131182300000

~~fi~~ nder SWITCH TO THE FUTURE Electronic step, call/reset y ® c and monostable relays GE @nnaer **W/C** Call and reset switches for bathrooms g& xox 4 ps Bathrooms lighting control Bedroom light control eL ~~es~~ eke iFY Lieew, — BS Vins3 eroet, Abode Ww | > rr Living room light control * @ J cm Y Office lighting Outerj : - : |Bi control 

**13 SЕRIES** 

FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products. 

**13 SERIES** 

**K** 

## **13.81 -  Electronic step relay - Rail mount - 1 Pole** 

**==> picture [139 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
13.81 13.91<br>**----- End of picture text -----**<br>


## **13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole** 

- Fixed time (10 minutes) timing function selectable (13.91) 

- Use with 3 or 4 wire connection, with automatic recognition by the relay 

- Control input can be continuously applied 

- Longer mechanical and electrical life, and much quieter than electromechanical step relays 

- “Zero crossing” load switching 

- Can be mounted behind blanking plates, as widely used in residential wiring systems such as; BTicino: Axolute, Matix, Living and Magic, Gewiss: GW24, Vimar: Plana and Idea … (13.91) 

- 35 mm rail (EN 60715) mount (13.81) 

- 1 NO (SPST-NO) 

- 35 mm rail (EN 60715) mount 

- 17.5 mm wide 

   - 1 NO (SPST-NO) 

   - Step relay and timing step relay (10 minutes) 

   - For mounting within residential switch boxes 

- Cadmium free contact material 

## 13.81/91 

## Screw terminals 

||For outline drawing see page 12||
|---|---|---|
||**Contact specification**<br>Contact configuration|1 NO (SPST-NO)<br>1 NO (SPST-NO)|
||Rated current/Maximumpeak current<br>A<br>Rated voltage/<br>Maximum switchingvoltage<br>V AC|16/30 (120 - 5 ms)<br>10/20 (80 - 5 ms)<br>230/—<br>230/—<br>~~en~~|
||Rated load AC1<br>VA<br>Rated load AC15 (230 V AC)<br>VA<br>Nominal lamp rating:<br>230 V incandescent/halogen W|3700<br>2300<br>750<br>450<br>3000<br>1000<br>~~ee~~<br>~~ee~~|
||fluorescent tubes with<br>electronic ballast W|1500<br>500|
||fluorescent tubes with<br>electromechanical ballast W|1000<br>350|
||CFL W|600<br>300<br>~~en~~|
||230 V LED W|600<br>300<br>~~ee~~|
||LV halogen or LED with<br>electronic ballast W|600<br>300|
||LV halogen or LED with<br>electromechanical ballast W|1500<br>500|
||Minimum switchingload<br>mW (V/mA)<br>Standard contact material<br>**Supply specification**<br>Nominal voltage (UN)<br>V AC (50/60 Hz)|1000 (10/10)<br>1000 (10/10)<br>AgSnO2<br>AgSnO2<br>230<br>230<br>~~ee~~|
||V DC|—<br>—<br>~~ee~~|
||Ratedpower<br>V A (50 Hz)/W|3/1.2<br>2/1<br>~~ee~~|
||Operating range<br>AC (50 Hz)<br>DC<br>**Technical data**|(0.8…1.1)UN<br>(0.8…1.1)UN<br>—<br>—<br>~~es~~|
||Electrical life at rated load in AC1<br>cycles|100 · 103<br>100 · 103|
|XI-2017, www.findernet.com|Maximum impulse duration<br>Dielectric strength between: open contacts V AC<br>supply- contacts V AC<br>Ambient temperature range<br>°C<br>Protection category<br>**Approvals**(according to type)|continuous<br>continuous<br>1000<br>1000<br>—<br>—<br>–10…+60<br>–10…+50<br>IP 20<br>IP 20<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~es~~<br>CE He @<br>C€ FAL~~©~~|



**3** 

**13 SERIES** 

- **13.01 - Electronic step/monostable relay Rail mount - 1 Pole** 

## **13.01** igh 

## **13.61.0.024.0000 13.61.8.230.0000** | 

- **13.61 - Multifunction step/monostable relay with reset command - Rail mount 1 Pole** 

- Selectable Step or Monostable operation (13.01) 

- Multifunction (Step, Timing step, Monostable, Light ON) (13.61) 

- Reset feature, for centralized off command (13.61) 

- Set feature, for centralized on command (13.61.0.024) 

- Control input can be continuously applied 

- Longer mechanical and electrical life, and much quieter than electromechanical step relays 

- 12…24 V AC/DC and 110…240 V AC supply versions (13.61) 

- Suitable for SELV applications and available also for supply 12 and 24 V AC/DC (13.01) 

- “Zero-crossing” load switching (13.61) 

- 35 mm rail (EN 60715) mount 

- Cadmium free contact material 

## 13.01/61 

Screw terminals 

- 1 CO (SPDT) 

- Step or monostable relay 

- 35 mm rail (EN 60715) mount 

- 35 mm wide 

- 1 CO (SPDT) 

- Reset feature, for centralized off command 

- Set feature, for centralized on command 

- Multifunction: 

- step relay 

- timing step relay (30s…20min) 

- monostable relay 

- light on 

- 35 mm rail (EN 60715) mount 

   - 1 NO (SPST-NO) 

   - Reset feature, for centralized off command 

   - Multifunction: 

   - step relay 

   - timing step relay (30s…20min) 

   - monostable relay 

   - light on 

   - 35 mm rail (EN 60715) mount 

   - 17.5 mm wide 

- 17.5 mm wide 

For outline drawing see page 12 

||**Contact specification**<br>Contact configuration|1 CO (SPDT)<br>1 CO<br>1 NO||
|---|---|---|---|
||Rated current/Maximumpeak current<br>A<br>Rated voltage/<br>Maximum switchingvoltage<br>V AC|16/30 (120 A - 5 ms)<br>16/30 (120 A - 5 ms)<br>16/30 (120 A - 5 ms)<br>250/400<br>250/400<br>250/400<br>~~es~~||
||Rated load AC1<br>VA|4000<br>4000<br>4000<br>~~es~~||
||Rated load AC15 (230 V AC)<br>VA|750<br>750<br>750<br>~~es~~||
||Nominal lamp rating:<br>230 V incandescent/halogen W|2000<br>2000<br>3000||
||fluorescent tubes with<br>electronic ballast W|1000<br>1000<br>1500||
||fluorescent tubes with<br>electromechanical ballast W|750<br>750<br>1000||
||CFL W|400<br>400<br>600<br>~~es~~||
||230 V LED W|400<br>400<br>600<br>~~es~~||
||LV halogen or LED with<br>electronic ballast W|400<br>400<br>600||
||LV halogen or LED with<br>electromechanical ballast W|800<br>800<br>1500||
||Minimum switchingload<br>mW (V/mA)|1000 (10/10)<br>1000 (10/10)<br>1000 (10/10)<br>~~es~~||
|**K**|Standard contact material<br>**Supply specification**|AgSnO2<br>AgSnO2<br>AgSnO2||
||Nominal voltage (UN)<br>V AC (50/60 Hz)|110…125<br>230…240<br>—<br>110…240||
||V DC/AC (50/60 Hz)<br>Ratedpower AC/DC<br>V A (50/60 Hz)/W<br>Operating range<br>V AC (50 Hz)<br>V DC/AC (50 Hz)<br>**Technical data**<br>Electrical life at rated load in AC1<br>cycles<br>Maximum impulse duration<br>Dielectric strength between: open contacts V AC<br>supply- contacts V AC<br>Ambient temperature range<br>°C<br>Protection category<br>**Approvals**(according to type)|12<br>24<br>12…24<br>—<br>2.5/2.5<br>1/0.5<br>3.2/1<br>90…130<br>184…253<br>—<br>90…264<br>10.8…13.2<br>20.6…33.6<br>10.2…26.4<br>—<br>100 · 103<br>100 · 103<br>100 · 103<br>continuous<br>continuous<br>continuous<br>1000<br>1000<br>1000<br>4000<br>2000<br>2000<br>–10…+60<br>–10…+60<br>–10…+60<br>IP 20<br>IP 20<br>IP 20<br>~~a~~<br>~~—ee~~<br>~~es~~<br>~~es~~<br>~~ee~~<br>~~es~~<br>~~es~~<br>~~ee~~<br>~~es~~<br>~~es~~<br>~~rs~~<br>~~rn~~<br>C€ Al|XI-2017, www.findernet.com|



**4** 

**13 SERIES** 

- **13.11 - Call & Reset Relay - Rail mount - 1 Pole 13.12 - Call & Reset Relay - Rail mount - 2 Pole** 

- **13.31 - Electromechanical monostable relay Switch box mount - 1 Pole** 

- Call relay with reset command suitable for residential and commercial applications: public bathroom, hospital, hotel (type 13.11/13.12) 

- Can be mounted behind blanking plates, as widely used in residential wiring systems such as; BTicino: Axolute, Matix, Living e Magic, Gewiss: GW24, Vimar: Plana e Idea … (13.31) 

- 35 mm rail (EN 60715) or flange mount (13.11 and 13.12) 

- Cadmium free contact material (13.31) 

**==> picture [252 x 136] intentionally omitted <==**

**----- Start of picture text -----**<br>
13.11 13.12 13.31<br>ag GE<br>AY,<br>om Sree<br>¢ eece<br>Ls @<br>• 1 CO (SPDT) + 1 NO (SPST-NO) • 1 NO (SPST-NO)<br>**----- End of picture text -----**<br>


- 1 CO (SPDT) 

- Call relay with reset command 

   - Call relay with reset command • Interposing monostable relay 

- 35 mm rail (EN 60715) mount 

   - 35 mm rail (EN 60715) mount • For mounting within • 17.5 mm wide residential switch boxes 

- 17.5 mm wide 

## 13.11/12/31 

Screw terminals 

**==> picture [508 x 450] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||
|---|---|---|---|---|---|---|---|
|*  During impulse only.|
|For outline drawing see page 12|
|Contact specification|
|Contact configuration|1 CO (SPDT)|1 CO (SPDT) + 1 NO (SPST-NO)|1 NO (SPST-NO)|
|Rated current/Maximum peak current|A|sd|12/30|8/15|12/20 (80 A - 5 ms)|
|Rated voltage/|
|Maximum switching voltage|V AC|250/400|250/400|250/400|
|Rated load AC1|VA|3000|2000|3000|
|a|
|Rated load AC15 (230|V AC)|VA|750|400|450|
|a|
|Nominal lamp rating:|
|230 V incandescent/halogen W|1200|800|800|
|fluorescent tubes with|
|electronic ballast W|500|300|400|
|fluorescent tubes with|
|electromechanical ballast W|400|250|300|
|CFL W|300|150|200|
|es|
|230 V LED W|300|150|200|
|a|
|LV halogen or LED with|
|electronic ballast W|300|150|200|
|LV halogen or LED with|
|electromechanical ballast W|500|300|400|
|Minimum switching load|mW (V/mA)|a|500 (5/5)|300 (5/5)|1000 (10/10)|
|Standard contact material|AgCdO|AgCdO|AgSnO2|
|Supply specification|
|Nominal voltage (UN)|V AC (50/60 Hz)|230…240|12 - 24|12 - 230|
|V DC|—|12 - 24|24|
|a|
|Rated power AC/DC|V A (50 Hz)/W|a|1.7/0.7*|3/2.5*|1/0.4|
|Operating range|AC (50 Hz)|a|(0.8…1.1)UN|(0.8…1.1)UN|(0.8…1.1)UN|
|DC|—|(0.8…1.1)UN|(0.8…1.1)UN|
|Technical data|
|Electrical life at rated load in AC1|cycles|100 · 10|[3]|100 · 10|[3]|70 · 10|[3]|
|Maximum impulse duration|ee|10 s (100 ms minimum)|10 s (100 ms minimum)|continuous|
|Dielectric strength between: open contacts V AC|a|1000|1000|1000|
|supply - contacts V AC|a|2000|2000|2000|
|Ambient temperature range|°C|a|–10…+60|–10…+60|–10…+60|
|Protection category|IP 20|IP 20|IP 20|
|O™—OCC|TTTTTTCCSmOCOCSCSC“‘CSC*”|
|Approvals|(according to type)|C€|EAL|

**----- End of picture text -----**<br>


**K** 

**5** 

**13 SERIES** 

## **Ordering information** 

Example:  13 series, electronic step/monostable relay, 35 mm rail (EN 60715) mount, 1 CO (SPDT) 16 A contact, 230 V AC supply. 

## **A B C D 1 3 . 0 1 . 8 . 2 3 0 . 0 0 0 0** 

## **0 0 0** 

## **Series** 

## **Type** 

- 0 =  Step/Monostable, 35 mm rail (EN 60715) mount, 35 mm wide 

- 1 =  Call & Reset relay, 35 mm rail (EN 60715) mount, 17.5 mm wide 

- 3 =  Monostable relay, switch box mounting 

- 6 =  Multifunction relay, 35 mm rail (EN 60715) mount, 17.5 mm wide 

- 8 =  Modular step relay, 35 mm rail (EN 60715) mount, 17.5 mm wide 

- 9 =  Step relay and timing step relay, switch box mounting 

## **No. of poles** 

- 1 =  1 pole 

- 2 =  1 pole CO (SPDT) + 1 NO (SPST-NO) 

## **Supply version** 

0 =  AC (50/60 Hz)/DC 

8 =  AC (50/60 Hz) 

- 9 =  DC 

**A: Contact material** 0 =  Standard 4 =  Standard AgSnO2 (only for 13.31) **B: Contact circuit** 

- 0 =  Standard 

- 3 =  Standard NO (only for 13.31) 

## **Codes / Supply voltage** 

13.01.0.012.0000 12 V AC/DC 13.01.0.024.0000 24 V AC/DC 13.01.8.125.0000 110…125 V AC 13.01.8.230.0000 230…240 V AC 13.11.8.230.0000 230…240 V AC 13.12.0.012.0000 12 V AC/DC 13.12.0.024.0000 24 V AC/DC 13.31.8.012.4300 12 V AC 13.31.9.024.4300 24 V DC 13.31.8.230.4300 230 V AC 13.61.8.230.0000 110…240 V AC 13.61.0.024.0000 12…24 V AC/DC 13.81.8.230.0000 230 V AC 13.91.8.230.0000 230 V AC 

## **Supply voltage** 

012 =  12 V AC/DC (13.01 and 13.12 only) 012 =  12 V AC (13.31 only) 024 =  24 V AC/DC (13.01 and 13.12 only) 024 =  24 V DC (13.31 only) 024 =  12…24 V AC/DC (13.61 only) 125 =  (110…125)V AC (13.01 only) 230 =  (230…240)V AC (13.01 and 13.11) 230 =  110…240 V AC (13.61 only) 230 =  230 V AC (13.31, 13.81 and 13.91) 

## **Technical data** 

|**Insulation**<br>Dielectric strength<br>between control circuit and supply<br>V AC <br>between control circuit and contacts<br>V AC <br>between R-S-A2 and contacts<br>V AC <br>between supplyand contacts<br>V AC <br>between open contacts<br>V AC <br>**Other data**<br>Power lost to the environment<br>without contact current<br>W<br>with rated current<br>W<br>~~——=~~|**13.01.8**<br> 4000|**13.01.0**<br>—|**13.11 - 13.12**<br>—|**13.31 - 13.61**<br>—|**13.31 - 13.61**<br>—|**13.31 - 13.61**<br>—|**13.81 - 13.91**<br>—|**13.81 - 13.91**<br>—|
|---|---|---|---|---|---|---|---|---|
||4000<br>~~——=~~|4000<br>~~——=~~|—<br>~~——=~~|—<br>~~——=~~|||—<br>~~——=~~||
||—<br>~~——=~~|—<br>~~——=~~|2000<br>~~——=~~|—<br>~~——=~~|||—<br>~~——=~~||
||4000<br>~~——=~~|4000<br>~~——=~~|—<br>~~——=~~|2000<br>~~——=~~|||—<br>~~——=~~||
||1000<br>1000<br>**13.01**<br>2.2<br>3.5<br>~~——=~~||1000<br>**13.11 - 13.12**<br>—<br>~~——=~~|1000<br>**13.31**<br>**13.61**<br>0.4<br>1<br>~~——=~~|||1000<br>**13.81**<br>**13.91**<br>1.2<br>0.7<br>~~——=~~||
||||1,5<br>~~——=~~|1.6<br>~~——=~~|1.8<br>~~——=~~||2<br>~~——=~~|1.8|
|Max cable lenght forpush-button connection m<br>~~——=~~|100<br>~~——=~~||100<br>~~——=~~|—<br>~~——=~~|200<br>~~——=~~||200<br>~~——=~~|100|
|Max. no. of illuminated push-button<br>(≤1mA)<br>**Terminals**<br>Max. wire size<br>mm2 <br>AWG|—<br>**13.01**<br>solid cable<br>stranded cable||—<br>—<br>10*<br>15<br>12<br>**13.11 - 13.12 - 13.31 - 13.61 - 13.81 - 13.91**<br>solid cable<br>stranded cable||||||
||1 x 6 / 2 x 4|1 x 6 / 2 x 2.5|1 x 6 / 2 x 4|||1 x 4 / 2 x 2.5|||
||1 x 10 / 2 x 12<br>1 x 10 / 2 x 14<br> 0.8||1 x 10 / 2 x 12<br>1 x 12 / 2 x 14||||||
|Screw torque<br>Nm|||0.8||||||



**13 SERIES** 

**K** 

## **Functions** 

**Type 13.01 Monostable** On closure of a switch between terminals (B2-B3) the output contact will close, and remain so, until the switch opens. **Step relay (bistable)** After every impulse (B1-B2), the output contact changes state - alternately switching from open to closed and vice versa. **13.11 Call and Reset relay 13.12** On momentary closure of the Set switch (S), the output contact closes. Only a momentary closure of the Reset switch (R) will open the output contact. (13.12 only) **13.81 (RI) Step relay** After every impulse, the output contact changes state - alternately switching from open to closed and vice versa. **13.91 (RI) Step relay** After every impulse, the output contact changes state - alternately switching from open to closed and vice versa. **(IT) Timing step relay** On initial impulse the output contact closes and timing starts for the pre-set duration (fixed 10 min); On expiry of the time delay, the output contact opens. During the timing period it is possible to immediately open the contact with a further impulse. 

## **Operating mode setup for type 13.91** 

**RI** → **IT IT** → **RI** 

**==> picture [184 x 102] intentionally omitted <==**

a)  Remove the supply voltage b)  Press the control button 

- c)  Apply the supply to the relay, keeping the button closed. After 3 second, the light will flash twice to indicate the selection of the “IT” function, or flash once for “RI” function. 

**7** 

**13 SERIES** 

## **Functions** 

**K** 

## **Type** 

## **13.61.8.230** 

## **13.61.0.024** 

## **Functions** 

**==> picture [198 x 143] intentionally omitted <==**

**==> picture [198 x 518] intentionally omitted <==**

## **(RM) Monostable** 

On closure of a switch between terminal 3 and Line (or Neutral, in case of 3-wire connection) the output contact will close, and remain so, until the switch opens. 

## **(IT) Timing step relay** 

On initial impulse the output contact closes and timing starts for the pre-set duration T; On expiry of the time delay, the output contact opens. 

During the timing period it is possible to immediately open the contact with a further impulse. Switch-off delay time: 30s…20min 

## **(RI) Step relay** 

After every impulse, the output contact changes state - alternately switching from open to closed and vice versa. 

## **Light ON** 

With this function set - the output contact stays permanently closed. 

## **(RM) Monostable** 

On closure of a switch between terminal 3 and Line (or Neutral, in case of 3-wire connection) the output contact will close, and remain so, until the switch opens. 

## **(IT) Timing step relay** 

On initial impulse the output contact closes and timing starts for the pre-set duration T; On expiry of the time delay, the output contact opens. 

During the timing period it is possible to immediately open the contact with a further impulse. Switch-off delay time: 30s…20min 

## **(RI) Step relay** 

After every impulse, the output contact changes state - alternately switching from open to closed and vice versa. 

## **Light ON** 

With this function set - the output contact stays permanently closed. 

**8** 

**13 SERIES** 

**K** 

## **Wiring diagrams (13.01, 13.11, 13.12 and 13.31)** 

**==> picture [349 x 211] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type 13.01 Type 13.01<br>Step wiring diagram Monostable wiring diagram<br>Red LED indication:   Red LED indication:<br>Continuous = relay ON Continuous = relay ON<br>**----- End of picture text -----**<br>


**==> picture [136 x 138] intentionally omitted <==**

**==> picture [216 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type 13.11<br>Call & reset relay<br>Reset<br>Set<br>**----- End of picture text -----**<br>


**==> picture [56 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type 13.12<br>Call & reset relay<br>**----- End of picture text -----**<br>


**==> picture [182 x 179] intentionally omitted <==**

**----- Start of picture text -----**<br>
Reset<br>Set<br>**----- End of picture text -----**<br>


**Type 13.31** Connection 

**==> picture [86 x 88] intentionally omitted <==**

**9** 

**13 SERIES** 

## **Wiring diagrams (13.61)** 

**Type 13.61.8.230** 3 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF 

**Type 13.61.8.230** 4 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF 

**==> picture [510 x 211] intentionally omitted <==**

**----- Start of picture text -----**<br>
Reset Reset<br>Max 10 (≤ 1 mA)  Max 10 (≤ 1 mA)<br>illuminated push buttons illuminated push buttons<br>**----- End of picture text -----**<br>


**==> picture [291 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type 13.61.0.024 L (+)<br>4 wire connection   12…24 V AC/DC<br>Red LED indication:   N (-)<br>Continuous = relay ON   Reset<br>Blinking = relay OFF<br>Set<br>**----- End of picture text -----**<br>


**Type 13.61.8.230 - Examples of multiple 4 wire connection with centralized reset pushbutton** 

**K** 

**==> picture [471 x 217] intentionally omitted <==**

**10** 

**13 SERIES** 

**K** 

## **Wiring diagrams (13.81 and 13.91)** 

**Type 13.81** 

3 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF 

**==> picture [85 x 116] intentionally omitted <==**

Max 15 (≤ 1 mA) illuminated push buttons 

**Type 13.91** 3 wire connection 

**==> picture [162 x 149] intentionally omitted <==**

Max 12 (≤ 1 mA) illuminated push buttons 

**Type 13.81** 

4 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF 

**==> picture [167 x 185] intentionally omitted <==**

**----- Start of picture text -----**<br>
L<br>N<br>Max 15 (≤ 1 mA)<br>illuminated push buttons<br>**----- End of picture text -----**<br>


**Type 13.91** 4 wire connection 

**==> picture [163 x 136] intentionally omitted <==**

Max 12 (≤ 1 mA) illuminated push buttons 

**11** 

**13 SERIES** 

## **Outline drawings** 

**K** 

13.01 Screw terminal 

**==> picture [39 x 39] intentionally omitted <==**

**==> picture [43 x 102] intentionally omitted <==**

**==> picture [69 x 102] intentionally omitted <==**

**==> picture [50 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
13.12<br>Screw terminal<br>**----- End of picture text -----**<br>


**==> picture [115 x 183] intentionally omitted <==**

13.61 Screw terminal 

**==> picture [106 x 178] intentionally omitted <==**

13.11 Screw terminal 

**==> picture [39 x 39] intentionally omitted <==**

**==> picture [183 x 170] intentionally omitted <==**

**----- Start of picture text -----**<br>
17.5 4.3 56.5<br>13.31/13.91<br>Screw terminal<br>33.8 45 84<br>88.8<br>30.5<br>**----- End of picture text -----**<br>


**==> picture [39 x 39] intentionally omitted <==**

**==> picture [128 x 87] intentionally omitted <==**

**==> picture [52 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
13.81<br> Screw terminal<br>**----- End of picture text -----**<br>


**==> picture [175 x 178] intentionally omitted <==**

**12** 

**13 SERIES** 

**K** 

|**Accessories**|||
|---|---|---|
||**Adaptor for panel mounting,**for type 13.01, 35 mm wide|011.01|
|**011.01**|||
||**Adaptor for panel mounting,**for type 13.11, 13.12, 13.61 and 13.81, 17.5 mm wide|020.01|
|**020.01**|||
|**Sheet of marker tags (CEMBRE Thermal transfer printers)**for relays types<br>13.11, 13.12, 13.61 and 13.81 (48 tags), 6 x 12 mm<br>a<br>-<br>t<br>-<br>-<br>t<br>es<br>es<br>+<br>te<br>a<br>-<br>-<br>t<br>-<br>+<br>&||060.48|
|-<br>-<br>-|||
|-<br>-|||
|7<br>=<br>-|||
|-<br>-<br>-<br>**t-**<br>| aa<br>|o<br>a|||
|Pees|||
|**060.48**|||



Please see general technical information 

**13**