0ACG-5000-TE

## Type 0ACG 500VDC, SMD Fuse 

0ACG Series RoHS Compliant 

## **Features** 

- Surface mount design to save space 

- Ceramic tube, silver plated cap construction 

- Compatible with 260 ℃ , IR Pb-free solder process 

- Wide operating temperature range, -40℃ to 125℃ 

- Tape & Reel for auto-insert SMD process 

- MSL = 1 

- Complies with IEC 60127-7 standard 

- RoHS compliant with exemption 7(a) 

- Fully compliance with EU Directive 2011/65/EU and amending directive 2015/863 

- AEC-Q Compliant 

- Meets Bel automotive qualification* 

- - Largely based on internal AEC-Q test plan 

## **Applications** 

- Battery Management Systems, (BMS) 

- Li-ion Battery Packs 

- DC-DC Converters 

HALOGEN FREE = 

## **AEC-Q Compliant** 

## **Physical Specifications** 

Body : Ceramic Materials Cap : Silver plated copper On Fuse : "Current Rating" Marking On Label : "bel", "0ACG”, "Current Rating", "Voltage Rating", "Interrupting Rating", ~~=~~ and " ", " "(China RoHS compliant). 

## **Electrical Characteristics                           Safety Agency Approvals** 

|% of Ampere<br>Rating (A)|Operating Time|Operating Time|
|---|---|---|
||Min|Max|
|125%|1 hour|-|
|200%|-|120 sec|
|1000%||1 sec|



|Safety Agency|Ampere  Rating /<br>Voltage Rating|Ampere Range / Volt<br>@ I.R. ability**|
|---|---|---|
||1-3.15A/500V  DC<br>/350V DC<br>/350V AC<br>4-5A/450V DC<br>/125V DC<br>/350V AC|1-3.15A/500V @ 100A DC<br>/350V @1500A DC<br>/350V @ 100A AC<br>4-5A/450V @ 100A DC<br>/125V @ 1500A DC<br>/350V @ 100A AC|
|** AC Interrupting Rating (measured at designated voltage, 100% power<br>factor); DC Interrupting Rating (measured at designated voltage, time<br>constant of less than 50 microseconds,batterysource)|||



- ** AC Interrupting Rating (measured at designated voltage, 100% power factor); DC Interrupting Rating (measured at designated voltage, time constant of less than 50 microseconds, battery source) 

ERS. POWER =O 8 bel SOLUTIONS & 

Specifications subject to change without notice 

**belfuse.com/circuit-protection** 

**2** / **4** 

## Type 0ACG 

## **Electrical Specifications** 

|Part Number|Ampere<br>Rating|Alpha<br>Mark|Voltage and<br>Interrupting Ratings|Typical Cold. Resistance<br>(mohms)**|Typical Voltage Drop<br>(mV)|Typical Pre-Arcing I²t<br>(A²Sec)***|
|---|---|---|---|---|---|---|
|0ACG-1000-XX|1A|1|See Table of Ratings<br>on Page 1 for Voltage<br>and associated<br>Interrupting Ratings|220|220|0.50|
|0ACG-1250-XX|1.25A|1.25||140|210|0.95|
|0ACG-1600-XX|1.6A|1.6||90|190|2.3|
|0ACG-2000-XX|2A|2||70|185|4.1|
|0ACG-2500-XX|2.5A|2.5||40|120|2.6|
|0ACG-3150-XX|3.15A|3.15||31.5|140|3.3|
|0ACG-4000-XX|4A|4||24.5|140|5.5|
|0ACG-5000-XX|5A|5||17.5|130|11.5|



Consult manufacturer for other ratings 

** DC Cold Resistance are measured at <10% of rated current in ambient temperature of 25 ℃ 

*** Typical Pre-arcing I2t are measured at 10In Current, DC battery bank. 

## **Temperature derating curve                            Time Current Curve** 

Normal Operating Temperature: 25 ℃± 2 ℃ 

Operating Temperature: -40 ℃ to 125 ℃ with proper correction factor applied. 

Chart of correction factor 

**==> picture [22 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sb 062<br>on<br>og<br>**----- End of picture text -----**<br>


**==> picture [234 x 364] intentionally omitted <==**

**----- Start of picture text -----**<br>
Time Current Curve<br>1000<br>100<br>10<br>1 \<br>0.1 \<br>0.01 \ NN<br>0.001 “\ NX<br>1 10 100<br>Current (Amperes)<br>1A 1.25A 1.6A 2A 2.5A  3.15A  4A 5A<br>Time (Seconds)<br>**----- End of picture text -----**<br>


## REESE POWER res bel SOLUTIONS & 

Specifications subject to change without notice 

**Bel Fuse Inc.** 206 Van Vorst Street Jersey City, NJ 07302 USA 

+1 201.432.0463 Bel.US.CS@belf.com **belfuse.com/circuit-protection** 

© 2021 Bel Fuse, Inc. 

Rev. 0ACG Jul2021 

**3** / **4** 

## Type 0ACG 

## **Soldering Characteristics** 

Reflow Soldering 

- Temperature: 260° C 

- Time: 30 Seconds Maximum 

Manual Soldering (not recommended) 

- Temperature: 350° C 

- Time: 5 Seconds Maximum 

Profile Feature **Preheat & Soak Lead(Pb) free solder** Temperature min (Tsmin) 150℃ Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) 200℃ 60-120 seconds Average ramp-up rate(Tsmax to Tp) 3℃ / second max. Liquidous temperature(TL) 217℃ Time at liquidous (tL) 60 – 150 seconds Peak package body temperature (Tp) 260℃ max Time (tp) within 5℃ of the specified 30 seconds classification temperature (Tc) Average ramp-down rate(Tp to Tsmax) 6℃ / second max. Time 25℃ to peak temperature 8 minutes max. 

**==> picture [205 x 38] intentionally omitted <==**

**----- Start of picture text -----**<br>
eee POWER<br>ESS,<br>pi,OeOs [in]  bel SOLUTIONSPROTECTION &<br>**----- End of picture text -----**<br>


Specifications subject to change without notice 

**Bel Fuse Inc.** 206 Van Vorst Street Jersey City, NJ 07302 USA © 2021 Bel Fuse, Inc. 

+1 201.432.0463 Bel.US.CS@belf.com **belfuse.com/circuit-protection** 

Rev. 0ACG Jul2021 

**4** / **4** 

## Type 0ACG 

## **Fuse FGNO Explanation 0ACG - [XXXX] -XX** 

## **0ACG=0ACG; [XXXX]=Ampere Rating;  XX=See Ordering Information as below** 

|Fraction|Decimal|Amps|Bel FGNO[XXXX]|
|---|---|---|---|
||1.0|1|1000|
|1-1/4|1.25|1.25|1250|
||1.6|1.6|1600|
||2.0|2|2000|
|2-1/2|2.5|2.5|2500|
||3.15|3.15|3150|
||4.0|4|4000|
||5.0|5|5000|



## **Mechanical Dimensions                                      Ordering Information** 

**==> picture [92 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
pote<br>8<br>3 |<br>oy:<br>Recommended Pad Layout<br>**----- End of picture text -----**<br>


## **Packaging** 

|Packaging Option|Quantity|Packaging Code|
|---|---|---|
|Tape (width 24mm) and reel (dia. 13inch)|1000|TE|



Specifications subject to change without notice 

**Bel Fuse Inc.** 

+1 201.432.0463 Bel.US.CS@belf.com **belfuse.com/circuit-protection** 

206 Van Vorst Street Jersey City, NJ 07302 USA 

© 2021 Bel Fuse, Inc. 

Rev. 0ACG Jul2021