12DP.1-60CI

Amperite Co. 567 52nd Street P.O. Box 329 West New York, NJ 07093 (800) 752-2329 Solving your relay requirements since 1922 www.Amperite.com 

**CI Series … Solid state analog circuitry TDR … One-shot timing mode (interval on) … DPDT (2 form C) isolated 10 ampere relay contacts … Timing selection: Knob adjustable or Fixed … Numerous models timing from 0.1 secs. to 480 secs. … UL File #E96739 (M) … CSA File #LR62586-3** 

## **Timing Mode:** 

Relay contacts transfer and timing cycle begins, upon application of power. At the end of the timing cycle, the relay contacts return to the De-Energized position. Reset occurs upon removal of the input power. 

## **Timing Diagram:** 

## **Contact Information:** 

Arrangement: 2 form C (DPDT) - Diagrams C & D Contact Material: Silver - Cadmium Oxide Rating (Resistive): 10A @ 240V AC Resistive 15A @ 30V DC Resistive 15A @ 120V AC Resistive 1/3 HP @ 120V AC 1/2 HP @ 250V AC Expected Life @ 25°C: 10 Million operations, Mechanical 100,000 operations minimum at rated loads 

Amperite Co. 567 52nd Street P.O. Box 329 West New York, NJ 07093 (800) 752-2329 Solving your relay requirements since 1922 www.Amperite.com 

## **Environmental Information:** 

Temperature Range: Storage: -60°C to +105°C (-76°F to +221°F) Operating: 45°C to +70C (-49°F to +158°F) 

## **Mechanical Information:** 

Termination: 8 Pin Octal Style Plug or 11-Pin Spade Terminal (Dia. C&D) Enclosure: White plastic case. Knob adjustable models have a dial scale for reference only "LCI" version has a black case. Weight: 4 oz (114g) approx. 

## **Outline Dimensions:** 

## **Timing Specifications:** 

Timing - Fixed: 0.1 through 480 secs. Timing Ranges: 0.1 - 60, 60 - 120, 120 - 180, 180 - 240, 240 - 300, 300 - 480 secs. Custom timing is available. Timing Adjustment: Knob adjustable potentiometer. Timing Tolerance: Fixed Units: ±5% Adjustable Units: -0 to +25% of maximum specified delay time. Minimum specified value or less at low end. Repeatability: ±5% Release Time: 60 ms typical, 100 ms maximum. 

## **Initial Dielectric Strength:** 

Between open contacts: 1000V RMS, between adjacent contacts: 1500V RMS, Between contacts & coil: 1500 RMS. 

## **Input Information:** 

Voltage: AC units- 12V, 24V, and l20V DC units- 12V, 24V, 48V & 110V. Other voltages are available. 

Amperite Co. 567 52nd Street P.O. Box 329 West New York, NJ 07093 (800) 752-2329 Solving your relay requirements since 1922 www.Amperite.com 

Power Requirement: AC units: 3 VA or less, DC units: 3 Watts or less. Transient Protection: 1 JOULE MOV. 

Polarity Protection: On DC units - Yes. 

## **Input Voltages & Limits:** 

|Nominal||Minimum||Maximum|
|---|---|---|---|---|
||||||
|12V AC||10V||14V|
||||||
|24V AC||20V||28V|
||||||
|120V AC||105V||130V|
||||||
|12V DC||11V||14V|
||||||
|24V DC||20V||32V|
||||||
|48V DC||41V||55V|
||||||
|110V DC||55V||125V|



## **Wiring Diagrams:** 

## **Ordering Information:** 

Definition of a part number for the Amperite CI Series Time Delay Relay. Example: 

**A:** Denotes nominal input voltage. Voltages available: 12, 24, & 120V AC; 12, 24, 48 & 110V DC. Custom voltages are available. 

**B:** Denotes type of input current required for operation. A=AC - Alternating current; 

Amperite Co. 567 52nd Street P.O. Box 329 West New York, NJ 07093 (800) 752-2329 Solving your relay requirements since 1922 www.Amperite.com 

D=DC - Direct current. 

**C:** Denotes contact form: P= DPDT - 2 form C. 

**D & E:** Denotes range of knob adjustability for timing (in seconds) where: 

D= Minimum time delay. 

E= Maximum time delay for adjustable TDR'S. Note: 1.) Ranges available: 0.1 - 60, 60 - 120, 120 - 180, 180 - 240, 240 - 300 & 300 - 480 secs. Custom Timing is available. 

2.) Both values (D & E) can be replaced by a single value for a factory preset time delay in seconds from 0.1 through 480 secs. 

**F:** Enter "L" if optional 11-pin spade terminals are required (Dia. B &D). 

**G:** Denotes use of solid state analog circuitry of CI Series. 

_Solving Your Relay Requirements Since 1922_