1-1414122-0

Automotive Relays Plug-in Maxi ISO Relays 

## **Shrouded Power Relay F7 A** 

## ■ **Pin assignment similar to ISO 7588 part 1** 

■ **Customized versions on request** 

- **Integrated components (e.g. resistor, diode) – Customized marking/color** 

- **Special cover with bracket** 

## Typical applications 

Cross carline up to 70A for example: ABS control, blower fans, cooling fan, energy management, engine control, fuel pump, heated front screen, ignition, lamps: front, rear, fog light, main switch/supply relay, wiper control. 

F136_fcw1_bw 

|~~**Contact Data**~~||
|---|---|
|Contact arrangement|1 form A, 1 NO|
|Rated voltage|12VDC|
|Limiting continuous current<br>23°C<br>85°C<br>125°C<br>Limiting making current1)|70A<br>50A<br>30A<br>240A|
|Limiting breaking current|70A|
|Limiting short-time current<br>overload current, ISO 8820-32)|1.35 x 50A, 1800s|
||2.00 x 50A, 5s|
||3.50 x 50A, 0.5s|
||6.00 x 50A, 0.1s|
|Jump start test, ISO 16750-1|24VDC for 5min,|
|conducting nominal current at 23°C||
|Contact material|Silver based|
|Min. recommended contact load3)|1A at 5VDC|
|Initial voltage drop at 10A,||
|form A (NO) contact, typ./max.|15/200mV|
|Frequency of operation at nominal load|6 ops./min (0.1Hz)|
|Operate/release time typ.|7/2ms4)|
|Electrical endurance|>2x105ops.|
|resistive load, NO contact|50A, 14VDC|



## ~~**Contact Data** (continued)~~ 

## Mechanical endurance >1x10[6] ops. 

- 1)  The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 

- 2)  Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 

- 3)  See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 

- 4)  For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding. 

## ~~**Coil Data**~~ 

|Rated coil voltage|Rated coil voltage|||12VDC||
|---|---|---|---|---|---|
|**Coil versions, DC coil**||||||
|Coil|Rated|Operate|Release|Coil|Rated coil|
|code|voltage|voltage|voltage|resistance5)|power5)|
||VDC|VDC|VDC|Ω±10%|W|
|004|12|7.2|1.6|90|1.6|



- 5) Without components in parallel. 

All figures are given for coil without pre-energization, at ambient temperature +23°C. 

## **Max. DC load breaking capacity** 

## **Coil operating range** 

**==> picture [23 x 4] intentionally omitted <==**

**----- Start of picture text -----**<br>
ECR0629-N<br>**----- End of picture text -----**<br>


**==> picture [520 x 187] intentionally omitted <==**

**----- Start of picture text -----**<br>
136J_OVR2<br>3 0<br>| [200][ Att] [PN] . [——_K_F] [NEE] CoilGG 90 Q , 560 Q parallel resistor<br>NG NI \A 2 5 BEEEEEEEEEEEEa EEE Umax  EEEEEEEEEEEEE ETH<br>’ PRRs SEE<br>\ ‘ \ a a<br>2 100 KENEENANCESNOORNolane2AKNGNYeatin PENXNSNNSS EAH 2 0 EERE sea  EEREE E E RE EEEER RSEESSE EEE EEE E EEEEEEE<br>50 PT TIN OUNMRLEE.  NN— LLNSS XX r | [ 1 5 esaSG<br>FC ROSSI SEE EEE EERE EEE EERE EEE EEE EEE SS<br>Uop (E = 13,5 V)<br>PATE NENNI iN ENTENI NNEE 1 0 EEEEEEEEREEEERE EERE EEEEEPEPER E E ECEee<br>\ NO NI N\ a<br>NEN IPN NON aeREESE a<br>NN 5 BREE Uop (E = 0 V) EEREEEE<br>SONG Cy aa EEEEEE<br>a<br>0<br>1 ; NX aK Nv N a<br>0,5 1 5 10 50 70 -4 0 -2 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0<br>Switching current [A] ———» Ambient temperature in °C<br>Load limit curve 1: arc extinguishes during transit time (changeover contact).  Does not take into account the temperature rise due to the contact current<br>Load limit curve 2: safe shutdown, no stationary arc (make contact).  E = pre-energization.<br>Load limit curves measured with low inductive resistors verified for 1000 switching events.<br>Coil voltage in V<br>**----- End of picture text -----**<br>


1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

02-2017, Rev. 0217 www.te.com © 2017 TE Connectivity. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Automotive Relays Plug-in Maxi ISO Relays 

## **Shrouded Power Relay F7 A** (Continued) 

|~~**Insulation Data**~~|||||~~**Other Data**(continued)~~||
|---|---|---|---|---|---|---|
|Initial dielectric strength|||||Terminal type|plug-in, QC|
|between open contacts|||500Vrms||Cover retention||
|between contact and coil|||500Vrms||pull force|150N|
|between adjacent contacts|||500Vrms||push force|200N|
|Load dump test|||||Terminal retention||
|ISO 7637-1 (12VDC), test pulse 5|ISO 7637-1 (12VDC), test pulse 5||Vs=+86.5VDC||pull force|150N|
|ISO 7637-2 (24VDC), test pulse 5|2 (24VDC), test pulse 5||Vs=+200VDC||push force|150N|
||||||Weight|approx. 60g (2.1oz)|
||||||Packaging unit|108 pcs.|
|~~**Other Data**~~|||||6)  Refers to used materials.||
|EU RoHS/ELV compliance<br>Protection to heat and fire according UL94|||compliant<br>re according UL94<br>HB or better6)||7) No change in the switch.ing state >10μs. Valid for NC contacts, NO contact values<br>significantly higher.||
|Ambient temperature|||-40 to 125°C||||
|Climatic cycling with condensation,<br>EN ISO 6988|||6 cycles, storage 8/16h||~~**Accessories**~~<br>For fitting connectors please contact us via online Support Center||
|Temperature cycling,|||||||
|IEC 60068-2-14, Nb|10 cycles, -40/+85°C (5°C/min)||||||
|Damp heat cyclic,|||||||
|IEC 60068-2-30, Db, Variant 1|6 cycles, upper air temp. 55°C|6 cycles, upper air temp. 55°C|||||
|Damp heat constant, IEC 60068-2-3, Ca|Damp heat constant, IEC 60068-2-3, Ca|Damp heat constant, IEC 60068-2-3, Ca|56 days||||
|Category of environmental protection,|Category of environmental protection,||||||
|IEC 61810|||RT III – sealed||||
|Degree of protection, IEC 60529|||IP67 (sealed)||||
|||only with special connector|||||
|Vibration resistance (functional)|||||||
|IEC 60068-2-6 (sine sweep)|||10 to 500Hz, min. 10g7)||||
|Shock resistance (functional)|||||||
|IEC 60068-2-27 (half sine)|||6ms, min. 30g7)||||
|Drop test, free fall, IEC 60068-2-32|||1m onto concrete||||



## **Terminal Assignment** 

**==> picture [87 x 98] intentionally omitted <==**

**----- Start of picture text -----**<br>
NOR<br>1 form A, NO with resistor<br>2 5<br>1 3<br>**----- End of picture text -----**<br>


2 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

02-2017, Rev. 0217 www.te.com © 2017 TE Connectivity. 

Automotive Relays Plug-in Maxi ISO Relays 

## **Shrouded Power Relay F7 A** (Continued) 

## **Dimensions** 

**==> picture [482 x 370] intentionally omitted <==**

**----- Start of picture text -----**<br>
, Il : ©<br>24 0,5<br>/ | a eS<br>eA ro 4<br>54,2<br>UA} | ; TE136J_DD2<br>TE136_DD5<br>View of the terminals (bottom view)<br>10,9 0,5<br>|<br>TE136J_DD1<br>32,4<br>TE136J_VT1<br>5,5<br>TE136J_VT1<br>TE136_BV1<br>0,5 0,5<br>0,1<br>35,2<br>6,7<br>30<br>6,4<br>4,6<br>3,2<br>39,6<br>**----- End of picture text -----**<br>


## **Product code structure** 

Typical product code **V23136 -J 1 004 -X050** 

**Type V23136** Power Relay F7 A **Contact arrangement J** 1 form A, 1 NO **Cover 1** Bracket at terminal 3 **Coil 004** 12VDC **Terminal/arrangement Xnnn** Customized (nnn: version number) 

**Product code Arrangement Cover Coil suppr. Circuit[1)] Coil Contact material Terminals Part number** ~~**G**~~ V23136-J1004 ~~e~~ -X050 1 Form A, 1 NO Standard Resistor 560Ω ~~G~~ NOR ~~GO~~ 12VDC Silver based Plug-in, QC ~~(~~ 1-1414122-0 1) See terminal assignment diagrams. Other types on request. 

This list represents the most common types and does not show all variants covered by this datasheet. 

3 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

02-2017, Rev. 0217 www.te.com © 2017 TE Connectivity. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions