<br> `K60065`<br> `CNS14336-1`<br> `CNS14408`| |---|---| ||| Note: AC pins corresponding to relative national standards. ``` 注：相应的AC插脚对应相应国家的标准. ``` 8 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION ## **8.2 Dielectric Strength(Hi-pot)/** 介电耐压强度 **(** 高压 **)** Primary to Secondary: 4242VDC / 5mAMax / 60second(3 seconds for mass production) 初级对次级 **: 4242VDC / 5mAMax / 60** 秒 **(** 生产时高压测试时间 **: 3** 秒 **)** ## **8.3 Leakage Current/** 漏电流 - 0.25mAmax. at 264Vac / 50Hz / 在 **264Vac / 50Hz** 输入时，最大漏电流 **0.25mA** ## **8.4 Insulation Resistance/** 绝缘阻抗 50MΩ min. at primary to secondary add 500Vdc test voltage 在初级与次级间加 **500Vdc** 进行测试 **,** 最小绝缘阻抗 **50MΩ** ## **9. Outline Drawing/** 外观示意图: 9 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION ## **10. DC Cord Drawing/** DC 线示意图: 10 of 12 ## **IDEAL POWER LTD** SWITCHING MODE POWER SUPPLY SPECIFICATION **==> picture [217 x 16] intentionally omitted <==** **----- Start of picture text -----**<br> 11. Marking Drawing/ 铭牌示意图:<br>**----- End of picture text -----**<br> 11 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION ## **12. Package Drawing/** 包装示意图: ## MECHANICAL DIMENSION: PLASTIC BAG/PE袋 WHITE BOX/白盒 CARDBOARD/纸板 PAPER CASE/纸箱 ||L(mm)|W(mm)|H(mm)| |---|---|---|---| |PLASTIC BAG|330|150|| |WHITE BOX|230|130|55| |CARDBOARD|470|285|| |PAPER CASE|480|295|300| ## PACKING METHOD： |PACKING METHOD|5PCS/LAYER *4LAYERS| |---|---| |QTY|20PCS| |N.G|7.8Kg| |G.W|9.5Kg| 12 of 12 ## **IDEAL POWER LTD** ## SWITCHING MODE POWER SUPPLY ## SPECIFICATION ------ END ------ 13 of 12
Updated at February 9, 2023
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →