0ACH-9600-TE

Type 0ACH Fast Acting High Current Brick Fuse 

0ACH Series RoHS Compliant 

## **Features** 

- Fast acting high current brick fuse 

- Surface mount design to save space, 4.5x4.5x12.3mm physical size 

- Ceramic square body with end cap design 

- Wide operating temperature range, -40℃ to 125℃ 

- Tape & Reel for auto-insert SMD process 

- AEC-Q Compliant 

- MSL=1 

- Designed to UL248-1, 248-14 

- Fully compliance with EU Directive 2011/65/EU and amending directive 2015/863 

- Meets Bel automotive qualification* 

- - Largely based on internal AEC-Q test plan 

## **Applications** 

- High-Power Battery Systems 

- Routers 

- Blade Servers 

- Surface mount design to save space HALOGEN FREE = 

## **Physical Specifications** 

|**Physical Specifications**<br>Ss<br>7~~a~~|**Physical Specifications**<br>Materials<br>~~a~~|**Physical Specifications**<br>Body : Ceramic<br>~~a~~|
|---|---|---|
|||Cap : Silver plated copper|
|||On Fuse :|
|||"Current Rating"|
||Marking|On Label :|
|||"bel", "0ACH”, "Current Rating", "Voltage Rating", "Interrupting Rating",|
|||and "<br>","<br>"(China RoHS compliant).|



## **Electrical Characteristics                           Ratings** 

|% of Ampere<br>Rating (A)|Operating Time|Operating Time|
|---|---|---|
||Min|Max|
|100%|4hours|-|
|350%|-|10sec|



|Safety Agency|Safety Agency|Ampere  Rating /<br>Voltage Rating|Ampere Range / Volt<br>@ I.R. ability**|
|---|---|---|---|
|||60A/80V  DC*|60A/80V @ 1000A DC|
|||60-100A/72V DC<br>/63V DC|60-100A/72V @ 1000A DC<br>/63V @ 1000A DC|
|||/32V DC|/32V @ 1000A DC|
|||/125V AC|/125V @ 500A AC|



- *Internal qualification for 60A @ 80Vdc 

- **AC Interrupting Rating (Measured at designated voltage, 100% power factor random closing) 

DC Interrupting Rating (Measured at designated voltage, time constant of less than 50 microseconds,battery source) 

POWER 

Specifications subject to change without notice 

**belfuse.com/circuit-protection** 

**2** / **3** 

## Type 0ACH 

## **Electrical Specifications** 

|Part Number|Ampere<br>Rating|Voltage and Interrupting<br>Ratings|Typical Cold. Resistance<br>(mohms)|Typical Voltage Drop<br>(mV)|Typical Pre-Arcing I²t<br>(A²Sec)*|
|---|---|---|---|---|---|
|0ACH-9600-XX|60A|See Table of Ratings on<br>Page 1 for Voltage and<br>associated Interrupting<br>Ratings|0.60|75|900|
|0ACH-9800-XX|80A||0.44|65|1700|
|0ACH-K100-XX|100A||0.29|55|5000|



Consult manufacturer for other ratings 

* Typical Pre-arcing I²t are measured at 10In Current, DC battery bank, but not exceeding the interrupting rating, time constant of calibrated circuit less than 50 microseconds) 

## **Temperature Re-Rating Curve                            Average Time Current Curve** 

Normal Operating Temperature: 25 ℃± 2 ℃ 

Operating Temperature: -40 ℃ to 125 ℃ with proper correction factor applied. Chart of correction factor 

**==> picture [229 x 328] intentionally omitted <==**

**----- Start of picture text -----**<br>
Time Current Curve<br>10000<br>rra ee ee eee<br>1000 aeee<br>a WW<br>OOee<br>a ee ee ee eee<br>100 PaIel<br>_—aOOeeeI WW,Ok ee<br>10<br>SS SSSSS SSS SSSEEE<br>OOOa OW | OO<br>1 P| TE NAT<br>ee<br>—_a ee NNN<br>ee<br>0.1 | |} A AIA<br>|| ee<br>—————————————————————<br>a SS VE<br>a OO OO OO<br>ee<br>0.01 | |_| | {iiii}_ _|_{|\ Ai<br>a ee<br>_EENee SeeAT<br>0.001<br>10 100 1000<br>CURRENT IN AMPERES<br>60A 80A 100A<br>TIME IN SECONDS<br>**----- End of picture text -----**<br>


## **Soldering Characteristics** Reflow Soldering 

- Temperature: 260° C 

- Time: 30 Seconds Maximum 

Specifications subject to change without notice 

**Bel Fuse Inc.** 206 Van Vorst Street Jersey City, NJ 07302 USA 

+1 201.432.0463 Bel.US.CS@belf.com **belfuse.com/circuit-protection** 

© 2021Bel Fuse, Inc. 

Rev. 0ACH Jan15 2021 

**3** / **3** 

## Type 0ACH 

## **Fuse FGNO Explanation 0ACH - [XXXX] -XX** 

**0ACH=0ACH; [XXXX]=Ampere Rating;  XX=See Ordering Information as below** 

|Decimal|Amps|Bel FGNO[XXXX]|
|---|---|---|
|60|60|9600|
|80|80|9800|
|100|100|K100|



## **Mechanical Dimensions                                      Ordering Information** 

**==> picture [201 x 135] intentionally omitted <==**

**----- Start of picture text -----**<br>
L<br>4.50+0.20 TL _ a<br>2.70+0.20<br>*<br>Recommended pad layout | 4.7 13.8 |<br>gE<br>Ls 7<br>me 4.4 7:<br>60A-70A: Recommend trace thickness is 30z; the minimum trace width is 22mm<br>80A-100A: Recommend trace thickness is 60z; the minimum trace width is 33mm<br>**----- End of picture text -----**<br>


## **Packaging** 

|Packaging Option|Quantity|Packaging Code|
|---|---|---|
|Tape (width 24mm) and reel (dia. 13inch)|1000|TE|



WEES POWER atie.Os bel SOLUTIONSPROTECTION & 

Specifications subject to change without notice 

**Bel Fuse Inc.** 206 Van Vorst Street Jersey City, NJ 07302 USA © 2021Bel Fuse, Inc. 

+1 201.432.0463 Bel.US.CS@belf.com **belfuse.com/circuit-protection** 

Rev. 0ACH Jan15 2021