1410F110P1F1W14QE4 6.3A

**Thermal Overcurrent Circuit Breaker 1410-F1...** 

**1** 

## **Description** 

Miniaturised single pole rocker switch/thermal circuit breaker combining ON/OFF switching and extremely fast overload performance in a single component (S-type TO CBE to EN 60934/IEC 934). Under overload conditions an internal neon (filament bulb for low voltages) illuminates to give a clear signal of the tripped status of the mechanism and thereby the cause of power interruption, suffix -B. Alternatively the illumination can be conventionally wired to indicate the ON status of the device, suffix -E. Returning the rocker switch through the OFF position and back ON will reset the mechanism and restore the supply. Largely temperature-insensitive. Complies with CBE standard EN 60934 (IEC 60934). 

## **Typical applications** 

Motors, transformers, solenoids, PCBs, hand-held machines, appliances, instrumentation. 

## **Ordering information** 

**==> picture [246 x 286] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type No.<br>1410 snap-in panel mounting type<br>Mounting<br>F snap-in panel mounting<br>Size of frame<br>1 to fit mounting cut-out 28 x 12.7 mm (1.1 x .5 in)<br>Number of poles<br>1 single pole, thermally protected<br>Accessories<br>0 without accessories<br>Terminal design<br>P1 blade terminals 2.8-0.8 (QC .110/2x.110)silver-plated<br>Characteristic curve<br>F1 fast acting<br>Actuator style<br>W  rocker, rounded profile<br>Actuator colour<br>14 red translucent<br>Actuator markings<br>Q I and O<br>Trip/ON illumination (optional)<br>B illuminated when tripped<br>E illuminated when ON<br>Illumination voltage range<br>(optional)<br>2 20-28V marked 24V  35mA<br>3 90-140V marked 115V <1mA<br>4 185-275V marked 230V <1mA<br>Current ratings<br>0.63...10 A<br>1410 - F 1 1 0   -P1 F1  - W 14 Q E 3 -  2 A ordering example<br>**----- End of picture text -----**<br>


The exact part number required can be built up from the table of choices shown above. Ordering references for optional features should be omitted if not required. 

## **Standard current ratings and typical internal resistance values** 

**==> picture [238 x 98] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Current|Internal|Current|Internal|
|rating|(A)|resistance (|Ω|)|rating|(A)|resistance (|Ω|)|
|0.63|1.8|3.15|< 0.12|
|0.8|1.7|4|< 0.1|
|1|1.3|5|< 0.1|
|1.5|< 1|6.3|< 0.1|
|1.8|< 1|8|< 0.1|
|2|< 1|10|< 0.1|
|2.5|< 0.15|

**----- End of picture text -----**<br>


**==> picture [45 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
1410-F1..<br>**----- End of picture text -----**<br>


## **Technical data** 

**==> picture [245 x 363] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Voltage rating|AC 240 V; DC 28 V (DC 50 V upon request)|
|(UL: AC 250 V; DC 48 )|
|Current rating range|0.63...10 A|
|Typical life|
|circuit 1-3|30,000 operations for IN|≤6.3 A AC/DC|
|10,000 operations for IN|> 6.3 A AC|
|3,000 operations for IN|> 6.3 A DC|
|protection circuit 1-2|300 break operations at 2 x IN|
|Ambient temperature|-40...+70 °C  (-40...+158 °F)|
|Insulation co-ordination|rated impulse|pollution|
|(IEC 60664 and 60664 A)|withstand voltage|degree|
|2.5 kV|2|
|reinforced insulation in operating area|
|Dielectric strength|
|(IEC 60664 and 60664A)|test voltage|
|operating area|AC 3,000 V|
|Insulation resistance|> 100 MΩ|(DC 500 V)|
|Interrupting capacity Icn|0.63...2 A      12 x IN|
|2.5...8 A        8 x IN, AC max. 50 A|
|10 A              6 x IN|
|3.15...10 A    10 x IN, DC|
|Interrupting capacity|0.63...10 A    2,000 A    AC 250 V|
|(UL 1077)|0.63...8 A      200 A      DC 50 V|
|0.63...5 A      200 A      DC 60 V|
|Degree of protection|operating area IP30|
|(IEC 60529/DIN 40050)|terminal area IP00|
|Vibration                           8 g (57-500 Hz) ±0.61 mm (10-57 Hz),|
|to IEC 60068-2-6, test Fc,|
|10 frequency cycles/axis|
|Shock                               20 g (11 ms)|
|to IEC 60068-2-27, test Ea|
|Corrosion|48 hours at 5 % salt mist,|
|to IEC 60068-2-11, test Ka|
|Humidity|96 hours at 95 % RH|
|to IEC 60068-2-3, test Ca|
|Mass                                approx. 9 g|

**----- End of picture text -----**<br>


## **Approvals** 

**==> picture [229 x 37] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Authority|Voltage ratings|Current ratings|
|UL, CSA|AC 250 V|0.63...10 A|
|DC 50 V|0.63...8 A|
|UL|DC 60 V|0.63...5 A|

**----- End of picture text -----**<br>


05/06 

**www.e-t-a.com** 

## **Thermal Overcurrent Circuit Breaker 1410-F1...** 

**1** 

**==> picture [512 x 718] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions Internal connection diagram<br>1410-F...-....-....B. 1410-F...-....-....B. 1410-F...-....-....E.<br>16<br>.630<br>13.5 1<br>17<br>.531 .039 6<br>.670<br>.236<br>32 5 1 3 2 1 4 2<br>ON 1.26 OFF .197 line line<br>27.6 1.5 lamp current:<br>1.09 .059   24 V = 35 mA<br>115 V < 1 mA<br>230 V < 1 mA<br>Typical time/current characteristics at +23°C/+73.4°F<br>5.1 7.5 1 1 10000<br>blade terminalsDIN 46244-C .201 12 .295 .039 8.8 .039<br>(QC 2x.110) .47223.5 .346 12<br>2.1 .925 .472 1000<br>blade terminal<br>DIN 46244-A2.8-0.8 .083 32.3<br>(QC .110) 1.27<br>illuminated trip indication 100<br>21.2 10<br>.835<br>1410-F...-....-....E.<br>16 1<br>.630<br>0.1<br>13.5 1<br>.531 .039 6 17 0.01<br>.236 .670 1 2 4 6 8 10 20 40<br>32 5 … times rated current<br>ON 1.26 OFF .197<br>27.6 1.5<br>1.09 .059<br>Installation drawing<br>operating area<br>2.8 5.1 11.5 1<br>.110 .201 .453 7.5 1 8.8 .039<br>blade terminalsDIN 46244-C 12 .295 .039 .346<br>(QC 2x.110) .47223.5 .47212<br>2.1 .925<br>.083 32.3 blade terminal<br>DIN 46244-A2.8-0.8<br>1.27 (QC .110)<br>illuminated ON indication<br>21.2<br>10 10 10 10<br>panel cut-out .835 .394 .394 mounting area .394 .394<br>0.8 … 3<br>28 [+0.2]<br>.031 … .118<br>1.10 [+.008]<br>This is a metric design and millimeter dimensions take precedence  (  [mm ] inch )<br>sharp edged All dimensions without tolerances are for reference only. In the interest of improved design,<br>performance and cost effectiveness the right to make changes in these specifications<br>without notice is reserved.Product markings may not be exactly as the ordering codes.<br>Errors and omissions excepted.<br>20°<br>R 0.2<br>R .008 +0.2<br>+.008<br>3<br>.118<br>6.5 .256<br>3 21.2 .835 23.2 .913<br>.118<br>9.5 .374 9 .354<br>10.4 .409 Trip time in seconds<br>3<br>.118<br>6.5 .256<br>3 21.2 .835 23.2 .913<br>2 .118<br>.079<br>9.5 .374 9 .354<br>10 .394<br>32 1.26<br>10.4 .409<br>+0.3 +.012<br>12.7 .500<br>**----- End of picture text -----**<br>


05/06 

**www.e-t-a.com**