1393776-7.

Signal Relays 

**AXICOM** 

## **P1 Relay V23026** 

- n **Directly triggerable with TTL standard modules as ALS, HCT & ACT** n **Slim line 13.5x7.85mm (0.531x0.309”)** 

- n **Switching current 1 A** 

- n **Bifurcated 1 form C (CO) contact** 

- n **Immersion cleanable** 

- n **High sensitivity results in low nominal power consumption, 65 to 130mW for monostable and 30 to 150mW for bistable (latching)** 

- n **Initial surge withstand voltage** 

- **2.5kV (2/10μs) meets the Bellcore Requirement GR-1089 1.5kV (10/160μs) meets FCC Part 68** 

**==> picture [23 x 4] intentionally omitted <==**

**----- Start of picture text -----**<br>
P1_THTSMD<br>**----- End of picture text -----**<br>


## Typical applications 

Automotive equipment, CAN bus, imobilizer, office equipment, measurement and control equipment, medical equipment, safety equipment 

## Z 

|~~**Approvals**~~|||~~**Coil Data**~~|~~**Coil Data**~~|||||
|---|---|---|---|---|---|---|---|---|
|UL 508 File No. E 111441|||Magnetic system||||polarized||
|Technical data of approved types on request|Technical data of approved types on request||Coil voltage range|Coil voltage range|||3 to 24VDC||
|||||||other coil voltages on request|other coil voltages on request||
||||Operative range, IEC 61810|||see  coil operative range|||
|~~**Contact Data**~~|||Max. coil temperature||Max. coil temperature||85°C||
|Contact arrangement|1 form C (CO)||Thermal resistance||||<130K/W||
|Max. switching voltage|125VDC, 150VAC||||||||
|Rated current|1A||**Coil versions, THT, monostable**||||||
|Limiting continuous current, 85°C|1A||Coil|Rated|Operate|Release|Release<br>Coil|Rated coil|
|Breaking capacity max.|see max. DC load breaking capacity||code|voltage|volta e|voltage|voltage<br>resistance|power|
|Contact material|Palladium nickel,|||VDC|VDCmin.|VDCmin.|Ω ±10%|mW|
||gold-rhodium covered||006|3|2.25|0.3|137|66|
|Contact style|bifurcated contact||001|5|3.75|0.5|370|68|
|Min. recommended contact load|10mA at 20mV||005|9|6.75|0.9|1165|70|
|Initial contact resistance|≤50mΩ at 10mA/20mV||002|12|9.00|1.2|2250|34|
|Frequency of operation without load|Frequency of operation without load<br>200 ops./s||004|24|18.00|2.4|4500|128|
|Operate/release time max.|2ms||All figures are given for coil without pre-energization, at ambient temperature +23°C.||All figures are given for coil without pre-energization, at ambient temperature +23°C.|||All figures are given for coil without pre-energization, at ambient temperature +23°C.|
|Set/reset time max.|2ms||||||||
|Bounce time max.|3ms||**Coil versions, SMT, monostable**||||||
|Electrical endurance|||Coil|Rated|Operate|Release|Release<br>Coil|Rated coil|
|at 12V/10mA|typ. 50x106operations||code|voltage|voltage|voltage|voltage<br>resistance|power|
|at 6V/100mA|typ. 10x106operations|||VDC|VDCmin.|VDCmin.|Ω ±10%|mW|
|at 30V/1000mA|typ. 10x103operations||026|3|2.25|0.3|113|80|
|Contact ratings|||021|5|3.75|0.5|313|80|
|UL contact ratings, resistive load|UL contact ratings, resistive load<br>30VDC/1A||025|9|6.75|0.9|1015|80|
||65VDC/0.46A||022|12|9.00|1.2|1800|80|
||150VAC/0.46A||024|24|18.00|2.4|4500|128|
|Mechanical endurance|typ. 109operations||All figures are given for coil without pre-energization, at ambient temperature +23°C.||All figures are given for coil without pre-energization, at ambient temperature +23°C.|||All figures are given for coil without pre-energization, at ambient temperature +23°C.|



**Max. DC load breaking capacity** 

## **Coil operative range, monostable DC coil** 

**==> picture [191 x 165] intentionally omitted <==**

**----- Start of picture text -----**<br>
34 65 mW<br>32 130 mW<br>: [= |<br>:<br>Umax. at 0 A<br>"28 Umax. at 0 A _—— Umax. at - 1 A<br>2422 pote ~=-\\Y<br>2 TS<br>1.6 ~<br>to ~s<br>; N<br>\ Unom. nominal coil voltage ’<br>0806 a ———_ Uop. min.<br>0.204 -—- Urel. min.<br>gSES<br>40 -30 -20 -10 oO 10 20 30 40 50 60 70 80 90<br>Ambient Temperature [°C]<br>]nom<br>Coil Voltage [U/U<br>**----- End of picture text -----**<br>


1 

03-2017, Rev. 0317 Datasheets and product specification www.te.com according to IEC 61810-1 and to be used © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. a TE Connectivity Ltd. company 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

Signal Relays 

**AXICOM** 

## **P1 Relay V23026** (Continued) 

## ~~**Coil data** (continued)~~ 

|~~**Coil data**(continued)~~|~~**Coil data**(continued)~~|~~**Coil data**(continued)~~|~~**Coil data**(continued)~~|||
|---|---|---|---|---|---|
|**Coil versions, THT and SMT, bistable 2 coils**||||||
|Coil|Rated|Set|Reset|Coil|Rated coil|
|code|voltage|voltage|voltage|resistance|power|
||VDC|VDC|VDC|Ω ±10%|mW|
|106|3|2.25|2.25|130|69|
|101|5|3.75|3.75|390|64|
|105|9|6.75|6.75|1200|68|
|102|12|9.00|9.00|1500|96|
||241)|||||



All figures are given for coil without pre-energization, at ambient temperature +23°C. Coils I and II are identical. 1) A nominal voltage of 24VDC is feasible with a 12VDC coil with a series resistor (1500Ω) 

## ~~**Coil data** (continued)~~ 

|~~**Coil data**(continued)~~|~~**Coil data**(continued)~~|~~(continued)~~||||
|---|---|---|---|---|---|
|**Coil versions, THT, bistable 1 coil**||**Coil versions, THT, bistable 1 coil**|**Coil versions, THT, bistable 1 coil**|||
|Coil|Rated|Set|Reset|Coil|Rated coil|
|code|voltage|voltage|voltage|resistance|power|
||VDC|VDC|VDC|Ω ±10%|mW|
|056|3|2.25|-2.25|300|30|
|051|5|3.75|-3.75|740|34|
|057|9|6.75|-6.75|2160|38|
|052|12|9.00|-9.00|4500|32|
|054|24|18.00|-18.00|4500|128|



## ~~**Coil data** (continued)~~ 

|~~**Coil data**(continued)~~|~~**Coil data**(continued)~~|~~(continued)~~||||
|---|---|---|---|---|---|
|**Coil versions, SMT, bistable 1 coil**||**Coil versions, SMT, bistable 1 coil**|**Coil versions, SMT, bistable 1 coil**|||
|Coil|Rated|Set|Reset|Coil|Rated coil|
|code|voltage|voltage|voltage|resistance|power|
||VDC|VDC|VDC|Ω ±10%|mW|
|051|5|3.75|-3.75|740|34|
|052|12|9.00|-9.00|4500|32|



A nominal voltage of 24V is feasible with a 12V coil with a series resitor (4500Ω) 

Other coil voltages on request All figures are given for coil without pre-energization, at ambient temperature +23°C. Coils I and II are identical. 

|~~**Insulation Data**~~||
|---|---|
|Initial dielectric strength||
|between open contacts|500Vrms|
|between contact and coil|1500Vrms|
|Initial surge withstand voltage||
|between contact and coil|2500V|
|Capacitance||
|between open contacts|max. 5pF|
|between contact and coil|max. 6pF|
|Clearance/creepage||
|between contact and coil|0.75mm|
|between adjacent contacts|0.75mm|



|~~**RF Data**~~||
|---|---|
|Isolation at 100MHz/900MHz|-30.0dB/-18.0dB|
|Insertion loss at 100MHz/900MHz|-0.12dB/-1.9dB|
|Voltage standing wave ratio (VSWR)||
|at 100MHz/900MHz|1.06/1.75|



|~~**Other Data**~~||
|---|---|
|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content||
|refer to the Product Compliance Support Center at|refer to the Product Compliance Support Center at|
|www.te.com/customersupport/rohssupportcenter||
|Ambient temperature|-40 to +85°C|
|Category of environmental protection,||
|IEC 61810<br>RT III - immersion cleanable|RT III - immersion cleanable|
|Vibration resistance (functional)|20g, 200 to 2000Hz|
||40g, 10 to 200Hz|
|Shock resistance (functional)||
|IEC 60068-2-27  (half sine)|50 g|
|Terminal type<br>PCB terminals and SMT terminals||
|Weight|max. 2g|
|Resistance to soldering heat  THT||
|IEC 60068-2-20|265 °C/10s|
|Resistance to soldering heat SMT||
|IEC 60068-2-58|see reflow profile|
|Moisture sensitive level, JEDEC J-Std-020D|Moisture sensitive level, JEDEC J-Std-020D<br>MSL3|
|Washing<br>Ultrasonic cleaning<br>Packaging unit|not recommended<br>possible|
|THT|2000 pcs.|
|SMT|2400 pcs.|



## **Coil operative range, bistable** 

Umax upper limit of the operative range of the coil voltage (limiting voltage) when coils are 

**==> picture [176 x 156] intentionally omitted <==**

**----- Start of picture text -----**<br>
484644 Umax. - 5 % coil duty at 1 A 65 mW Latching32 mW Latching<br>4.2<br>4<br>3.8<br>3.6<br>3.4 Umax. - 100 % coil duty at 0 A<br>3.2<br>3<br>28<br>2.6<br>2.4<br>2.22 Umax. - 5 % coil duty at  0 A<br>18<br>1.6<br>1.4<br>1.21 Unom. nominal coil voltage<br>08<br>06 Uset min.<br>0.4<br>0.2<br>oO<br>-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90<br>Ambient Temperature [°C]<br>]nom<br>Coil Voltage [U/U<br>**----- End of picture text -----**<br>


continuously energized. 

Uop min lower limit of the operative range of the coil voltage (reliable operate voltage). 

Urel min lower limit of the operative range of the coil voltage (reliable release voltage). 

2 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

03-2017, Rev. 0317 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Signal Relays 

**A** ~~**XICO**~~ **M** 

## **P1 Relay V23026** (Continued) 

## **Dimensions** 

**==> picture [184 x 179] intentionally omitted <==**

**----- Start of picture text -----**<br>
THT version<br>13.0±0.1 7.60±0.1<br>a<br>ro<br>4<br>- |<br>| 4»<br>5.08±0.15<br>PCB layout<br>TOP view on component side of PCB<br>THT version<br>| +<br>a<br>fh |<br>0.3±0.1 6.9-0.2<br>3.5-0.2<br>085 .<br>**----- End of picture text -----**<br>


**==> picture [135 x 133] intentionally omitted <==**

**----- Start of picture text -----**<br>
SMT version<br>P= 13.4±0.1 7.75±0.1 Fe<br>5.08±0.15<br>|<br>Lo 10.9-0.5 ame<br>SMT version<br>0.85±0.1 8.0-0.2<br>0.2-0.15<br>**----- End of picture text -----**<br>


## **Terminal assignment** 

Monostable version rest condition 

Bistable version, 1 coil Bistable version, 2 coils reset condition reset condition a a a a | a 10 8 6 _ 10——8 ‘lee Contacts are shown in reset : condition. Both coils can be used either as set or reset coil. Contact position might change during transportation and must be reset before use. 

3 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

03-2017, Rev. 0317 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Relays 

**AXICOM** 

## **P1 Relay V23026** (Continued) 

## **Processing** 

## **Packing** 

Recommended soldering conditions 

**==> picture [174 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
Soldering conditions according IEC 60058-2-58 and<br>IPC/JEDEC J-STD-020B<br>**----- End of picture text -----**<br>


**==> picture [131 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tube for THT version<br>40 relays per tube,  2000 relays  9.5+0.5 per box<br>**----- End of picture text -----**<br>


**==> picture [233 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
20 - 40 sec Full line: typical<br>240 °C . poet Dotted line: process limits<br>200 irre,<br>180 °C .<br>150 s<br>130 °C forced<br>cooling<br>p 100 100 °C<br>**----- End of picture text -----**<br>


**==> picture [250 x 144] intentionally omitted <==**

**----- Start of picture text -----**<br>
Vapor Phase Soldering:<br>temperature/tim e profile (lead<br>Resistance to soldering heat - Reflow profile and housing peak temperature)<br>260 —<br>220<br>180<br>150<br>120s<br>__<br>max. 3 °C/s<br>25 500 s<br>Time (s)<br>**----- End of picture text -----**<br>


Infrared Soldering: temperature/ time profile (lead and housing Recommended reflow soldering profile peak temperature) 

**==> picture [132 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tape and reel for SMT version<br>480 relays per reel, 2400 relays per box<br>**----- End of picture text -----**<br>


**==> picture [143 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
| 4<br>[oF N<br>xROS<br>ols<br>a Nano’<br>11.6±0.2<br>13.8±0.2<br>**----- End of picture text -----**<br>


**==> picture [55 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Reel dimensions<br>**----- End of picture text -----**<br>


**==> picture [141 x 65] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 60s<br>max. 3 °C/s<br>25<br>Time  (s)<br>p<br>**----- End of picture text -----**<br>


4 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

03-2017, Rev. 0317 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Signal Relays 

**AXICOM** 

## **P1 Relay V23026** (Continued) 

**Product code structure** Typical product code **V23026 A1 002 B201 Type V23026** P1 Series Signal Relay **Version A1** THT, monostable **D1** SMT, monostable **B1** THT, bistable (latching), 2 coils **E1** SMT, bistable (latching), 2 coils **C1** THT, bistable (latching), 1 coil **F1** SMT, bistable (latching), 1 coil **Coil** Coil code: please refer to coil versions table **Contacts B201** 1 form C, 1 CO 

|**Product Code**<br>**Version**<br>**Coil**<br>**Coil voltage**<br>**Part Number**|**Product Code**<br>**Version**<br>**Coil**<br>**Coil voltage**<br>**Part Number**|**Product Code**<br>**Version**<br>**Coil**<br>**Coil voltage**<br>**Part Number**|**Product Code**<br>**Version**<br>**Coil**<br>**Coil voltage**<br>**Part Number**|**Product Code**<br>**Version**<br>**Coil**<br>**Coil voltage**<br>**Part Number**|
|---|---|---|---|---|
|V23026A1006B201<br>V23026A1001B201<br>V23026A1005B201<br>V23026A1002B201<br>V23026A1004B201<br>V23026B1106B201<br>V23026B1101B201<br>V23026B1105B201<br>V23026B1102B201<br>V23026C1056B201<br>V23026C1051B201<br>V23026C1057B201<br>V23026C1052B201<br>V23026C1054B201<br>V23026D1026B201<br>V23026D1021B201<br>V23026D1025B201<br>V23026D1022B201<br>V23026D1024B201<br>V23026E1106B201<br>V23026E1101B201<br>V23026E1105B201<br>V23026E1102B201<br>V23026F1051B201<br>V23026F1052B201|THT version|monostable|**Coil voltage**<br>3VDC|1-1393774-7<br>1393774-1<br>1-1393774-5<br>1393774-8<br>1-1393774-2<br>1393775-3<br>3-1393774-4<br>1393775-2<br>3-1393774-5<br>2-1393774-6<br>2-1393774-0<br>2-1393774-7<br>2-1393774-1<br>2-1393774-4<br>1393776-8<br>1393776-3<br>1422015-9<br>1393776-4<br>1393776-7<br>1393777-3<br>1422015-6<br>1393777-2<br>1393776-9<br>1422015-8<br>4-1393774-3|
||||5VDC||
||||9VDC||
||||12VDC||
||||24VDC||
|||bistable, 2 coils|3VDC||
||||5VDC||
||||9VDC||
||||12VDC||
||||3VDC||
||||5VDC||
||||9VDC||
||||12VDC||
||||24VDC||
||SMT version|monostable|3VDC||
||||5VDC||
||||9VDC||
||||12VDC||
||||24VDC||
|||bistable, 2 coils|3VDC||
||||5VDC||
||||9VDC||
||||12VDC||
||||9VDC||
||||12VDC||



5 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

03-2017, Rev. 0317 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions