Image not available
Illustrative purposes only
1462043-3
Signal Relay, 5 VDC, DPST-NO, 2 A, IM, Surface Mount, Non Latching
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TE CONNECTIVITY
- Product type: Signal Relays
- Coil Type: Non Latching
- Coil Voltage: 5VDC
- Product Range: IM
- Relay Mounting: Surface Mount
- Coil Resistance: 178ohm
- Contact Current: 2A
- Relay Terminals: Solder
- Contact Material: Gold, Palladium, Ruthenium
- Contact Voltage VAC: 250V
- Contact Voltage VDC: 220V
- Contact Configuration: DPST-NO
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 3.06 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
Signal Relays **AXICOM** ## **IM - E Relay** > n **Minimum board-space 60mm[2]** > n **Slim line 10x6mm (0.39x0.24”) and** > n **Low profile 5.65mm (0.222”)** > n **Switching power 60W/62.5VA** > n **Switching voltage 220VDC/250VAC** > n **Switching current 2A** - n **Bifurcated contacts** > n **High mechanical shock resistance** ## Typical applications Telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment. Buyer entirely assumes the risk and all liability relating to (a) assessing the suitability for Buyer’s intended use of the Products and of any system design or drawing and (b) determining the compliance of Buyer’s use of the Products with applicable laws, regulations, codes and standards. For more info on the exclusive and applicable warranty, please refer to TE standard warranty terms. ## ~~**Approvals**~~ |UL 61810-1 (former UL 508) File No. E214025|UL 61810-1 (former UL 508) File No. E214025| |---|---| |Technical data of approved types on request|| |~~**Contact Data**~~|| |Contact arrangement|2 Form A, 2 NO| |Max. switching voltage|220VDC, 250VAC| |Rated current|2A| |Limiting continuous current|2A| |Switching power|60W, 62.5VA| |Contact material|PdRu| ||Au covered| |Contact style|twin contacts| |Minimum switching voltage|100µV| |Initial contact resistance|<50mΩ at 10mA/30mV| |Thermoelectric potential|<10µV| |Operate time|typ. 1ms, max. 3ms| |Release time|| |without diode in parallel|typ. 1ms, max. 3ms| |with diode in parallel|typ. 3ms, max. 5ms| |Set/reset time max.|typ. 1ms, max. 3ms| |Bounce time max.<br>Electrical endurance<br>~~ee~~|typ. 1ms, max. 5ms| |at contact application 0<br>(≤30mV/≤10mA)<br>cable load open end<br>resistive, 125VDC / 0.24A - 30W<br>resistive, 220 VDC / 0.27A - 60W<br>resistive, 250VAC / 0.25A - 62.5VA|min. 2.5x106operations<br>min. 2.0x106operations<br>min. 5x105operations<br>min. 1x105operations<br>min. 1x105operations| |resistive, 30VDC / 1A - 30W<br>resistive, 30VDC / 2A-60W|min. 5x105operations<br>min. 1x105operations| ## U |~~**Contact Data**(continued)~~<br>UL contact rating|30VDC, 2A, 60W, NO only<br>110VDC, 0.3A, 33W<br>220VDC, 0.27A, 60W<br>125VAC, 0.5A, 62.5W| |---|---| ||250VAC, 0.25A, 62.5W| |Mechanical endurance|min. 107operations| |~~**Coil Data**~~|~~**Coil Data**~~||||| |---|---|---|---|---|---| |Coil voltage range|Coil voltage range|||1.5 to 24VDC|| |Max. coil temperature||||125°C|| |Thermal resistance||||<150K/W|| |**Coil versions, standard version, monostable, 1 coil**||**Coil versions, standard version, monostable, 1 coil**|**Coil versions, standard version, monostable, 1 coil**||| |Coil|Rated|Operate|Release|Release<br>Coil|Rated coil| |code|voltage|voltage|voltage|voltage<br>resistance|power| ||VDC|VDC|VDC|Ω±10%|mW| |01|3.0|2.25|0.30|64|140| |02|4.5|3.38|0.45|145|140| |03|5.0|3.75|0.50|178|140| |06|12.0|9.00|1.20|1029|140| All figures are given for coil without pre-energization, at ambient temperature +23°C ## **Coil operating range, standard version** ## **Max. DC load breaking capacity** **==> picture [101 x 75] intentionally omitted <==** **----- Start of picture text -----**<br> esa COa resistive load<br>a<br>sol _1 TTTTIN<br>40 ETN<br>so ETE SAT<br>20 | recommended<br>application range<br>10<br>0,1 0,2 0.5 1 2 5<br>DC current [A]<br> DC Voltage [Vdc]<br>**----- End of picture text -----**<br> 1 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 07-2021, Rev. 0721 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Signal Relays **AXICOM** ## **IM - E Relay** (Continued) |~~**Insulation**~~|||~~**Other Data**~~|| |---|---|---|---|---| |Initial dielectric strength|||Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|| |between open contacts|750Vrms||refer to the Product Compliance Support Center at|| |between contact and coil|1800Vrms||www.te.com/customersupport/rohssupportcenter|| |between adjacent contacts|1000Vrms||Ambient temperature|-40°C to +85°C| |Initial surge withstand voltage|||~~Thermal resistance~~|~~<1~~50K/~~W~~| |between open contacts|1500V||Category of environmental protection|Category of environmental protection| |between contact and coil|2500V||IEC 61810|RT V - hermetically sealed| |between adjacent contacts|1500V||Degree of protection|| |Initial insulation resistance|||IEC 60529|IP 67, immersion cleanable| |between insulated elements|>109Ω||Vibration resistance (functional)|20g, 10 to 500Hz| |Capacitance|||Shock resistance (functional), half sinus 11ms,<br>50g|| |between open contacts|max. 1pF||Shock resistance (destructive), half sinus 0.5ms<br>500g|| |between contact and coil|max. 2pF||Weight|max. 0.75g| |between adjacent contacts|max. 2pF||Resistance to soldering heat THT|Peek value| ||||IEC 60068-2-20|265°C/10s| ||||Resistance to soldering heat SMT|| |~~**RF Data**~~|||IEC 60068-2-58|265°C. / 10s| |Isolation at 100MHz/900MHz|37.0dB / 18.8dB||Moisture sensitive level, JEDEC J-STD-020E<br>MSL3|| |Insertion loss at 100MHz/900MHz|0.03dB / 0.33dB||related only to SMT relays packed in original dry-packs. Calculated shelf life|| |Voltage standing wave ratio (VSWR)|||in sealed bag: 36 months at <40º C and <90% relative humidity (RH). Floor|| |at 100MHz/900MHz|1.06 / 1.49||life (out of the bag) at assembly site is 168 Hours at ≤ 30|life (out of the bag) at assembly site is 168 Hours at ≤ 30º/60% RH.| ||||Washing|see application notes| ||||Ultrasonic cleaning|not recommended| ||||Storage conditions|3 years| ||||Packaging/unit|| ||||THT version|tube/50pcs, box/1000 pcs| ||||SMT version|reel/1000 pcs., box/1000 or 5000 pcs.| ## **Dimensions** ## ~~**Terminal assignment**~~ **==> picture [46 x 7] intentionally omitted <==** **----- Start of picture text -----**<br> SMT version<br>**----- End of picture text -----**<br> **THT version** **==> picture [234 x 88] intentionally omitted <==** **----- Start of picture text -----**<br> Standard version Gull wings<br>10.0±0.08 6.0±0.08 10.0±0.08 6.0±0.08<br>=| 0.4<br>: 5.4 2.2 a! 5.08±0.1<br>0.4 7.5±0.3<br>5.4 2.2 5.08±0.1<br>Coplanarity ≤0.1mm<br>5.65-0.2 0.75 5.65-0.2<br>3.2<br>**----- End of picture text -----**<br> TOP view on relay **==> picture [73 x 8] intentionally omitted <==** **----- Start of picture text -----**<br> IM-E, 2 form A (2 NO)<br>**----- End of picture text -----**<br> ## **PCB layout** ~~TOP view on component side of PCB~~ THT mounting holes SMT - solder pads BA 22 [] ( © | to a 3 | UJ UU 1 1.240.15 I 0.7+0.1 Customer needs to apply enough solder paste volume / thickness / solder material content to ensure a stable solder joint 2 Datasheets and product specification ~~according to IEC 61810-1 and to be used~~ only together with the ‘Definitions’ section. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 07-2021, Rev. 0721 ~~www.te.com~~ © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Signal Relays **AXICOM** ## **IM - E** ~~**Relay**~~ (Continue ~~d~~ ) ## **Processing** ## **Pac** ~~**k**~~ **ing** Recommended soldering conditions ~~Tu~~ be for THT ~~version~~ 50 relays per tube, 1000 relays per box **==> picture [89 x 22] intentionally omitted <==** **----- Start of picture text -----**<br> Infrared Soldering: temperature/<br>time profile (lead and housing<br>peak temperature)<br>**----- End of picture text -----**<br> **==> picture [152 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> Recommended vapor phase soldering profile<br>**----- End of picture text -----**<br> **==> picture [241 x 166] intentionally omitted <==** **----- Start of picture text -----**<br> 20-40sec Full line: typical<br>Dottedline: processlimits<br>250 240°C , i<br>eT,<br>500 Meee=<br>180°C “<br>150 130°C forced “sy.<br>cooling ‘<br>100°C<br>50<br>O TT<br>0 50 100 150 200<br>Time (s)<br>Vapor Phase Soldering:<br>temperature/time profile (lead<br>and housing peak temperature)<br>Temperature °C<br>**----- End of picture text -----**<br> **==> picture [165 x 17] intentionally omitted <==** **----- Start of picture text -----**<br> Tape and reel for SMT ver s ion<br>1000 relays per reel, 1000 or 5000 relays per box<br>**----- End of picture text -----**<br> **==> picture [56 x 6] intentionally omitted <==** **----- Start of picture text -----**<br> Reel dimensions<br>**----- End of picture text -----**<br> 3 ~~Datasheets and product specifca~~ tion according to IE ~~C~~ 61810-1 and to be used ~~only together with the~~ ‘ ~~Defnitions~~ ’ section. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 07-2021, ~~Rev. 0721~~ www.te.com © 2015 T ~~yco Electronics Corporation,~~ a TE Connectivity Ltd. company Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Signal Relays **AXICOM** ## **IM - E Relay** (Continued) |**Product code structure**||Typical product code|Typical product code<br>**IM**|**E**|**03**||**G**|**R**| |---|---|---|---|---|---|---|---|---| |**Type**||||||||| |**IM**Signal Relays IM Series IMD/IME||||||||| |**Contact arrangement**||||||||| |**E**<br>2 form A, 2 NO||||||||| |**Coil**||||||||| |Coil code: please refer to coil versions table||||||||| |**Performance type**||||||||| |**Blank**Standard version||||||||| |**Terminals**||||||||| |**T**<br>THT - standard|**G**|**G**<br>SMT - gull wing||||||| |**Packing**||||||||| |**S**<br>Tube|**R**|**R**<br>Reel||||||| |**Arrangement**|**Perf. type**|**Coil**|**Coil type**|**Terminals**| |---|---|---|---|---| |**Arrangement**<br>2 form A,<br>2 NO<br>contacts|**Perf. type**<br>Standard|3VDC|**Coil type**<br>Monostable|SMT gull wing| |||||SMT gull wing<br>THT standard| |||4.5VDC||SMT gull wing| |||||THT standard| |||5VDC||SMT gull wing| |||||THT standard| |||12VDC||SMT gull wing| |||||THT standard| 4 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 07-2021, Rev. 0721 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Updated at February 9, 2023
TE Connectivity is a globally recognized engineering and manufacturing leader, specializing in highly reliable connectivity and sensing solutions. Renowned for innovation and durability, their components are engineered to perform in the most demanding environments, supporting critical advancements in industrial equipment, data communications, and automotive systems. Our extensive selection of TE Connectivity products is anchored by their industry-leading connector portfolio. We carry a comprehensive array of terminal blocks and accessories, including wire-to-board, pluggable, standard, and barrier configurations, alongside robust backplane connectors designed to ensure secure and efficient power and data transmission in complex circuit designs. Beyond physical connections, TE Connectivity is a premier manufacturer of precision sensors, antennas, and electromechanical switching components. Our inventory features a wide variety of RF antennas and highly accurate pressure, temperature, and force transducers. Additionally, we provide an expansive range of TE's dependable relays, encompassing automotive, power, and signal variants, alongside essential passive components like shielding gaskets and RF inductors to fully support your engineering requirements.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →