0ZCF0600FF2C

0ZCF Series 

## Surface Mount PTC 

0ZCF Series – 2920 Chip RoHS 2 Compliant 

## **Application** 

All high-density boards 

## **Product Features** 

- 2920 Chip Size, Fast Trip Time, High Hold Currents 

- AEC-Q Compliant 

- Meets Bel automotive qualification* 

- - Largely based on internal AEC-Q test plan 

## **Operating (Hold Current) Range** 

300mA – 7A 

## **Maximum Voltage** 

- 6 – 60V (per table) 

## **Temperature Range** 

- -40℃ to 85℃ 

## **Agency Approval** 

TUV (Std. EN60738-1-1, Cert. R50102117) UL Recognized Component (Std. UL1434, File E305051) 

- UL Conditions of Acceptability: 

1. These devices have been investigated for use in safety circuits and are suitable as a limiting device. 

## **AEC-Q Compliant** 

2. These devices have been calibrated to limit the current to 8 amps within 5 

seconds, per ANSI/NFPA 70, “National Electrical Code”. 

> [LEAD FREE =] 

## **Electrical Characteristics (23℃)** 

HALOGEN FREE = 

|~~|~~|Part Number<br>~~|~~|Hold<br>Current<br>~~a~~|Trip<br>Current<br>~~ee~~|Rated<br>Voltage<br>~~es~~|Maximum<br>Current<br>~~es~~|Typical<br>Power|Max Time to Trip<br>~~ESE~~|Max Time to Trip<br>~~ESE~~|Resistance Tolerance<br>~~ESE~~|Resistance Tolerance<br>~~ESE~~|AgencyApprovals<br>~~|Be~~|AgencyApprovals<br>~~|Be~~|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||||Current<br>~~ESE~~|Time<br>~~ESE~~|Rmin<br>~~ESE~~|R1max|~~|~~|~~Be~~<br>~~Tov~~|
|||IH,A<br>~~a~~|IT,A<br>~~ee~~|Vmax,Vdc<br>~~es~~|Imax,A<br>~~es~~|Pd,W|A<br>~~ESE~~|Sec<br>~~ESE~~|Ohms<br>~~ESE~~|Ohms|||
|A 0ZCF0030FF2C<br>~~|~~<br>~~a~~|A 0ZCF0030FF2C<br>~~|~~<br>~~a~~|0.30<br>~~a~~<br>~~a~~|0.60<br>~~ee ~~<br>~~a~~|60<br> ~~es~~<br>~~a~~|100<br>~~es~~<br>~~a~~|1.5<br>~~a~~|1.5<br>~~ESE~~<br>~~a~~|3.0<br>~~ESE~~<br>~~a~~|1.000<br>~~ESE~~<br>~~a~~|4.800<br>~~a~~|Y<br>~~| ~~<br>~~a~~|Y<br> ~~Be~~<br>~~Tov~~<br>~~a~~|
|B<br>~~a~~|0ZCF0050FF2C<br>~~a~~|0.50<br>~~a~~|1.00<br>~~a~~|60<br>~~a~~|100<br>~~a~~|1.5<br>~~a~~|2.5<br>~~a~~|4.0<br>~~a~~|0.300<br>~~a~~|1.400<br>~~a~~|Y<br>~~a~~|Y<br>~~a~~|
|C<br>~~ee~~|0ZCF0075FF2C<br>~~ee~~|0.75<br>~~ee~~|1.50<br>~~ee~~|33<br>~~ee~~|100<br>~~ee~~|1.5<br>~~ee~~|8.0<br>~~ee~~|0.3<br>~~ee~~|0.180<br>~~ee~~|1.000<br>~~ee~~|Y<br>~~ee~~|Y<br>~~ee~~|
||0ZCF0075AF2C<br>~~ee~~<br>~~a~~|0.75<br>~~ee~~|1.50<br>~~ee~~|60<br>~~ee~~|100<br>~~ee~~|1.5<br>~~ee~~|8.0<br>~~ee~~|0.3<br>~~ee~~|0.180<br>~~ee~~|1.000<br>~~ee~~|Y<br>~~ee~~|Y<br>~~ee~~|
|D<br>~~C—O~~|0ZCF0100AF2A<br>~~C—O~~|1.00<br>~~C—O~~|2.00<br>~~C—O~~|60<br>~~C—O~~|100<br>~~C—O~~|1.5<br>~~C—O~~|8.0<br>~~C—O~~|0.5<br>~~C—O~~|0.090<br>~~C—O~~|0.410<br>~~C—O~~|Y<br>~~C—O~~|Y<br>~~C—O~~|
||0ZCF0110FF2C<br>~~C—O~~<br>~~a~~|1.10<br>~~C—O~~|2.20<br>~~C—O~~|33<br>~~C—O~~|100<br>~~C—O~~|1.5<br>~~C—O~~|8.0<br>~~C—O~~|0.5<br>~~C—O~~|0.090<br>~~C—O~~|0.410<br>~~C—O~~|Y<br>~~C—O~~|Y<br>~~C—O~~|
|E 0ZCF0110AF2A<br>~~:~~<br>~~**a**~~|E 0ZCF0110AF2A<br>~~:~~<br>~~**a**~~|1.10<br>~~:~~<br>~~**a**~~|2.20<br>~~:~~<br>~~**a**~~|60<br>~~:~~<br>~~**a**~~|100<br>~~:~~<br>~~**a**~~|1.5<br>~~:~~<br>~~**a**~~|8.0<br>~~:~~<br>~~**a**~~|0.5<br>~~:~~<br>~~**a**~~|0.090<br>~~:~~<br>~~**a**~~|0.410<br>~~:~~<br>~~**a**~~|Y<br>~~:~~<br>~~**a**~~|Y<br>~~:~~<br>~~**a**~~|
|F|0ZCF0125FF2C|1.25|2.50|33|100|1.5|8.0|2.0|0.050|0.250|Y|Y|
|G 0ZCF0150FF2C<br>~~**a**~~|G 0ZCF0150FF2C<br>~~**a**~~|1.50<br>~~**a**~~|3.00<br>~~**a**~~|33<br>~~**a**~~|100<br>~~**a**~~|1.5<br>~~**a**~~|8.0<br>~~**a**~~|2.0<br>~~**a**~~|0.050<br>~~**a**~~|0.230<br>~~**a**~~|Y<br>~~**a**~~|Y<br>~~**a**~~|
|H|0ZCF0185FF2C|1.85|3.70|33|100|1.5|8.0|2.5|0.040|0.150|Y|Y|
|I<br>~~ee~~|0ZCF0200FF2C<br>~~ee~~|2.00<br>~~ee~~|4.00<br>~~ee~~|16<br>~~ee~~|100<br>~~ee~~|1.5<br>~~ee~~|8.0<br>~~ee~~|4.5<br>~~ee~~|0.035<br>~~ee~~|0.120<br>~~ee~~|Y<br>~~ee~~|Y<br>~~ee~~|
||0ZCF0200AF2C<br>~~ee~~<br>~~a~~|2.00<br>~~ee~~<br>~~a~~|4.00<br>~~ee~~|24<br>~~ee~~|100<br>~~ee~~|1.5<br>~~ee~~|8.0<br>~~ee~~|5.0<br>~~ee~~|0.035<br>~~ee~~|0.120<br>~~ee~~|Y<br>~~ee~~|Y<br>~~ee~~|
|J<br>~~a~~|0ZCF0250FF2C<br>~~a~~|2.50<br>~~a~~|5.00|16|100|1.5|8.0|16.0|0.025|0.085|Y|Y|
|K<br>~~[|~~|0ZCF0260FF2C<br>~~[|~~|2.60<br>~~[|~~|5.20<br>~~[|~~|6<br>~~[|~~|100<br>~~[|~~|1.5<br>~~[|~~|8.0<br>~~[|~~|20.0<br>~~[|~~|0.020<br>~~[|~~|0.075<br>~~[|~~|Y<br>~~[|~~|Y<br>~~[|~~|
||0ZCF0260AF2C<br>~~[|~~<br>~~a~~|2.60<br>~~[|~~<br>~~a~~|5.20<br>~~[|~~<br>~~a~~|24<br>~~[|~~|100<br>~~[|~~|1.5<br>~~[|~~|8.0<br>~~[|~~|20.0<br>~~[|~~|0.020<br>~~[|~~|0.075<br>~~[|~~|Y<br>~~[|~~|Y<br>~~[|~~|
|L<br>~~[|~~<br>|0ZCF0300FF2C<br>~~[|~~<br>~~a~~<br>~~a~~|3.00<br>~~[|~~<br>~~a~~<br>~~a~~|5.20<br>~~[|~~<br>~~a~~<br>~~a~~|6<br>~~[|~~|100<br>~~[|~~|1.5<br>~~[|~~|8.0<br>~~[|~~|25.0<br>~~[|~~|0.010<br>~~[|~~|0.048<br>~~[|~~|Y<br>~~[|~~|Y<br>~~[|~~|
||0ZCF0300AF2C<br>~~SC~~<br>~~eS~~<br>|3.00<br>~~SC~~<br>|5.20<br>~~SC~~<br>|15<br>~~SC~~<br>|100<br>~~SC~~<br>|1.5<br>~~SC~~<br>|8.0<br>~~SC~~<br>|20.0<br>~~SC~~<br>|0.010<br>~~SC~~<br>|0.048<br>~~SC~~<br>|Y<br>~~SC~~<br>|Y<br>~~SC~~<br>|
||0ZCF0300BF2C<br>~~SC~~<br>~~eS~~<br>|3.00<br>~~SC~~<br>|5.20<br>~~SC~~<br>|24<br>~~SC~~<br>|100<br>~~SC~~<br>|1.5<br>~~SC~~<br>|8.0<br>~~SC~~<br>|20.0<br>~~SC~~<br>|0.010<br>~~SC~~<br>|0.048<br>~~SC~~<br>|Y<br>~~SC~~<br>|Y<br>~~SC~~<br>|
|M 0ZCF0330FF2C<br> ~~a~~|M 0ZCF0330FF2C<br>~~eS~~<br>~~a~~|3.30<br>~~a~~|5.50<br>~~a~~|24<br>~~a~~|100<br>~~a~~|1.5<br>~~a~~|8.0<br>~~a~~|20.0<br>~~a~~|0.010<br>~~a~~|0.048<br>~~a~~|Y<br>~~a~~|Y<br>~~a~~|
|N<br> ~~a~~<br>~~|~~<br>~~a~~|0ZCF0400FF2A<br>~~a~~<br>~~|~~<br>~~a~~|4.00<br>~~a~~<br>~~a~~|8.00<br>~~a~~|16<br>~~a~~|100<br>~~a~~|1.5<br>~~a~~|20.0<br>~~a~~|4.0<br>~~a~~|0.010<br>~~a~~|0.040<br>~~a~~|Y<br>~~a~~|Y<br>~~a~~|
|O 0ZCF0500FF2A<br>~~|a~~|O 0ZCF0500FF2A<br>~~|a~~|5.00<br>~~a~~|10.00<br>~~a~~|16<br>~~a~~|100<br>~~a~~|1.5<br>~~a~~|20.0<br>~~a~~|5.0<br>~~a~~|0.005<br>~~a~~|0.025<br>~~a~~|Y<br>~~a~~|Y<br>~~a~~|
|P<br>~~a~~<br>~~SS~~|0ZCF0600FF2C<br>~~a~~<br>~~SS~~|6.00<br>~~a~~<br>~~SS~~|12.00<br>~~a~~<br>~~SS~~|12<br>~~a~~<br>~~SS~~|100<br>~~a~~<br>~~SS~~|2.0<br>~~a~~<br>~~SS~~|30.0<br>~~a~~<br>~~SS~~|2.0<br>~~a~~<br>~~SS~~|0.004<br>~~a~~<br>~~SS~~|0.020<br>~~a~~<br>~~SS~~|Y<br>~~a~~<br>~~SS~~|Y<br>~~a~~<br>~~SS~~|
|Q0ZCF0700FF2C<br> ~~SS~~<br>~~a~~|0ZCF0700FF2C<br>~~SS~~<br>~~a~~|7.00<br>~~SS~~<br>~~a~~|14.00<br>~~SS~~|12<br>~~SS~~|100<br>~~SS~~|2.0<br>~~SS~~|35.0<br>~~SS~~|2.0<br>~~SS~~|0.003<br>~~SS~~|0.018<br>~~SS~~|Y<br>~~SS~~|Y<br>~~SS~~|



IH         Hold Current-maximum current at which the device will not trip in still air at 23 ℃ . IT         Trip current-minimum current at which the device will always trip in still air at 23 ℃ . 

Imax     Maximum fault current device can withstand without damage at rated voltage (Vmax). Vmax    Maximum voltage device can withstand without damage at its rated current. 

Pd        Typical power dissipated by device when in tripped state in 23 ℃ still air environment. Rmin     Minimum device resistance at 23 ℃ . 

R1max  Maximum device resistance at 23 ℃ , 1 hour after initial device trip, or after being soldered to PCB in end application. 

**==> picture [230 x 40] intentionally omitted <==**

**----- Start of picture text -----**<br>
Eee.sige. bel SOLUTIONSPOWER  &<br>**----- End of picture text -----**<br>


Specifications subject to change without notice 

**belfuse.com/circuit-protection** 

**2** / **4** 

## Type 0ZCF Series 

**PTC’s – Basic Theory of Operation / “Tripped” Resistance Explanation** 

Fundamentally, a Bel PTC consists of a block of polymeric material containing conductive filler and bonded between two conductive, planar terminations. 

At currents below the device IHOLD rating, AND at temperatures below 100C, the PTC maintains a resistance value below its R1 MAX rating. 

As the device's temperature approaches 130C, either due to an increase in ambient temperature or a current exceeding its I TRIP rating, volumetric expansion of the filled polymer breaks apart the majority of conductive pathways across the terminals created by chain contact of adjacent filler particles or device resistance increases sharply by several orders of magnitude. 

At the much higher “Tripped” resistance, there is just enough leakage current to allow internal heating to “hold” the device in its tripped state (around 125C) until power is interrupted. Once power is removed, the PTC's core cools and contracts allowing conductive chains to reform and return the device to its low resistance state. 

The catalog data for each device specifies a "Typical Power" value. This is the power required to exactly match the heat lost by the tripped device to its ambient surroundings at 23C. By Ohm's Law, power can be stated as: W = E^2/R. Thus the approximate resistance of a “Tripped” PTC can be determined by: R = E^2/W, where "E" is the voltage appearing across the PTC (usually the supply's open circuit voltage), and "W" is the Typical Power value for the particular PTC. 

Since the PPTC acts to maintain a constant internal temperature, its apparent resistance will change based upon applied voltage and, to a lesser degree, ambient conditions. Consider the following example.... 

A PTC with a Typical Power of 1 watt protecting a circuit using a 60V supply will demonstrate an apparent, tripped resistance "R" of: 

R = 60^2/1 = 3,600 ohms 

This same tripped device when used to protect a 12V circuit would now present an apparent resistance of: R = 12^2/1 = 144 ohms 

The value for Typical Power is "typical" because any physical factors that affect heat loss (such as ambient temperature or air convection) will somewhat alter the level of power that the PTC needs to maintain its internal temperature. In short, PTCs do not exhibit a constant, quantifiable tripped resistance value. 

## **Type Time – To – Trip at 23** ℃ 

**==> picture [51 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
te oe<br>weere:ai,<br>**----- End of picture text -----**<br>


Specifications subject to change without notice 

**Bel Fuse Inc.** +1 201.432.0463 206 Van Vorst Street Bel.US.CS@belf.com Jersey City, NJ 07302 USA **belfuse.com/circuit-protection** 

© 2019 Bel Fuse, Inc. 

Rev. 0ZCF May2019 

**3** / **4** 

## Type 0ZCF Series 

**Pad Layout                                                                                Termination Pad Materials** The dimensions in the table below provide the recommended             Matte Tin – Plated Copper pad layout. 

**==> picture [237 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
P  S  W<br>Nominal  Nominal  Nominal<br>mm  Inch  mm  Inch  mm  Inch<br>5.10  0.201  2.30  0.091  5.60  0.221<br>: | ————<br>**----- End of picture text -----**<br>


## **Mechanical Dimensions and Marking** All dimensions in mm. 

|Part Number<br>~~ee~~|Dimensions|Dimensions|Marking Code|Marking Code|
|---|---|---|---|---|
||C<br>~~es~~<br>~~ee~~||“b”,IH code||
||Min<br>~~es~~|Max<br>~~ee~~|||
|0ZCF0030FF2C<br>~~ee~~<br>~~ee~~|0.60<br>~~es~~|1.15<br>~~ee~~|0030||
|0ZCF0050FF2C<br>~~ee~~<br>~~ee~~<br>~~**|**~~|0.60<br>~~es~~|1.15<br>~~ee~~|0050||
|0ZCF0075FF2C<br>~~ee~~<br>~~**|**~~|0.40|1.15|0075||
|0ZCF0075AF2C<br>~~**|**~~<br>~~ee~~|0.60<br>~~ee~~|1.15<br>~~ee~~|~~ee~~|0075<br>60<br>~~ee~~|
|0ZCF0100AF2A<br>~~ee~~|0.40<br>~~ee~~|1.70<br>~~ee~~|~~ee~~|0100<br>60<br>~~ee~~|
|0ZCF0110FF2C<br>~~ee~~|0.40<br>~~ee~~|1.00<br>~~ee~~|0110<br>~~ee~~|~~ee~~|
|0ZCF0110AF2A<br>~~es~~|0.40<br>~~ee~~|1.70<br>~~ee~~|~~ee~~|0110<br>60<br>~~ee~~|
|0ZCF0125FF2C<br>~~es~~<br>~~Re~~|0.40<br>~~ee~~|0.90<br>~~ee~~|0125<br>~~ee~~|~~ee~~|
|0ZCF0150FF2C<br>~~es~~<br>~~Re~~|0.40<br>~~ee~~|0.90<br>~~ee~~|0150<br>~~ee~~|~~ee~~|
|0ZCF0185FF2C<br>~~Re~~<br>~~—_~~<br>~~Re~~|0.30<br>~~—_~~|0.90<br>~~—_~~|0185<br>~~—_~~|~~—_~~|
|0ZCF0200FF2C<br>~~Re~~<br>~~Re~~<br>~~es~~|0.30<br>~~ee~~|0.90<br>~~ee~~|0200<br>~~ee~~|~~ee~~|
|0ZCF0200AF2C<br>~~Re~~<br>~~es~~<br>~~Re~~|0.20<br>~~ee~~|0.80<br>~~ee~~|~~ee~~|0200<br>24<br>~~ee~~|
|0ZCF0250FF2C<br>~~es~~<br>~~Re~~|0.30<br>~~ee~~|0.90<br>~~ee~~|0250<br>~~ee~~|~~ee~~|
|0ZCF0260FF2C<br>~~Re~~<br>~~a~~<br>~~re~~|0.30<br>~~ee~~|0.90<br>~~ee~~|0260<br>~~ee~~|~~eee~~|
|0ZCF0260AF2C<br>~~re~~<br>~~Rs~~|0.65<br>~~ee~~|1.15<br>~~ee~~|~~ee~~|0260<br>24<br>~~eee~~|
|0ZCF0300FF2C<br>~~re~~<br>~~Rs~~|0.40<br>~~ee ~~|0.90<br> ~~ee ~~|0300<br> ~~ee ~~|~~eee~~|
|0ZCF0300AF2C<br>~~Rs~~<br>~~es~~|0.40<br>~~ee~~|1.15<br>~~**e**e~~|~~ee~~|0300<br>15<br>~~ee~~|
|0ZCF0300BF2C<br>~~es~~<br>~~a~~|0.65<br>~~ee~~|1.15<br>~~**e**e~~<br>~~Ge~~|~~ee~~|0300<br>24<br>~~ee~~|
|0ZCF0330FF2C<br>~~es~~<br>~~Q~~<br>~~a~~|0.65<br>~~ee~~<br>~~Q~~<br>~~es~~|1.15<br>~~**e**e~~<br>~~Q~~<br>~~Ge~~|0330<br>~~ee~~|~~ee~~|
|0ZCF0400FF2A<br>~~a~~|0.40<br>~~es~~|1.50<br>~~Ge~~|0400||
|0ZCF0500FF2A<br>~~RQ~~|0.40<br>~~es~~<br>~~RQ~~|1.50<br>~~RQ~~|0500<br>~~RQ~~|~~RQ~~|
|0ZCF0600FF2C<br>~~a~~|0.40|1.70<br>~~(~~|0600<br>~~(~~|~~(~~|
|0ZCF0700FF2C<br>~~PT~~|0.30<br>~~PT~~|1.50<br>~~PT~~|0700<br>~~PT~~|~~PT~~|



## **Thermal Derating Curve Cautionary Notes** 

1. Operation beyond the specified maximum ratings or use may result in damage and possible electrical arcing and/or flame. 

2. These Polymer PTC (PPTC) devices are intended for protection against occasional overcurrent/overtemperature fault conditions and may not be suitable for use in applications where repeated and/or prolonged fault conditions are anticipated. 

3. Avoid contact of PTC device with chemical solvent.Prolonged contact may adversely impact the PTC performance. 

4. These PTC devices may not be suitable for use in circuits with a large inductance, as the PTC trip can generate circuit voltage spikes above the PTC rated voltage. 

5. These devices are intended for use in DC voltage applications only. Use in AC voltage applications should be first discussed with Bel Fuse engineering. 

6. Not recommended for use on potted or conformal coated PCB’s. Restriction of free air flow could affect electrical performance and/or result in device failure. Consult Bel Fuse engineering. 

7. MSL: 2a (According to IPC J-Std-020). 

**==> picture [205 x 38] intentionally omitted <==**

**----- Start of picture text -----**<br>
EERE » POWER<br>wtb ad<br>Oe bel SOLUTIONS &<br>**----- End of picture text -----**<br>


Specifications subject to change without notice 

**Bel Fuse Inc.** 206 Van Vorst Street Jersey City, NJ 07302 USA 

+1 201.432.0463 Bel.US.CS@belf.com **belfuse.com/circuit-protection** 

© 2019 Bel Fuse, Inc. 

Rev. 0ZCF May2019 

**4** / **4** 

## Type 0ZCF Series 

## **Environmental Specifications** 

|Temperature cycling|JESD22 Method JA-104|
|---|---|
|Biased humidity|MIL-STD-202 Method 103|
|Operational life|MIL-STD-202 Method 108|
|Resistance to solvents|MIL-STD-202 Method 215|
|Mechanical shock|MIL-STD-202 Method 213|
|Vibration|MIL-STD-202 Method 204|
|Resistance to solderingheat|MIL-STD-202 Method 210|
|Thermal shock|MIL-STD-202 Method 107|
|Solderability|ANSI/J-STD-002|
|Board flex(SMD)|AEC-Q200-005|
|Terminal strength|AEC-Q200-006|



## **Solder Reflow and Rework Recommendations** 

|Profile Feature|Pb-Free Assembly|
|---|---|
|Average Ramp-Up Rate (Tsmax to Tp)<br>Preheat :<br>Temperature Min  (Tsmin)<br>Temperature Max (Tsmax)<br>Time(tsmin to tsmax)<br>Time maintained above:<br>Temperature(TL)<br>Time (tL)<br>Peak/Classification Temperature(Tp) :   260<br>Time within 5℃of actual Peak :|3℃/second max<br>150℃<br>200℃<br>60-180 seconds<br>217℃<br>60-150 seconds<br>Peak/Classification Temperature(Tp) :   260℃|
|Temperature(tp)|20-40 seconds|
|Ramp-Down Rate :<br>Time 25℃to Peak Temperature :|6℃/second max.<br>8 minutes max|



## Solder Reflow 

Due to “lead free / RoHS 2 ” construction of these PTC devices , the required Temperature and Dwell Time in the “ Soldering ” zone of the reflow profile are greater than those used for non-RoHS devices. 

1. Recommended reflow methods; IR, vapor phase oven, hot air oven. 

2. Not Recommended For Wave Solder / Direct Immersion. 

3. Recommended paste thickness range – 0.20 – 0.25mm. 

4. Devices are compatible with standard industry cleaning solvents and methods. 

5. MSL: 2a (According to IPC J-Std-020). 

## Caution 

If reflow temperature / dwell times exceed the recommended profile, the electrical performance of the PTC may be affected. Rework: MIL-STD-202G Method 210F, Test Condition A. 

## **Standard Packaging                                   P/N Explanation and Ordering Information** 

|Part Number|Tape/ReelQty|
|---|---|
|0ZCF0030FF2C<br>Thru<br>0ZCF0075AF2C|2,000|
|0ZCF0100AF2A|1,000|
|0ZCF0110AF2A|1,000|
|0ZCF0110FF2C<br>Thru<br>0ZCF0330FF2C|2,000|
|0ZCF0400FF2A<br>0ZCF0500FF2A|1,000|
|0ZCF0600FF2C<br>0ZCF0700FF2C|2,000|



2000 or 1000 fuses in 7 inches dia. Reel, 8mm wide tape, 4mm pitch, per EIA-481(equivalent IEC-286 part 3). 

Specifications subject to change without notice 

**Bel Fuse Inc.** +1 201.432.0463 206 Van Vorst Street Bel.US.CS@belf.com Jersey City, NJ 07302 USA **belfuse.com/circuit-protection** 

© 2019 Bel Fuse, Inc. 

Rev. 0ZCF May2019