1419131-5

Signal Relays 

**OEG** 

## **Signal PCB Relay OUAZ** 

## n **1pole, 1A, 1form A (NO), 1 form C (CO)** 

> n **2.54mm terminal pitch same as I.C. socket terminal pitch** 

> n **Gold overlay AgPd alloy contact suitable for low loads** 

Typical applications Telecommunications, office machine 

## U C t 

## ~~**Coil Data** (continued)~~ 

|~~**Approvals**~~||||~~**Coil Data**(continued)~~|||||
|---|---|---|---|---|---|---|---|---|
|UL E82292, CSA LR48471, TuV R50138762 (Z)|||||||||
|Technical data of approved types on request||||**Coil versions, DC coil**|||||
|||||Coil<br>Rated|Operate|Release|Release<br>Coil|Rated coil|
|~~**Contact Data**~~||||code<br>voltage|voltage|voltage|resistance|power|
|Contact arrangement<br>1 form A (NO), 1 form C (CO)|1 form A (NO), 1 form C (CO)|||VDC|VDC|VDC|Ω±10%|mW|
|Rated voltage|24VDC, 120VAC|||**Standard coil, 450mW**|||||
|Max. switching voltage|24VDC, 120VAC|||05<br>5|3.5|0.25|55|450|
|Rated current||1A||06<br>6|4.2|0.3|80|450|
|Switching power||120VA, 30W||09<br>9|6.3|0.45|180|450|
|Contact material||AgPd Alloy||12<br>12|8.4|0.6|320|450|
|Min. recommended contact load|1mA at 1VDC|||24<br>24|16.8|1.2|1.280|450|
|Initial contact resistance|50mΩ at 100mA, 6VDC|||**Sensitive coil, 200mW**|||||
|Frequency of oper~~a~~tion||7~~2~~000h-1||05<br>5|3.75|0.5|125|200|
|Operate/release time max.||||06<br>6|4.5|0.~~6~~|180|200|
|standard coil||5/7ms||09<br>9|6.75|0.9|400|200|
|sensitive coil||10/7ms||12<br>12|9.0|1.2|700|200|
|Electrical endurance||||24<br>24|18.0|2.4|2800|200|
|1A, 120VAC, resistive,|100x103ops.|||All figures are given for coil without pre-energization, at ambient temperature +23°C.||||All figures are given for coil without pre-energization, at ambient temperature +23°C.|
|1A, 24VDC, resistive,|100x103ops.||||||||
|Contact ratings|1A, 120VAC/24VDC|1A, 120VAC/24VDC||~~**Insulation Data**~~|||||
|Mechanical endur~~a~~nce|10x106operations|||Initial dielectric strength|||||
|||||between open contacts|||500Vrms||
|||||between contact and coil|between contact and coil||1000V~~rm~~s||
|~~**Coil Data**~~||||high insulat~~i~~on version (Z)|||1500Vrms||
|Magnetic system||||Initial surge withstand voltage|||||
|Coil voltage range||5 to 24VDC||between co~~ntact and c~~|~~ntact and c~~oil|1500V (10/160μs)|||
|||||Clearance/creepage|||||
|||||~~between contact and coil~~|~~between contact and coil~~||~~1.5/1.76mm~~||



**==> picture [518 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
Electrical endurance Operate time Coil temperature rise<br>100 12 60<br>pota S ftNRa SS e | 10 FOOIN 50 oe<br>24VDC Resistiv<br>FREER   8 PIN | | fT 40 Pt TT Re<br>A AR 120VAC Resistive ~ L241<br>10 tt ESN   6 PT IN | | [| 30 Pi tT A<br>Operate Time<br>| =SeeSS======es |   4 ESMNS — 20 a nya y<br>SE E   2 SC E  10 PIA<br>Release Time<br>1 CCEEECC |] |<br>0.2 0.4 0.6 EE 0.8 1.0 1.2 | P 0.1 0.2 y 0.3 0.4 0.5 0.6 0.7 ft 0.1 0.2 | 0.3 tt 0.4 [tt] 0.5 0.6 0.7<br>Contact Current (A) Coil Power (W) Coil Power (W)<br>4)<br>C) °<br>Operation (x 10 Time (msec) Temp. Rise (<br>**----- End of picture text -----**<br>


## **Electrical endurance** 

1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Relays 

**OEG** 

## **Signal PCB Relay OUAZ** (Continued) 

## ~~**Other Data**~~ 

**==> picture [44 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions<br>**----- End of picture text -----**<br>


Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at ~~www.te.com/customersupport/rohssupportcenter~~ Ambient temperature standard coil -30 to 60°C .441 ± .02 11.2 ± .5 sensitive coil -30 to 70°C Category of environmental protection ~~IEC 61810 RTII - fux proof,~~ RTIII - wash tight Vibration resistance (functional) 10-50Hz, 1.5mm double amplitude .023 .018 .016 Shock resistance (functional) (.6) .023 .008 (.45) (.40) IEC 60068-2-27  (half sine) 98m/s[2] , 11ms (.6) (.2) .409 ± .02 Terminal type PCB-THT 10.4 ± .5 Weight 3.5g Resistance to soldering heat  THT .299 ± .008 IEC 60068-2-20 260°C/5s 7.6 ± .2 Packaging/unit tube/25 pcs., box/2000 pcs. .063 (1.6) .098 ± .008 2.5 ± .2 .40 ± .008 10.1 ± .2 **Terminal assignment** ~~**PCB layout**~~ Bottom view on solder pins Bottom view on solder pins ~~iat~~ .60615.4 ±± .02 .5 5 – .04 DIA. (1.0) .299 (7.6) .098 (2.5) .397 m ~~FP~~ (10.1) **Product code structure** Typical product code **OUAZ -SS 1 12 D M ,900 Type OUAZ** Signal PCB Relay OUAZ **Sealing SS** Flux proof **SH** Wash tight **Pole** ~~**1**~~ 1pole **Coil** ~~coil code:~~ please refer to coil versions table **Coil Power D** Standard 540mW **L** Sensitive 200mW **Contact Arrngement Blank** 1 form C (CO) **M** 1 form A (NO) **Insulation** ~~—~~ **Blank** Standard **Z** High Insulation (1500V) ~~**Suffx**~~ **,900** Standard **,800** High Insulation (1500V) 

|**Product code**|**Version**|**Contact**|**Cont.material Coil power**|**Cont.material Coil power**|**Coil voltage**|**Sealing**|**Part number**|
|---|---|---|---|---|---|---|---|
|OUAZ-SS-105D,900|1A|1 form C (CO)|AgPd Alloy|450mW|5VDC|Flux proof|8-1419130-3|
|OUAZ-SS-112D,900||||450mW|12VDC||5-1419145-7|
|OUAZ-SS-124D,900||||450mW|24VDC||1461015-1|
|OUAZ-SS-105L,900||||200mW|5VDC||8-1419130-6|
|OUAZ-SS-112L,900||||200mW|12VDC||1419131-5|
|OUAZ-SS-124L,900||||200mW|24VDC||1-1419131-1|
|OUAZ-SH-105D,900||||450mW|5VDC|Wash tight|3-1419145-9|
|~~OUAZ-SH-112D,900~~||||450mW|12VDC||5-1419130-6|
|OUAZ-SH-124D,900||||450mW|24VDC||1461015-4|
|OUAZ-SH-105L,900||||200mW|5VDC||4-1419145-0|
|OUAZ-SH-112L,900||||200mW|12VDC||6-1419130-5|
|OUAZ-SH-124L,900||||200mW|24VDC||4-1419145-8|



2 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

04-2011, Rev. 0411 www.te.com 

© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company