1462042-9

**AXICOM** 

## Signal Relays 

## **IM - C Relay** 

## n **Minimum board-space 60 mm[2]** 

> n **Slim line 10x6mm (0.39x0.24”) and low profile 5.65mm (0.222”)** 

> n **Switching power 60W/62.5VA** 

> n **Switching voltage 220VDC/250VAC** 

- n **Switching current 4A** 

## n **Bifurcated contacts** 

> n **High mechanical shock resistance** 

**==> picture [10 x 4] intentionally omitted <==**

**----- Start of picture text -----**<br>
IM_C<br>**----- End of picture text -----**<br>


## Typical applications 

Telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment 

|~~**Approvals**~~||||||||||
|---|---|---|---|---|---|---|---|---|---|
|UL 508 File No. E 111441||||||||||
|Technical data of approved types on request|Technical data of approved types on request|Technical data of approved types on request||||||||
|~~**Contact Data**~~||||||||~~**standard**~~<br>~~**C**~~||
||||||||||standard<br>high dielectric|
||||||||||version<br>version|
|Contact arrangement|||||||||1 Form C (CO)|
|Max. switching voltage|||||||||220VDC, 250VAC|
|Rated current|||||||||4A<br>4A|
|Limiting continuous current|||||||||3A<br>3A|
|Switching power|||||||||60W, 62.5VA|
|Contact material|||||||||PdRu|
||||||||||Au covered|
|Contact style|||||||||twin contacts|
|Min. recommended contact load||||Min. recommended contact load|||||100µV/1µA|
|Initial contact resistance|||||||||<50mΩ at 10mA/ 30mV|
|Thermoelectric potential|||||||||<10µV|
|Operate time|||||||||typ. 1ms, max. 3ms|
|Release time||||||||||
|without diode in parallel|||||||||typ. 1ms, max. 3ms|
|with diode in parallel|||||||||typ. 3ms, max. 5ms|
|Bounce time max.|||||||||typ. 1ms, max. 5ms|
|Electrical endurance||||||||||
|at contact application 0||||||||||
|(≤ 30mV / ≤ 10mA)|||||||||min. 2.5x106operations|
|cable load open end|||||||||min. 2.0x106operations|
|resistive, 125VDC / 0.24A - 30W|resistive, 125VDC / 0.24A - 30W|resistive, 125VDC / 0.24A - 30W|||||||min. 5x105operations|
|resistive, 220 VDC / 0.27A - 60W|||||||||min. 1x105operations|
|resistive, 250VAC / 0.25A - 62.5VA|resistive, 250VAC / 0.25A - 62.5VA||||||||min. 1x105operations|
|resistive, 30VDC / 1A - 30W<br>min. 5x105operations<br>resistive, 30VDC / 2A-60W<br>min. 1x105operations<br>DC Voltage [Vdc]<br>resistive load<br>**Max. DC load breaking capacity**<br>~~co~~<br>“=~_<br>20<br>LNT<br>|<br>100<br>=<br>S$ Sees<br>8 Serre SC<br>poe<br>TESINT<br>20 |recommended<br>Bhi<br>ol 11h<br>L<br>_<br>1<br>.<br>6<br>1<br>5<br>1||||||||||
|DC current [A]||||DC current [A]||||DC current [A]||



## U 

~~**Contact Data** (continued)~~ UL contact rating 30VDC, 2A, 60W, NO only 110VDC, 0.3A, 33W 220VDC, 0.27A, 60W 125VAC, 0.5A, 62.5W 250VAC, 0.25A, 62.5W Mechanical endurance 10[8] operations 

|~~**Coil Data**~~|~~**Coil Data**~~|||||
|---|---|---|---|---|---|
|Magnetic system|||monostable, bistable|||
|Coil voltage range|Coil voltage range|||1.5 to 24VDC||
|Max. coil temperature||||125°C.||
|Thermal resistance||||<150K/W||
|**Coil versions, standard version, monostable, 1 coil**||||||
|Coil|Rated|Operate|Release|Release<br>Coil|Rated coil|
|code|voltage set voltage min voltage|||voltage set voltage min voltage<br>resistance|power|
||VDC|VDC|VDC|Ω±10%|mW|
|01|3|2.25|0.30|64|140|
|02|4.5|3.38|0.45|145|140|
|03|5|3.75|0.50|178|140|
|06|12|9.00|1.20|1029|140|
|07|24|18.00|2.40|2880|140|



All figures are given for coil without pre-energization, at ambient temperature +23°C 

## **Coil operating range, standard version** 

1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

~~**AXICOM**~~ 

## ~~Signal Relays~~ 

## **IM - C Relay** (Continued) 

## ~~**Coil Data** (continued)~~ 

|~~**Coil Data**(continued)~~|~~**Coil Data**(continued)~~|||||
|---|---|---|---|---|---|
|**Coil versions, bistable 1 coil**||**Coil versions, bistable 1 coil**||||
|Coil|Rated|Set|Reset|Coil|Rated coil|
|code|voltage|voltage|Voltage|resistance|power|
||VDC|VDC|VDC|Ω±10%|mW|
|41|3|2.25|-2.25|90|100|



## **Coil operating range, bistable 1 coil** 

**==> picture [198 x 130] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.4<br>3.2<br>3<br>2.8 Uduty atmax. - 5%coil Umax.-5%coil<br>2.6 Umax. - 100% coil duty at 7 2x2A (100mW) duty at 0A(100mW)<br>2.4 0A (100mW)<br>2.2 im Umax | .-5%coil<br>1.81.62 ae Umax. - 100% coil duty at0A (200mW)  = ~~4™ ~ U duty at 0A (200mW) max. -5% coil  |<br>1.4 duty at 2x1A (100mW)<br>1.2<br>1 Unom. nominal coil voltage<br>0.8<br>0.6 Uset min.<br>0.4 100 mW Latching<br>0.2 200 mW Latching<br>0<br>-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140<br>Ambient Temperature [°C]<br>]nom<br>Coil Voltage [U/U<br>**----- End of picture text -----**<br>


Vibration resistance (functional) 20g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 500g Weight max. 0.75g 

## ~~**Other Data** (continued)~~ 

Resistance to soldering heat  THT Peak Value IEC 60068-2-20 265°C/10s Resistance to soldering heat SMT IEC 60068-2-58 265°C/10s Moisture sensitive level, JEDEC J-Std-020D MSL3 related only to SMT relays - ~~a~~ packed in orginal dry packs ~~Oo Ultrasonic cleaning no~~ t recommended Packaging/unit THT version tube/50pcs., box/1000 pcs. SMT version reel/1000 pcs., box/1000 or 5000 pcs. 

## **Terminal assignment** 

TOP view on relay 

Monostable version 

Bistable version, 1 coil reset condition 

All figures are given for coil without pre-energization, at ambient temperature +23°C 

|~~**Insulation**~~<br>~~**standard***~~<br>~~**C***~~<br>standard<br>high dielectric<br>version<br>version<br>~~a~~|
|---|
|Initial dielectric strength|
|between open contacts<br>1000Vrms<br>1600Vrms|
|between contact and coil<br>1800Vrms<br>2200Vrms<br>between adjacent contacts<br>Initial surge withstand voltage|
|between open contacts<br>1500V<br>2200V|
|between contact and coil<br>2500V<br>3000V|
|Initial insulation resistance|
|between insulated elements<br>>109Ω<br>>109Ω|
|Capacitance|
|between open contacts<br>max. 1pF|
|between contact and coil<br>max. 2pF|
|between adjacent contacts<br>max. 2pF|
|*this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength|
|enhancement, SF6 is hermetically sealed in relay without leaks to air during normal applica-<br>tion as recommended per the applicable product specification. It is clarified that the usage<br>of SF6 in mini signal relay is not prohibited by related regulations. Please contact~~TE local~~<br>sales or field engineer for further information and detailed material declaration.|



## ~~**RF Data**~~ 

Cross talk at 100MHz/900MHz -37.0dB/-18.8dB Insertion loss at 100MHz/900MHz 0.03dB/0.33dB Voltage standing wave ratio (VSWR) at 100MHz/900MHz 1.06/1.49 

Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use. 

## **Dimensions** 

## **SMT version** 

## **THT version** 

**==> picture [234 x 87] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard version Gull wings<br>10.0±0.08 6.0±0.08 10.0±0.08 6.0±0.08<br>0.4 5.08±0.1<br>0.4 3.2 4.4 7.5±0.3<br>3.2 4.4 5.08±0.1 5.4<br>5.4 7.5±0.3 Coplanarity ≤0.1mm<br>5.65-0.2 0.75 5.65-0.2<br>3.2<br>**----- End of picture text -----**<br>


**PCB layout** TOP view on component side of PCB 

## ~~**Other Data**~~ 

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40°C to +85°C Thermal resistance <150K/W Category of environmental protection IEC 61810 RT V - hermetically sealed Degree of protection IEC 60529 IP 67, immersion cleanable 

**==> picture [193 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
THT mounting holes SMT - solder pads<br>**----- End of picture text -----**<br>


Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

2 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifcations the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Signal Relays 

**AXICOM** 

## **IM - C** ~~**Relay**~~ (Continue ~~d~~ ) 

**Processing** 

## **Pac** ~~**k**~~ **ing** 

Recommended soldering conditions 

## ~~Tu~~ be for THT ~~version~~ 

50 relays per tube, 1000 relays per box 

**==> picture [88 x 25] intentionally omitted <==**

**----- Start of picture text -----**<br>
Infrared Soldering: temperature/ Time [s] 400<br>time profile (lead and housing<br>peak temperature)<br>**----- End of picture text -----**<br>


Resistance to soldering heat - Reflow profile 

Tape and reel for SMT ver ~~s~~ ion 1000 relays per reel, 1000 or 5000 relays per box 

Time (s) Vapor Phase Soldering: temperature/time profile (lead and housing peak temperature) 

Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020D 

**==> picture [56 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Reel dimensions<br>**----- End of picture text -----**<br>


**==> picture [241 x 140] intentionally omitted <==**

**----- Start of picture text -----**<br>
20-40sec Full line:  typical<br>. esseeeeety Dottedline: proce sslimits<br>250 240°C :<br>180°C<br>200 otters.<br>150<br>130°C forced<br>“se<br>cooling<br>100°C<br>‘00<br>50<br>TT<br>te) 50 100 150 200<br>Time (s)<br>Temperature °C<br>**----- End of picture text -----**<br>


3 

01-2016, Rev. 0116 Datasheets and product specification www.te.com according to IEC 61810-1 and to be used © 2015 Tyco Electronics Corporation, only together with the ‘Definition ~~s~~ ’ section. a TE Connectiv ~~ity Ltd. company~~ 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Relays 

**AXICOM** 

## **IM - C Relay** (Continued) 

|**Product code structure**||Typical product code||**IM**|**C**|**03**||**G**|**R**|
|---|---|---|---|---|---|---|---|---|---|
|**Type**||||||||||
|**IM**<br>Signal Relays IM Series IMC||||||||||
|**Contact arrangement**||||||||||
|**C**<br>1 form C, 1 CO||||||||||
|**Coil**||||||||||
|Coil code: please refer to coil versions table||||||||||
|**Performance type**||||||||||
|**Blank**Standard version|**C**|**C**<br>High Dielectric Version||||||||
|**Terminals**||||||||||
|**T**<br>THT - standard|**G**|**G**<br>SMT - gull wing||||||||
|**Packing**||||||||||
|**S**<br>Tube|**R**|**R**<br>Reel||||||||



|**Product code**<br>**Arrangement**<br>**Perf. type**<br>**Coil**<br>**Coil type**<br>**Terminals**<br>**Part number**|**Product code**<br>**Arrangement**<br>**Perf. type**<br>**Coil**<br>**Coil type**<br>**Terminals**<br>**Part number**|**Product code**<br>**Arrangement**<br>**Perf. type**<br>**Coil**<br>**Coil type**<br>**Terminals**<br>**Part number**|**Product code**<br>**Arrangement**<br>**Perf. type**<br>**Coil**<br>**Coil type**<br>**Terminals**<br>**Part number**|**Product code**<br>**Arrangement**<br>**Perf. type**<br>**Coil**<br>**Coil type**<br>**Terminals**<br>**Part number**|**Product code**<br>**Arrangement**<br>**Perf. type**<br>**Coil**<br>**Coil type**<br>**Terminals**<br>**Part number**|**Product code**<br>**Arrangement**<br>**Perf. type**<br>**Coil**<br>**Coil type**<br>**Terminals**<br>**Part number**|
|---|---|---|---|---|---|---|
|IMC01GR<br>IMC01TS<br>IMC02GR<br>IMC02TS<br>IMC03GR<br>IMC03TS<br>IMC06GR<br>IMC06TS<br>IMC07GR<br>IMC07TS<br>IMC02CGR<br>IMC06CGR<br>IMC06CTS<br>IMC41CTS|**Arrangement**<br>1 form C,<br>1 CO<br>contact|**Perf. type**<br>Standard|3VDC|**Coil type**<br>Monostable|SMT gull wing|1462042-1<br>1462042-4<br>1462042-2<br>1462042-5<br>1462042-8<br>1462042-7<br>1462042-3<br>1462042-6<br>1-1462042-1<br>1-1462042-2<br>1-1462042-0<br>1462042-9<br>1-1462042-4<br>1-1462042-3|
||||||SMT gull wing<br>THT standard||
||||4.5VDC||SMT gull wing||
||||||SMT gull wing<br>THT standard||
||||5VDC||SMT gull wing||
||||||SMT gull wing<br>THT standard||
||||12VDC||SMT gull wing||
||||||SMT gull wing<br>THT standard||
||||24VDC||SMT gull wing||
||||||SMT gull wing<br>THT standard||
|||High dielectric|4.5VDC||SMT gull wing||
||||12VDC||||
||||9VDC||THT standard||
||||3VDC|Bistable|||



4 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions