120953-1

**==> picture [523 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
TE Connectivity 2-Piece Power Connectors<br>**----- End of picture text -----**<br>


## **Quick Reference Guide** 

## 2-Piece Power Connectors 

## **THINGS TO CONSIDER WHEN CHOOSING POWER CONNECTORS** 

**Application.** Does the application require a board-to-board, wire-to-board, wire-to-wire, bus bar, card edge or a combination of these types of connectors? 

**Current and Voltage.** Does the connector require power only, or a combination of power and signal? How much current is required in the application?  Keep in mind that power connector performance is typically measured in amperes (or amps). The voltage is also very important as it defines the spacing between the contacts. 

**Hot-Pluggability.** Will the application be mated while under electrical load?  If so, a hot-pluggable connector is required. Many of the products in this guide have been approved for use in hot-plug applications. 

## **TYPICAL POWER CONNECTOR APPLICATIONS** 

- AC to DC and DC to DC 

- Power Supplies 

- High End Computers 

- Servers 

- Data Storage Equipment 

   - High Density Power Distribution 

   - Uninterruptible Power Supplies (UPS) 

   - Removable Battery Packs 

   - Board Stacking 

   - Power Distribution 

- Telecommunications Switches 

te.com/powerconnectors 

te.com **/powerconnectors** 

TE Connectivity 

2-Piece Power Connectors 

## **Application: Hot Swappable Power Supplies (500w–5KW)** 

|**CHARACTERISTICS**|**CHARACTERISTICS**|**CHARACTERISTICS**|**CHARACTERISTICS**|
|---|---|---|---|
|**Connector**|**MULTI-BEAM XLE**|**FLATPAQ**|**MINIPAK HDL**|
|**Current Rating**|Up to 75 A*|32 Amps*|Up to 40 Amps*|
|**Vented Housings**|l||l|
|**Licensed —**<br>**Second source**|l||l|
|**Height (mm)**|12 mm|14 mm|8 mm - 9 mm|
|**Modular**||l||
|**Active Guides**||l||
|**Customizable**|l|l|l|



- Single contact current rating 

**te.com/products/multibeamxle** 

## **MULTI-BEAM XLE Connector** 

- New 6 beam power contact offers up to 75 A current rating and delivers more than 200 Amps/linear inch 

- New 25A low power contact occupies 50% less pcb space than MULTI-BEAM XL power contacts 

- New slim guide sockets reduce the overall PCB footprint 

- Vented housing allows for better heat dissipation 

- Hot-plug capable 

- **Reference Part Numbers*** 6450830-2 

**te.com/products/minipakhdl** 

## **FLATPAQ Connectors** 

## **MINIPAK HDL Connector** 

   - High-density, low profile, power/signal, blind-mate connector 

- 32 Amp high-performance 

- CROWN BAND power contacts 

- True hot-plug power contacts available True hot-plug power contacts available 

- True hot-plug power contacts available True hot-plug power contacts available • Developed to meet next generation • Versatile modular design allows low 1U application by reducing airflow volume customized configurations to impedance meet your specific application • Hot-pluggable power supplies requirements • Contacts rated up to 40 amps and 

   - Contacts rated up to 40 amps and deliver more than 150 amps per linear inch 

- Solder and compliant press-fit termination options available 

## **Reference Part Numbers*** 

- Rugged design features active guide pins 

- **Reference Part Numbers*** 2-1926732-5 6646597-1 2-1926733-5 6646722-1 1926845-6 

**Reference Part Numbers*** 

6450850-2 

## **Rechargeable Batteries (for portable/hand-held electronic devices)** 

## **RECHARGEABLE BATTERIES** 

## **Battery Interconnects** 

- Current capacity — 7 Amps/single contact at 30° T-Rise 

|**RECHARGEABLE BATTERIES**|**RECHARGEABLE BATTERIES**|**RECHARGEABLE BATTERIES**|**RECHARGEABLE BATTERIES**|**RECHARGEABLE BATTERIES**|
|---|---|---|---|---|
|**Part Number**|**Pitch (mm)**|**No. of Positions**|**Mount**|**Style**|
|**1827684-1**|2|7|Vertical Surface Mount|Receptacle|
|**1827654-1**|2|7|Right Angle Thru-Hole|Plug|
|**1-1123688-7**|2.5|10|Vertical Surface Mount|Receptacle|
|**6123978-1**|2.5|4|Right Angle Thru-Hole|Plug|
|**120591-1**|/|1|Horizontal Thru-Hole|Coin Cell|
|**5787430-1**|5|/|Vertical Solder|Right Hand Plug|
|**5787441-1**|5|/|Right Angle Solder|Keyless Plug|



- Choice of right angle or vertical mount headers with left, right or keyless polarization 

- 5 mm pitch headers available for 7.2, 10.8 and 12.0 volts rechargeable batteries 

- *Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers. 

te.com/powerconnectors 

TE Connectivity 

2-Piece Power Connectors 

## **Application: Backplanes** 

## **PRODUCTS** 

**==> picture [477 x 56] intentionally omitted <==**

**----- Start of picture text -----**<br>
Amps/Linear Inch Universal Power Module MULTIGIG RT ICCON MINIPAK HDE Stacked ICCON<br>< 125 l<br>125 – 175 l l<br>175 – 225 l<br>> 225 l<br>**----- End of picture text -----**<br>


**==> picture [68 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
te.com/products/upm<br>**----- End of picture text -----**<br>


## **Universal Power Module (UPM) Connectors (Slim UPM shown)** 

- Varieties of UPM include: standard, high current, slim, low profile 

- 2 performance levels 

- Standard 10 amp contact 

- High current 16 Amp contacts 

- True hot-plug contacts 

- High reliability — up to 250 cycles 

- Different configurations include right angle, vertical, coplanar and mezzanine 

- **Reference Part Numbers*** 1903977-1 (Slim UPM), 1645498-2 (Vertical Plug), 5646954-2 (R/A Plug) 

## **MULTIGIG RT Connectors** 

- 2 mm backplane connectors 

- 20 Amp contacts 

- Three contact mating lengths are available in 1.5 mm sequence levels 

- 1 and 2 row versions to provide maximum trace routing flexibility 

- True hot-plug contacts 

## **Reference Part Numbers*** 

- 1-1410271-1 (Plug) 1410270-2 (Receptacle) 

**te.com/products/iccon** 

## **ICCON Connectors** 

- With and without locking feature 

- 35A current rating 

- Slimline version available, 30% smaller footprint 

- Board-to-board, board–to-busbar, and wire-to-board application options 

- Durable, quick connect/disconnect function for high current space constrained applications 

## **Reference Part Numbers*** 

- 6643274-1 (Vertical Pin), 6643228-1 (R/A Pin), 6643220-1 (SLIMLINE Socket) 

**te.com/products/minipakhde** 

## **MINIPAK HDE Connectors** 

- Designed to compliment other backplane connectors offered by TE including Z-PACK HM-Zd, Z-PACK TinMan and other connectors 

- Very high current density — 18 Amps per contact, over 250 Amps/linear inch 

- Two levels of contact sequencing for mate-first-break-last operation 

**te.com/products/iccon** 

## **Stacked ICCON Connector** 

- Very High Current Density — Up to 200 Amps per inch 

- Occupies less PCB edge space than separate ICCON power and guide modules 

- Designed to compliment Z-PACK and other backplane connectors 

- Right angle connector to mate motherboard-to-daughterboard power distribution systems 

- Ground pin, power pin and mate-first-break-last pin options 

- **Reference Part Numbers*** 2085181-1 (R/A Socket) 1766663-1 (Vertical Pin) 

## **Reference Part Numbers*** 

- 1926226-1 (2x6), 1926229-1 (2x9) 

*Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers. 

te.com/powerconnectors 

TE Connectivity 

2-Piece Power Connectors 

## **Application: Cable Power** 

|**CABLE POWER**|**CABLE POWER**|**CABLE POWER**|**CABLE POWER**|
|---|---|---|---|
|**Products**|**Wire Size**|**Current Rating**|**Specialty**|
|**MULTI-BEAM XLE**|26-8 AWG|up to 50 Amps|Low, high power options in<br>same connector|
|**ET POWER**|14-10 AWG|up to 35 Amps|Low profile|
|**RAPID LOCK**|12-0 AWG|50-250 Amps|BusBar Quick Connect/<br>Disconnect|
|**High Current Universal**<br>**MATE-N-LOK**|30-10 AWG|up to 35 Amps|Panel mount or<br>free hanging versions|
|**AMP Power Series**|300MCM-0 AWG|15-275 Amps|Single & 2 pole<br>Quick Connect/Disconnect|
|**Wave Crimp**|Flat Cable|40-110 Amps|Flat|



**te.com/products/multibeamxle** 

## **MULTI-BEAM XLE Cable Receptacles** 

- X, Y, Z float mount, blind-mate connectors for drawer type applications 

- Allows more angular misalignment than the original MULTI-BEAM XL connector 

- Modular design to meet any application 

- Hot-Pluggable 

- Panel Mount, Slide-to-Lock and Squeeze-to-Release configurations are available 

**te.com/products/wavecrimp** 

## **AMPOWER Wave Crimp System** 

- Flat cable, dissipates heat better than round wire 

- Termination of flat cable requires no stripping. Provides a reliable low resistance, gas tight interface 

- Lower operating temperature than standard round/discrete wires 

- Easily formed into shape, without cable ties 

- Lower cost than laminated bus bars 

**te.com/products/amppowerseries** 

## **AMP Power Series Connectors** 

- Single pole and 2-pole connector housings, crimp snap-in contacts, and accessories 

- Rugged contact design 

- Open barrel contacts 6-20AWG on reels for automatic and semiautomatic machine termination 

- Compatible with industry alternate standard versions 

**te.com/products/universalmatenlok** 

## **High Current Universal MATE-N-LOK II Connectors** 

- Available in 2-15 circuit sizes for free hanging, panel mount, or wire-to-board connection 

- Louvertac band and screw machined contacts provide very high current with low contact resistance 

- No extraction tools required/economical 

- Pin and sockets can be intermixed in the same housing 

**te.com/products/rapidlock** 

**te.com/products/etpower** 

## **RAPID LOCK Bus Bar Connectors** 

## **ET Power Connector** 

- Locking feature retains each contact to mating pin 

   - Up to 35Amps per contact 

   - End-to-end stackability 

- No installation tools required 

   - Low profile, less than 8 mm above PCB 

- Fast, reliable replacement for power lugs 

      - Cable-to-PCB applications 

      - Positive latch retention 

   - Up to 250 Amps per contact; very low • Right angle and vertical mounts contact resistance 

- ~~—__+__+__—~~ te.com/powerconnectors =<TE 

TE Connectivity 

2-Piece Power Connectors 

## **Industry Standards** 

**PRODUCTS Standards Z1 Power Connector MINIPAK HD Guide Hardware MULTI-BEAM XLE Advanced TCA** 1766500-1 1-1469373-1 **PICMG MicroTCA.0** 1469920-1 **VITA 41** 1410465-1 **VITA 46** 1410956-1 **VITA 62** 6450843-6 **Note:** Part numbers listed in the above table are some available samples for each standard. There are other part numbers and configurations to choose from. **AdvancedTCA MicroTCA VITA 41 VITA 46 VITA 62** The PICMG 3.0 The PICMG Referred to as VXSBased on VMEbus The latest in VITA AdvancedTCA standard MicroTCA.0 standard is VME Switched Serial in technology, the standard Standards, VITA 62 is defines architecture complimentary to the the next generation of is defined for 3U and 6U currently being defined for modular computing AdvancedTCA standard, VME backplanes and formats and merges the and will use the standard components within but is optimized for introduces features like latest in connector and VPX 3V16U form factor and communications network smaller scale and improved bandwidth, packaging technology comply to requirements infrastructure. The more price sensitive backward compatibility with the latest in bus and defined in VITA. 48.0. VITA standardization focuses applications. and increased power serial fabric technology. 62 will define the power on providing superior delivery into the existing generation requirements power and cooling VMEbus technology. for a module that can be capabilities in solutions used to power systems that are cost effective, that support a VITA 62 slot highly available and on the VPX backplane. highly scalable. tes - w **te.com/products/guidehardware te.com/products/multibeamxle te.com/products/atcapower** 

**te.com/products/guidehardware** 

## **Guide Hardware** 

## **MULTI-BEAM XLE Connector** 

## **Z1 Power Connector** 

- Guide modules are available for the AdvancedTCA, VITA 41.0 VXS and the VITA 46.0 VPX standards 

- VITA 62 standard developed around MULTI-BEAM XLE connector 

   - Designed to PICMG 3.0 AdvancedTCA standard 

- New 6 beam power contacts offer a 50A current rating and lower mating force 

   - Combines 8 high conductivity size 16 pin & socket contacts with 22 size 22 pin & socket contacts 

- Most guide modules are keyed to prevent misalignment during boardto-board mating 

   - New 20A low power contact • Capable of carrying 20 Amps per occupies 50% less PCB space than contact and the signals are capable MULTI-BEAM XL power contacts of carrying 2 Amps per contact 

- ATCA guide modules are available for a variety of applications including front board, mid plane, backplane and rear transition modules as specified in the AdvancedTCA specification 

   - Vented housing allows for better heat dissipation 

- MULTIGIG RT guide modules meet the VITA 46.0 VPX and VITA 41 VXS standards 

## **MINIPAK HD Connectors** 

- Designed to the MicroTCA.0 standard 

- 30 microinches gold plating over nickel 

- Hot-plug contact design controls arc during hot-mate/un-mate cycles 

- Available to carry up to 14.5 Amps per contact fully loaded 

For more information on TE Industry Standard Products visit: **te.com/products/atca** 

**te.com/products/minipakhd** 

AdvancedTCA, MicroTCA and PICMG are trademarks of PICMG-PCI Industrial Computer Manufacturers Group, Inc. VITA, VMEbus, VPX, and VXS are trademarks of VITA. 

~~i~~ te.com/powerconnectors TE 

## **Application Diagram** TE Connectivity 

## 2-Piece Power Connectors 

## **Integrated Backplane Power Systems** 

- Universal Power Modules (UPM) 

- MINIPAK HDE Connectors 

- MULTIGIG RT Power Modules 

- Guide Hardware 

- Z1 Power (AdvancedTCA) Connectors 

## **Bus Bar-to-Board** 

- ICCON Connectors 

- RAPID LOCK Connectors 

## **Laptops/Portables** 

- Battery Interconnects 

## **Power — Board-to-Board** 

- MULTI-BEAM XLE Connectors 

- FLATPAQ Modular Connectors 

- MINIPAK HDL Connectors 

- MINIPAK HD (MicroTCA) Connectors 

## **Power — Cable-to-Cable/Board** 

- Universal MATE-N-LOK Product 

- AMPOWER Wave Crimp System 

- ET Power Connector 

- MULTI-BEAM XLE Cable Receptacles 

- RAPID LOCK Connectors 

## **FOR MORE INFORMATION** 

## **TE Technical Support Center** 

USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 

Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree 

## **Visit Us On the WEB!** 

## For your power connector needs go to: **te.com/products/powerconnectors Check out our selection of videos on YouTube!** 

## **Refer to our catalog:** 

## **Power Connectors & Interconnection Systems Catalog # 1773096** 

## **Sample Kits!** 

Sample kits are available for various Power Connectors. Contact your local TE Sales Representative for more information or visit www.te.com 

Most products in this brochure have been qualified by UL and/or CSA. 

## **te.com** 

© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 

- 4-1773458-1  CIS  LUG  FP  1M  02/2012 

AMP, AMPOWER, CROWN BAND, FLATPAQ, ICCON, MATE-N-LOK, MINIPAK HDE, MINIPAK HDL, MULTI-BEAM XL, MULTI-BEAM XLE, MULTIGIG RT, RAPID LOCK, Z-PACK, Z-PACK TINMAN, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. 

While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. te.com/powerconnectors Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.