1060..

**==> picture [36 x 29] intentionally omitted <==**

**----- Start of picture text -----**<br>
F I<br>UA<br>I E<br>ISO 9002<br>Q L<br>T D<br>I<br>R<br>TY<br>E<br>C<br>**----- End of picture text -----**<br>


## _**COIN CELL PC BATTERY HOLDERS**_ 

**==> picture [112 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
20mm to 30mm Sizes<br>**----- End of picture text -----**<br>


**==> picture [163 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
12mm to 16mm & 1/3 “N” Sizes<br>**----- End of picture text -----**<br>


**==> picture [222 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
SINGLE CELL HOLDER DUAL CELL HOLDER<br>(3-VOLT) (6-VOLT)<br>**----- End of picture text -----**<br>


Single and Dual “Printed Circuit” Cell Holders for Lithium Coin Cells. Designed for easy battery replacement.  Will accommodate diameters from 12mm to 30mm and heights from 1.6mm to 7.7mm.  Some holders will accept more than two cells if they fall within the heights specified. 

## **IDEALLY SUITED FOR…** 

- Duracell, Eveready, Panasonic, Ray-O-Vac, Sanyo, Varta, Toshiba, Seiko and other major battery manufacturers 

- Computer memory, power transfer and back-up systems 

- Video and telecommunications power back-up 

- Preprogrammed video and electronic games 

- Microprocessors and Microcomputer memory hold 

- Notebook and laptop applications 

- Emergency power systems 

**==> picture [210 x 48] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting Detail<br>al (2)<br>DWG. 1 + [—w—]<br>**----- End of picture text -----**<br>


- Industrial and commercial security and alarm systems 

- Communications power sources 

- Miniaturized battery power devices 

## **DESIGN ADVANTAGES…** 

- Low profile for high density packaging 

- Reliable spring tension assures low contact resistance 

- Retains battery securely to withstand shock and vibration 

- Unique notched slots assure quick and easy battery insertion and replacement 

|• Unique notched slots assure quick and easy battery insertion and replacementUnique notched slots assure quick and easy battery insertion and replacement<br>•Base material UL Rated 94V-0.  Impervious to most industrial solvents<br>•Operating temperature range: -60°F to +293°F (-50°C to +145°C)<br>Mounting Detail<br>OE<br>+ Bos DIA.LEG<br>TT L J<br>{<br>.156I<br>5 GRCLE DIA.<br>M<br>i<br>.035|||
|---|---|---|
|•Advanced air-flow design pattern enhances air circulation around battery<br>•Nickel-over-copper plated spring steel contacts feature clearly marked<br>polarities to help guard against improper insertion<br>**DWG. 2**<br>NICKEL OVER COPPER PLATE<br>——o<br>eM|||
||||
|**DIMENSIONS**<br>**BATTERY CROSS REFERENCE**|||
|**499**<br>2<br>1<br>.495<br>.695<br>.250<br>.580<br>.350<br>.750<br>.593<br>.393<br>**“1/3N”**<br>_DL 1/3N, K58L, CR 1/3N_<br>**500**<br>2<br>1<br>.495<br>.435<br>.150<br>.280<br>.250<br>.750<br>.593<br>.393<br>**12mm**<br>_BR1216, CR1216, BR1220, CL1220, CR1220, BR1225_<br>**501**<br>2<br>2<br>.495<br>.505<br>.250<br>.380<br>.350<br>.750<br>.593<br>.393<br>**502**<br>2<br>1<br>.635<br>.505<br>.150<br>.312<br>.250<br>.897<br>.750<br>.463<br>**16mm**<br>_BR1616, CR1612, CR1616, CR1620, CR1632_<br>**103**<br>1<br>1<br>.796<br>.513<br>.195<br>.335<br>.295<br>1.130<br>.896<br>.807<br>_BR2016, CR2016, DL2016, BR2020, CL2020, BR2025,_<br>**106**<br>1<br>1<br>.796<br>.513<br>.195<br>.335<br>.295<br>1.219<br>1.093<br>.807<br>**20mm**<br>_CR2025, DL2025, BR2032,CR2032, DL2032_<br>**1026**<br>1<br>2<br>.796<br>.630<br>.312<br>.452<br>.412<br>1.219<br>1.093<br>.807<br>**104**<br>1<br>1<br>.911<br>.513<br>.195<br>.335<br>.295<br>1.150<br>1.000<br>.807<br>**107**<br>1<br>1<br>.911<br>.513<br>.195<br>.335<br>.295<br>1.219<br>1.093<br>.807<br>**23mm**<br>_BR2320, CL2320, CR2320, BR2325, CR2325, DL2325,_<br>**1027**<br>1<br>2<br>.911<br>.630<br>.312<br>.452<br>.412<br>1.219<br>1.093<br>.807<br>_BR2330, CL2330, BR2335, CR2354**_<br>**105**<br>1<br>1<br>.985<br>.513<br>.195<br>.335<br>.295<br>1.219<br>1.093<br>.807<br>**1025**<br>1<br>2<br>.985<br>.630<br>.312<br>.452<br>.412<br>1.219<br>1.093<br>.807<br>**24mm**<br>_CR2430, DL2430, CR2450*, DL2450*, CR2477_†<br>**1025-7**<br>1<br>1<br>.985<br>.681<br>.312<br>.503<br>.412<br>1.219<br>1.093<br>.807<br>**301**<br>1<br>1<br>1.187<br>.513<br>.195<br>.335<br>.295<br>1.425<br>1.297<br>.807<br>**30mm**<br>_BR3032_<br>**DWG.**<br>**N0. OF**<br>**_DURACELL, EVEREADY, PANASONIC, RAY-O-VAC_**<br>**CAT. NO.**<br>**NO.**<br>**CELLS**<br>**A**<br>**B**<br>**C**<br>**D**<br>**E**<br>**L**<br>**O.D.**<br>**M**<br>**CELL**<br>**_SANYO, SONY, SEIKO, TOSHIBA,  VARTA_**<br>* For Cat. No.1025 (1) cell only.   ** For Cat. No. 1027 (1) cell only.  † For Cat. No. 1025-7 only.<br>}<br>}<br>}<br>}<br>}<br>}<br>}<br>~~a a a ee eeeee~~<br>~~I~~<br>rr<br>ee ee ee ee ee ee eeeeee<br>a<br>ee ee ee eeeee<br>a aee<br>ee<br>a a ee ee<br>poee<br>a<br>ee ee ee ee<br>re ee<br>ee ee ee<br>ee ee eee<br>aee<br>ee ee eee<br>a **a** a a<br>ee **e**e<br>a e<br>~~eee~~<br>~~Po~~|||



_31_ ~~eee~~ _-07 20th Road • Astoria, New York 11105-2017  • (718) 956-8900 • FAX (718) 956-9040_ KEYSTONE ~~—~~ _• e-mail: kec@keyelco.com WebSite: keyelco.com_ 

**6** 

## _**COIN CELL BATTERY HOLDERS**_ 

**==> picture [39 x 26] intentionally omitted <==**

**----- Start of picture text -----**<br>
o.com<br>lc<br>eye<br>k<br>**----- End of picture text -----**<br>


**==> picture [268 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
VERTICAL 20mm COIN CELL HOLDERS<br>**----- End of picture text -----**<br>


**==> picture [521 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
COMPACT SLIMLINE<br>This space saving vertical design features a rugged, lightweight body that mounts squarely A “unique” space saving design. The battery is installed vertically from the top. The contacts<br>and securely on PC boards for easy installation and replacement of batteries. Reliable spring of this holder are polarized to assure proper continuity and circuit protection.<br>tension assures low contact resistance. • Polarized holder<br>• Accepts all major manufacturers’ 20mm  • Mounts securely for wave soldering<br>diameter batteries • Reliable spring tension assures low<br>• Molded notch prevents improper insertion of  contact resistance<br>2032 size cells • Retains 20mm batteries securely to withstand<br>• Space saving design for high density packaging shock and vibration<br>• Retains cells securely, withstands shock • Temp range -60°F to +293°F (50°C to +145°C)<br>and vibration<br>•• Polarity clearly markedMounts securely for  338 hl: , bee ane Us<br>• wave solderingTemp range  seGE _p T -300 vont<br>-60°F to +293°F<br>ase FOS] cone 920 —+ pop ass rou /<br>(50°C to +145°C) - / g 795<br>Q y | yO”. 1.000<br>: J x YE YB .150 | YB ub<br>. 193 “045<br>-670 Mounting Detail MATERIAL .600 515-4315 Mounting Detail<br>MATERIAL Contacts:  .016 Spring Steel,  .060<br>Contacts : .012 Spring Steel, Tin over Nickel Plate wos on DW HOLE a Tin over Nickel Plate 1185 oso HOLE<br>Base:  PBT, UL Rated 94V-0 Base:  PBT, UL Rated 94V-0<br>CAT. NO. 1067 150f Teo . t CAT. NO. 1065 136 DIA.(2)coe! L:PLS .600315<br>**----- End of picture text -----**<br>


## **COMPACT 20mm COIN CELL HOLDER** 

The “Ultimate” in space saving design. This 20mm coin cell holder allows “pop-in” entry of batteries using the minimum amount of space. Finger pressure lever allows batteries to disengage from holder. 

**==> picture [213 x 38] intentionally omitted <==**

**----- Start of picture text -----**<br>
• Suitable for 2025 and 2032 cells • Retains batteries securely to<br>• “Pop-in” design using minimum space withstand shock and vibration<br>• Finger pressure lever disengages battery • Temp range -60°F to +293°F<br>• Reliable spring tension assures low  (50°C to +145°C)<br>contact resistance<br>**----- End of picture text -----**<br>


**MATERIAL Contacts:** .012 Phosphor Bronze, Tin Plate **Base:** Glass Filled Nylon, UL Rated 94V-0 

**==> picture [45 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting Detail<br>**----- End of picture text -----**<br>


**CAT. NO. 1066** 

## **SURFACE MOUNT COIN CELL HOLDERS** 

**SMT Design - Holders for 20mm and 23mm Lithium Coin Cell Batteries** 

- Temp. range -60ºF to +540ºF (-50ºC to +282ºC) 

- Ideal for memory back-up applications 

- Polarity clearly marked (+) 

- UL approved material, 94V-0 

- Rugged construction, light weight 

- Low profile for high density packaging 

- SMT solder tail with “Flow-Hole” design for increased joint strength 

- Viewable solder tails assures reliable joint inspection 

- Safe for all soldering & reflow operations 

**==> picture [522 x 143] intentionally omitted <==**

**----- Start of picture text -----**<br>
• Compatible with vacuum and mechanical  • All conductive polystyrene carrier tape meets ANSI/EIA<br>Available on Tape and Reel pick & place assembly systems - 481 standard<br>SMALL PAD PATTERN Pad Layout<br>a CAT. NO.1061 ON TAPE1061TR ee CELLS 1 .256  A .290 1.015  B ee C .156 ee D .896  E CELL 2016*, 2020, BATTERY 47 E<br>a 20mm Pp a MN,<br>1062 1062TR 2 .375  .406 1.015  .156 .896 2025, 2032<br>ee ut (tes BT<br>*Cat. No. 1061 (1 or 2 cells); Cat. No. 1062 (3 cells) 1071 1071TR 1 .256 .290 1.015 .156 1.000 23mm 2320, 2325, 2330 .600 | P MN.<br>a LARGE PAD PATTERN WD 9316 vin.<br>a CAT. NO. ON TAPE es CELLS es A es B C D E CELL BATTERY asl bo Tp<br>1063 1063TR 1 .256  .290 1.250  .278 .896 2016*, 2020,<br>20mm<br>a 1064 1064TR a ee 2 .375  .406  1.250  eee .278 .896 2025, 2032<br>a 1073 1073TR ee 1 ee .256 .290 1.250 eeee .278 ee 1.00 ee ee 23mm 2320, 2325, 2330 MATERIAL:  Contacts:  .015 Steel, Tin Plate   Base: Nylon, Stanyl-46<br>*Cat. No. 1063 (1 or 2 cells); Cat. No. 1064 (3 cells) Tape & Reel Spec’s:  44mm wide; 32mm pitch; 13 inch reel (200 pieces per reel)<br>**----- End of picture text -----**<br>


_31-07 20th Road • Astoria, New York 11105-2017  • (718) 956-8900 • FAX (718) 956-9040_ 

**7** 

_e-mail: kec@keyelco.com • WebSite: keyelco.com_ 

**==> picture [532 x 38] intentionally omitted <==**

**----- Start of picture text -----**<br>
COIN CELL RETAINERS & HOLDERS<br>eS fo<br>F I<br>UA<br>I E<br>ISO 9002<br>Q L<br>T D<br>I<br>R<br>TY<br>E<br>C<br>**----- End of picture text -----**<br>


## **SURFACE & THRU HOLE MOUNT COIN CELL RETAINER CONTACTS** 

## **COMPACT CONTACTS** 

Economical and reliable retainer contacts are designed for quick and easy battery installation and replacement. Perfect for memory back-up applications. Surface and thru hole mount retainer contacts are available for 6.8mm to 24mm lithium coin cell batteries. 

- Low profile for densely packed PCBs 

**ULTRA-LOW** • Retains cell securely, withstands shock & vibrations **PROFILE!** •• Reliable dual spring contacts assure low contact resistancePolarity clearly marked (+) • Stable thru mount legs for increased strength • Balanced & lightweight for reliable pick-up & placement —_ —_ • Compatible with vacuum and mechanical pick & place “ie assembly systems • “Flow-Hole” SMT solder tail design for increased joint strength a a • Viewable solder tails assures reliable joint inspection = ae • All conductive polystyrene carrier tape meets ANSI/EIA Ld _**Available on Tape and Reel**_ - 481 standard **For 6.8mm Dia. Button Cell** He' 1 Us Pad Layout a Mounting Detail weg Saal) J’ N Polarity eee.) IN(CO Marking | ae Also Available: Optional negative re Marking p toh re p bottom contact. ( **Cat. No. 2990,** see page 9) |. _____ —__Le] 7 res r--| ; **DWG. 1** - SURFACE MOUNT (SMT) **MATERIAL:** .010 Phosphor Bronze, Nickel Plate **DWG. 2** - THRU HOLE MOUNT (THM) **MATERIAL:** .010 Phospher Bronze, Nickel Plate **CAT. ON TAPE DWG. MTG. H CELL NO. & REEL NO. TYPE A B C D E F G DIA. DIA. BATTERY REFERENCE TAPE & REEL SPEC’S** ~~P|~~ **2998 2998TR** ~~|~~ 1 ~~|~~ SMT ~~|~~ .315 | .197 ~~tt~~ .421 .114 ~~tt~~ — .070  .200× ~~Pt~~ .315 .064 **6.8mm** MC621, V364, SC621 24mm wide; 12mm pitch;13 inch (1250 pieces per reel) ~~eeeeA~~ **300130123000 3012TR3000TR** — ~~a~~ 211 ~~ee~~ THMSMTSMT .664.520.520 .250.281.281 .914.745.585 .156.125.118 .210—— .125.125.062 .594.500.500 .047.047— ~~es~~ **12mm16mm** }} BR1216, CR1216, BR1220, CL1220BR1616, CR1612, CR1616,, CR1220, BR1225 32mm wide; 16mm pitch;13 inch reel 44mm wide; 24mm pitch;(1000 pieces per reel) ~~en~~ eS **3013** ~~CO~~ **—** 2 THM .664 .250 .723 .145 .265 .062 .594 — } CR1620, CR1632 13 inch reel (600 pieces per reel) **3002 3002TR** 1 SMT .831 .371 1.210 .156 — .200 .775 .093 BR2016, CR2016, DL2016, ee **20mm** BR2020, CL2020, BR2025, 44mm wide; 24mm pitch; **3003** — 2 THM .831 .371 .890 .145 .265 .062 .775 — CR2025, DL2025, DR2032, 13 inch reel (500 pieces per reel) CR2032, DL2032 ~~Pt~~ **3004 3004TR** ~~ft~~ 1 ~~|~~ SMT ~~|~~ .939 ~~|~~ .371 ~~tT~~ 1.339 ~~rT~~ .145 ~~|~~ — ~~|~~ .200 .939 .093 } BR2320, CL2330, CR2320, 56mm wide; 32mm pitch; ~~a—~~ **30053010** ~~ee~~ **3010TR** ~~ee~~ — ~~ee~~ 21 THMSMT .939.939 .371.371 1.3391.004 ~~ee~~ .240.145 .256— ee .200.062 ~~ee~~ .819.939 .093— ~~A~~ **23mm** } BR2325, CR2325, DL2325 13 inch reel (400 pieces per reel)56mm wide; 32mm pitch ~~Vpeea~~ **301130063007** ~~|OO~~ **3006TR** —— ~~|~~ 212 ~~|~~ THMTHMSMT ~~tf~~ 1.000 1.000 .939 ~~{|~~ .371.371.371 ~~|~~ 1.400 1.0041.065 ~~fT~~ .156.240.145 ~~ff~~ .351.265— .200.062.062 ~~[|~~ .918.819.918 .093 — — ~~A~~ **23mm24mm** } CR2354, DL2354CR2430, DL2430 13 inch reel (200 pieces per reel)56mm wide; 32mm pitch;13 inch reel (400 pieces per reel) } ~~SSaeen~~ **30083009 3008TR** ~~a~~ — 12 THMSMT 1.0001.000 .500.500 ~~SS~~ 1.4001.059 .230.230 .350— .200.062 ~~ee~~ .890.890 .093— ~~A~~ **24mm** } CR2450, DL2450 ~~ee~~ 56mm wide; 32mm pitch;13 inch reel (200 pieces per reel) **LOW PROFILE SURFACE & THRU HOLE MOUNT COIN CELL HOLDERS** 

Designed for quick and easy installation and replacement of 2032 coin cell lithium batteries. The contacts of these holders are polarized to assure proper continuity and circuit protection. 

**==> picture [56 x 26] intentionally omitted <==**

**----- Start of picture text -----**<br>
Thru Hole Mount<br>Mounting Detail<br>**----- End of picture text -----**<br>


**==> picture [69 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
CAT. NO. 1059  (Bulk)<br>**----- End of picture text -----**<br>


- Polarized Holder • Low Profile for densely packaged PCB’s 

- Retains cell securely to withstand shock • Compatible with vacuum and mechanical and vibration pick & place assembly systems 

- Reliable dual spring contacts assure low • Conductive polystyrene carrier tape meets contact resistance ANSI/EIA – 481 standard 

## **MATERIAL** 

- **Contacts:** .006 Phosphor Bronze, Electro-Solder over Nickel Plate **Base:** Glass Filled LCP, UL Rated 94V-0 

**==> picture [242 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
Surface Mount<br>Pad Layout<br>r }+— 866 ——-+| an PT eae<br>CAT. NO. 1060  (Bulk) CAT. NO. 1060TR  (Tape & Reel)<br>Tape & Reel Spec’s:  44mm wide; 24mm pitch; 13 inch reel (500 pieces per reel)<br>**----- End of picture text -----**<br>


_31-07 20th Road • Astoria, New York 11105-2017  • (718) 956-8900 • FAX (718) 956-9040 e-mail: kec@keyelco.com • WebSite: keyelco.com_ 

**8**