158X104

## **158X Series T e X2 Su ressor Ca acitors yp pp p** 

## **Metallized Polyester / Radial Leads** 

## **GENERAL** 

Insulation Resistance (IR) (@ 500 VDC and 20 °C) Terminal to Terminal: 

## **SPECIFICATIONS** 

- Radial Leads 

Operating Temperature: . -40 °C to +100 °C Voltage Range: 275/250  VAC, 60 Hz Capacitance Range: 0.01 µF to 2.2 µF Capacitance Tolerance: 

in Two Lengths 

|Insulation Resistance (IR)<br>(@ 500 VDC and 20 °C)<br>Terminal to Terminal:|Insulation Resistance (IR)<br>(@ 500 VDC and 20 °C)<br>Terminal to Terminal:|Insulation Resistance (IR)<br>(@ 500 VDC and 20 °C)<br>Terminal to Terminal:|Insulation Resistance (IR)<br>(@ 500 VDC and 20 °C)<br>Terminal to Terminal:|
|---|---|---|---|
|≤0.33µF<br>15,000 MΩ min<br> ≥0.47µF<br>5,000 MΩx µF min<br>Both Terminals to Body:<br>100,000 MΩmin<br>**Maximum Pulse Rise Time**||||
|**µF**<br>.010||**V/µs **<br>2800|**µF **<br>**V/µs **<br>0.22<br>1200|
|.022||2400|0.47<br>1000|
|.033||2400|0.68<br>1000|
|.047||2000|1.00<br>800|
|.068||2000|1.50<br>800|
|.100||1600|2.20<br>600|



- UL and CSA Approved 

- • Flame Retardant Case Meets UL94V-0 

- Potting End Fill Meets UL94V-0 

- Used in applications where damage to the capacitor will not lead to the danger of electrical shock 

      - ±20% (Standard) 

   - ±10% (Special) 

   - Dissipation Factor (DF) 

- Lead Material tg δ 0.01 Max at 1,000 ± 100kHz Tinned Copper Clad Steel 

## **International Approvals** 

## **Outline Dimensions** 

|**Safety Agency**|**Standard**|**File Number**|
|---|---|---|
|UL|UL-60384-14|E171988|
|UL|UL-60384-14|E223166|
|CSA|C22 2, No. 1-98/No.8(250VAC)|1572961|
|VDE|IEC384-14 II<br>EN 132400|109365|
|SEMKO|IEC384-14 II<br>EN 132400|9817262|
|FIMKO|IEC384-14 II<br>EN 132400|11141|
|DEMKO|IEC384-14 II<br>EN 132400|9817262|
|NEMKO|IEC384-14 II<br>EN 132400|P98101124|



Complies with the EU Directive 2002/95/ EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). 

## **Ratin s g** 

|**Ratings**||||||||Compliant|PolyBrominated Biphenyls (PBB) and<br>PolyBrominated Diphenyl Ethers (PBDE).<br>Compliant|PolyBrominated Biphenyls (PBB) and<br>PolyBrominated Diphenyl Ethers (PBDE).|PolyBrominated Biphenyls (PBB) and<br>PolyBrominated Diphenyl Ethers (PBDE).|
|---|---|---|---|---|---|---|---|---|---|---|---|
|||||**Inches**|||||**Millimeters**|||
|**Catalog**<br>**Part Number**|**Cap**<br>**(µF)**|**L**<br>**Length**|**T**<br>**Thickness**|**H**<br>**Height**|**S**<br>**Spacing**|**Ød**|**L**<br>**Length**|**T**<br>**Thickness**|**H**<br>**Height**|**S**<br>**Spacing**|**Ød**|
|158X103|0.010|0.669|0.197|0.472|0.591|0.024|17.0|5.0|12.0|15.0|0.6|
|158X123|0.012|0.669|0.197|0.472|0.591|0.024|17.0|5.0|12.0|15.0|0.6|
|158X153|0.015|0.669|0.197|0.472|0.591|0.024|17.0|5.0|12.0|15.0|0.6|
|158X183|0.018|0.669|0.197|0.472|0.591|0.024|17.0|5.0|12.0|15.0|0.6|
|158X223|0.022|0.669|0.197|0.472|0.591|0.024|17.0|5.0|12.0|15.0|0.6|
|158X273|0.027|0.669|0.197|0.472|0.591|0.024|17.0|5.0|12.0|15.0|0.6|
|158X333|0.033|0.669|0.197|0.472|0.591|0.024|17.0|5.0|12.0|15.0|0.6|
|158X393|0.039|0.669|0.217|0.492|0.591|0.031|17.0|5.5|12.5|15.0|0.8|
|158X473|0.047|0.669|0.217|0.492|0.591|0.031|17.0|5.5|12.5|15.0|0.8|
|158X563|0.056|0.669|0.256|0.531|0.591|0.031|17.0|6.5|13.5|15.0|0.8|
|158X683|0.068|0.669|0.256|0.531|0.591|0.031|17.0|6.5|13.5|15.0|0.8|
|158X823|0.082|0.669|0.256|0.591|0.591|0.031|17.0|6.5|15.0|15.0|0.8|
|158X104|0.100|0.669|0.315|0.591|0.591|0.031|17.0|8.0|15.0|15.0|0.8|
|158X124|0.120|0.984|0.256|0.630|0.886|0.031|25.0|6.5|16.0|22.5|0.8|
|158X154|0.150|0.984|0.256|0.630|0.886|0.031|25.0|6.5|16.0|22.5|0.8|
|158X184|0.180|0.984|0.315|0.689|0.886|0.031|25.0|8.0|17.5|22.5|0.8|
|158X224|0.220|0.984|0.315|0.689|0.886|0.031|25.0|8.0|17.5|22.5|0.8|
|158X274|0.270|1.181|0.354|0.669|1.083|0.031|30.0|9.0|17.0|27.5|0.8|
|158X334|0.330|0.984|0.394|0.768|0.886|0.031|25.0|10.0|19.5|22.5|0.8|
|158X394|0.390|1.181|0.433|0.866|1.083|0.031|30.0|11.0|22.0|27.5|0.8|
|158X474|0.470|1.181|0.433|0.866|1.083|0.031|30.0|11.0|22.0|27.5|0.8|
|158X564|0.560|1.181|0.531|0.965|1.083|0.031|30.0|13.5|24.5|27.5|0.8|
|158X684|0.680|1.181|0.531|0.965|1.083|0.031|30.0|13.5|24.5|27.5|0.8|
|158X824|0.820|1.201|0.630|1.102|1.083|0.039|30.5|16.0|28.0|27.5|1.0|
|158X105|1.000|1.201|0.630|1.102|1.083|0.039|30.5|16.0|28.0|27.5|1.0|
|158X125|1.200|1.614|0.610|1.102|1.476|0.039|41.0|15.5|28.0|37.5|1.0|
|158X155|1.500|1.614|0.610|1.102|1.476|0.039|41.0|15.5|28.0|37.5|1.0|
|158X185|1.800|1.614|0.689|1.280|1.476|0.039|41.0|17.5|32.5|37.5|1.0|
|158X225|2.200|1.614|0.689|1.280|1.476|0.039|41.0|17.5|32.5|37.5|1.0|



NOTE: If ±10% tolerance is required, add 'K' to end of Catalog Number NOTE: Parts are normally supplied with leads 30mm minimum To order short leads, 3.5mm minimum length, add 'S' to end of Catalog Part Number. 

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com 

**158X Series T e X2 Su ressor Ca acitors yp pp p** 

**Notice and Disclaimer:** All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements  (“Cornell Dubilier”) has of  operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of  any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained.  Although Cornell Dubilier strives to apply  the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com