10VV1

## **Corcom** 

## EMI/RFI Filter Product Overview 

TE Connectivity offers over 300 solutions for EMI/RFI problems associated with susceptibility, as well as compliance with international emissions standards. Corcom filters are available in a wide range of single and 3-phase designs as well as IEC inlet and power entry modules which can combine several functions to reduce cost, space and labor. Solutions are also available for DC applications and applications requiring extremely high performance with feedthrough filters and capacitors for a wide range of applications. 

Corcom Filter Products 

TE Connectivity 

**FILTER TYPE POWER LINE FILTERS** SERIES **B Series** ~~———~~ 

**DK Series** ~~=~~ 

**FILTER TYPE POWER LINE FILTERS** SERIES **B Series K Series DK Series** 

|PERFORMANCE||**General Purpose**||
|---|---|---|---|
|Approvals|UL / CSA / VDE|UL / CSA / VDE|UL / CSA / VDE|
|Features|General purpose RFI Filters for high<br>impedance load / low current|General purpose RFI power line<br>filters for high impedance loads|Enhanced differential mode<br>performance K Series RFI line filters|
||•General purpose|•Well suited to applications|•Higher performance line to line|
||•Wide variety of termination options<br>•Meets low leakage current<br>requirements of VDE portable<br>equipment and non-patient medical<br>equipment|where pulsed, continuous and/<br>or intermittent RFI interference is<br>present<br>•EK models meet the very low<br>leakage current requirements for<br>VDE portable equipment and non-<br>patient care medical equipment|attenuation than the K Series<br>•E version meets the very low<br>leakage current requirements for<br>VDE portable equipment and non-<br>patient care medical equipment<br>•V version features same high<br>performance with more|
|||•Available with ground line inductor|cost-effective design|
|||(choke)||
|ELECTRICAL PARAMETERS||||
|Max. voltage|250 VAC|250 VAC|250 VAC|
|Current Ratings|1, 2, 3, 5, 10, 20 or 30A|1, 2, 3, 5, 10, 20, 30, 40 or 60A|1, 3, 6, 10 or 20A|
|Leakage current each Line to Ground|VB Models:  .4 mA / .7 mA|VK Models:  .5 mA / 1.0 mA|VDK Models:  .4 mA / .7 mA|
|@ 120VAC 60Hz / 250VAC 50Hz|EB Models:  .21 mA / .36 mA|EK Models:  .21 mA / .36 mA|EDK Models:  .22 mA / .38 mA|
|Electrical Setup|Single stage|Single stage|Dual stage|
|MECHANICAL PARAMETERS||||
|Mounting features|Screw mounting|Screw mounting (flange or panel)|Screw mounting|
|Termination inputs|.25 [_6.3_] spade terminals,|.25 [_6.3_] spade terminals,|.25 [_6.3_] spade terminals,|
||8-32 terminal bolt & nut or|8-32 terminal bolt & nut,|8-32 terminal bolt & nut or|
||wire leads|wire leads or IEC 60320-1 C14 or C20|wire leads|
|Termination outputs|.25 [_6.3_] spade terminals,|.25 [_6.3_] spade terminals,|.25 [_6.3_] spade terminals,|
||8-32 terminal bolt & nut or|8-32 terminal bolt & nut or|8-32 terminal bolt & nut or|
||wire leads|wire leads|wire leads|
|TYPICAL APPLICATIONS||||
||Wide band RFI suppression|Universal filter for applications|Universal filter for applications|
||for applications requiring low|requiring mid-range attenuation|requiring improved attenuation|
||attenuation including:|including:|including:|
||•HVAC|•TV / Audio / Video|•TV / Audio / Video|
||•TV / Audio / Video|•Computing & accessories|•Computing & accessories|
||•Computing & accessories|•Home appliances|•Home appliances|
||•Home appliances|•Medical equipment|•Medical equipment|
||•Medical equipment|•Gaming machines|•Gaming machines|
||•Battery charging systems|•Exercise equipment|•Exercise equipment|
||•Exercise equipment|•Test measurement equipment||



corcom.com 

Corcom Filter Products 

TE Connectivity 

## **POWER LINE FILTERS** ~~ed~~ _(Continued)_ ~~eee~~ **R Series EBP, EDP, EOP Series WG Series X, Y & Z Series** 

## **General Purpose** 

## **Wide Range Performance** 

|**General Purpose**|**General Purpose**|**Wide Range Performance**|**Wide Range Performance**|
|---|---|---|---|
|UL / CSA / VDE|UL / CSA / VDE|UL / CSA / VDE|UL / CSA / VDE|
|Two-stage general purpose RFI<br>power line filter|PC board mountable general<br>purpose RFI filters|High performance, low cost filter<br>ideal for appliance equipment|Chassis or PC Board Mountable<br>Power Line Filters for Emission|
|•Dual T section RFI filter provides|•General purpose|•Cost effective|Control|
|premium performance<br>•Well suited for low impedance<br>loads where noisy RFI<br>environments are present|•Low leakage current<br>•Cost-effective<br>•Compact size|•Tubular design<br>•WGD, WGE and WGF versions<br>designed to comply with leakage<br>current requirements for appliances|•Compact chassis or PC board<br>mountable<br>•Three levels of performance<br>•Complete filtering solution in|
|•Controls pulsed, continuous and/or|•EDP model features enhanced|which may be easily moved from|minimal size|
|intermittent interference|differential mode performance|one place to another|•X Series for FCC Part 15J, Class B|
|•ER model offers low leakage<br>current without deterioration of|•EBP model features compact size<br>(less than 1” square)|•Available in a variety of styles|•Y Series for EN55022, Level A|
|insertion loss|||•Z Series for EN55022, Level B|
||||•Medical version available in the|
||||HZ Series|
|250 VAC|250 VAC|250 VAC|250 VAC|
|1, 2, 3, 5, 10 or 20A|1, 3, 6 or 10A|16A|1, 2, 3, 4 or 6A|
|VR Models:  .4 mA / .7 mA|EDP/EOP Models:  .22 mA / .38 mA|A, B & C Models:  .76 mA / 1.27 mA|.3 mA / .5 mA|
|ER Models:  .21 mA / .36 mA|EBP Models:  .13 mA / .21 mA|D, E & F Models:  .10 mA / .20 mA||
|Single stage|Single stage|Single stage|Single stage|
|Screw mounting (flange or panel)|PC board pins|Screw-in mounting stud|Screw mount or PC board pins|
|.25 [_6.3_] spade terminals,|PCB pins .025 [_.635_] square|.25 [_6.3_] spade terminals,|.25 [_6.3_] spade terminals or|
|8-32 terminal bolt & nut,||wire leads or|PCB pins .065[_1.65_] diagonal|
|wire leads or IEC 60320-1 C14||RAST 5 header interface||
|.25 [_6.3_] spade terminals,|PCB pins .025 [_.635_] square|.25 [_6.3_] spade terminals,|.25 [_6.3_] spade terminals or|
|8-32 terminal bolt & nut or||wire leads or|PCB pins .065[_1.65_] diagonal|
|wire leads||RAST 5 header interface||
|Universal filter for applications with<br>low impedance loads including:|Designed for PCB mounting for a<br>wide range of applications including:|Specially designed for the white<br>goods / appliance market. Offers|RFI filter designed to bring most<br>digital equipment (including those|
|•Motors|•Gaming machines|wide band RFI suppression for many<br>applications including:|with switching power supplies) into<br>compliance with EN55022, Level|
|•Semiconductor actuators<br>•Home appliances|•Cash terminals<br>•Office equipment|•Washing machines / dryers<br>•Dishwashers|A or B and FCC Part 15J, Class B<br>conducted emission limits. Ideal for<br>all applications with limited space|
|•Gaming machines|•Small consumer electronics|•Refrigerators & freezers|including:|
|•Exercise equipment|•TV / Audio / Video|•Coffee Machines|•Switching Power Supplies|
|•Security systems|•Computing & accessories|•Hand held appliances & tools|•Industrial single phase applications|
|•Industrial equipment & controls||•Ovens & ranges||



corcom.com 

Corcom Filter Products 

TE Connectivity 

|TE Connectivity|TE Connectivity|||Corcom Filter Products|
|---|---|---|---|---|
|SERIES<br>**FILTER TYPE**<br>~~—~~||**S, V & W Series**<br>**POWER LINE FILTERS**_(Continued)_|**G & N Series**|**SB Series**|
||PERFORMANCE||**Wide Range Performance**||
||Approvals|UL / CSA / VDE|UL / CSA / VDE|UL / CSA / VDE|
||Features|Multipurpose Power Line RFI Filter|High Performance RFI Filters for|High Performance B Series RFI Line|
|||for Emission Control|Switching Power Supplies For|Filters|
|||•Effective when used to control|increased filtering requirements|•Enhanced performance version|
|||emissions in equipment using SCR|•Designed to provide excellent|of our popular B Series of RFI line|
|||and T2L circuits|attenuation for most digital|filters|
|||•S & W Series designed for high<br>impedance frequencies|electronics equipment and help<br>comply with EN55022 Level A and<br>FCC Part 15J Class B|•Small size with enhanced<br>performance|
|||•V Series designed for low<br>impedance frequencies|•Broad frequency range of<br>performance from 20kHz to 30MHz|•30A version half the size of other<br>30A filters|
|||•Medical version available in the<br>MV Series|•Size and cost-effective solution|•Low leakage version available|
|ELECTRICAL PARAMETERS|||||
|Max. voltage||250 VAC|250 VAC|250 VAC|
|Current Ratings||3, 6, 10, 20 & 60A_(60A S Series only)_|6 & 10A|6, 10, 20 & 30A|
|Leakage current each Line to Ground||.4 mA / .7 mA_(S Series 3-10A)_|.3 mA / .5 mA_(EG models)_|.75 mA / 1.25 mA_(VSB models)_|
|@ 120VAC 60Hz / 250VAC 50Hz||.75 mA / 1.25 mA_(S Series 60A)_|1.2 mA / 2.0 mA_(VG & N models)_|.22 mA / .36 mA_(ESB models)_|
|||.5 mA / .82 mA_(V & W Series)_|||
|||.07 mA / .13 mA_(MV Series)_|||
|Electrical Setup||Dual stage|Single stage_(6A models)_<br>Dual stage_(10A models)_|Single stage|
|MECHANICAL PARAMETERS|||||
|Mounting features||Screw mounting|Screw mounting|Screw mounting|
|Termination inputs||.25 [_6.3_] spade terminals or|.25 [_6.3_] spade terminals|.25 [_6.3_] spade terminals or|
|||terminal bolt & nut||8-32 terminal bolt & nut|
|Termination outputs||.25 [_6.3_] spade terminals or|.25 [_6.3_] spade terminals|.25 [_6.3_] spade terminals or|
|||terminal bolt & nut||8-32 terminal bolt & nut|
||TYPICAL APPLICATIONS||||
|||Multipurpose power line RFI filter|Specifically designed for most digital|Wide band RFI suppression for|
|||for emission control and high|electronic equipment requiring a high|applications requiring enhanced|
|||noise industrial environments and|range of symmetric and asymmetric|performance including:|
|||applications that require compliance<br>with FCC Part 15, Subpart J and<br>EN55022, Level A, down to 150kHz|attenuation including:<br>•Switching power supplies|•TV / Audio / Video<br>•Computing & accessories|
|||including:|•Motor drives|•Home appliances|
|||•Consumer electronics|•Small machine tools|•Medical equipment|
|||•Small machine tools|•Industrial single-phase applications|•Gaming machines|
|||•Food service equipment|||
|||||•Exercise equipment|
|||•Measurement & Instrumentation|||



corcom.com 

Corcom Filter Products 

TE Connectivity 

## **POWER LINE FILTERS** _(Continued)_ 

**SK Series RK Series EMC Series IK Series** 

**==> picture [523 x 470] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|Wide Range Performance|
|UL / CSA / VDE|UL / CSA / VDE|UL / CSA / VDE|
|High Performance K Series RFI Line|High Performance Compact Power|Compact and Cost-effective Dual|Single and 2-phase RFI Filters for|
|Filters for SMPS Emission Control|Line Filter|Stage RFI Power Line Filters|Industrial Applications|
|• Designed to reduce conducted|• Compact|• Compact dual stage filter series|• Excellent performance for|
|noise to acceptable limits for|applications with high interference|
|equipment that must comply with|• Single stage|• Current rating up to 30A|levels|
|FCC / EN specifications|• Significant differential mode|• High differential mode attenuation|• Designed for single or two-phase|
|• Utilizes significantly higher element|performance|in the lower frequency range|applications|
|values than the general purpose K|• Suitable for industrial machinery|• High common mode performance|• Available touch safe terminals|
|Series|
|• Low input leakage current makes it|• Ideal for switching mode power|provide easy connections and|
|• ESK6C and VSK6C incorporate|suitable for portable equipment|supplies|prevent inadvertent contact|
|separate ground circuit inductor|
|250 VAC|250 VAC|250 VAC|500 VAC MAX. Line to Ground|
|3, 6, 10, 20, 30 & 40A|3, 6, 10, 15 & 20A|3, 6, 10, 15, 20 & 30A|1, 6, 16, 35, 50 & 80A|
|.4 mA / .7 mA|(3-10A VSK models)|.16 mA / .26 mA|.21 mA / .43 mA|(3-10A models)|.06 mA / 1.2 mA*|(1 & 6A models)|
|.21 mA / .36 mA|(3-10A ESK models)|.73 mA / 1.52 mA|(15-30A models)|1.7 mA / 3.2 mA*|(16 - 50A models)|
|.75 mA / 1.25 mA|(3-10A VSK models)|5.2 mA / 9.9 mA*|(80A model)|
|.3 mA / .5 mA|(3-10A ESK models)|* 1A @ 289 VAC, 16-80A @ 277 VAC 50Hz|
|Single stage|Single stage|Dual stage|Dual stage|(6-80A models)|
|Dual stage + ground choke|(1A only)|
|Screw mounting (flange or panel)|Screw mounting|Screw mounting|Screw mounting|
|.25 [|6.3|] spade terminals,|.25 [|6.3|] spade terminals|.25 [|6.3|] spade terminals,|.25 [|6.3|] spade terminals or|
|terminal bolt & nut,|8-32 terminal bolt & nut or|DIN type terminal block and bolt/nut|
|wire leads or IEC 60320-1 C14|wire leads|
|.25 [|6.3|] spade terminals,|.25 [|6.3|] spade terminals|.25 [|6.3|] spade terminals,|.25 [|6.3|] spade terminals,|
|terminal bolt & nut or|8-32 terminal bolt & nut or|wire leads or|
|wire leads|wire leads|DIN type terminal block and bolt/nut|
|Universal filter for consumer|Wide band RFI suppression|Wide band RFI suppression|Wide band RFI filter for small to|
|electronic applications requiring|for applications requiring high|for applications requiring high|medium sized industrial equipment,|
|a premium range of attenuation|attenuation level including:|attenuation levels including:|power converters and variable speed|
|including:|motors. Provides suppression of|
|• Consumer electronics|• Consumer electronics|
|industrial 2-phase applications with|
|• TV / Audio / Video|
|• Industrial machinery equipment|• Single phase industrial equipment|high RFI emissions including:|
|• Computing & accessories|• Small machine tools|• Inverters|• Transportation vehicles|
|• Home appliances|• Home appliances|• Switching power supplies|• Site applications|
|• Medical equipment|• Power supplies|• Small construction machinery|

**----- End of picture text -----**<br>


- Industrial equipment & controls 

- Exercise equipment 

corcom.com 

Corcom Filter Products 

TE Connectivity 

|**FILTER TYPE**<br>**POWER LINE FILTERS**_(Continued)_<br>~~a~~|**FILTER TYPE**<br>**POWER LINE FILTERS**_(Continued)_<br>~~a~~|**FILTER TYPE**<br>**POWER LINE FILTERS**_(Continued)_<br>~~a~~|**FILTER TYPE**<br>**POWER LINE FILTERS**_(Continued)_<br>~~a~~|
|---|---|---|---|
|SERIES<br>**Q Series**<br>**FC Series**<br>**EP & VP Series**<br>~~od~~||||
|PERFORMANCE||**Superior Performance**||
|Approvals|UL / CSA / VDE|UL / CSA / VDE *|UL / CSA / VDE|
|Features|Highest Performance RFI Filters for|Single Phase Power Line Filter for|Dual Stage RFI Power Line Filters|
||Switching Power Supplies|Frequency Converters|for Switching Mode Power Supplies|
||•High attenuation for common and<br>differential mode interference|•Designed for frequency inverters<br>and variable speed motor drives|•Dual stage filter offers high<br>insertion loss|
||•Effective from 10kHz to 30MHz|•Suitable for electronically noisy|•Well suited for meeting CISPR 22 A|
||•Optimized for attenuation and size|environments|and FCC Part 15J, Class B|
||•3 or 6A versions available<br>with IEC inlet<br>•Medical version available in the<br>HQ Series|•Protects programmable logic<br>controllers from RF noise on the AC<br>power line<br>•Touch safe terminals|•EP model meets very low leakage<br>current requirements<br>•7 and 12A versions offer optimum<br>package size|
|ELECTRICAL PARAMETERS||||
|Max. voltage|250 VAC|250 VAC|250 VAC|
|Current Ratings|3, 6 & 20A|6 & 10A|3, 6, 7, 10, 12 & 20A|
|Leakage current each Line to Ground|.73 mA / 1.27 mA_(3 & 20A VQ models)_|3.9 mA / 7.0 mA_(B suffix, single stage)_|.73 mA / 1.27 mA_(VP models)_|
|@ 120VAC 60Hz / 250VAC 50Hz|.22 mA / .38 mA_(3 & 20A EQ models)_|3.8 mA / 6.7 mA_(no suffix, dual stage)_|.21 mA / .36 mA_(EP models)_|
||.29 mA / .51 mA_(6A EQ models)_|||
|Electrical Setup|Dual stage<br>_(medical versions without y-capacitors)_|Single stage_(B suffix)_<br>Dual stage_(no suffix)_|Dual stage|
|MECHANICAL PARAMETERS||||
|Mounting features|Screw mounting (flange or panel)|Screw mounting|Screw mounting (flange or panel)|
|Termination inputs|.25 [_6.3_] spade terminals,|DIN type terminals|.25 [_6.3_] spade terminals,|
||wire leads or IEC 60320-1 C14||wire leads, terminal bolt & nut,  or IEC|
||||60320-1 C14|
|Termination outputs|.25 [_6.3_] spade terminals or|DIN type terminals|.25 [_6.3_] spade terminals,|
||wire leads||wire leads, or terminal bolt & nut|
|TYPICAL APPLICATIONS||||
||Trouble shooter for wide banded RFI|Wide band RFI suppression of|Wide band attenuation for|
||suppression of applications with very|industrial single phase applications|applications with very high RFI|
||high RFI emissions including:|with very high RFI emissions|emissions. This filter series offers|
||•Consumer electronics<br>•Single phase industrial applications<br>•Switching power supplies with<br>transient currents|including:<br>•Drives with long motor-cables<br>•Variable speed motor drive<br>applications|excellent attenuation for applications<br>such as:<br>•Consumer electronics<br>•Single phase industrial applications|
||•HVAC||•Drive motors and controllers|
|||_* VDE approvals for dual stage models_||
|||_up to 36A only_||



corcom.com 

Corcom Filter Products 

TE Connectivity 

**POWER LINE FILTERS** _(Continued)_ **DC FILTERS FEEDTHROUGH FILTERS** ~~ee~~ **T Series AQ Series DA, DB, DC and DCP Series FFA, FFD, AFC, AFD Series** 

|**Superior Performance**|**Superior Performance**|**General  & High Purpose**|**Superior Performance**|
|---|---|---|---|
|UL / CSA / VDE|UL / CSA|UL / CSA / VDE||
|High Performance RFI Power|High Frequency Power Line Filter|DC filters available in a wide variety|AC & DC rated feedthrough filters|
|Line Filters for Switching Power|or Power Entry Module|of versions for DC system RFI issues|and capacitors for highest rated|
|Supplies|•High common and differential|•DA Series - Compact RFI Line Filter|performance|
|•Superior common-mode and|mode performance from|with DC Inlet Connection|•FFA (AC rated) & FFD ( DC rated)|
|premium differential-mode<br>attenuation|10kHz to 1GHz<br>•Available with an IEC inlet,|•DB Series - High Current DC Inlet<br>Filter and Connectors|feedthrough filters<br>•AFC (AC rated)  & AFD (DC rated)|
|•Smaller package sizes than the EP<br>Series|fuseholder and switch<br>•Suitable for applications where|•DC Series - General purpose line<br>filters for DC applications up to|feedthrough capacitors<br>•Offers high reliability &|
|•ET models with low leakage current|ET models with low leakage current<br>computers are used to process|125VDC with many options|performance for high frequency|
|•Medical versions available in the|secret or confidential information|•P Series - adaptable power entry|applications|
|HT Series||module for DC rated applications|•Custom versions available|
|250 VAC|250 VAC|125 VDC_(DA, DB)_& 80VDC_(DC, P)_|250 VAC / 130 VDC|
|3, 6, 10, 15 & 20A|3, 6, 10, 15 & 20A|3, 6, 10 & 15A_(DA Series)_|10 to 300A_(FFA/AFC/DFC)_|
|||60A_(DB Series)_, 3 & 6A_(P Series)_|10 to 200A_(FFD)_|
|||15, 30, 60, 100 & 125A_(DA Series)_||
|.3 mA / .5 mA_(ET models)_|1.2 mA / 2.3 mA_(3A models)_|||
|.75 mA / 1.2 mA_(VT models)_|.7 mA / 1.2 mA_(6A models)_|||
|Single (3-10A) & Dual stage (10-20A)|Multi stage|||
|_(medical versions without y-capacitors)_||||
|Screw mounting|Screw mounting (flange or panel)|Screw mounting & snap-in|Screw mounting|
|.25 [_6.3_] spade terminals,|Wire leads|Spade terminals, PCB pins, wire|Screw terminal|
|wire leads, terminal bolt & nut,  or||leads, DA or DCB connector, or||
|IEC 60320-1 C14||terminal bolt & nut||
|.25 [_6.3_] spade terminals,|Wire leads, or IEC 60320-1 C14|Spade terminals, PCB pins, wire|Screw terminal|
|wire leads, or terminal bolt & nut||leads, DA or DCB connector, or||
|||terminal bolt & nut||
|Wide band attenuation for|Ideal filter series for hardened|•Network routing equipment|Universal applications including;|
|applications with very high RFI<br>emissions including:|applications where computers are<br>used to process secret or confidential|•Servers|•Servers and routers|
|•Consumer electronics|information.|•Switching equipment|•Base stations|
|•Single phase industrial applications||•Wireless cabinets|•Transportation|
|•Drive motors and controllers||•Ethernet hubs|•Telecom|
|•Commercial & building equipment||•Base stations|•MRI rooms|
|||•Repeater stations|•High current switch mode power|
|||•Power supplies for all types of|supplies|
|||communications equipment|•Military and aerospace|



corcom.com 

Corcom Filter Products 

TE Connectivity 

~~CO~~ SERIES **FILTER TYPE** ................._.._._.... **3-PHASE FILTERSAYO Series AYA Series A Series** ~~aeRe~~ 

|PERFORMANCE|**General  & High Purpose**|**Wide Range Performance**|**Wide Range Performance**|
|---|---|---|---|
|Approvals|UL / CSA / VDE|UL Recognized²|UL / CSA / VDE|
|Features|Compact Low Current 3-phase|3-phase WYE RFI Power Line|High Performance 3-phase RFI|
||WYE RFI Filters|Filters|Filters for WYE Applications|
||•For 3-phase, four wire, WYE|•For 3-phase, four wire, WYE|•Common mode and differential|
||applications|applications|mode suppression from 50kHz to|
||•Filters each of the three lines plus<br>neutral|•Cost-effective, universal 3-phase<br>filters|30MHz<br>•Optional end bell kits available to|
||•Good for attenuation beginning at|•Good attenuation over the|shield input and output terminals|
||100kHz|complete frequency range|•AYP single stage for lower noise|
||•Space saving design|of 10kHz to 30MHz|environments|
||•Low leakage current|•Two different mounting styles<br>available|•AYT dual stage provides highest<br>performance|
|ELECTRICAL PARAMETERS||||
|Max. voltage|440 VAC Phase to Phase|440 VAC Phase to Phase|440 VAC Phase to Phase|
||250 VAC Phase to Neutral / Ground|250 VAC Phase to Neutral / Ground|250 VAC Phase to Neutral / Ground|
|Current Ratings|3, 6, 10 & 20A|16, 25, 36, 50, 63 & 100A|20, 30, 45 & 60A|
|Leakage current each Line to Ground|2.0 mA / 3.0 mA_(3 - 10A models)_|1.62 mA / 2.82 mA|1.4 mA / 3.4 mA|
||3.5 mA / 5.5 mA_(20A models)_|_@ 120 VAC 60Hz / 250 VAC 50Hz_|_@ 120 VAC 60Hz / 250 VAC 50Hz_|
||_@ 120 VAC 60Hz / 250 VAC 50Hz_|||
|Electrical Setup|Single stage|Single stage|Single stage_(AYP Models)_&<br>Dual stage_(AYT Models)_|
|MECHANICAL PARAMETERS||||
|Mounting features|Screw mounting (flange or panel)|Screw mounting (flange or inserts)|Screw mounting  (inserts)|
|Termination inputs|.25 [_6.3_] spade terminals|Terminal bolt & nut or|Terminal bolt & nut|
|||DIN type terminals||
|Termination outputs|.25 [_6.3_] spade terminals|Terminal bolt & nut or|Terminal bolt & nut|
|||DIN type terminals||
|TYPICAL APPLICATIONS||||
||Wide band RFI suppression for<br>general purpose 3-phase applications|Universal filter series equipped with<br>2 different connecting versions|Wide band RFI suppression for<br>industrial 3-phase applications with|
||with low to middle RFI emissions|including:|high noise emissions (AYP models)|
||including:<br>•Vending machines<br>•Food service equipment<br>•Gaming machines|•Uninterruptible power supplies<br>•Industrial control systems<br>•Machine tools|and lower noise emissions (ATY<br>models) including:<br>•Large machine tools<br>•Customer machinery|
||•Small machine tools||•Input filter for motor drives|
|||_² All models except 16AYA10, 30AYA10,_||
|||_63AYA6, 63AYA6A and 100AYA6A_||



corcom.com 

Corcom Filter Products 

TE Connectivity 

> **3-PHASE FILTERS** ~~|~~ _(Continued)_ 

~~ee~~ **FCD Series BCF Series AYC Series ADT Series** 

||**Superior Performance**|**Superior Performance**||
|---|---|---|---|
|UL Recognized|UL & VDE|UL Recognized³|UL Recognized|
|3-phase Delta External Power Line|Compact 3-phase Delta RFI Filters|3-phase WYE RFI Power Line|High Performance High Current|
|Filter for Frequency Converters|for Universal Applications|Filters for High Noise Applications|3-phase Delta RFI Filters|
|•Very high attenuation & high|•Compact, light weight book-form|•For 3-phase, four wire, WYE|•Designed for very high insertion|
|insertion loss|design|applications|loss for Delta three phase, three|
|•BS models optimized for very high|•Insulated, high quality safety|•Very high attenuation with low|wire applications|
|insertion loss|terminals for input and output|leakage current|•Available with common or|
|•BS models suitable for infeed/<br>regenerative (ER) applications|•Good common and differential<br>mode performance below 100kHz|•Ideal for EMC troubleshooting and<br>refurbishing in the field|differential mode coils|
|•Touch safe terminals provide|•Touch safe terminals provide|•Touch safe terminals provide||
|easy connections and prevent|easy connections and prevent|easy connections and prevent||
|inadvertent contact for safety|inadvertent contact for safety|inadvertent contact for safety||
|480 VAC Phase to Phase|480 VAC Phase to Phase|480 VAC Phase to Phase|480 VAC Phase to Phase|
|277 VAC Phase to Neutral / Ground|277 VAC Phase to Neutral / Ground|277 VAC Phase to Neutral / Ground|277 VAC Phase to Neutral / Ground|
|6 to 230A|7 to 130A|16 to 200A|63, 100, 160 & 200A|
|Varies from .26 mA/V for 6A model|30 mA|Varies from 62 / 106 mA/V for 16A|1.3A_(ADT6)_|
|to 3.25 mA/V for FCD10BS models|_@ 277 VAC 50Hz_|to 111 / 192 mA/V for 200A model|2.6A_(63ADT6S)_|
|_refer to catalog or website for full ratings_||_refer to catalog or website for full ratings_|4.6A_(100, 160, 200ADT6S)_|
|_voltage drop to virtual N to PE/V_||_@ 120 VAC 60Hz / 277 VAC 50Hz_|_@ 277VAC 60Hz_|
|Single stage_(B suffix models)_&<br>Dual stage_(blank suffix models)_|Single stage|Single stage|Single stage<br>with feedthrough capacitors|
|Screw mounting (flange)|Screw mounting (flange)|Screw mounting (flange)|Screw mounting (flange)|
|DIN type terminals|DIN type terminals|DIN type terminals|Terminal bolt & nut|
|DIN type terminals|DIN type terminals|DIN type terminals|Terminal bolt & nut|
|Wide band RFI suppression for|Specially suited for regeneration|Wide band RFI suppression for WYE|Ideal for industrial 3-phase|
|industrial 3-phase applications with|systems of returning power. Wide|applications with very high|applications with extremely high|
|very high RFI emissions including:|banded RFI suppression for industrial|RFI emissions including:<br>banded RFI suppression for industrial|noise emissions including;|
|•Machine tools<br>•Elevators & escalators<br>•Frequency converters<br>•Industrial cabinets|3-phase applications with very high<br>RFI emissions including:<br>•3-phase inverters & converters<br>•Variable speed motor drives<br>•Process automation equipment|•Frequency converters with very<br>long motor cables<br>•Machine tools|•High current motor drives<br>•Spot-welding machines<br>•Any difficult application with very<br>difficult noise suppression|
||•Elevators & escalators|||
||•Machine tools|_² All models except 200AYC10B_||



corcom.com 

Corcom Filter Products 

TE Connectivity 

**FILTER TYPE POWER ENTRY MODULES** SERIES **SRB Series EEJ Series C Series** ~~SS~~ 

|PERFORMANCE|**General Purpose**|**Wide Range Performance**|**Wide Range Performance**||
|---|---|---|---|---|
|Approvals|UL / CSA / VDE*|UL / CSA / VDE|UL / CSA / VDE*||
|Features|Minimum Depth, Cost-effective|Cost-effective Medium|Power Entry Module with Switch||
||Shielded Power Inlet Filter<br>•Wide range of capacitor values<br>•Attenuates coupled EMI up to<br>300MHz|Performance Power Inlet Filter<br>Including the EJH/EJHS, EJM/EJMS<br>and EJS Models<br>•Enhanced two element circuit<br>provides medium attenuation to|•Two function power entry module<br>combining a DPST switch and an<br>IEC 60320-1 inlet<br>•Snap–in or flange mounting||
||•Minimal to low leakage current|30MHz|•Available with or without a shielded|Available with or without a shielded|
||versions are suitable for patient<br>and non-patient contact medical<br>equipment.|•EJH & EJHS models feature minimal<br>leakage current suitable for patient<br>contact medical applications|general purpose or medical grade<br>filter<br>•Two element circuit provides||
||•Full range of mounting and<br>termination options including<br>unique vertical and horizontal<br>orientation slide in mounts<br>eliminate the need for mounting|•EJM & EJMS models feature low<br>leakage current, suitable for most<br>medical applications<br>•EJS models feature EEJ|enhanced EMI attenuation<br>•Reduce OEM wiring time with<br>optional pre–connected line and<br>switch terminals||
||hardware|performance in snap-in mounting|||
|ELECTRICAL PARAMETERS|||||
|Max. voltage|250 VAC|250 VAC|250 VAC||
|Current Ratings|15A*|1 to 20A|1, 3, 6, 10 or 15A*||
|Leakage current each Line to Ground<br>@ 120VAC 60Hz / 250VAC 50Hz|Varies by model from .2µA to .24mA<br>_refer to catalog or website for full ratings_|EEJ/EJS Models:  .22 mA / .38 mA<br>EJH Models:  2µA / 5µA<br>EJM Models:  .01 mA / .017 mA|F models:  .25 mA / .40 mA<br>H & non-filtered models:  2µA / 5µA||
|Electrical Setup|Capacitive, 8 options available<br>values from 33pF to 3300pF|Single stage|Single stage & unfiltered||
|MECHANICAL PARAMETERS|||||
|Mounting features|Screw and snap-in mounting|Screw and snap-in mounting|Screw and snap-in mounting||
|Termination inputs|IEC 60320-1 C14|IEC 60320-1 C14 or C20|IEC 60320-1 C14||
|Termination outputs|.25 [_6.3_] spade terminals,|.25 [_6.3_] spade terminals,|.187 [_4.8_] spade terminals_(non-filtered)_|_(non-filtered)_|
||wire leads or PC board pins|wire leads or PC board pins|or .25 [_6.3_] spade terminals_(Filtered)_||
||||Available with or without||
||||pre-connected switch terminals||
|TYPICAL APPLICATIONS|||||
||Wide band RFI suppression for any|Wide band RFI suppression for a|Wide band RFI suppression for||
||application with very limited space|wide range of applications including:|applications with limited space||
||for the suppression unit including:|•TV / Audio / Video|including:||
||•TV / Audio / Video|•Computing & accessories|•TV / Audio / Video||
||•Computing & accessories|•Home appliances|•Computing & PC powers supplies||
||•Home appliances|•Medical equipment|•Network &  cabeling systems||
||•Consumer electronics|•Gaming machines|•Medical equipment||
||_*15A versions are tested by UL to US and_|•Exercise equipment|_*15A versions are tested by UL to US and_||
||_Canadian requirements and_<br>_are VDE approved at 10A_|•Appliances|_Canadian requirements and_<br>_are VDE approved at 10A_||



corcom.com 

Corcom Filter Products 

TE Connectivity 

**POWER ENTRY MODULES** _(Continued)_ **CU Series** ~~a~~ **GG & HG Series P Series EJT Series** 

## **Superior Performance** 

||**General Purpose**||**Superior Performance**|
|---|---|---|---|
|UL / CSA / VDE*|UL / CSA / VDE|UL / CSA / VDE|UL / CSA / VDE*|
|Compact 1U Height Switched Power|Smallest Power Entry Module with|Versatile Power Entry Module with|High Performance Power Inlet Filter|
|Entry Module<br>•Designed for popular 1U (1 ¾”)|Metric Fuse Holders<br>•Single or dual fusing|Small Footprint<br>•Snap-in or flange mounting|•Superior EMI filter with IEC 60320-1<br>inlet|
|height rack mounted equipment|•Two element circuit provides basic|•Standard IEC 60321-1 C14 power|•Double three element differential|
|•Two function power entry module|attenuation|inlet|mode circuit attenuates noise up|
|combining a SPST switch and an<br>IEC 60320-1 inlet|•Available with an internal ground-<br>circuit inductor (C versions)|•Both North American and metric<br>fusing capabilities|to 1GHz<br>•Up to 15A with IEC 60320-1 C14|
|•Snap–in, flange and flush mounting<br>•Reduce OEM wiring time with<br>optional pre–connected line and|to isolate equipment chassis<br>from power line ground at radio<br>frequencies|•Two voltage selection options<br>•Optional DPST on/off switch|•20A rating with IEC 60320-1 C20<br>•Spade terminals or wire leads|
|switch terminals|•Multiple termination and mounting|•Filter options for general purpose,||
||styles|medical and high-performance EMI||
||•Medical version as the HG Series|filtering||
||identical to GG with dual fuse only|||
|250 VAC|250 VAC|250 VAC|250 VAC|
|1, 3, 6, 10 or 15A*|1, 3, 6 & 10A|3, 6 & 10A Filtered, 10A non-filtered|1, 3, 6, 10 or 15A|
|Filtered models:  .25 mA / .40 mA<br>Non-filtered models:  2µA / 5µA|HG Models:  2µA / 5µA<br>GG Models:  .25 mA / .42 mA|H & L Models:  2µA / 5µA<br>S & Z Models:  .25 mA / .50 mA|.21 mA / .36 mA|
|Single stage & unfiltered|Single stage|Single stage|Dual stage|
||_(medical versions without y-capacitors)_|||
|Screw and snap-in mounting|Screw and snap-in mounting|Screw and snap-in mounting|Screw and snap-in mounting|
|IEC 60320-1 C14|IEC 60320-1 C14|IEC 60320-1 C14|IEC 60320-1 C14 or C20|
|.187 [_4.8_] spade terminals|.25 [_6.3_] spade terminals or|.187 [_4.8_] spade terminals_(standard)_|.25 [_6.3_] spade terminals or|
||wire leads|or .25 [_6.3_] spade terminals_(L & Z)_|wire leads|
|Available with or without||||
|pre-connected switch terminals||Available with or without||
|||interconnection block for unfiltered||
|||versions||
|Specially designed for 1U height|Wide band RFI suppression for|Wide band RFI suppression in over|Specially designer to attenuate noise|
|equipment racks and can be used in|applications with very limited space|8000 configurations for a wide range|in the high frequency range up to|
|space limited applications  including:|including:|of applications including:|1GHz for various electronic|
|•Telecom|•TV / Audio / Video|•TV / Audio / Video|applications including:|
|•Computing|•Computing & accessories|•Computing & accessories|•Plasma & LCD TV’s|
|•TV / Audio / Video|•Home appliances|•Home appliances|•Computing & accessories|
|•Consumer electronics|•Medical equipment|•Medical equipment|•Instrumentation & measurement|
|_*15A versions are tested by UL to US and_<br>_Canadian requirements and_<br>_are VDE approved at 10A_|•Gaming equipment<br>•Fitness equipment|•Gaming equipment<br>•Fitness equipment|_*15A versions are tested by UL to US and_<br>_Canadian requirements and_<br>_are VDE approved at 10A_|
|||•HVAC||



corcom.com 

## **FOR MORE INFORMATION** 

corcom.com 

## **TE Technical Support Center** 

Internet: te.com/help USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 

Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree 

## **te.com** 

© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All Rights Reserved. 

- 1-1654250-1  CIS  JG  08/2011 

Corcom, TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. 

While TE has made every reasonable effort to ensure the accuracy of the information in this flyer, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this flyer are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.