1-1393217-8

General Purpose Low Power PCB Relays 

**SCHRACK** 

## **Miniature PCB Relay RE** 

> n **1 pole 6 A, 1 form A (NO) contact** 

> n **Sensitive coil 200 mW** 

> n **4 kV coil-contact** 

> n **Optimized height 10.6mm** 

> n **PCB area 200mm[2]** 

## n **Wash tight** 

> n **Product in accordance to IEC 60335-1 (domestic appliances)** 

## Typical applications 

PLC’s, timers, temperature control, I/O cards, white goods. 

## Z 

## ~~**Approvals**~~ 

VDE Cert. No. 40010578, UL E214025 Technical data of approved types on request. 

## ~~**Contact Data**~~ 

|~~**Contact Data**~~|||
|---|---|---|
|Contact arrangement|1 form A (NO)||
|Rated voltage|250VAC||
|Max. switching voltage|400VAC||
|Rated current|6A||
|Limiting making current, max 4s, duty factor 10%<br>15A|||
|Breaking capacity max.|1500VA||
|Contact material|AgNi 0.15, AgNi 90/10||
|Frequency of operation, with/without load|360/72000 ops./h||
|Operate/release time max.|10/5ms||
|Bounce time max.|4ms||
|**Contact ratings**|||
|Type<br>Contact  Load<br>Cycles<br>**IEC 61810**<br>RE034<br>A (NO)<br>6A, 250VAC, cosφ=1, 70°C<br>100x103<br>**UL 508**<br>RE034<br>A (NO)<br>6A, 250VAC,general purpose, 70°C<br>100x103<br>RE034<br>A (NO)<br>B300 pilot duty 40°C<br>6x103<br>Mechanical endurance<br>>30x106ops.<br>~~OO~~<br>~~OO~~<br>~~OO~~|||



## ~~**Coil Data**~~ 

|~~**Coil Data**~~|~~**Coil Data**~~|||||
|---|---|---|---|---|---|
|Coil voltage range||||5 to 48 VDC||
|Operative range, IEC 61810||||2||
|Coil insulation system according UL1446||||F||
|**Coil versions, DC coil**||||||
|Coil|Rated|Operate|Release|Release<br>Coil|Rated coil|
|code|voltage|voltage|voltage|resistance|power|
||VDC|VDC|VDC|Ω±10%1)|mW|
|5|5|3.5|0.5|125|200|
|6|6|4.2|0.6|180|200|
|9|9|6.3|0.9|405|200|
|12|12|8.4|1.2|720|200|
|18|18|12.6|1.8|1620|200|
|24|24|16.8|2.4|28801)|200|
|48|48|33.6|4.8|115201)|200|



1) Coil resistance ±15%. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 

~~**Insulation Data**~~ \ SO Fae 250V0C Initial dielectric strength between open contacts 1000Vrms 10 — eo we Nf | | | | between contact and coil 4000V ~~rms~~ Initial insulation resistance oea —— a open contact circuit >10x10[9] Ω So IPa pLNT coil-contact circuit >10x10[9] Ω pa Clearance/creepage between contact and coil ≥4/4mm Se8$0196 UI)10 ~~-~~ D01 0,2 05 1 2 DC5 current10 20[A] corseol 0FRESE|1 [|2 [|3 [|4 Switching|5 76current|7 [A]|8 ~~SWa~~ Material group of insulation parts Tracking index of relay base PTI250VIIIa 

1 

Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

07-2018, Rev. 0718 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

General Purpose Low Power PCB Relays 

**SCHRACK** 

## **Miniature PCB Relay RE** (Continued) 

## ~~**Other Data**~~ 

|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|
|---|
|refer to the Product Compliance Support Center at<br>www.te.com/customersupport/rohssupportcenter<br>Resistance to heat and fire<br>according EN 60335, par.30<br>~~a~~|
|Ambient temperature<br>-40 to +70°C|
|-40 to +85°C at 4A<br>Category of environmental protection<br>IEC 61810<br>RTIII - wash tight<br>Vibration resistance (functional)<br>10g<br>Terminal type<br>PCB-THT<br>~~TT~~|
|Resistance to soldering heat THT|
|IEC 60068-2-20<br>260°C/5s|
|Packaging/unit<br>tube/25 pcs., box/500 pcs.<br>~~OO~~|



**PCB layout / terminal assignment** Bottom view on solder pins 

## **Dimensions** 

**Product code structure** Typical product code **RE 0 3 2 012** 

**Type RE** Miniature PCB Relay RE 

- **Version 0** Wash tight 

- **Contact Configuration 3** form A (NO) contact 

- **Contact material 1** AgNi 0.15 **2** AgNi 0.15 gold plated **5** AgNi 90/10 gold plated **4** AgNi 90/10 

- **Coil** Coil code: please refer to coil versions table 

|**Product code**|**Version**|**Contacts**|**Contact material**|**Coil**|**Part Number**|
|---|---|---|---|---|---|
|RE031005<br>RE031006<br>RE031012<br>RE031024<br>RE032005<br>RE032006<br>RE032012<br>RE032024<br>RE032048<br>RE034005<br>RE034006<br>RE034012<br>RE034024<br>RE034048<br>RE035012<br>RE035024|wash tight|NO contacts|AgNi 0.15|5VDC|2-1415402-1<br>1-1393217-3<br>1-1393217-5<br>1-1393217-8<br>1-1393217-9<br>2-1393217-0<br>2-1393217-2<br>2-1393217-4<br>2-1393217-5<br>2-1416010-3<br>2-1416010-4<br>2-1416010-6<br>2-1416010-7<br>2-1416010-8<br>1956226-1<br>1956226-2|
|||||6VDC||
|||||12VDC||
|||||24VDC||
||||AgNi 0.15<br>gold plated|5VDC||
|||||6VDC||
|||||12VDC||
|||||24VDC||
|||||48VDC||
||||AgNi 90/10|5VDC||
|||||6VDC||
|||||12VDC||
|||||24VDC||
|||||48VDC||
||||AgNi 90/10 gold plated|12VDC||
|||||24VDC||



Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

2 07-2018, Rev. 0718 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company.