110536-1007

CANNON 

## KPT / KPSE / KPTC Connectors 

**==> picture [148 x 218] intentionally omitted <==**

## ITT Corporation 

ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial markets. Building on its heritage of innovation, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life. Founded in 1920, ITT is headquartered in White Plains, N. Y., with employees in more than 35 countries and sales in a total of approximately 125 countries. The company generated 2012 revenues of $ 2.2 billion. For more information, visit www.itt.com. 

Our connector portfolio remains the most extensive in the industry, offering a reliable and cost effective range of interconnect solutions with the brands of Cannon, VEAM and BIW Connector Systems. Continuous investment in technology and research & development have enabled ITT to provide new, innovative products and solutions to markets including: 

**==> picture [65 x 34] intentionally omitted <==**

www.ittcannon.com 

2 

Our connector portfolio remains the most extensive in the industry, offering a reliable and cost effective range of interconnect solutions 

www.ittcannon.com 

3 

## Introduction to KPSE /KPT /KPTC 

ITT Cannon's miniature circular connector series KPT, KPSE and KPTC conform to meet the performance specification to MIL-C-26482 with a positive three point bayonet coupling, five-keyway polarization and high insert arrangement contact density. 

## Purpose 

- General purpose solder connectors (KPT) –  Our solution for small / prototype quantities using solder type contacts 

- High versatility general purpose versions using crimp or solder contacts (KPTC) 

- Our commercial version for higher volume production with option for solder contacts 

- High performance crimp connectors (KPSE) 

- Our solution for volume production optimized for fast assembly featuring “clip-in” contact & insulator design 

- Military approved versions according to VG95328 or MIL-C-26482 

The broad product range provides the most complete family of connectors conforming to VG95328 and MIL-C-26482 specifications. 

## Highlights 

- All connectors conforming to the above mentioned standards are fully intermateable and accept a wide range of interchangeable accessories. 

- Design modifications can be achieved easily and a lower cost using Cannons KPSE / KPT or KPTC versions 

- VG95328 versions are based on MIL-C-26482 but comply to ECC directives and offer additional shielded versions 

- KPTC is based on MIL-C-26482 but offers a greater versatility in contacts, backshells and plating options 

- “Blue Generation” RoHS compliant, 500 hours salt spray and conductive plating is offered next to the standard Nickel, Zinc Cobalt or Cadmium platings. 

## **Contact us for detail or your request for a customized solution.** 

**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

4 

## Product overview 

||**KPT**<br>**KPSE**<br>**KPTC**|**KPT**<br>**KPSE**<br>**KPTC**|
|---|---|---|
|**Material and Finishes**|||
|Shell|Aluminum alloy<br>Aluminum alloy<br>Aluminum alloy<br>Various RoHS compliantplatingoptions are available like Zinc cobalt,Zinc Nickel and Nickelplus none compliant Cadmium||
|Insulator|Polychloroprene<br>Polychloroprene<br>Polychloroprene||
|Grommet and seal|Polychloroprene<br>Polychloroprene<br>Polychloroprene||
|Contacts|Copper alloy,gold and tinplated<br>Copper alloy,gold and tinplated<br>Copper alloy, hardgold and tinplated||
|**Mechanical Data**|||
|Shell styles|00 – Wall mountingreceptacle<br>07 – Jam nut receptacle||
||01 – Cable connecting plug<br>08 – Plugwith 90° termination assemblies||
||02 – Box mountingreceptacle<br>B – Thru-bulkhead receptacle (KPT only)||
||06 – Straightplug||
|Shell size|8 through 24||
|Polarization / Coupling|Five keyways / 3-point bayonet||
|Service classes|A – General duty||
||E – Grommet seal||
||F – Grommet seal with strain relief||
||PG – PGgland adapters||
||ME – metricgland adapters||
|Environmental sealing|According to VG95319 Part 2, Test No. 5.9.2 | For styles A to E and Z1, Z2 and Z3 and gaskets style A only,<br>testpressure 0,2 bar overpressure,test duration 48 h,test temperature 25 ±3°C,connector shall be free of moisture||
|Operatingtemperature||–55 / +125°C|
|Durability||500 matingcycles|
|Vibration||200 m/s²at 10 to 2000 Hz|
|**Electrical Data**|||
|Number of contacts|2 through 61|3 through 61<br>2 through 61|
|Wire size AWG|16 through 24|12 through 24<br>0,4 – 2,0 mm²|
|Contact termination|Solder|Crimp<br>Crimp, solder|
||||
||**KPT /KPSE /KPTC**||
|**Contact rating**|Size<br>Rated current A|Test current A<br>Millivolt drop mV<br>7,5<br>13,0<br>Less than 55<br>Less than 50|
||20<br>16<br>7,5<br>13,0||
|**Insulation resistance**|~ 5000 MΩ||
|**Exceptions**<br>Service rating between<br>the central contact and<br>the housing of the<br>coaxial contact|Test voltage|Service class<br>Vrms<br>VDC|
||Seal Level|1<br>1500<br>2100|
|||2<br>2300<br>3200|
||21336 m / 70 000 ft.<br>1<br>375<br>535<br>2<br>550<br>770<br>Operatingvoltage(with scoop proof connectors operatingvoltages acc. to MIL-C-26482 and VG95328 arepermitted)|1<br>375<br>535|
||Service class<br>VG95328<br>MIL-C-26482||
||1<br>140 VDC/100 VAC<br>850 VDC/600 VAC||
||2<br>165 VDC/115 VAC<br>1400 VDC/1000 VAC||



**Operating voltage** When the connectors in this catalogue are used for voltages greater than 50 Volts and have touchable conductive shell parts they must be used in accordance with the safety regulations DIN VDE Part 140; IEC 60364-4-41. This regulation basically dictates that the power source should be turned off before any mating and unmating of the connector. This regulation does not provide protection against electrical shock when mating and unmating the connectors in the live condition. 

Dimensions shown in mm | Specifications and dimensions subject to change 

**==> picture [65 x 34] intentionally omitted <==**

www.ittcannon.com 

5 

## Table of contents 

Product overview ................................................. 5 How to use this catalogue .................................... 7 Part number creation ........................................... 8 Ordering reference ...............................................10 Contact arrangements ..........................................12 Alternate insert positions ......................................15 Wall mounting receptacles ...................................16 Cable connecting plugs ........................................17 Box mounting receptacles ....................................18 Thru-bulkhead receptacles ....................................18 Straight plugs ......................................................19 Jam nut receptacles ..............................................21 Right angle plugs .................................................22 

## **Special versions** 

Connectors with grounding continuity..................23 Receptacles with straight solder pins ....................26 

## **Accessories and tooling** 

Panel cutouts .......................................................27 Protective caps .....................................................28 Dummy receptacle ...............................................30 Cross reference lists  .............................................31 Tools and Accessories  ..........................................32 KPSE contact and sealing principle  .......................33 Product safety information ...................................34 

**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

6 

## How to use 

This catalog is split in several sections that help you to 

- get a general overview of all product lines (product overview) 

- create a product part number step by step (part number creation OR ordering reference) 

- get all required detail information (dimensions, product details) 

- get all required support products (accessories, tooling) 

The fastest way to find your product of choice is to follow these steps 

1 **Select your product** or “ordering reference” optionusing either the “part number creation” 3 

**Add accessories and tooling** as required on the related pages 

2 **Use the detail pages** options and choose the best solution for your needsto better understand the available 

4 **Use the contact information** us for further questions or to get advise on where you can on the back cover to contact purchase our products 

**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

7 

## Part number creation **plug** 

## Follow these steps to design your connector part number. 

## **STEP 1** Select shell style (plug) 

**Shell Style Plug Shell Style Plug Shell Style Plug Plug straight** Solder **Plug straight** Solder **Plug 90°** Solder KPT06 **shielded** KPT6-DZ KPT08 KPTC6 KPTC6-DZ KPTC8 Crimp Crimp Crimp KPSE06 KPSE6-DZ KPSE08 **STEP 2** Choose backshell **Class A Class F Class E Class PG; ME Class E Class F, 90° Class A, 90°** General Grommet seal **add mod. code DN KPTC only add Mod. code DZ** Grommet seal General duty duty with with strain relief Environmental, Environmental Environmental, grommet seal, with thread with thread thread grommet seal, shielded heat shrink boot adapter and cable clamp heat shrink boot **Class E, 90°** adapter Grommet seal with thread 

|**STEP 3**|**STEP 3**|**STEP 3**Choose layout|see page 12 –14 for layouts|
|---|---|---|---|
|**STEP 4**|**STEP 4**|**STEP 4**Choose gender|P=pin S=socket|
|**STEP 5**|**STEP 5**|**STEP 5**Choose rotation|see page 15 for rotation (omit for normal position)|
|**STEP 6**|**STEP 6**|**STEP 6**Choose modification*|see page 11 for modifications (omit if no modification is required)|



* If a modification is used the initial ‚0‘ in the shell style description is omitted e.g. KPT01 is changed to KPT1. KPTC series does never use the initial ‚0‘ e.g. KPTC6 

## Design your part number as per above steps 

|**KPSE / KPT**|**STEP 1**|**STEP 2**|**STEP 3**||**STEP 4**|**STEP 4**||**STEP 5**||**STEP 6**||
|---|---|---|---|---|---|---|---|---|---|---|---|
|Examples|Shell style|Class / Backshell|Contact arrangement||Contact gender|||Insulation rotation|Mod code (max. 3 codes)||Mod code (max. 3 codes)|
|**Solder Industrial**|KPT6|E|20 – 41||P||||– DZ|||
|**Crimp Industrial**|KPSE6|E|14 – 12||S||–|W|– F42|– A240|– F0|
|||||||||||||
|**KPTC**|**STEP 1**|**STEP 2**|**STEP 3**|**STEP 4**||**STEP 6**||**STEP 5**||**STEP 6**||
|Examples|Shell style|Class / Backshell|Contact arrangement|Contact gender||Plating||Insulation rotation|Mod code (max. 3 codes)||Mod code (max. 3 codes)|
|**Solder Industrial**|KPTC6|E|20 – 41|P||C|||– MA|||
|**Crimp Industrial**|KPTC6|E|14 – 12|S|–|D||W|– PG13,5 – MB|||



Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

8 

## Part number creation **receptacle** 

## Follow these steps to design your connector part number. 

## **STEP 1** Select shell style (receptacle) 

**==> picture [492 x 339] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wall Mount Cable connecting Jam Nut * Box Mount * Thru-Bulkhead<br>Solder Crimp Solder Crimp Solder Crimp Solder Crimp KPTB<br>KPT00 KPSE00 KPT01 KPSE01 KPT07 KPSE07 KPT02 KPSE02 (contacts pre-installed)<br>KPTC0 KPTC0 KPTC1 KPTC7 KPTC7 KPTC2 KPTC2<br>STEP 2  Choose backshell<br>Class A Class F  Class E Class E   Class PG or ME Class E<br>General   Grommet seal   Environmental,   add Mod. code DN Environmental,  add Mod. code DZ<br>duty with   with strain relief grommet seal, Environmental,   KPTC only Environmental,<br>thread no clamp grommet seal, grommet seal<br>heat shrink boot   shielded heat<br>adapter shrink boot<br>adapter<br>ES==|=|=|=|=|= =—===== igeserers|1SosesegedResessed[ssseaesedbsssesesedResosesedSSSseseedeesesese| —————|—|—|——|—|—|— = resesesReeseeeesseeBesesedieeeesenBeeseedBessssd<br>===|=|== ==|==== KesesesedbsesesesdKosegegedReseseees|Rescesess|Resseeees| =—————|——ESE 4 BeasasedBssessdBessesedRessssediseowseeBSo4<br>==|= == ieseeeees|sresesess|Beeseeesd E4E4—|—— a<br>STEP 3  Choose layout see page 12 –14 for layouts<br>STEP 4  Choose gender P=pin S=socket<br>STEP 5  Choose rotation see page 15 for rotation (omit for normal position)<br>STEP 6  Choose modification** see page 11 for modifications (omit if no modification is required)<br>**----- End of picture text -----**<br>


- Shell style 02 (box mount) and 07A (jam nut) doesn‘t accept a backshell 

- ** If a modification is used the initial ‚0‘ in the shell style description is omitted e.g. KPT01 is changed to KPT1. KPTC series does never use the initial ‚0‘ e.g. KPTC6 

## Design your part number as per above steps 

|**KPSE / KPT**|**STEP 1**|**STEP 2**|**STEP 3**||**STEP 4**|**STEP 4**||**STEP 5**||**STEP 6**||
|---|---|---|---|---|---|---|---|---|---|---|---|
|Examples|Shell style|Class / Backshell|Contact arrangement||Contact gender|||Insulation rotation|Mod code (max. 3 codes)||Mod code (max. 3 codes)|
|**Solder Industrial**|KPT02|E|20 – 41||P|||||||
|**Crimp Industrial**|KPSE1|E|14 – 12||S||–|W|– F42|– A240|– F0|
|||||||||||||
|**KPTC**|**STEP 1**|**STEP 2**|**STEP 3**|**STEP 4**||**STEP 6**||**STEP 5**||**STEP 6**||
|Examples|Shell style|Class / Backshell|Contact Arrangement|Contact Gender||Plating||Insulation Rotation|Mod Code (max. 3 codes)||Mod Code (max. 3 codes)|
|**Solder Industrial**|KPTC2|E|20 – 41|P||C|||– MA|||
|**Crimp Industrial**|KPTC0|PG|14 – 12|S|–|D||W|– PG13,5 – MB|||



Dimensions shown in mm | Specifications and dimensions subject to change 

9 

www.ittcannon.com 

## Ordering reference 

## KPT / KPSE / KPTC 

## KP.. 02 E 22 – 36 P W * 

## **Series** 

KPSE – Cannon prefix crimp, contacts supplied 

KPT – Cannon prefix solder, contacts installed 

KPTC – Cannon prefix commercial version, contacts to be ordered separately 

## **Shell type** 

Cannon designation omit 0 in case of a mod code and KPTC 

|00|–|wall mounting receptacle|see page 16|
|---|---|---|---|
|01|–|cable connecting plug|see page 17|
|02|–|box mounting receptacle(class E only), thru-bulkhead recep.|see page 18|
|06|–|straight plug|see page 19/20|
|07|–|jam nut receptacle|see page 21|
|08|–|90° angle plug|see page 22|



## **Class** 

A – general duty with thread 

E – grommet seal, environmental, no clamp 

E – grommet seal, in combination with modification DN or DZ 

F – grommet seal with strain relief 

PG – endbell for PG glands 

ME – endbell for metric glands 

## **Shell size** 

8 – 24 

**Contact arrangement** 

see page 12–14 

## **Contact type** 

P – pin 

S – socket 

## **Alternate insert position** 

W, X, Y and Z (omit for normal position) see page 15 **Modification** see page 11 

* If a modification is used the initial ‚0‘ in the shell style description is omitted e.g. KPT01 is changed to KPT1. KPTC series does never use the initial ‚0‘ e.g. KPTC6 

**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

10 

## KPSE/KPT-Modification codes 

## KPTC-Modification codes 

|Multiple codes can be used in order of listingbelow<br>**KPSE**<br>**KPT**<br>**Endbell**<br>DN – heat shrink boot adapter,grommet seal<br>DN<br>DN<br>DZ – shielded, heat shrink boot adapter,grommet seal<br>DZ<br>DZ<br>F42 – without endbell,grommet and ferrule<br>F42<br>F42<br>**Plating**(Cadmium with olive drab chromateplatingis standard; Alternativeplatings below)<br>A232 – Zinc Cobalt, blackplating(RoHS compliant)<br>A232<br>A232<br>A240 – Zinc Nickelplating(RoHS compliant)<br>A240<br>A240<br>A233 – Zinc Cobalt,greenplating<br>A233<br>A233<br>A34 – Nickelplating(RoHS compliant)<br>A34<br>A34<br>**Contact**<br>F0 – connector without contacts<br>F0<br>F0<br>EX – PCB solderpin 0,76x7mm (style 02 and 07 only)<br>–<br>EX<br>EW – PCB solderpin 0,6x7mm (style 02 and 07 only)<br>–<br>EW|Multiple codes can be used in order of listingbelow<br>**KPTC**|
|---|---|
||**Endbell**|
||DN – heat shrink boot adapter,grommet seal<br>DN|
||DZ – shielded, heat shrink boot adapter,grommet seal<br>DZ|
||F42 – without endbell,grommet and ferrule<br>F42|
||**Endbell for PGglands**(KPTC and KPT)|
||PG09 - thread for shell size 10<br>P9|
||PG11 – thread for shell size12<br>P11|
||PG13,5 – thread for shell size14<br>P13,5|
||PG16 – thread for shell size16<br>P16|
||PG21 – thread for shell size18, 20, 22<br>P21|
||PG29 – thread for shell size 24<br>P29|
||**Endbell for metricglands**(KPTC and KPT)|
||M12 – thread for shell size10<br>M12|
||M16 – thread for shell size12<br>M16|
||M20 – thread for shell size14<br>M20|
||M25 – thread for shell size16, 18, 20<br>M25|
||M32 – thread for shell size 22, 24<br>M32|
||**Plating**|
||Nickelplating(RoHS compliant)<br>C|
||Zinc Cobalt blackplating(RoHS compliant)<br>R|
||Zinc Cobaltgreenplating(RoHS compliant)<br>F|
||Zinc Nickelplating(RoHS compliant)<br>H|
||Cadmium with olive drab chromate<br>D|
||**Contact**|
||Connector supplied with solderpot contacts installed<br>MA|
||Connector supplied with crimpcontacts<br>MB|



## Military approved version 

|||VG95328<br>18 – 1<br>A<br>S N|
|---|---|---|
|**Alternate insert position**<br>see page 15|||
||||



Dimensions shown in mm | Specifications and dimensions subject to change 

**==> picture [65 x 34] intentionally omitted <==**

www.ittcannon.com 

11 

## ContaCt arrangements 

|**No.**|**of contacts**|**Contact arrangements**|**Service rating**|**Service rating**|**Insulator**|**position**|**position**|||
|---|---|---|---|---|---|---|---|---|---|
|||Contact size|||W|X||Y|Z|
|||AWG||||||||
|||**8-2**||1|58|122||–|–|
||2|20||||||||
|||**8-3**||1|60|210||–|–|
||3|20||||||||
|||**8-3A**||1|60|–||–|–|
||3|20||||||||
|||**8-33**||1|90|–||–|–|
||3|20||||||||
|||**8-4**||1|45|–||–|–|
||4|20||||||||
|||**10-6**||1|90|–||–|–|
||6|20||||||||
|||**10-7**||1|90|–||–|–|
||7|20||||||||
|||**10-98**||1|90|180||240|270|
||6|20||||||||
|||**12-3**||2|–|–||180|–|
||3|16||||||||
|||**12-8**||1|90|112||203|292|
||8|20||||||||
|||**12-10**||1|60|155||270|295|
||10|20||||||||
|||**12-14**||1|60|155||270|295|
||14|20||||||||
|||**14-5**||2|40|92||184|273|
||5|16||||||||
|||**14-12**||1|43|90||–|–|
||12|20 (8)||||||||
|||16 (4)||||||||
|||LegendKPTKPSE|<br>authorized per||MIL-C-26482<br>authorized per||||VG95328|



**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

12 

## ContaCt arrangements 

|**No.**|**of contacts**|**Contact arrangements**|**Service rating**|**Insulator**|**position**|||
|---|---|---|---|---|---|---|---|
|||Contact size||W|X|Y|Z|
|||AWG||||||
|||**14-15**|1|17|110|155|234|
||15|20 (14)||||||
|||16 (1)||||||
|||**14-18**|1|15|90|180|270|
||18|20||||||
|||**14-19**|1|30|165|315|–|
||19|20||||||
|||**14-22** |1|–|–|–|–|
||5|12 (4)||||||
|||20 (1)||||||
|||**14A4**|1|–|–|–|–|
||4|Coax RG 188 U||||||
|||(not for receptacle||||||
|||shell style 02)||||||
|||**16-8**|2|54|152|180|331|
||8|16||||||
|||**16-23**|1|158|270|–|–|
||23|20 (22)||||||
|||16 (1)||||||
|||**16-26**|1|60|–|275|338|
||26|20||||||
|||**18-11**|2|62|119|241|340|
||11|16||||||
|||**18-32**|2|85|138|222|265|
||32|20||||||



Legend  KPT  KPSE  authorized per MIL-C-26482  authorized per VG95328 

Dimensions shown in mm | Specifications and dimensions subject to change 

**==> picture [65 x 34] intentionally omitted <==**

www.ittcannon.com 

13 

## ContaCt arrangements 

|||||||**No.**|**of contacts**|**Contact arrangements**|**Service rating**|**Insulator**|**position**|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||||Contact size||W|X|Y|Z|
|||||||||AWG||||||
|||||||||**20A6**|2|90|180|270|–|
||||||||5|12||||||
|||||||||Note: contacts are 1 grounding||||||
|||||||||pin and 4 standard size 12 pins||||||
|||||||||**20-16**|2|238|316|333|347|
||||||||16|16||||||
|||||||||**20-24**|1|70|145|215|290|
||||||||24|20||||||
|||||||||**20-39**|1|63|114|252|333|
||||||||39|20 (37)||||||
|||||||||16 (2)||||||
|||||||||**20-41**|1|45|126|225|–|
||||||||41|20||||||
|||||||||**22-21**|2|16|135|175|349|
||||||||21|16||||||
|||||||||**22-36**|1|72|144|216|288|
||||||||36|20||||||
|||||||||**22-41**||39|135|264|–|
||||||||41|20 (27)|1|||||
|||||||||16 (14)|2|||||
|||||||||**22-55**|1|30|142|226|314|
||||||||55|20||||||
|||||||||**24-61**|1|90|180|270|324|
||||||||61|20||||||



Legend  KPT  KPSE  authorized per MIL-C-26482  authorized per VG95328 

**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

14 

## alternate Insert PosItIon 

The diagram indicates alternate insert positions. 

The six positions N, V, W, Y, Z differ in degree of rotation for various sizes and arrangements. For the exact degree of rotation, for the list of contact arrangements and for alternate positions available, refer to the table at the right. 

**==> picture [148 x 135] intentionally omitted <==**

|**Shell size No. of contacts**<br>**Contact arrangements**<br>**Degree of Rotation**<br>V<br>W<br>X<br>Y<br>Z|**Shell size No. of contacts**<br>**Contact arrangements**<br>**Degree of Rotation**<br>V<br>W<br>X<br>Y<br>Z|
|---|---|
|**8**|2<br>8-2<br>–<br>58<br>122<br>–<br>–|
||3<br>8-3<br>–<br>60<br>210<br>–<br>–|
||3<br>8-3A<br>–<br>60<br>–<br>–<br>–|
||3<br>8-33<br>–<br>90<br>–<br>–<br>–|
||4<br>8-4<br>–<br>45<br>–<br>–<br>–|
|**10**|6<br>10-6<br>–<br>90<br>–<br>–<br>–|
||7<br>10-7<br>–<br>90<br>–<br>–<br>–|
||6<br>10-98<br>–<br>90<br>180<br>240<br>270|
|**12**|3<br>12-3<br>–<br>–<br>–<br>180<br>–|
||8<br>12-8<br>–<br>90<br>112<br>203<br>292|
||10<br>12-10<br>–<br>60<br>155<br>270<br>295|
||14<br>12-14<br>–<br>60<br>155<br>270<br>295|
|**14**|4<br>14A4<br>–<br>–<br>–<br>–<br>–|
||5<br>14-5<br>–<br>40<br>92<br>184<br>273|
||12<br>14-12<br>–<br>43<br>90<br>–<br>–|
||15<br>14-15<br>–<br>17<br>110<br>155<br>234|
||18<br>14-18<br>–<br>15<br>90<br>180<br>270|
||19<br>14-19<br>–<br>30<br>165<br>315<br>–|
||5<br>14-22<br>–<br>–<br>–<br>–<br>–|
|**16**|8<br>16-8<br>–<br>54<br>52<br>180<br>331|
||23<br>16-23<br>–<br>158<br>270<br>–<br>–|
||26<br>16-26<br>–<br>60<br>–<br>275<br>338|
|**18**|11<br>18-11<br>–<br>62<br>119<br>241<br>340|
||32<br>18-32<br>–<br>85<br>138<br>222<br>265|
|**20**|5<br>20A6*<br>–<br>90<br>180<br>270<br>–|
||16<br>20-16<br>–<br>238<br>318<br>333<br>347|
||24<br>20-24<br>–<br>70<br>145<br>215<br>290|
||39<br>20-39<br>–<br>63<br>114<br>252<br>333|
||41<br>20-41<br>–<br>45<br>126<br>225<br>–|
|**22**|21<br>22-21<br>–<br>16<br>135<br>175<br>349|
||36<br>22-36<br>–<br>72<br>144<br>216<br>288|
||41<br>22-41<br>–<br>39<br>135<br>264<br>–|
||55<br>22-55<br>–<br>30<br>142<br>226<br>314|
|**24**|61<br>24-61<br>–<br>90<br>180<br>270<br>324|



* This contact arrangement features five contacts size 12. Four standard contacts and one is a first-to-mate contact. 

Dimensions shown in mm | Specifications and dimensions subject to change 

**==> picture [65 x 34] intentionally omitted <==**

www.ittcannon.com 

15 

## Wall mountIng reCePtaCles KPT00 / KPSE00 / KPTC0 

|Shell size|Ø A|Q|K|M|R|S|Ø T|
|---|---|---|---|---|---|---|---|
||+0,03 – 0,13|Thread Type 2A|±0,1|±0,15|±0,15|max.|±0,15|
|8|12,00|7/16-28UNEF|1,9|11,6|15,1|21,0|3,05|
|10|15,00|9/16-24UNEF|1,9|11,6|18,3|24,2|3,05|
|12|19,05|11/16-24UNEF|1,9|11,6|20,6|26,6|3,05|
|14|22,23|13/16-20UNEF|1,9|11,6|23,0|29,0|3,05|
|16|25,40|15/16-20UNEF|1,9|11,6|24,6|31,3|3,05|
|18|28,58|1-1/16-18UNEF|1,9|11,6|27,0|33,7|3,05|
|20|31,75|1-3/16-18UNEF|2,2|14,25|29,4|36,9|3,05|
|22|34,93|1-5/16-18UNEF|2,2|14,25|31,8|40,1|3,05|
|24|38,10|1-7/16-18UNEF|2,2|15,1|34,9|43,3|3,75|



## **Backshell options** 

|**Type A**|**Type F**|**Type E**|
|---|---|---|
|Shell size<br>Ø D**A**<br>L**A**<br>V**THD**<br>min.<br>max.<br>Thread Type 2A|Ø G**F**<br>H**F**<br>L**F**<br>min.<br>max.<br>max.|Ø B**E**<br>L**E**<br>max.<br>max.|
|8<br>8,5<br>38,0<br>1/2-28UNEF|2,9<br>19,3<br>56,0|14,2<br>32,5|
|10<br>11,8<br>38,0<br>5/8-24UNEF|4,5<br>20,8<br>56,0|17,2<br>32,5|
|12<br>15,0<br>38,0<br>3/4-20UNEF|7,7<br>24,4<br>56,0|20,4<br>32,5|
|14<br>17,9<br>38,0<br>7/8-20UNEF|9,3<br>27,2<br>56,0|23,4<br>32,5|
|16<br>21,1<br>38,0<br>1-20UNEF|12,4<br>28,7<br>56,0|26,6<br>32,5|
|18<br>24,1<br>38,0<br>1-3/16-18UNEF|15,6<br>35,3<br>56,0|29,6<br>32,5|
|20<br>26,5<br>43,1<br>1-3/16-18UNEF|15,6<br>35,3<br>61,0|32,8<br>34,5|
|22<br>30,4<br>43,1<br>1-7/16-18UNEF|18,8<br>39,9<br>61,0|36,0<br>34,5|
|24<br>32,8<br>43,1<br>1-7/16-18UNEF|20,1<br>43,2<br>61,0|39,2<br>34,5|



|||**Mod. DN**||
|---|---|---|---|
|Shell size|Ø D2|L1|L2|
||–0,5|max.|±0,5|
|8|15,6|35,0|12,2|
|10|18,4|35,0|12,2|
|12|23,7|35,0|12,2|
|14|24,5|35,0|12,2|
|16|29,8|37,0|14,5|
|18|32,0|37,0|14,5|
|20|36,1|42,0|15,8|
|22|38,5|42,0|15,8|
|24|41,6|42,0|14,9|



Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

16 

## **CABlE CONNECTING PlUGS** KPT01 / KPSE01 / KPTC1 

|Shell size|Ø A|K|M|Q**THD**|S|Ø Y|
|---|---|---|---|---|---|---|
||+0,03 - 0,13|±0,1|±0,15|Thread Type 2A|max.|max.|
|8|12,00|1,9|11,6|7/16-28UNEF|20,6|23,8|
|10|15,00|1,9|11,6|9/16-24UNEF|23,8|26,9|
|12|19,05|1,9|11,6|11/16-24UNEF|26,15|29,3|
|14|22,23|1,9|11,6|13/16-20UNEF|28,5|31,7|
|16|25,40|1,9|11,6|15/16-20UNEF|30,7|34,1|
|18|28,58|1,9|11,6|1-1/16-18UNEF|33,3|36,5|
|20|31,75|2,2|14,25|1-3/16-18UNEF|36,5|39,6|
|22|34,93|2,2|14,25|1-5/16-18UNEF|39,5|42,8|
|24|38,10|2,2|15,1|1-7/16-18UNEF|42,8|46,0|



## **Backshell options** 

|**Type A**|**Type F**|**Type E**|
|---|---|---|
|Shell size<br>Ø D**A**<br>L**A**<br>V**THD**<br>min.<br>max.<br>Thread Type 2A|Ø G**F**<br>H**F**<br>L**F**<br>min.<br>max.<br>max.|Ø B**E**<br>L**E**<br>max.<br>max.|
|8<br>8,5<br>38,0<br>1/2-28UNEF|2,9<br>19,3<br>56,0|14,2<br>32,5|
|10<br>11,8<br>38,0<br>5/8-24UNEF|4,5<br>20,8<br>56,0|17,2<br>32,5|
|12<br>15,0<br>38,0<br>3/4-20UNEF|7,7<br>24,4<br>56,0|20,4<br>32,5|
|14<br>17,9<br>38,0<br>7/8-20UNEF|9,3<br>27,2<br>56,0|23,4<br>32,5|
|16<br>21,1<br>38,0<br>1-20UNEF|12,4<br>28,7<br>56,0|26,6<br>32,5|
|18<br>24,1<br>38,0<br>1-3/16-18UNEF|15,6<br>35,3<br>56,0|29,6<br>32,5|
|20<br>26,5<br>43,1<br>1-3/16-18UNEF|15,6<br>35,3<br>61,0|32,8<br>34,5|
|22<br>30,4<br>43,1<br>1-7/16-18UNEF|18,8<br>39,9<br>61,0|36,0<br>34,5|
|24<br>32,8<br>43,1<br>1-7/16-18UNEF|20,1<br>43,2<br>61,0|39,2<br>34,5|



|||**Mod. DN**||
|---|---|---|---|
|Shell size|Ø D2|L1|L2|
||– 0,5|max.|±0,5|
|8|15,6|35,0|12,2|
|10|18,4|35,0|12,2|
|12|23,7|35,0|12,2|
|14|24,5|35,0|12,2|
|16|29,8|37,0|14,5|
|18|32,0|37,0|14,5|
|20|36,1|42,0|15,8|
|22|38,5|42,0|15,8|
|24|41,6|42,0|14,9|



Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

17 

**BOx MOUNTING RECEPTAClE** KPT02 / KPSE02 / KPTC2 

|**KPT / KPSE / KPTC**|**KPT / KPTC**|
|---|---|
|Shell size<br>Ø A<br>L<br>Ø N<br>K<br>M<br>R<br>S<br>Ø T<br>+0,03 – 0,13<br>max.<br>max.<br>±0,1<br>±0,15<br>±0,15<br>max.<br>±0,15|Z<br>max.|
|8<br>12,00<br>21,1<br>11,1<br>1,9<br>11,6<br>15,1<br>21,0<br>3,05|12,3|
|10<br>15,00<br>21,1<br>14,3<br>1,9<br>11,6<br>18,3<br>24,2<br>3,05|12,3|
|12<br>19,05<br>21,1<br>17,5<br>1,9<br>11,6<br>20,6<br>26,6<br>3,05|12,3|
|14<br>22,23<br>21,1<br>20,6<br>1,9<br>11,6<br>23,0<br>29,0<br>3,05|12,3|
|16<br>25,40<br>21,1<br>23,8<br>1,9<br>11,6<br>24,6<br>31,3<br>3,05|12,3|
|18<br>28,58<br>21,1<br>27,0<br>1,9<br>11,6<br>27,0<br>33,7<br>3,05|12,3|
|20<br>31,75<br>22,7<br>30,2<br>2,2<br>14,25<br>29,4<br>36,9<br>3,05|10,8|
|22<br>34,93<br>22,7<br>33,4<br>2,2<br>14,25<br>31,8<br>40,1<br>3,05|10,8|
|24<br>38,10<br>22,7<br>36,5<br>2,2<br>15,1<br>34,9<br>43,3<br>3,75|10,0|



## **THRU-BUlKHEAD RECEPTAClES** KPTB 

|Shell size|Ø A|K|L|M|T|R|S|Ø X|
|---|---|---|---|---|---|---|---|---|
||+0,03 – 0,13|±0,1|max.|±0,25|max.|±0,15|max.|±0,15|
|8|12,00|1,8|28,6|14,5|6,0|15,1|21,0|3,05|
|10|15,00|1,8|28,6|14,5|6,0|18,3|24,2|3,05|
|12|19,05|1,8|28,6|14,5|6,0|20,6|26,6|3,05|
|14|22,23|1,8|28,6|14,5|6,0|23,0|29,0|3,05|
|16|25,40|1,8|28,6|14,5|6,0|24,6|31,3|3,05|
|18|28,58|1,8|28,6|14,5|6,0|27,0|33,7|3,05|
|20|31,75|2,5|31,9|17,7|9,2|29,4|36,9|3,05|
|22|34,93|2,5|31,9|17,7|9,2|31,8|40,1|3,05|
|24|38,10|2,5|31,9|17,7|8,0|34,9|43,3|3,75|



Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

18 

**STRAIGHT PlUGS** KPT06 / KPSE06 / KPTC6 

|Shell size|Ø G|Q**THD**|
|---|---|---|
||max.|Thread Type 2A|
|8|19,8|7/16-28UNEF|
|10|23,6|9/16-24UNEF|
|12|26,5|11/16-24UNEF|
|14|30,1|13/16-20UNEF|
|16|33,2|15/16-20UNEF|
|18|35,4|1-1/16-18UNEF|
|20|39,0|1-3/16-18UNEF|
|22|42,1|1-5/16-18UNEF|
|24|45,2|1-7/16-18UNEF|



## **Backshell options** 

|**Type A**|**Type F**|**Type E**|
|---|---|---|
|Shell size<br>Ø D**A**<br>L**A**<br>V**THD**<br>min.<br>max.<br>Thread Type 2A|Ø G**F**<br>L**F**<br>H**F**<br>min.<br>max.<br>max.|Ø B**E**<br>L**E**<br>max.<br>max.|
|8<br>8,5<br>42,0<br>1/2-28UNEF|2,9<br>56,0<br>19,3|14,2<br>32,5|
|10<br>11,8<br>42,0<br>5/8-24UNEF|4,5<br>56,0<br>20,8|17,2<br>32,5|
|12<br>15,0<br>42,0<br>3/4-20UNEF|7,7<br>56,0<br>24,4|20,4<br>32,5|
|14<br>17,9<br>42,0<br>7/8-20UNEF|9,3<br>56,0<br>27,2|23,4<br>32,5|
|16<br>21,1<br>42,0<br>1-20UNEF|12,4<br>59,0<br>28,7|26,6<br>32,5|
|18<br>24,1<br>42,0<br>1-3/16-18UNEF|15,6<br>59,0<br>35,3|29,6<br>32,5|
|20<br>26,5<br>45,0<br>1-3/16-18UNEF|15,6<br>59,0<br>35,3|32,8<br>34,5|
|22<br>30,4<br>45,0<br>1-7/16-18UNEF|18,8<br>59,0<br>39,9|36,0<br>34,5|
|24<br>32,8<br>45,0<br>1-7/16-18UNEF|20,1<br>59,0<br>43,2|39,2<br>34,5|



|||**Mod. DN**||
|---|---|---|---|
|Shell size|Ø D2|L1|L2|
||– 0,5|max.|±0,5|
|8|15,6|35,0|12,2|
|10|18,4|35,0|12,2|
|12|23,7|35,0|12,2|
|14|24,5|35,0|12,2|
|16|29,8|37,0|14,5|
|18|32,0|37,0|14,5|
|20|36,1|42,0|15,8|
|22|38,5|42,0|15,8|
|24|41,6|42,0|14,9|



Dimensions shown in mm | Specifications and dimensions subject to change 

19 

www.ittcannon.com 

**STRAIGHT PlUG** KPT6PG / KPTC6PG 

|Shell size|Ø G|Ø B|C|L**PG**|PG**THD**|
|---|---|---|---|---|---|
||max.|max.|min.|max.||
|10|23,6|19,0|10,5|58,5|PG 09|
|12|26,5|22,5|10,5|58,5|PG 11|
|14|30,1|25,0|10,5|58,5|PG 13,5|
|16|33,2|28,0|10,5|73,0|PG 16|
|18|35,4|32,5|11,5|73,0|PG 21|
|20|39,0|34,5|11,5|76,0|PG 21|
|22|42,1|38,0|11,5|82,0|PG 21|
|24|45,2|40,5|11,5|82,0|PG 29|



## **STRAIGHT PlUG** KPT6ME / KPTC6ME 

|Shell size|Ø G|Ø B|C|L**ME**|Metric Thread|
|---|---|---|---|---|---|
||max.|max.|min.|max.||
|10|23,6|19,0|10,5|58,5|M 12 x 1,5|
|12|26,5|22,5|10,5|58,5|M 16 x 1,5|
|14|30,1|25,0|10,5|58,5|M 20 x 1,5|
|16|33,2|28,0|10,5|73,0|M 25 x 1,5|
|18|35,4|32,5|11,5|73,0|M 25 x 1,5|
|20|39,0|34,5|11,5|76,0|M 25 x 1,5|
|22|42,1|38,0|11,5|82,0|M 32 x 1,5|
|24|45,2|40,5|11,5|82,0|M 32 x 1,5|



Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

20 

**JAM NUT RECEPTAClES** KPT07 / KPSE07 / KPTC7 

|Shell size|Ø A|F|H|K|M|R**THD**|S|T Panel thickness|T Panel thickness|Ø N|
|---|---|---|---|---|---|---|---|---|---|---|
||+0,03 – 0,13|±0,15|±0,15|±0,25|±0,15|Thread Type 2A|±0,5|min.|max.|max.|
|8|12,00|13,3|19,0|3,2|17,7|9/16-24UNEF|24,0|1,6|3,5|28,0|
|10|15,00|16,5|22,2|3,2|17,7|11/16-24UNEF|27,0|1,6|3,5|31,0|
|12|19,05|20,6|27,0|3,2|17,7|7/8-20UNEF|32,0|1,6|3,5|36,0|
|14|22,23|23,8|30,2|3,2|17,7|1-20UNEF|35,0|1,6|3,5|39,0|
|16|25,40|26,9|33,3|3,2|17,7|1-1/8-18UNEF|38,5|1,6|3,5|42,0|
|18|28,58|30,1|36,5|3,2|17,7|1-1/4-18UNEF|41,5|1,6|3,5|45,0|
|20|31,75|33,3|39,7|4,0|22,5|1-3/8-18UNEF|46,0|1,6|6,5|50,0|
|22|34,93|36,5|42,9|4,0|22,5|1-1/2-18UNEF|49,5|1,6|6,5|55,0|
|24|38,10|39,6|46,0|4,0|23,3|1-5/8-18UNEF|52,5|1,6|6,5|57,0|



## **Backshell options** 

|Shell size<br>LF<br>Ø GF<br>HF<br>max.<br>max.<br>max.|Ø BE<br>LE<br>max.<br>max.|L1<br>L2<br>Ø D2<br>max.<br>±0,5<br>max.|Z<br>max.|
|---|---|---|---|
|8<br>44,9<br>2,9<br>19,3|18,2<br>33,5|43,0<br>12,2<br>15,6|7,9|
|10<br>44,9<br>4,5<br>20,8|21,5<br>33,5|43,0<br>12,2<br>18,4|7,9|
|12<br>44,9<br>7,7<br>24,4|24,6<br>33,5|43,0<br>12,2<br>23,7|7,9|
|14<br>44,9<br>9,3<br>27,2|27,8<br>33,5|43,0<br>12,2<br>24,7|7,9|
|16<br>48,4<br>12,4<br>28,7|31,0<br>33,5|45,5<br>14,5<br>29,8|7,9|
|18<br>48,4<br>15,6<br>35,3|34,1<br>33,5|45,5<br>14,5<br>32,0|7,9|
|20<br>50,3<br>15,6<br>35,3|38,1<br>39,0|52,6<br>15,8<br>36,1|4,7|
|22<br>50,3<br>18,8<br>39,9|41,3<br>39,0|52,6<br>15,8<br>28,5|4,7|
|24<br>50,3<br>20,1<br>43,2|44,5<br>39,0|51,6<br>14,9<br>41,6|3,8|



Dimensions shown in mm | Specifications and dimensions subject to change 

21 

www.ittcannon.com 

**RIGHT ANGlE PlUG, 90°** KPT08 / KPSE08 / KPTC8 

|Shell size|Ø G|Q|
|---|---|---|
||max.|Thread Type 2A|
|8|19,8|7/16-28UNEF|
|10|23,6|9/16-24UNEF|
|12|26,5|11/16-24UNEF|
|14|30,1|13/16-20UNEF|
|16|33,2|15/16-20UNEF|
|18|35,4|1-1/16-18UNEF|
|20|39,0|1-3/16-18UNEF|
|22|42,1|1-5/16-18UNEF|
|24|45,2|1-7/16-18UNEF|



## **Backshell options** 

|||**Type A and E**|||**Type F**||
|---|---|---|---|---|---|---|
|Shell size|LAE|DAE|VTHD|L|DF|LF|
||max.|max.|Thread Type 2A|max.|max.|max.|
|8|36,1|20,9|1/2-28UNEF|47,0|31,4|36,1|
|10|38,3|21,7|5/8-24UNEF|49,5|32,2|38,3|
|12|40,9|23,3|3/4-20UNEF|53,5|35,4|40,9|
|14|41,6|24,9|7/8-20UNEF|55,5|38,6|41,6|
|16|42,5|26,5|1-20UNEF|57,0|40,2|42,5|
|18|44,7|28,1|1-3/16-18UNEF|62,5|41,8|44,7|
|20|48,3|29,6|1-3/16-18UNEF|67,0|43,4|48,3|
|22|52,1|31,7|1-7/16-18UNEF|71,5|47,9|52,1|
|24|52,1|33,6|1-7/16-18UNEF|74,0|49,9|52,1|



Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

22 

## **VERSIONS WITH GROUNDING CONTINUITy** KPT / KPSE / KPTC 

## **These connectors are designed to ensure electrical continuity** 

- at the cable shielding level to protect it against radio frequency interferences 

- at the grounding level (if it is connected to the shielding) 

The plugs are manufactured with grounding fingers fixed to the front face of the shell. They make contact with the inner side of the receptacle shell. Plug and receptacle feature a special backshell which supports the cable shielding. The connectors are in accordance with the VG95328 specification. 

## **RECEPTAClE WITH GROUNDING CONTINUITy (for shielded cable)** KPT0E / KPSE0E / KPTC0E… DZ 

|Shell size|Ø A|Ø B|Ø C|Ø D|E|K|L|M|R|S|Ø T|
|---|---|---|---|---|---|---|---|---|---|---|---|
||+0,03 – 0,13|min.|±0,5|max.|±1,0|±0,1|max.|±0,15|±0,15|max.|±0,15|
|8|12,00|6,6|16,0|13,3|15,0|1,9|52,0|11,6|15,1|21,0|3,05|
|10|15,00|9,2|18,0|16,1|15,0|1,9|52,0|11,6|18,3|24,2|3,05|
|12|19,05|12,2|22,0|20,0|17,0|1,9|52,0|11,6|20,6|26,6|3,05|
|14|22,23|15,2|25,0|22,2|18,0|1,9|53,0|11,6|23,0|29,0|3,05|
|16|25,40|18,3|28,0|26,2|18,0|1,9|53,0|11,6|24,6|31,3|3,05|
|18|28,58|20|32,0|28,5|18,0|1,9|53,0|11,6|27,0|33,7|3,05|
|20|31,75|23|34,0|32,5|18,0|2,2|58,0|14,25|29,4|36,9|3,05|
|22|34,93|26|38,0|34,8|18,0|2,2|58,0|14,25|31,7|40,1|3,05|
|24|38,10|28,8|41,0|37,9|18,0|2,2|58,0|15,1|34,9|43,3|3,75|



Dimensions shown in mm | Specifications and dimensions subject to change 

23 

www.ittcannon.com 

**CABlE CONNECTING PlUG WITH GROUNDING CONTINUITy (for shielded cable)** KPT1E / KPSE1E / KPTC1E … DZ 

|Shell size|Ø A|M|Ø B|Ø C|Ø D|E|K|L|S|Ø Y|
|---|---|---|---|---|---|---|---|---|---|---|
||+0,03 – 0,13|±0,15|min.|±0,5|max.|±1,0|±0,1|max.|max.|max.|
|8|12,00|11,6|6,6|16,0|13,3|15,0|1,9|52,0|18,5|21,0|
|10|15,00|11,6|9,2|18,0|16,1|15,0|1,9|52,0|23,0|24,2|
|12|19,05|11,6|12,2|22,0|20,0|17,0|1,9|52,0|29,0|26,6|
|14|22,23|11,6|15,2|25,0|22,2|18,0|1,9|53,0|29,5|29,0|
|16|25,40|11,6|18,3|28,0|26,2|18,0|1,9|53,0|32,0|31,3|
|18|28,58|11,6|20,0|32,0|28,5|18,0|1,9|53,0|35,0|33,7|
|20|31,75|14,25|23,0|34,0|32,5|18,0|2,2|58,0|38,5|36,9|
|22|34,93|14,25|26,0|38,0|34,8|18,0|2,2|58,0|42,0|40,1|
|24|38,10|14,25|28,8|41,0|37,9|18,0|2,2|58,0|46,0|43,3|



## **STRAIGHT PlUG WITH GROUNDING CONTINUITy** KPT6E / KPSE6E / KPTC6E … DZ 

|Shell size|Ø B|Ø C|Ø G|Ø D|E|L|S|
|---|---|---|---|---|---|---|---|
||min.|+0,5|max.|max.|1,0|max.|+0,2|
|8|6,6|16,0|19,1|13,3|15,0|48,0|17,00|
|10|9,2|18,0|22,0|16,1|15,0|48,0|19,00|
|12|12,2|22,0|26,2|20,0|17,0|48,0|23,00|
|14|15,2|25,0|29,4|22,2|18,0|49,0|26,00|
|16|18,3|28,0|32,8|26,2|18,0|49,0|29,00|
|18|20,0|32,0|35,4|28,5|18,0|49,0|33,00|
|20|23,0|34,0|39,0|32,5|18,0|53,0|35,00|
|22|26,0|38,0|42,1|34,8|18,0|53,0|39,00|
|24|28,8|41,0|45,2|37,9|18,0|53,0|42,00|



Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

24 

**JAM NUT RECEPTAClE WITH GROUNDING CONTINUITy (for shielded cable)** KPT 7E / KPSE 7E / KPTC … DZ 

|Shell size|Ø A|Ø B|Ø C|Ø D|E|L|S|T|
|---|---|---|---|---|---|---|---|---|
||min.|+0,5|max.|max.|±1,0|max.|±0,25|±0,25|
|8|6,6|16,0|18,2|13,3|15,0|47,0|23,0|19,0|
|10|9,2|18,0|21,4|16,1|15,0|47,0|27,0|22,2|
|12|12,2|22,0|24,6|20,0|17,0|49,0|31,7|27,0|
|14|15,2|25,0|27,8|22,2|18,0|50,0|34,9|30,2|
|16|18,3|28,0|30,9|26,2|18,0|50,0|38,1|33,3|
|18|20,0|32,0|34,1|28,5|18,0|50,0|41,3|36,5|
|20|23,0|34,0|38,1|32,5|18,0|55,0|46,0|39,7|
|22|26,0|38,0|41,3|34,8|18,0|55,0|49,2|42,9|
|24|28,8|41,0|44,4|37,9|18,0|55,0|52,3|46,0|



## **ASSEMBly OF A CONNECTOR WITH A GROUND CONTINUITy BACKSHEll** KPT / KPSE / KPTC … DZ 

|Shell size|ØC|
|---|---|
||max.|
|8|6,6|
|10|9,2|
|12|12,2|
|14|15,2|
|16|18,3|
|18|20,0|
|20|23,0|
|22|26,0|
|24|28,8|



Dimensions shown in mm | Specifications and dimensions subject to change 

25 

www.ittcannon.com 

## **BOx MOUNTING RECEPTAClE** KPT2 / KPTC2 … EX OR EW 

|Shell size|Ø A|K|L|M|Ø N|R|S|Ø T|
|---|---|---|---|---|---|---|---|---|
||+0,03 – 0,13|±0,1|max.|±0,15|max.|±0,15|max.|±0,15|
|8|12,00|1,9|21,1|11,60|11,1|15,1|21,0|3,05|
|10|15,00|1,9|21,1|11,60|14,3|18,3|24,2|3,05|
|12|19,05|1,9|21,1|11,60|17,5|20,6|26,6|3,05|
|14|22,23|1,9|21,1|11,60|20,6|23,0|29,0|3,05|
|16|25,40|1,9|21,1|11,60|23,8|24,6|31,3|3,05|
|18|28,58|1,9|21,1|11,60|27,0|27,0|33,7|3,05|
|20|31,75|2,2|22,7|14,25|30,2|29,4|36,9|3,05|
|22|34,93|2,2|22,7|14,25|33,4|31,7|40,1|3,05|
|24|38,10|2,2|22,7|15,10|36,5|34,9|43,3|3,75|



## **JAM NUT RECEPTAClES** KPT7 / KPTC7 …EX OR EW 

|Shell size|Ø A|F|H|K|M|RTHD|S|T (Panel Thickness)|Panel Thickness)|Ø N|
|---|---|---|---|---|---|---|---|---|---|---|
||+0,03 – 0,13|±0,15|±0,15|±0,25|±0,15|Thread Type 2A|±0,5|min.|max.|max.|
|8|12,0|13,3|19,0|3,2|17,7|9/16-24UNEF|24,0|1,6|3,5|28,0|
|10|15,0|16,5|22,2|3,2|17,7|11/16-24UNEF|27,0|1,6|3,5|31,0|
|12|19,1|20,6|27,0|3,2|17,7|7/8-20UNEF|32,0|1,6|3,5|36,0|
|14|22,2|23,8|30,2|3,2|17,7|1-20UNEF|35,0|1,6|3,5|39,0|
|16|25,4|26,9|33,3|3,2|17,7|1-1/8-18UNEF|38,5|1,6|3,5|42,0|
|18|28,6|30,1|36,5|3,2|17,7|1-1/4-18UNEF|41,5|1,6|3,5|45,0|
|20|31,8|33,3|39,7|4,0|22,5|1-3/8-18UNEF|46,0|1,6|6,5|50,0|
|22|34,9|36,5|42,9|4,0|22,5|1-1/2-18UNEF|49,5|1,6|6,5|55,0|
|24|38,1|39,6|46,0|4,0|23,3|1-5/8-18UNEF|52,5|1,6|6,5|57,0|



Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

26 

**PANEl CUTOUTS** KPT / KPSE / KPTC 

## **BOx MOUNTING RECEPTAClE** 

**==> picture [130 x 163] intentionally omitted <==**

|Shell size<br>For rear mounting<br>Ø D +0,25 / 0|For front mounting<br>Ø D +0,25 / 0<br>R ±0,15<br>Ø T +0,3|
|---|---|
|8<br>14,0|12,7<br>15,1<br>3,1|
|10<br>17,0|16,0<br>18,3<br>3,1|
|12<br>22,0|19,0<br>20,6<br>3,1|
|14<br>25,0|22,2<br>23,0<br>3,1|
|16<br>28,0|25,5<br>24,6<br>3,1|
|18<br>31,0|28,5<br>27,0<br>3,1|
|20<br>34,5|31,7<br>29,4<br>3,1|
|22<br>37,5|35,0<br>31,8<br>3,1|
|24<br>41,0|38,0<br>34,9<br>3,6|



## **PANEl THICKNESS** 

|Shell size|P – Panel thickness|
|---|---|
||Height of screw head included|
|8|2,2|
|10|2,2|
|12|2,2|
|14|2,2|
|16|2,2|
|18|2,2|
|20|5,4|
|22|5,4|
|24|5,4|



## **JAM NUT RECEPTAClE** 

**==> picture [98 x 132] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

|Shell size|KPT / KPSE|KPT / KPSE|
|---|---|---|
||ØA +0,25 / –0|B +0 / –0,12|
|8|14,5|13,6|
|10|17,7|16,8|
|12|22,7|20,9|
|14|25,7|24,1|
|16|28,8|27,2|
|18|32,0|30,4|
|20|35,1|33,6|
|22|38,4|36,8|
|24|41,5|40,0|



**==> picture [65 x 34] intentionally omitted <==**

27 

www.ittcannon.com 

## ProteCtIve CaPs KPT / KPSE / KPTC 

|**Material**|**Finishes**<br>A34<br>Nickel<br>A232<br>Zinc cobalt, black<br>A233<br>Zinc cobalt, green<br>A240<br>Zinc Nickelplating<br>Standard (A66)<br>Olive drab chromate over cadmium|
|---|---|
|Protective cap<br>Aluminum alloy||
|Sash chain<br>Stainless steel||
|Cord<br>Polyamide||
|Ring<br>Stainless steel||
|Clip<br>Aluminum alloy||
|Gasket<br>Fluor Silicone||
|End link / rivet<br>Stainless steel,passivated||
|Bayonetpin<br>Stainless steel,passivated||



## HoW to order 

**Series** KPT80 – for plug KPT81 – for receptacle **Shell size** 8 – 24 **Termination** D – Nylon cord 400 mm Clip and end link attached (not assembled) Crimp tool for end link: M317 (selector position 6) C – sash chain and terminal link CB – Nylon cord and terminal link N – chain with ring (KPT81 only) NB – Nylon cord with ring (KPT81 only) 

**Modification** A34 – Nickel plated (RoHS compliant) A232 – Zinc cobalt, black (RoHS compliant) A233 – Zinc cobalt, green A240 – Zinc nickel plating (RoHS compliant) A66 (without code) – Olive drab chromate over cadmium 

KPT8010 D- A34 KPTC8010 C- C **Series** KPTC80 – for plug KPTC81 – for receptacle **Shell size** 8 – 24 **Termination** C – Nylon cord and endlink 

**Modification** C – Nickel plated D – Cadmium plated R – Zinc cobalt, black F – Zinc cobalt, green H – Zinc nickel plating 

VG95328 Z2 C 10 **VG Specification** 

**Style** Z1 – for receptacle Z2 – for plug Z3 – for jam nut receptacle **Termination** A – chain and terminal link C – for Z1 and Z2: Nylon cord 400 mm and end link Clip and end link attached (not mounted) Crimp tool for end link: M317 (selector position 6) C – for Z3: Nylon cord with ring 

**Shell size** 8 – 24 

**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

28 

## ProteCtIve CaPs KPT / KPSE / KPTC 

**==> picture [81 x 44] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cap with nylon cord<br>For receptacle<br>KPT81 termination D<br>VG95328 Z1 termination C<br>**----- End of picture text -----**<br>


**==> picture [81 x 23] intentionally omitted <==**

**----- Start of picture text -----**<br>
For plug<br>KPT80 termination D<br>VG95328 Z2 termination C<br>**----- End of picture text -----**<br>


## **Cap with nylon cord and terminal link** 

**For receptacle** KPT81 termination C and CB VG95328 Z1 termination A 

**For plug** KPT80 termination C and CB VG95328 Z2 termination A 

## **Cap with nylon cord and ring** 

**For receptacle** KPT81 termination N and NB VG95328 Z3 termination C 

|Shell size|Ø A|L1|Ø B|L2|H|Ø N|
|---|---|---|---|---|---|---|
||~~m~~ax.|max.|max.|max.|max.|±0,5|
|8|~~1~~8,26|19,84|18,0|21,44|76|14,7|
|10|~~2~~1,44|19,84|20,3|21,44|76|17,9|
|12|~~2~~5,40|19,84|25,1|21,44|89|22,6|
|14|28,58|19,84|~~28,2~~|21,44|89|25,8|
|16|31,75|19,84|~~31,5~~|21,44|89|29|
|18|34,92|19,84|~~34,5~~|21,44|89|32,2|
|20|38,10|21,44|~~37,8~~|21,44|101|35,3|
|22|41,28|21,44|40,9|21,44|101|38,5|
|24|44,45|22,22|44,2|22,22|101|41,7|



Dimensions shown in mm | Specifications and dimensions subject to change www.ittcannon.com 29 ~~Sn~~ 

dummy reCePtaCles KPT/KPSE/KPTC 

## HoW to order 

**==> picture [218 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
KPT 15- 8 A<br>MS 3115- 8 A<br>Series<br>Dummy receptacle<br>Shell size<br>Flange<br>A – Standard<br>**----- End of picture text -----**<br>


**==> picture [117 x 136] intentionally omitted <==**

**==> picture [189 x 155] intentionally omitted <==**

|Shell size|Ø A|K|M|R|S|Ø T|
|---|---|---|---|---|---|---|
||+0,03 – 0,13|±0,4|±0,15|±0,15|max.|±0,15|
|* 8 A|12,00|1,6|12,1|15,1|21,0|3,05|
|* 10 A|15,00|1,6|12,1|18,3|24,2|3,05|
|* 12 A|19,05|1,6|12,1|20,6|26,6|3,05|
|* 14 A|22,23|1,6|12,1|23,0|29,0|3,05|
|* 16 A|25,40|1,6|12,1|24,6|31,3|3,05|
|* 18 A|28,58|1,6|12,1|27,0|33,7|3,05|
|* 20 A|31,75|2,4|14,5|29,4|36,9|3,05|
|* 22 A|34,93|2,4|14,5|31,8|40,1|3,05|
|* 24 A|38,10|2,4|15,4|34,9|43,3|3,75|



* Add “KPT 15 -” or “MS 3115-” prefixes 

**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

30 

## **CROSS REFERENCE lIST** KPT / KPSE / VG95328 / MIL-C-26482 

|**Solder**|**Crimp**|
|---|---|
|**ITT Cannon**<br>**MIl-C-26482**<br>**VG95328**|**ITT Cannon**<br>**MIl-C-26482**<br>**VG95328**|
|KPT00E<br>MS3110E|KPSE00E<br>MS3120E<br>VG95328A|
|KPT00F<br>MS3110F|KPSE00F<br>MS3120F<br>VG95328B|
|KPT0E-DN|KPSE0E-DN|
|KPT0E-DZ|KPSE0E-DZ<br>VG95328R|
|KPT01A|KPSE01A|
|KPT01E<br>MS3111E|KPSE01E<br>MS3121E|
|KPT01F<br>MS3111F|KPSE01F<br>MS3121F|
|KPT1E-DN|KPSE1E-DN|
|KPT1E-DZ|KPSE1E-DZ|
|KPT02E<br>MS3112E<br>VG95328H|KPSE02E<br>MS3122E<br>VG95328C|
|KPT06A|KPSE06A|
|KPT06E<br>MS3116E|KPSE06E<br>MS3126E|
|KPT06F<br>MS3116F|KPSE06F<br>MS3126F<br>VG95328K|
|KPT6E-DN|KPSE6E-DN<br>VG95328J|
|KPT6E-DZ|KPSE6E-DZ<br>VG95328M|
|KPT07A|KPSE07A|
|KPT07E<br>MS3114E|KPSE07E<br>MS3124E<br>VG95328D|
|KPT07F<br>MS3114F|KPSE07F<br>MS3124F<br>VG95328E|
|KPT7E-DN|KPSE7E-DN<br>VG95328S|
|KPT7E-DZ|KPSE7E-DZ<br>VG95328T|
|KPT08E|KPSE08E|
|KPT08F|KPSE08F|
|KPTB<br>MS3119<br>VG95328P||



## **CROSS REFERENCE lIST PROTECTIVE CAPS** KPT /  VG95328 / MIL-C-26482 

|**Part No.**|**Part No.**|**Part No.**|
|---|---|---|
|**ITT Cannon**|**MIl-C-26482**|**VG95328**|
|KPT80|MS3180||
|KPT80..C||Z2...VG95328|
|KPT81|MS3181||
|KPT81..C||Z1...VG95328|
|KPT81..N|MS 3181..N||



**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

31 

## tools **AND ACCESSORIES** KPT / KPSE / KPTC 

|tools**AND ACCESSORIES**KPT / KPSE / KPTC|KPT / KPSE / KPTC|KPT / KPSE / KPTC||||||
|---|---|---|---|---|---|---|---|
|tools|**KPSE / KPTC**|||||||
|Tool<br>Designation<br>Order reference<br>Locator*<br>Order reference<br>Testgage<br>Order reference<br>Hand crimptool M22520/1-01<br>995-0001-585<br>M22520/1-02<br>995-0001-736<br>M22520/3-1<br>995-0001-684<br>Crimpmachine<br>WA27F-CE<br>121586-5067<br>M22520/1-02<br>995-0001-736<br>M22520/3-1<br>995-0001-684<br>Crimp machine<br>HACS<br>HACS<br>–<br>–<br>–<br>–<br>* for contact sizes 20, 16, 12<br>**KPSE**<br>Contact size<br>Insertion tool<br>Order reference<br>Old designation<br>Extraction tool<br>Order reference<br>Extraction TIP<br>20*<br>–<br>038894-0018<br>CIT-20-16<br>MS2425R20<br>995-0001-965<br>317-7130-000<br>20**<br>M24256A20<br>995-0001-950<br>CIT-20-5A<br>MS2425R20<br>995-0001-965<br>317-7130-000<br>>~~ee~~||||||||
||16|M24256A16|995-0001-951|CIT-16-1|MS2425R16|995-0001-964|317-7129-000|
||12|M24256A12|995-0001-913|–|MS2425R12|995-0001-966|317-7131-000|
||* without insulation support ** with insulation support|* without insulation support ** with insulation support|* without insulation support ** with insulation support|||||
|**KPT14A4**<br>Contact type<br>Insertion tool<br>Order reference<br>Old designation<br>Extraction tool<br>Order reference<br>LN<br>Coaxial<br>–<br>–<br>–<br>CET-C6B<br>070064-0000<br>–<br>~~ee~~||||||||
|ContaCts KPT / KPSE / KPTC /|**KPTC**|||||||
|VG95328|Contact size|Insertion tool|Order ref.|Insertionpliers|Order ref.|Extraction tool|Extraction TIP|
||20|CITG-20A|12086-3104|CIT-KPTC-20|121086-3101|CET-KPTC-20|CET-KPTC-20-TIP|
||16|CIT-16|121086-3008|CIT-F80-16|121086-0097|CET-KPTC-16|CET-KPTC-16-TIP|
||**KPSE / VG95328**|||||||
||Contact size|Contact type||Contact order reference||||
|||||KPSE version|VG95328 version|||
||20|Socket with insulation support||031-8704-203|031-8704-203|||
|||Pin with insulation support||430-8560-006|430-8560-006|||
||16|Socket||031-8704-000|031-8704-000|||
|||Pin||430-8560-004|430-8560-004|||
||12|Socket||031-8704-012||||
|||Pin||430-8560-016||||
|||Grounding pin||430-8560-020||||
||**KPTC**|||||||
||Contact size|Order reference|Order reference(hardgoldplated)|**For shell size 8 and contact arrangements 12-14 only:**||||
||20<br>Socket|031-8704-508||Contact size|Contact size|Order reference||
||Pin|430-8560-404|||hardgoldplated||hard silverplated|
||16<br>Socket|031-8704-502||20 Socket<br>031-8704-509|||031-8704-506|
||Pin|430-8560-406||20 Pin|430-8560-411||430-8560-410|
||**KPT14A4**|||||||
||Coaxial|Pin<br>DM 53740-5001||||||
|||Socket<br>DM 53742-5001||||||



WIre Hole fIllers KPSE / KPTC 

## **KPSE/KPTC** 

|Contact size|Colour code|MS|Cannon|
|---|---|---|---|
|20|Red|MS3187A20|225-1012-000|
|16|Blue|MS3187-16A|225-1011-000|
|12*|Yellow|MS3187-12|225-0072-000|
|Coaxial 14A4*|Yellow|–|225-0018-000|



* KPSE only 

gaskets KPT / KPSE / KPTC 

## **KPT / KPSE / KPTC** 

|**KPT / KPSE / KPTC**||
|---|---|
|Shell size<br>Alu-Flex<br>Chloroprene<br>conductive<br>non conductive|Shell size<br>Alu-Flex<br>Chloroprene<br>conductive<br>non conductive|
|8<br>075-8543-000<br>075-8543-010|18<br>075-8543-005<br>075-8543-015|
|10<br>075-8543-001<br>075-8543-011|20<br>075-8543-006<br>075-8543-016|
|12<br>075-8543-002<br>075-8543-012|22<br>075-8543-007<br>075-8543-017|
|14<br>075-8543-003<br>075-8543-013|24<br>075-8543-008<br>075-8543-018|
|16<br>075-8543-004<br>075-8543-014||



Dimensions shown in mm | Specifications and dimensions subject to change ~~rs~~ 32 www.ittcannon.com 

kPse ContaCt and sealIng PrInCIPle 

- High performance 

- Crimp termination 

- Closed entry socket contacts 

Series KPSE environmental, miniature circular, quick disconnect connectors are designed for the extracting requirements of today’s electronic industry. 

They are intermateable, intermountable and interchangeable with all connectors manufactured according to MIL-C-26482, VG95328 and HE 301. 

Connectors of Cannon series KPSE have obtained the VDE Expertise No. 63761. 

## 1 **Standard MIl-C-26482 or Hardware** connector designed to MIL-C-26482 and VG95328 modelmates with any 

## **Contact retention** 

- 4 **Contact retention** RETAINING CLIP: completely encased in a tough plastic wafer to protect the clip from damage 

PLASTIC WAFER: latest version for easier and faster assembly and disassembly of contacts (used on selected layouts) 

- 2 **Crimp, snap-in contacts** and can be crimped with the standard M22520/1 crimp are designed to SAE-AS-39029 tool. 

CLOSED-ENTRY SOCKET CONTACTS eliminate damage from abuse by test probes and help to correct any misaligned pins during engagement. 

CONTACT INSERTION is accomplished from the rear of the connector. When the contact is fully inserted, the clip tines snap securely behind the contact shoulder. 

CONTACT EXTRACTION is accomplished with a front-inserted extraction tool. Pressing the tool plunger pushes the contact out through the rear of the connector. 

**Complete moisture sealing** is achieved by combining four seals: shell, peripheral, interfacial and wire seals. 

SHELL SEAL is effected when the plug shell pushes against the sealing ring in the receptacle when the connectors are mated. 

PERIPHERAL SEAL around the edge of the pin insulator is designed so that mating the connector puts tension on the seal and greatly reduces compression set. 

INTERFACIAL SEAL is achieved by the insulator faces meeting when the plug and receptacle are mated. 

WIRE SEAL is accomplished by a multiple ripple design, exceeding the wire sealing requirements of MIL-C-26482. 

3 **Monobloc insulator** and avoids interfacial empty space.does not leave any access to moisture 

- 5 **Positive insert-to-shell mechanical retention** plastic wafer firmly locked into a groove in the shell, in addi-with hard tion to a strong adhesive bond between the insert and shell. 

**==> picture [65 x 34] intentionally omitted <==**

Dimensions shown in mm | Specifications and dimensions subject to change 

www.ittcannon.com 

33 

## ProduCt safety InformatIon 

## **1.  MATERIAl CONTENT AND PHySICAl FORM** 

Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. 

a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. 

b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 

## **2.  FIRE CHARACTERISTICS AND ElECTRIC SHOCK HAZARD** 

There is no fire hazard when the connector is correctly wired and used within the specified parameters. 

Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance - in a circuit. Hot spots may occur when resis tance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 

## **3. HANDlING** 

Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. 

Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 

## **4. DISPOSAl** 

Incineration of certain materials may release noxious or even toxic fumes. 

## **5. APPlICATION** 

Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V DC are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. 

## **IMPORTANT GENERAl INFORMATION** 

**(i) Air and creepage paths/Operating voltage.** The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. 

## **(ii) Temperature** 

All information given are temperature limits. The operation temperature depends on the individual application. 

(iii) Other important information 

Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. 

ITT's Interconnect Solutions, is a division of ITT Corporation who manufactures the highest quality products available in the marketplace; however these products are 

intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. 

## **Product Warranty** 

A limited warranty applies to Cannon products. In general, except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. Please refer to _www.ittcannon.com_ (General Terms of Sale) for the complete text of Cannon’s applicable Terms and Conditions, including Warranty. 

This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. 

Reprinting this publication is generally permitted, indicating the source. However, Cannon’s prior consent must be obtained in all cases. “Engineered for life” is a registered trademark of ITT Corporation ©2012. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice. 

This document does not contain technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., App 2401 et. Seq.) 

www.ittcannon.com 

34 

## **Circular / Filter / Hermetic / Fiber Optic Connectors** ~~Lo~~ 

As a world leader in circular, filter, and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configurations for various harsh environments. Our wide variety of fiber optic products include hybrid contacts, multi-channel, rack and panel, and hi-rel assemblies, including MIL and ARINC standard solutions that meet numerous specifications, including NATO and MIL standards. 

## **D-Subminiature Connectors** ~~Lo~~ 

Cannon invented D-sub connectors in 1952. Our family of D-Subs now includes combinations of signal, power and RF, as well as severe service sealed connectors. Cannon D-Subs are available with an extensive line of backshells and accessories and are one of the most economical shielded connector solutions available. ITT D-Sub connectors are qualified to the MIL-DTL-24308 specification. 

**Microminiature Connectors** ~~Lo~~ Developed first by Cannon in the 1960’s, ITT's Interconnect Solutions microminiature connectors offer high performance and reliability with exceptional versatility. Available in rectangular, circular, and strip configurations for countless applications, many of our connectors meet or exceed applicable requirements of the MIL-DTL-83513 specification. 

**Rack and Panel Connectors** ~~Lo~~ Initially pioneered by Cannon during the 1930s, ITT's Interconnect Solutions is the world leader in rack and panel connectors, offering unmatched variety of shell configurations and insert arrangements, materials, plating, and contact options. Many of our standard and custom designs meet the stringent requirements of ARINC 600, ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards. 

## **Trident** ~~CT~~ 

Cannon’s Trident Connector System is a versatile range of electrical connectors based on a standard contact design. These contacts are fully interchangeable throughout the Trident Connector System. The connector options include low cost rectangular, rack and panel, industrial grade circulars, harsh environment circulars and shielded circulars. 

## **Transportation** ~~Lo~~ 

The ITT's Interconnect Solutions includes sealed circular and rectangular connectors in metal or plastic shells. These configurations include board to cable or cable to cable / bulkhead applications. Both signal and power contacts can be combined in various layouts. All product lines within the Transportation segment offer very low contact resistance providing maximum signal integrity. 

ITT's Interconnect Solutions is an international manufacturer and supplier of connectors including circular, rectangular, fiber optic, RF, power and high voltage, audio, PMCIA, Compact Flash Card, enclosures, cable assemblies, and application specific custom solutions. The Interconnect Solutions portfolio includes the brands Cannon, VEAM, and BIW Connector Systems. As a worldwide leader in connector technology for nearly a century, ITT offers one of the broadest product offerings, six sigma manufacturing capability, Value Based Product Development with exceptional engineering capability, and an extensive sales, distribution, and customer support network. 

www.ittcannon.com 

35 

**ITT Interconnect Solutions** Cannon, VEAM, BIW Connector Systems 

## **Visit our website at** 

www.ittcannon.com 

## **Global Design & Manufacturing** 

## **Customer Support** 

## **North America** 

MEXICO – Cannon, VEAM Av. Libre Comercio s/nentre Calzada Industrial Nuevo Nogales y Calzada del Raquet Club, Parque Industrial Nuevo Nogales phone: +52.631.3110050 fax: +52.631.3110060 

USA – Cannon 

666 East Dyer Road Santa Ana, CA 92705 toll free:  +1.800.854.3028 phone: +1.714.557.4700 fax: +1.714.628.2142 

USA – BIW Connector Systems 500 Tesconi Circle Santa Rosa, CA 95401 phone: +1.707.523.2300 fax: +1.707.523.3567 

USA - VEAM 100 New Wood Road Watertown, CT 06795 phone: +1.860.274.9681 fax: +1.860.274.4963 

## **Europe & Middle East** 

FRANCE – Cannon, VEAM 15, Boulevard Robert Thiboust Serris, France 77700 phone: +33.1.60.04.93.93 fax: +33.1.60.04.93.90 

GERMANY – Cannon, VEAM Cannonstrasse 1 71384 Weinstadt phone: +49.7151.699.0 fax: +49.7151.699.217 

## ITALY – VEAM 

Corso Europa 41/43 Lainate (MI), Italy 20020 phone: +39.02938721 fax: +39.0293872300 

LEBANON – BIW Connector Systems P.O. Box 199 Jounieh Lebanon phone: +961.9.911.560 fax: +961.9.912.126 

UK – Cannon, VEAM Jays Close, Viables Estate Basingstoke, RG22 4BA phone: +44.1256.311200 fax: +44.1256.323356 

## **Asia** 

CHINA – Cannon, VEAM Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Boan District, Shenzhen City, Guangdong Province, China 518125 phone: +86.755.2726.7238 fax: +86.755.2726.7515 

HONG KONG – Cannon, VEAM Units 2405-6, 24/F, ING Tower 308 Des Voeux Road Central Hong Kong phone: +852.2732.2720 fax: +852.2732.2919 

INDIA – Cannon, VEAM ITT Corporation India Pvt Ltd Money Chamber, Unit No. 202 #6, KH Road, Bangalore 560027 phone: +91 22 67843000 fax: +91 22 26783033 

JAPAN – Cannon, VEAM 5-11-3, Hibarigaoka, Zama-shi, Kanagawa, Japan 252-0003 phone: +81.462.57.2010 fax: +81.462.57.1680 

SINGAPORE – Cannon, VEAM 10 Jalan Kilang #06-01 Singapore 159410 phone:  +65.62763693 ext 232 fax: +65.62763685 

© 2013 ITT Corporation ”Engineered for life” and “Cannon” are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice.