0ZCK0010FF2G

**==> picture [158 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
[HF]@B OZCK Series -0805 Chip<br>**----- End of picture text -----**<br>


## OZCK Series RoHS 6 Compliant & Halogen-Free 

## Application 

All high-density boards Product Features 

0805 Chip Size , Fast Trip Time, Low DCR Resistance 

- Operating (Hold Current) Range 

100mA - 1A 

- Maximum Voltage Temperature6 - 15V (per table)Range -40°C to 85°C 

- el Agency Approval 

- KR TUV (Std. EN60738-1-1, Cert. R50102117) . ‘a . UL Component (Std. UL1434, File E305051) 

- OS Yd UL Conditions of Acceptability: a limiting device. 

- & ; 1. These devices have been investigated for use in safety circuits and are suitable as 2. These devices have been calibrated to limit the current to 8 amps within 5 seconds, per ANSI/NFPA 70, “National Electrical Code”. 

**==> picture [57 x 25] intentionally omitted <==**

**----- Start of picture text -----**<br>
a cWAdus<br>**----- End of picture text -----**<br>


LEAD FREE = (P8) ; _ Electrical Characteristics (23) HALOGEN FREE = [HF] Hold Trip Rated |Maximum | Typical Max Time to Trip| Resistance Tolerance | Agency Approvals SA [A [Wm vae) omc [paw [A [Soe | Ohm | Ome | wv ‘B]azcxoozorras | oz0 | 080 | @ | 1 | os | ao | ec | oa | aso | Y |v | new seESOZCKOOSOAFZE | 0.50 | 1.00 | 9 | 100 | 05 | 800 | 010 | 0.180 | 0.850 El ozckoorsrree | 075 | 150 | 6 | 40 | 06 | 800 | 020 | 0.090 | 0.950 ozcKoroorr2e | 100 | 195 | 6 | 40 | 06 | 800 | 030 | 0.060 | o.210 IH Hold Current-maximum current at which the device will not trip in still air at 23°C. IT Trip Current-minimum current at which the device will always trip in still air at 23°C. Imax Maximum fault current device can withstand without damage at rated voltage (Vmax). Vmax Maximum voltage device can withstand without damage at its rated current. Pd Typical power dissipated by device when in tripped state in 23°C still air environment. Rmin Minimum device resistance at 23°C. R1imax Maximum device resistance at 23°C, 1 hour after initial device trip, or after being soldered to PCB in end application. 

**==> picture [197 x 56] intentionally omitted <==**

**----- Start of picture text -----**<br>
° 320s<br>alinOyen asinPie.. SOLUTIONS &<br>fe ( “iM PROTECTION<br>ES ‘sa<br>“Se = abel group<br>**----- End of picture text -----**<br>


Specifications subject to change without notice . Bel Fuse Inc. 1 201.432.0463 206 Van Vorst Street techhelp@belf.com Jersey City, NJ 07302 USA belfuse.com 

© 2016 Bel Fuse, Inc. OZCK Nov2016 1 / 4 

**==> picture [188 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
surface Mount PTC<br>**----- End of picture text -----**<br>


**==> picture [159 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
[HF]@B OZCK Series -0805 Chip<br>**----- End of picture text -----**<br>


**==> picture [161 x 41] intentionally omitted <==**

**----- Start of picture text -----**<br>
OZCK Series<br>RoHS 6 Compliant & Halogen-Free<br>**----- End of picture text -----**<br>


PTC's - Basic Theory of Operation / “Tripped” Resistance Explanation Fundamentally, a Bel PTC consists of a block of polymeric material containing conductive filler and bonded between two conductive, planar terminations. 

At currents below the device IHOLD rating, AND at temperatures below 100C, the PTC maintains a resistance value below its R1 MAX rating. 

As the device's temperature approaches 130C, either due to an increase in ambient temperature or a current exceeding its | TRIP rating, volumetric expansion of the filled polymer breaks apart the majority of conductive pathways across the terminals created by chain contact of adjacent filler particles or device resistance increases sharply by several orders of magnitude. 

At the much higher “Tripped” resistance, there is just enough leakage current to allow internal heating to “hold” the device in its tripped state (around 125C) until power is interrupted. Once power is removed, the PTC's core cools and contracts allowing conductive chains to reform and return the device to its low resistance state. 

The catalog data for each device specifies a "Typical Power" value. This is the power required to exactly match the heat lost by the tripped device to its ambient surroundings at 23C. By Ohm's Law, power can be stated as: W = E42/R. Thus the approximate resistance of a “Tripped” PTC can be determined by: R = E*2/W, where "E" is the voltage appearing across the PTC (usually the supply's open circuit voltage), and "W" is the Typical Power value for the particular PTC. Since the PPTC acts to maintain a constant internal temperature, its apparent resistance will change based upon applied voltage and, to a lesser degree, ambient conditions. Consider the following example... 

A PTC with a Typical Power of 1 watt protecting a circuit using a 60V supply will demonstrate an apparent, tripped resistance "R" of: 

R = 6042/1 = 3,600 ohms 

This same tripped device when used to protect a 12V circuit would now present an apparent resistance of: R = 1242/1 = 144 ohms 

The value for Typical Power is "typical" because any physical factors that affect heat loss (such as ambient temperature or air convection) will somewhat alter the level of power that the PTC needs to maintain its internal temperature. In short, PTCs do not exhibit a constant, quantifiable tripped resistance value. 

**==> picture [144 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type Time - To - Trip at 237<br>**----- End of picture text -----**<br>


**==> picture [430 x 267] intentionally omitted <==**

**----- Start of picture text -----**<br>
(See Elec. Characteristics Table for P/N - Curve correlation)<br>A B C DEF<br>SS —<—<$<—$ — -_—= = — = — ===<br>————<br>SS |)ee<br>a a |<br>0 Lt<br>oy —— =NNeo A ae<br>ey2 PENee NNN<br>o SS | Ne, <P Ee<br>£ po NT TRON TN RIA TT TT<br>gs LENIN NANT<br>— a<br>re eee Soe ES<br>0.01<br>0.1 1 10<br>Fault Current (A)<br>Specifications subject to change without notice<br>POWER<br>See yee yee Bel Fuse Inc. +1 201.432.0463<br>206 Van Vorst Street techhelp@belf.com<br>Jersey City, NJ 07302 USA belfuse.com<br>**----- End of picture text -----**<br>


**==> picture [197 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ase POWER<br>Ee ie e See yee yee<br>Bet te<br>“Se = abel group<br>**----- End of picture text -----**<br>


© 2016 Bel Fuse, Inc. OZCK Nov2016 2 / 4 

**==> picture [526 x 638] intentionally omitted <==**

**----- Start of picture text -----**<br>
OZCK Series<br>[HF]@ OZCK Series -0805 Chip RoHS 6 Compliant & Halogen-Free<br>Pad Layout PTC Marking<br>Therecommendeddimensionspadin thelayout.table below provide the oo anb”, lH code.<br>Part Number | IH Code<br>weep][mmNominal [Nominals _] [Nominal]w_ | “OZCK0010FF2G||OZCKoot0Fr2c|0<br>| 1.20 | inch| 0.047 |  mm1.00 |  Inch0.039 |  mm1.50 |  inch}0.059 | |ozcKoo20rF2G|=F<br>OZCKOOSOFF2E| M<br>Termination Pad Materials OZCKOOSOAF2E]oN<br>Matte Tin - Plated Copper OZCKO075FF2Ei ee<br>Mechanical Dimensions OZCKO100FF2E; 1<br>(0.20-0.60mm) All dimensions in mm.<br>DA B. O10 04erem) SESE eT<br>Tnc1.20-1.60mm) ozckoororr2ePartNumber |[Min0.30 |  Max1.00 __| |<br>r azcxooaorr2 | 020 | 1.00 |<br>eaw——_— A I ozckoossFr2G | 0.25 | 0.75 _|<br>(2.00-2.30mm) ozckoosorF2eE | 055 | 1.25 |<br>|Top and Bottorn View ~ OZCKOO50AF2E 040<br>ave x ozexoorsFr2e | 0.55 | 1.25 |<br>Thermal Derating Curve ozckoroorr2e | 0.75; | 1.80 |<br>Cautionary Notes<br>Hold & Trip Current and Thermal Derating Curve 1. Operation beyond the specified maximum ratings or<br>improper use may result in damage and possible<br>300% electrical arcing and/or flame.<br>2. These Polymer PTC (PPTC) devices are intended for<br>= protection against occasional overcurrent/<br>® 250% overtemperature fault conditions and may not be<br>= me Lt suitable for use in applications where repeated and/or<br>— a D 2 ‘ te et) circ prolonged fault conditions are anticipated.<br>oO 5 200% ap | 3. Avoid contact of PTC device with chemical solvent.<br>zs = | Prolonged contact may adversely impact the PTC<br>os a! | _ performance.<br>ZO iso, Le ys = 4. These PTC devices may not be suitable for use in<br>S a circuits with a large inductance, as the PTC trip can<br>S$ A= generate circuit voltage spikes above the PTC rated<br>Ss  F 100% voltage.<br>c®2 ze 50% Nevic HT TTThBSista|| |eb kia | 5. Theseapplicationsshould devices be first only. are discussed Use intended in AC with for voltage Bel use Fuse in applications DC engineering. voltage<br>coated PCB’s. Restriction of free air flow could affect<br>2 6. Not recommended for use on potted or conformal<br>% electrical performance and/or result in device failure.<br>-40 -20 0 20 40 60 80 Consult Bel Fuse engineering.<br>Ambient Temperature (‘C) 7. In the “Indeterminate Performance / grey zone”,<br>tripping may occur but cannot be relied upon. For<br>a Hold Current — Trip-  Current region,special consultcircumstancesBel FuseconsideringEngineering.use within this<br>8. MSL: 2a (According to IPC J-Std-020).<br>Specifications subject to change without notice<br>t.4 is 7<br>a»AHEEERE [&] ors  >St POWER<br>Ee ie e See yee Bel Fuse Inc. +1 201.432.0463<br>te ee 206 Van Vorst Street techhelp@belf.com<br>“Se = abel group Jersey City, NJ 07302 USA belfuse.com<br>**----- End of picture text -----**<br>


© 2016 Bel Fuse, Inc. OZCK Nov2016 3/4 

OZCK Series 

> [HF]@ OZCK Series -0805 Chip RoHS 6 Compliant & Halogen-Free 

## Solder Reflow and Rework Recommendations 

**==> picture [522 x 530] intentionally omitted <==**

**----- Start of picture text -----**<br>
tp<br>Profile Feature Pb-Free Assemb! Tp eee eee a Critical Zonea<br>AveragePreheat  Ramp-Up: Rate (Tsmax to Tp 3°C/second max ftnnn|Ramp-up|<br>Temperature Min (Tsmin) 150°C @ [Tmax<br>Temperature Max (Tsmax) 200°C —ie ee<br>Time (tsmin to tsmax: 60-180 seconds S<br>Time maintained above: a Tein<br>Temperature(TL) 217°C E }<br>Time (tu 60-150 seconds be<br>Peak/Classification Temperature(Tp) : 260°C<br>TimeTemperatureRamp-Down within 5°CRate(tp of actual:  Peak : ——20-406°C/secondsecondsmax. - on25°C. to Peak|Tine ——> ;<br>Time 25°C to Peak Temperature :<br>Solder Reflow<br>Due to “ lead free / RoHS 6 ” construction of these PTC devices , the required Temperature and Dwell Time in the “ Soldering ”<br>zone of the reflow profile are greater than those used for non-RoHS devices.<br>1. Recommended reflow methods; IR, vapor phase oven, hot air oven.<br>2. Not Recommended For Wave Solder / Direct Immersion.<br>3. Recommended paste thickness range — 0.20 — 0.25mm.<br>4. Devices are compatible with standard industry cleaning solvents and methods.<br>5. MSL : 2a (According to IPC J-Std-020).<br>Caution<br>If reflow temperature / dwell times exceed the recommended profile, the electrical performance of the PTC may be affected.<br>Rework : MIL-STD-202G Method 210F, Test Condition A.<br>Standard Packaging P/N Explanation and Ordering Information<br>Part Number 4000 or 3000 fuses in 7 OZCK OXXX xX X Xx<br>OZCKOO10FF2G inchescla Reel, rm | cen es ee<br>azckonssFF2G 4,000 per EIA-481’  (equivalent’ 0ZCK,0805series Size<br>OZCKOOSOFF2E IEC-286 part 3). | HOLDRefer to  RatingPart Number and IH Rating in Electrical Characteristics Table on P.1.<br>Thru Electrical Characteristics<br>OZCKO1OOFF2E F = Standard Design<br>A to Z (except F) = Special, customer spec, DCR sort, etc.<br>Mechanical Features<br>F = Standard Design<br>A to Z (except F) = Special, customer spec, lead forming, etc.<br>Tape& Red Qty Sw”?<br>See standard packaging<br>ao Bente Specifications subject to change without notice<br>ARES > POWER<br>eee 206 Van Vorst Street techhelp@belf.com<br>“Se =~ abel group Jersey City, NJ 07302 USA belfuse.com<br>**----- End of picture text -----**<br>


© 2016 Bel Fuse, Inc. OZCK Nov2016 4/4