11800.0-00

**FF 018  Filter Fan   14 - 69 cfm** 

**Very low noise Minimal mounting depth** 

**Functional design** ~~a~~ **Time-saving installation** ~~to~~ **Weather and UV resistant** 

Filter fans are used to provide an optimum climate in enclosures.  The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air.  The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating.  The plastic used for the hood of this filter fan series is highly weather resistant, as well as impact and UV light resistant. 

## **|** 

**==> picture [155 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Enclosure ventilation using a filter fan and exhaust filter<br>**----- End of picture text -----**<br>


## **Special features** 

**==> picture [301 x 238] intentionally omitted <==**

**----- Start of picture text -----**<br>
Technical Data<br>Axial fan, ball bearing service life min. 50,000h at 77°F (25°C) and 65% RH<br>aluminum fan body, plastic rotor<br>Connection 2 wires w/ cage clamps, AWG 14 (2.5mm²), length 4” (100mm)<br>Housing (filter fan and exhaust filter) Plastic, UL 94V-0, light grey<br>Hood (filter fan and exhaust filter) Plastic, UL 94V-0, light grey;<br>weather and UV light resistant according to UL 746C (f1)<br>Mounting frame with double-sided industrial adhesive for mounting to the<br>outside of enclosure; certain operating circumstances may<br>make the additional use of screws necessary;  cut-out<br>template included<br>Filter media rating G4 acc. to DIN EN 779, filtering degree 94%<br>Filter material synthetic fiber with progressive construction, temperature<br>resistant to 212°F, self-extinguishing class F1;<br>moisture resistant to 100% RH, reusable - can be cleaned by<br>washing or vacuuming<br>Operating / Storage temperature +14 to +158°F (-10 to +70°C) / -40 to +158°F (-40 to 70°C)<br>Protection class I (grounded)<br>Protection type IP55 (according to VDE), UL Type 1<br>Note:  Using fine filter mat F5 increases the protection to UL Type 12 but reduces the air flow<br>**----- End of picture text -----**<br>


The **self-adhesive seal** of the mounting frame prevents dust and water from entering the cabinet. 

**Functional design** of the intake and exhaust fan hoods very effectively prevents direct infiltration of falling water and dust.  The advantage is that the filter mat does not rapidly become contaminated with dirt and therefore does not need to be exchanged as often. 

The **air channeling** makes the filter fan particularly quiet in operation. 

All filter fan models are also available with **integrated airflow monitor** . 

The **direction of air flow can easily be switched** by reversing the axial fan. 

EMC versions and other voltages are available upon request. 

|**Part No.**<br>~~SS~~|**Operating**<br>**voltage**<br>~~SS~~|**Air volume,**<br>**free blowing**<br>~~SS~~|**Air volume**<br>**with**<br>**exhaust filter**<br>~~————————~~|**Power**<br>**consumption**<br>~~————————~~|**Average noise level**<br>**(DIN EN ISO 4871)**<br>~~————————~~|**Mounting**<br>**depth**<br>~~————————~~|**Enclosure**<br>**cut-out**<br>~~————————~~|**Weight**<br>**(approx.)**<br>~~————————~~|**Approvals**|
|---|---|---|---|---|---|---|---|---|---|
|01800.0-00<br>~~SS~~|230VAC, 50Hz1)<br>~~SS~~|12 cfm (21m³/h )<br>~~SS~~|9 cfm (16m³/h)<br>~~————————~~|13W<br>~~————————~~|31dB (A)<br>~~————————~~|1.8” (45mm)<br>~~————————~~|3.8 x 3.8”<br>~~————————~~|1.3 lbs. (0.6kg)<br>~~————————~~|UL File No. E234324, VDE|
|01800.0-01<br>~~SS~~|120VAC, 60Hz<br>~~SS~~|14 cfm (24m³/h)<br>~~SS~~|11 cfm (18m³/h)<br>~~————————~~|13W<br>~~————————~~|31dB (A)<br>~~————————~~|1.8” (45mm)<br>~~————————~~|3.8 x 3.8”<br>~~————————~~|1.3 lbs. (0.6kg)<br>~~————————~~|UL File No. E234324|
|01801.0-00<br>~~SS~~|230VAC, 50Hz1)<br>~~SS~~|32 cfm (55m³/h)<br>~~SS~~|25 cfm (42m³/h)<br>~~————————~~|15W<br>~~————————~~|40dB (A)<br>~~————————~~|2.3” (58mm)<br>~~————————~~|4.9 x 4.9”<br>~~————————~~|2.2 lbs. (1.0kg)<br>~~————————~~|UL File No. E234324, VDE|
|01801.0-01<br>~~SS~~<br>~~———~~|120VAC, 60Hz<br>~~SS~~<br>~~———~~|37 cfm (63m³/h)<br>~~SS~~<br>~~———~~|28 cfm (48m³/h)<br>~~————————~~|15W<br>~~————————~~|40dB (A)<br>~~————————~~|2.3” (58mm)<br>~~————————~~|4.9 x 4.9”<br>~~————————~~|2.2 lbs. (1.0kg)<br>~~————————~~|UL File No. E234324|
|01802.0-00<br>~~SS~~<br>~~———~~<br>~~a~~|230VAC, 50Hz1)<br>~~SS~~<br>~~———~~<br>~~a~~|60 cfm (102m³/h)<br>~~SS~~<br>~~———~~<br>~~——~~|40 cfm (68m³/h)<br>~~————————~~<br>~~—— ee~~|15W<br>~~————————~~<br>~~ee~~|39dB (A)<br>~~————————~~<br>~~ee~~|3.4” (86mm)<br>~~————————~~<br>~~ee~~|6.9 x 6.9”<br>~~————————~~<br>~~ee~~<br>~~ee~~|2.9 lbs. (1.3kg)<br>~~————————~~<br>~~ee~~|UL File No. E234324, VDE<br>~~ee~~|
|01802.0-01<br>~~———~~<br>~~a~~|120VAC, 60Hz<br>~~———~~<br>~~a ~~|69 cfm (117m³/h)<br>~~———~~<br> ~~——~~|46 cfm (78m³/h)<br>~~—— ee~~|15W<br>~~ee~~|39dB (A)<br>~~ee~~|3.4” (86mm)<br>~~ee~~|6.9 x 6.9”<br>~~ee~~<br>~~ee~~|2.9 lbs. (1.3kg)<br>~~ee~~|UL File No. E234324<br>~~ee~~|



1) air volume increases by 15% when operating 230VAC filter fans at 60Hz 

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application. 

STEGO, Inc.  ·  1395 South Marietta Parkway  ·  Building 800  ·  Marietta, GA 30067  ·  Tel: (770) 984-0858  ·  Fax: (770) 984-0615 **Toll free: 1-888-783-4611 (US & Canada only)  ·  www.stegousa.com** 

**FF 018  Filter Fan   14 - 69 cfm** 

## **Time-saving assembly and maintenance** 

**==> picture [217 x 136] intentionally omitted <==**

**----- Start of picture text -----**<br>
Installation sketch<br>**----- End of picture text -----**<br>


STEGO's filter fans are easily installed by one person **from outside** the cabinet. 

1.)  Make cut-out in the cabinet wall.  The cut edge of the cabinet opening should be free of dirt, filings and grease. A template for the enclosure cut-out is included with the filter fan. 

2.)  Remove protective film from the sealing strips on the mounting frame. Press mounting frame into the cabinet opening.  The frame stays permanently in the cabinet. 

3.)  Electrically connect the axial fan using the cage clamp connectors.  Push the unit into the mounting frame.  Affix using screws if necessary. 

4.)  Insert the filter mat in the hood. Clip on. Finished. 

To change the filter mat, simply remove the filter hood, insert the new mat and snap the hood back again.  No tools are required.  Maintenance of the fan can easily be performed without removing the mounting frame (2). 

## **Dimensional Drawing** 

**==> picture [484 x 95] intentionally omitted <==**

**----- Start of picture text -----**<br>
” ” 1.6” 2.3” 6.2” 2.0” 3.4” 8.2”<br>1.4” 1.8 5.1<br>3.8” 5.3” 4.9” 6.7” 6.9” 8.9”<br>**----- End of picture text -----**<br>


## **Drilling template for mounting frame** 

**==> picture [67 x 64] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.3” (109 mm)<br>Ø1/8” (3mm)<br>4.3” (109 mm)<br>**----- End of picture text -----**<br>


**==> picture [85 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
5.4” (137 mm)<br>Ø1/8” (3mm)<br>5.4” (137 mm)<br>**----- End of picture text -----**<br>


**==> picture [116 x 109] intentionally omitted <==**

**----- Start of picture text -----**<br>
7.4” (188 mm)<br>Ø1/8” (3mm)<br>7.4” (188 mm)<br>**----- End of picture text -----**<br>


## **EF 118  Exhaust Filter** 

|**Part No.**|**Mounting depth**|**Enclosure cut-out**|**Weight (approx.)**|**Filter mat**<br>|**Protection type**|**Approvals**|
|---|---|---|---|---|---|---|
|11800.0-00|0.6” (16mm)|3.8 x 3.8”|0.6 lbs. (0.3kg)|G4 acc. to DIN EN 779, filtering degree 94%|IP55*|UL File No. E234324|
|11801.0-00|0.6” (16mm)|4.9 x 4.9”|0.8 lbs. (0.4kg)|G4 acc. to DIN EN 779, filtering degree 94%|IP55*|UL File No. E234324|
|11802.0-00|0.6” (16mm)|6.9 x 6.9”|1.3 lbs. (0.6kg)|G4 acc. to DIN EN 779, filtering degree 94%|IP55*|UL File No. E234324|



*according to VDE 

## **FM 086  Filter Mats** 

|**Filter mat**|**3.5 x 3.5” (89 x 89mm)**|**4.6 x 4.6” (118 x 118mm)**|**6.6 x 6.6” (168 x 168mm)**|
|---|---|---|---|
|G4 (1packingunit = 3pcs.)|Part No. 08600.0-00|Part No. 08601.0-00|Part No. 08602.0-00|
|F5 (1packingunit = 3pcs.)|Part No. 08603.0-00|Part No. 08604.0-00|Part No. 08605.0-00|



Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application. 

STEGO, Inc.  ·  1395 South Marietta Parkway  ·  Building 800  ·  Marietta, GA 30067  ·  Tel: (770) 984-0858  ·  Fax: (770) 984-0615 **Toll free: 1-888-783-4611 (US & Canada only)  ·  www.stegousa.com**