1-2061980-0

## **FullAXS CONNECTOR SEALING & CABLE ASSEMBLY** System Solution Guide 

## Next Generation x-TTA Solution 

Next generation WiMAX and Long Term Evolution (LTE) Fiber/Power/Signal To The Antenna (x-TTA) connectivity designs require rugged cable assemblies for outdoor use. For direct connection, these cable assemblies need to plug directly into the optical transceivers or other connector types though a bulkhead construction. 

For this specific application, the connector design will need to accommodate for a large tolerance in Z-direction. Furthermore, the connector shell must allow for easy one handed mating. TE Connectivity’s (TE) FullAXS connector sealing systems were designed to function with a very large Z-axis tolerance, hence accommodating for the broadest range of transceivers on the market. This unique feature allows end users to pick almost any transceiver they wish. 

The FullAXS connector sealing system and cable assembly includes FullAXS Mini and FullAXS connector sealing products. 

DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

**Overview** 

## Product Portfolio 

## **CONNECTOR SEALING** 

**==> picture [196 x 61] intentionally omitted <==**

**----- Start of picture text -----**<br>
FullAXS<br>Connector<br>FullAXS Mini  (36mm)<br>Connector<br>(29.2mm)<br>**----- End of picture text -----**<br>


## **BULKHEADS** 

**==> picture [167 x 163] intentionally omitted <==**

**----- Start of picture text -----**<br>
FullAXS Mini  FullAXS<br>eeeee “a<br>29.2mm 36mm<br>**----- End of picture text -----**<br>


DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

PAGE 2 

## **FullAXS Mini Connectors** 

FullAXS Mini connectors deliver the small size and scalability to design in power and signal connectivity anywhere on the box. Their easy-to-install mating features and ruggedized protection allow them to be installed in virtually any environment. 

## 

FullAXS Mini connectors are about 20% smaller than FullAXS products and can be placed anywhere on the box thanks to their fl exible sealing system. As space in the bottom of the box gets smaller and smaller, FullAXS Mini connectors make it easy to transmit power or signal using connections anywhere. Their modular design make them scalable in form, fi t and function. 

## Mating Made Easy 

FullAXS Mini connectors are one of the only products available that enable one-handed, blind installs from any angle including upside down. With 3-sense locking feedback, fl oating connection and a twist angle of only 30[o] ,  FullAXS Mini connectors can be installed by fi eld engineers of all levels of experience in virtually any location. 

## **Applications** 

- Wireless outdoor applications 

- WiMAX and LTE base stations 

- Remote Radio Heads (RRH) 

- Industrial outdoor applications 

- Robotics 

- Aerospace and defense 

## **Specifi cations** 

## Long Lasting in Harsh Environments 

FullAXS Mini connectors deliver a water tight seal up to IP67 and IP65 levels, use UV material to meet F1 rating, UL 94-V0 and withstand lightning strike requirements per IEC 62305-1 for shielded version, up to 20kA at 10/350 micro sec. 

## Environmental 

- IP65 and IP67 (IEC 60529) 

- Operating temperature range: 

- -40[o] C to 85[o] C 

- Salt spray (EIA 364-26B Condition A) 

- UL F1 rated (ISO 4892-3) 

- Flammability rating UL94-V0 

- RoHS/Reach Product Compliance 

## Mechanical 

- 100 mating cycles (EIA-364-9) 

- 150 N side load (IEC 60512-17-1 / EIA-364-38) 

- 150 N pull force (IEC 60512-17-1 / EIA-364-38) 

- Vibration 10-150-10Hz sweeping (IEC 60512-6-4) 

## Application Spec 

- 114-32138 

## Product Spec 

- 108-19486 

DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

PAGE 3 

**FullAXS Mini Connectors** 

## Key Product Features 

## 

- About 20% smaller than FullAXS connectors 

- Flexible sealing system allows connectors to be placed anywhere on the box 

- Modular design makes connectors scalable in form, fi t and function 

**==> picture [203 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
30 [o]<br>«<br>**----- End of picture text -----**<br>


## **Mating Made Easy** 

- Twist angle to lock the robust bayonet is only 30[o] 

- Enables one-handed, blind installs from any angle using only thumb and index fi nger to easily grip the tapered back end of the connector 

- 3-sense locking feedback: visual, audio  and tangible 

- Floating connector solution secures correct mating in Z-direction 

## **Long Lasting in Harsh Environments** 

- Ingress protection according to IP65 and IP67 

- UV material meets F1 rating, UL 94-V0 

- Withstand lightning strike requirements per IEC 62305-1 for shielded version, up to 20kA at 10/350 micro sec 

DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

PAGE 4 

## **FullAXS Mini Connectors** 

## Products 

## **FIBER OPTIC FLOATING CABLE ASSEMBLY** 

## **Features** 

- Open bulkhead for easy access to SFP 

- Bulkhead cutout allows for removal of transceiver through the bulkhead (no need to open Remote Radio Head (RRH) for transceiver replacement) 

- Water proof, dust proof and corrosion resistant 

- Z-axis 

- No cable buckling during or after installation 

## **Specifi cations** 

## Mechanical/Electrical 

- 100N pull force at cable (IEC 60512-17-1 / EIA-364-38) 

- 50 N side load in all directions at cable (IEC 60512-17-1 / EIA-364-38) 

Optical Duplex LC Interconnect 

   - Insertion loss 0.3dB (SM) and 0,5dB (MM) (IEC 61300-3-4 method B) 

   - Return loss 50dB (SM) and 30dB (MM) (IEC 61300-3-6 method 1) 

- Controlled ferrule compression force (IEC spec 61300-3-22) 

- PIM < -140dBc of 38dBm at 1800MHz 

## **FIXED COPPER CABLE ASSEMBLY** 

## **Features** 

- Cable diameter max. 9.5mm, • Fixed versions for ET power using the same outer shell as and RJ45 FO version (29.2mm) • ET power connector fi xed 

   - ET power connector fi xed with body alignment adapters in inner body for easy, one-handed mating with blind mate feature 

- Fully shielded from the braid 360 degrees to the box wall for best performance 

- Length to panel (w/o boot) 80mm 

## **Specifi cations** 

## Mechanical 

- 50 mating cycles (EIA-364-9) 

## Electrical 

- 20A simultaneously 

- Voltage max 60V 

- Protection against lightning up to 20 kA at 10/350 μ s (IEC 62305-1) 

- EMI protected 1 GHz at -30dB (IEC 60512-23-1) 

- DATA TBD 

DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

**PAGE 5** 

**FullAXS Mini Connectors** ee 

## Products 

**FIELD INSTALLABLE** 

## **Features** 

- Fiber DPX “fool proof” design protects the fi ber cable during uninstallation by preventing the outer shell being turned before the nut is unscrewed (see diagrams below) 

- Long version includes clamp to tube 

• Plug diameter 29.2mm 

FullPROOF 80 & 140 FullPOWER 

_— FullFLEX 500 

## **“Fool Proof” Feature** 

**==> picture [461 x 331] intentionally omitted <==**

**----- Start of picture text -----**<br>
Installaltion of FullPROOF<br>Latch on bayonet<br>shell goes into the<br>groove in the threads<br>3<br>5<br>1<br>6<br>4<br>2<br>Uninstall of FullPROOF<br>. |i I. t '<br>Nut locks the latch in the<br>groove, preventing the  Toolless 2<br>bayonet shell from being<br>disconnected fi rst<br>3<br>Hand  1<br>Tightened<br>Foolproof<br>**----- End of picture text -----**<br>


DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

**PAGE 6** 

**FullAXS Mini Connectors** a 

Products 

## **BULKHEAD; DIE CAST BAYONET** 

**==> picture [38 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard<br>**----- End of picture text -----**<br>


EMI Shielded oO 

## **Features** 

- Cost effective metal diecast 

- 2 bulkhead versions available: standard and EMI shielded 

- Transceiver fully protected in the bulkhead 

- Cut-out for easy access to SFP module 

- Bayonet style of locking 

- Ingress protection according to IP65 and IP67 sealing 

- Keying 

- Same bulkhead for fiber, RJ45, PoE, power and signal applications 

- Shielded and unshielded dust caps available 

- Rectangular or square footprint 

Part Numbers **FullAXS Mini Fiber Assemblies Part Number Description** 2061980-X ~~oO~~ 

|**Part Number**<br>~~oO~~|**Description**|
|---|---|
|2061980-X<br>~~oO~~|FOSM GLARO LEAD 4.8 mm FXS Mini|



## **FullAXS Mini Field Installable Kits** 

|**Part Number**|**Description**|
|---|---|
|2061920-1|FullPROOF80 Mini Field Install Kit|
|2061973-1|FullPROOF140 Mini Field Install Kit|
|2061926-1|FullFLEX500 Mini Field Install Kit|
|2061933-1|FullPOWER Mini Field Install Assembly Kit|



## **FullAXS Mini Bulkhead Sub-Assemblies** 

|**Part Number**|**Description**|
|---|---|
|2061870-1|FullAXS MINI Bulkhead, EMI|
|2061981-1|FullAXS MINI Bulkhead|
|2061953-1|FullAXS MINI Bulkhead Cap, EMI Shielded|
|2061953-2|FullAXS MINI Bulkhead Cap|



DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

**PAGE 7** 

## **FullAXS Connectors** 

## **Applications** 

- WiMAX and LTE Base Stations 

- Remote Radio Heads (RRH) 

- Industrial outdoor applications 

- Robotics 

- Aerospace & Defense 

## **Key Features** 

- Open bulkhead for easy access to SFP 

- Positive mechanical feedback to operator when fully mated 

- One-hand mating 

- Duplex LC interface 

## **Mechanical** 

- Designed to meet 150 N cable retention 

- Designed to meet IP67 

- LC interface 

- Single- and Multimode 

- Adapter footprint : 36mm x 36mm 

- Bayonet style locking 

- Duplex LC interconnect MM or SM 

- No tools required 

- Operating temperature : -40ºC to +70ºC 

- Mating durability min : 100 cycles. 

## **Specifications** 

- Temperature : -40°C to +70°C 

- 150 N Pull Force : per IEC61300-2-4 

- Protection Class : IP 65 (IP 67 on request) 

- 100 Mating Cycles 

   - Bulkhead cutout allows for removal of transceiver through the bulkhead (no need to open RRH for transceiver replacement) 

   - Robust bayonet locking for easy, fast, and secure mating 

   - Multimode and single mode 

   - Water proof, dust proof and corrosion resistant. 

   - Expansion to RJ45 and Power possible 

   - Plug has tolerance free design, fully free floating on Z-axis 

   - No cable buckling during or after installation. 

   - Cost effective metal die cast bulkhead 

   - Field installable version available 

- Vibration : per IEC 61300-2-1 

- Salt mist : per IEC 61300-2-26 

- Impact : per IEC 61300-2-12 

- Temperature/Humidity : per IEC 61300-2-22 

DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

**PAGE 8** 

## **FullAXS Connectors** 

Part Numbers 

## **FullAXS Bulkhead** 

|**Part Number**|**Description**|
|---|---|
|2061433-1|FOAC FullAXS bulkhead assembly|



## **FullAXS Cable Assembly** 

|**Part Number**|**Description**<br>**Fiber Size**<br>**Available Lengths**|
|---|---|
|2061432|FOSM LEAD 4.8mm FULLAXS LC/DPX - LC/DPX<br>Single mode<br>1-999 m|
|2061506|FOMM50 LEAD 4.8mm FULLAXS LC/DPX - LC/DPX<br>Multimode (50/125)<br>1-999 m|



DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY 

**PAGE 9** 

## For More Information 

te.com/products/fullaxs 

TE Technical Support Center USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 

## **te.com** 

> © 2015 TE Connectivity Ltd. family of companies. All Rights Reserved. FullAXS, TE Connectivity, TE, and TE Connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. 

4-1773460-4  DTC 03/2015 

DATA COMMUNICATIONS / FullAXS CONNECTOR SEALING & CABLE ASSEMBLY