14-37FS-BD-16

C o p p e r B e r y l l i u m F i n g e r s t o c k 

## **Folded Series** 

Leader Tech's Folded Gasket series are industry standard general-purpose gaskets that allow a large range of deflection and compression forces. These gaskets are available with or without tape for alternate attachment methods. Also available in a snagfree version where, under compression, the leading edge of the gasket slides into an extended and folded base which prevents possible damage to the gasket. 

> **FS   Folded** | **Black = inches     Red= mm** a **P/N A B Finger Pitch Mat. Thick C Comp Length Comp Height Length Fingers  Tape** 11-28-FS-XX-16 0.11 2.79 0.28 7.11 0.170 4.32 0.188 4.78 0.003 0.076 0.24 5.842 0.37 9.4 0.065 1.65 16 406 85 0.145 ~~SO~~ 11-S-28-FS-XX-16 0.11 2.79 0.28 7.11 0.170 4.32 0.188 4.78 0.002 0.050 0.24 5.842 0.37 9.4 0.065 1.65 16 406 85 0.145 Se 14-37FS-XX-16 0.14 3.56 0.37 9.40 0.228 5.79 0.250 6.35 0.003 0.076 0.32 7.874 0.50 12.7 0.100 2.54 16 406 64 0.200 ~~OO~~ 14-37FS-XX-300 0.14 3.56 0.37 9.40 0.228 5.84 0.250 6.35 0.003 0.076 0.32 7.874 0.50 12.7 0.100 2.54 300 7620 1200 0.200 PR eeeeEEELLELLLELLLLLL 14-S-37FS-XX-16 0.14 3.56 0.37 9.40 0.228 5.79 0.250 6.35 0.002 0.050 0.31 7.874 0.50 12.7 0.100 2.54 16 406 64 0.200 E-———FErPeere 23-60FS-XX-24 0.23 5.84 0.60 15.24 0.343 8.71 0.375 9.53 0.004 0.102 0.50 12.700 0.77 19.6 0.115 2.92 24 610 64 0.250 Se ere rere ere eee be 23-S-60FS-XX-24 0.23 5.84 0.60 15.24 0.343 8.71 0.375 9.53 0.003  0.076 0.50 12.700 0.77 19.6 0.115 2.92 24 610 64 0.250 ~~OO~~ B 25-78FS-XX-24 0.25 6.35 0.78 19.81 0.335 8.51 0.375 9.53 0.005 0.127 0.53 13.462 0.94 23.9 0.115 2.92 24 610 64 0.375 Ph ~~EEE~~ = 25-78FS-XX-300 0.25 6.35 0.78 19.81 0.340 8.64 0.375 9.53 0.005 0.127 0.53 13.462 0.94 23.9 0.150 3.81 300 7620 800 0.375 A EP ——FEreEreereEEEELEELEE Ly — 25-S-78FS-XX-24 0.25 6.35 0.78 19.81 0.335 8.51 0.375 9.53 0.003 0.076 0.53 13.462 0.94 23.9 0.150 3.81 24 610 64 0.375 ~~o~~ 25-S-78FS-XX-300 0.25 6.35 0.78 19.81 0.335 8.51 0.375 9.53 0.003 ~~o~~ 0.076 0.53 13.462 0.94 23.9 0.150 3.81 300 7620 800 0.375 ZS C Lx a 41-113FS-XX-12 0.41 10.41 1.13 28.78  0.460 11.68  0.500 12.57 0.007 0.178 0.80 20.320  1.94 49.3 0.230 .584 12 305 24 0.375 ~~O~~ **MOUNTING** The Leader Tech FS gaskets are industry standard general-purpose gaskets that allow a large ~~T e~~ n **OPTIONS** range of deflection and compression forces. These gaskets are available without tape for ■ Tape alternate attachment methods. Consult factory for information. ■ Solder **Directional Force** ■ Rivet XX - Select material/finish (See order information below) 

> **FSC   Folded** | **Black = inches     Red= mm** a **P/N A B Finger Pitch Mat. Thick   Comp Height Length Fingers Tape** 8-25FSC-XX-16 0.08 2.03 0.250 6.35 0.170 4.32 0.188 4.78 0.003 0.076 0.048 1.22 16 406 85 0.250 ~~EEE EEE~~ B 11-37FSC-XX-16 0.11 2.79 0.375 9.5 0.170 4.3 0.188 4.8 0.003 0.076 0.065 1.65 16 406 85 0.250 ~~et tt~~ 11-S-37FSC-XX-16 0.11 2.79 0.375 9.5 0.170 4.3 0.188 4.8 0.002 0.050 0.065 1.65 16 406 85 0.250 [=—_ EEE SEE SEEPS AA A 14-51FSC-XX-16 0.14 3.56 0.510 13.0 0.228 5.8 0.250 6.4 0.003 0.076 0.100 2.54 16 406 64 0.250 ~~re~~ ELL LZ 14-S-51FSC-XX-16 0.14 3.56 0.510 13.0 0.228 5.8 0.250 6.4 0.002 0.050 0.100 2.54 16 406 64 0.375 i 23-76FSC-XX-24 0.23 5.84 0.760 19.3 0.343 8.7 0.375 9.5 0.004 0.102 0.115 2.92 24 610 64 0.375 ~~rea~~ **MOUNTING** The FSC was created to provide snag free gaskets with FS gasket features. The base of the gasket is **OPTIONS** extended from the mounting area and then folded up, over, down, and then comes to rest over the ■ Tape leading edge of the formed spring. Under compression, the leading edge of the gasket slides under ■ Solder and is “captured.” This “no snag” feature is also used to prevent possible gasket damage. **Directional Force** ■ Rivet XX - Select material/finish (See order information below) 

Order Toll-Free **1.866.TECH.EMI** Fax **813.855.3291** Website **www.leadertechinc.com** 

C o p p e r B e r y l l i u m F i n g e r s t o c k 

## **Folded Series (cont.)** 

**FSV   Folded Black = inches     Red= mm    Comp = Compressed P/N A B Finger Pitch Mat. Thick Comp Width  Comp Height C Hole Spacing  Hole Diameter Length     Fingers** ~~——ES am~~ 11-28FSV23-XX-16 0.11 2.8 0.28 7.1 0.170 4.3 0.188 4.8 0.003  0.076 0.37 9.4 0.065  1.65 0.24 6.1 0.80 20.3 0.06 1.52 16 406 85 ~~TPCCeLeeeeeeeeLeeLeeLL~~ 11-S-28FSV23-XX-16 0.11 2.8 0.28 7.1 0.170 4.3 0.188 4.8 0.002 0.051 0.37 9.4 0.065 1.65 0.24 6.1 0.80 20.3 0.06 1.52 16 406 85 ~~EFTfffTftttttetfttitifteefeetLLL~~ 14-37FSV30-XX-16 0.14 3.6 0.37 9.4 0.228 5.8 0.250 6.4 0.003 0.076 0.50 12.7 0.100 2.54 0.32 8.1 0.80 20.3 0.06 1.52 16 406 64 ~~LOOP~~ 14-S-37FSV30-XX-16 0.14 3.6 0.37 9.4 0.228 5.8 0.250 6.4 0.002 0.051 0.50 12.7  0.100 2.54 0.32 8.1 0.80 20.3 0.06 1.52 16 406 64 ~~EF TfffTftftTrteteftftrtitit ee eee~~ — A 23-60FSV50-XX-24 0.23 5.8 0.60 15.2 0.343 8.7 0.375 9.5 0.004 0.097 0.77 19.6 0.115 2.92 0.50 12.7 0.31 7.87 0.08 2.03 24 610 64 23-S-60FSV50-XX-24 0.23 5.8 0.60 15.2 0.343 8.7 0.375 9.5 0.002  0.051  0.77 19.6  0.115 2.92  0.50 12.7 0.31 7.87 0.08 2.03 24 610 64 C ~~EF TfffTftttttetfttitiftee feet~~ B | 25-78FSV50-XX-24 0.25 6.4 0.78 19.8 0.335  8.5 0.375 9.5 0.005 0.127 0.94 23.9 0.150 3.81 0.50 12.7 0.38 9.65 0.14 3.56 24 610 64 ~~LOOSS ELL io~~ 25-S-78FSV50-XX-24 0.25 6.4 0.78 19.8 0.335 8.5 0.375 9.5 0.003 0.076  0.94 23.9 0.150 3.81 0.50 12.7 0.38 9.65 0.14 3.56 24 610 64 ~~FP FFFTfTtrrerref+ttetieeeeee tts~~ a 41-113FSV-XX-12 0.41 10.41 1.13 28.70 0.460 11.68 0.500 12.7 0.007 0.178 0.750 19.05 0.380 9.65 0.80 20.32 0.56 14.2 0.14 3.56 12 305 24 ~~LEE EEE~~ **MOUNTING** The FSV is an FS gasket that has the base bent at a right angle to the curve of the spring form, **E** E a \- **OPTIONS** with all the other features of the FS gasket maintained. Tape optional - please consult factory. ■ Tape **Directional** ■ Rivet XX - Select material/finish (See order information below) **Force** ■ Weld ~~o~~ o ■ Solder 

**==> picture [509 x 159] intentionally omitted <==**

**----- Start of picture text -----**<br>
FSDS   Folded Black = inches     Red= mm    Comp = Compressed<br>P/N           A   B  Finger  Pitch  Comp Width Comp Height C   D  Mat. Thick  Length  Fingers<br>————EEe__QeLw!m<br>25-109FSDS-XX-24   0.25   6.4   1.09   27.7   0.335   8.5   0.375   9.5   1.27   32.26  0.150   3.81   0.16   4.06   .140   4.06   0.005   0.127   24   610   64<br>a<br>25-109FSDS-XX-300   0.25   6.4   1.09   27.7  0.335   8.5   0.375   9.5   1.27   32.26   0.150   3.81  0.16   4.06   .140  4.06  0.005  0.127   300   7620   800<br>B D<br>25-S-109FSDS-XX-24   0.25   6.4   1.09   27.7  0.335  8.5   0.375  9.5   1.27  32.26  0.150   3.81  0.16   4.06   .140  4.06    0.003   0.076   24   610   64<br>PF LEE {fftTfttfttttflit tt eteeteel etfs 1 ( Sess<br>FP 25-S-109FSDS-XX-300   OMT 0.25    EPEC 6.4   1.09   27.7  0.335    EEL 8.5   0.375   9.5   1.27   ELE 32.26  0.150   LL 3.81   0.16    ELLE 4.06   .140   4.06  0.003  LLL 0.076  300  7620  800 i A C<br>41-163FSDS-XX-24   0.41   10.4 1.63   41.4 0.460   11.7 0.500   12.7 1.90   48.26 0.230   5.84  0.19   4.83 .140   3.56  0.007  0.178 24   610  64<br>41-163FSDS-XX-300   0.41   10.4 1.63   41.4  0.460   11.7 0.500   12.7 1.90   48.26  0.230  5.84 0.19   4.83 .140  3.56  0.007   0.178 300   7620 800<br>ee .<br>MOUNTING The FSDS is an FS gasket with its base lying on the same plane as the curve in the spring form,<br>- Directional  OPTIONS ■ Tape with the mounting area  shortened.  This mounting is often modified for custom applications.<br>— Force ■ Rivet XX - Select material/finish ( 00 See order information below) ai re:= vw 2<br>■ Weld<br>■ Solder<br>**----- End of picture text -----**<br>


✔COMPLIANT[RoHS] 

**The Leading Edge in EMI Shielding Technology** 

C o p p e r B e r y l l i u m F i n g e r s t o c k 

**Ordering Information When placing an order or requesting a quotation, please give part number, your required finish I.D. from the chart below, and required length. Part Number Example: Stock Item    Finish I.D.    Length** 11-S-32RH    –    SN      –     16 ~~—~~ The above example is the “Slot Mount Series” gasket shown on page 3. The height is .11 inch  and the width is .32 inch. The “-S-” indicates a soft gasket. The “SN” indicates a bright tin finish. See list below for available finishes. This part is available in lengths of 16 inches. Consult factory for custom lengths or for availability in 25’ coils. **Available Plating Finishes: Finish Type Applicable Specifications Leader Tech Finish Code** Bright Finish - BD Bright Tin ASTM B-545 SN Satin/Matte Tin ASTM B-545 ST Tin Lead SAE AMS-P-81728 / or as specified SNpb Electro-less Nickel RoHS SAE AMS 2404 NI Zinc/Chromate Clear ASTM B-633 / SAE AMS 2402 Zinc Zinc/Chromate Yellow ASTM B-633 / SAE AMS 2402 ZincY Cadmium Chromate As specified CdC Bright Silver ASTM B-700 AG Satin/Matte Silver ASTM B-700 MAG Gold MIL-DTL-45204 / ASTM B-488 / SAE AMS 2422 AU Solderable Unplated As specified SU Standard plating finish is .0001 inch (.0025 mm) minimum. Plating processes and thicknesses may be varied to meet customer needs. Standard plating finish for gold is 0.00005 inches. See adjacent list of available finishes and consult factory for additional options. **Adhesive Mounting of Fingerstock Gaskets** ~~=~~ Leader Tech tape mounted CuBe gaskets offer pressure-sensitive, double-sided adhesive for strong bonding to a wide variety of surface conditions. Ideal for all-purpose contact strips used in metal cabinets and electronic enclosures and is unaffected by temperatures from -67 to +250°F (-55 to 121°C) 

## **Simply follow these four easy steps:** 

**1.** Remove all grease and oily residue with a solvent such as isopropyl alcohol/water mixture (rubbing alcohol) or heptane. Dry and smooth the mounting surface with emery cloth if necessary. 

**2.** Peal off the protective paper backing from the pressure sensitive adhesive tape. 

**3.** Place the gasket in correct position. Press firmly to ensure a good bond to surface. Avoid repositioning, which might impair the effectiveness of the adhesive or may bend or kink the strip. NOTE: On strips where fingers cover the solid portion of the gasket, pressure may be applied by inserting a mandrel in the strip and pressing down. 

**4.** At room temperature approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours, and 100% after 72 hours. In some cases bond strength can be increased and ultimate bond strength can be achieved more quickly by exposure of the bond to elevated temperature, e.g., 150°F (66°C) for 1 hour. 

Order Toll-Free **1.866.TECH.EMI** Fax **813.855.3291** Website **www.leadertechinc.com**