Image not available
Illustrative purposes only
0915AT43A0026001E
ANTENNA CHIP ISM 915MHZ
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: JOHANSON TECHNOLOGY
- Product type: Antennas - Single Band Chip
- SVHC: No SVHC (17-Jan-2023)
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 0.341 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026**
## **902 – 928 MHz ISM Chip Antenna**
Johanson Technology, Inc. (JTI) miniature RF ceramic chip antennas are made using Low Temperature Co-fired Ceramic (LTCC) technology which has the ability to embed low and high dielectric constants inside our antenna. This enables our components to have high detuning resilience and stability over extreme temperatures (~2ppm).
Recommended mounting locations for this antenna
PCB End PCB Corner a)
## **General Specifications[1][2]**
|**General Specifications[1] [2]**|||
|---|---|---|
|**Passband Frequency (MHz)**|**902 - 928**||
|Impedance (Ω)|50||
|Return Loss (dB)|8.5 Min.||
|Peak Gain (dBi)|-1.0 Typ.|-1.0 Typ.|
|Average Gain (dBi)|-4.0 Typ.|-4.0 Typ.|
|Average Radiated Efficiency (%) – EVB1|25||
|Average Radiated Efficiency (%)– EVB2**3**|22||
## **Maximum Ratings**
|**Maximum Ratings**||
|---|---|
|Power Capacity (W)|2 Max. (CW)|
|Operating Temperature (°C)|-40 to +85|
|Recommended Storage Conditions post-installation (°C)|-40 to +85|
||45% - 75% RH|
|Recommended Storage Conditions and Period for Unused T&R Product|+5 to +35 °C|
||18 Months Max.|
> 1 Typical value represents average measurement at 25°C. Min./Max. values represent measurements over specified operating temperature.
> 2 General specifications measured on Johanson’s evaluation board P/N 0915AT43A0026001CE1. See pages 3-4.
> 3 Measured Radiated Efficiency on Johanson’s evaluation board P/N 0915AT43A0026001CE2. See pages 5-6.
**johansontechnology.com** 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved
Doc# 36S00210 Page **1** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
**Legacy P/N: 0915AT43A0026**
## **P/N: 0915AT43A0026001E**
## **Mechanical Dimensions**
||**Inches**|**Millimeters**|
|---|---|---|
|**L**<br>**W**<br>**T**<br>**a**|0.276<br>±<br>0.008<br>0.079<br>±<br>0.008<br>0.031<br>0.020<br>±<br>0.012<br>+0.004/-0.008|7.00<br>±<br>0.20<br>2.00<br>±<br>0.20<br>0.80<br>0.50<br>±<br>0.30<br>+0.10/-0.20|
**==> picture [179 x 77] intentionally omitted <==**
**----- Start of picture text -----**<br>
Bottom view<br>a<br>W<br>L<br>**----- End of picture text -----**<br>
## **Terminal Configuration[4]**
|**Pin Number**|**Pin Number**<br>**Function**|
|---|---|
|**1**|**Feed**|
|**2**|**NC**|
**==> picture [211 x 143] intentionally omitted <==**
**----- Start of picture text -----**<br>
Side view<br>T<br>1<br>Top view<br>① ②<br>**----- End of picture text -----**<br>
> 4 The termination type is Nickel Tin. Go to: https://www.johansontechnology.com/ipcsoldering-profile for Typical Soldering Profile.
> This terminal must be soldered for anchoring and mechanical stability.
**johansontechnology.com** 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved
Doc# 36S00210 Page **2** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
**P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026**
## **Evaluation Board and Recommended Mounting Configuration 1 (P/N 0915AT43A0026001CE1)**
All units in mm
**==> picture [551 x 640] intentionally omitted <==**
**----- Start of picture text -----**<br>
40 9.5<br>50Ω Feed Line Ground Vias* Antenna Matching Network<br>20<br>GND Plane Ground Clearance<br>i | nee ee<br>C) BIG ONONONCNONS SIONS”<br>————<br>19 (can be any length)<br>*Note: Ground Vias are highly recommended to have better antenna efficiency.<br>1<br>GND Plane 8<br>5.5<br>10nH<br>50Ω GCPW 2<br>4.7pF 0.5pF<br>0.5<br>5<br>GND Plane<br>2.5<br>Antenna Matching Network<br>|<br>7<br>JTI P/Ns for Matching Network [5]<br>Capacitor (4.7pF): QSCF500Q4R7B1GV001T<br>Inductor (10nH): LRC0402CJ10NGV001T<br>Capacitor (0.5pF): QSCF500Q0R5B1GV001T<br>If you’d like the CAD PCB layout or have any questions,<br>contact our application engineers at https://www.johansontechnology.com/ask-a-question<br>5 It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when the<br>antenna is mounted on Johanson's evaluation board. The optimal matching values will vary depending on the layout, thickness, material, etc. Go to:<br>https://www.johansontechnology.com/tuning for more information.<br>Doc# 36S00210 johansontechnology.com<br>Page 3 of 9 / Revision 4.0 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166<br>Datasheet: 0915AT43A0026001E 2023 Johanson Technology, Inc. All Rights Reserved<br>**----- End of picture text -----**<br>
Doc# 36S00210 Page **3** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
**P/N: 0915AT43A0026001E**
## **Legacy P/N: 0915AT43A0026**
## **Evaluation Board Typical Return Loss Measurement (P/N 0915AT43A0026001CE1)**
**==> picture [372 x 234] intentionally omitted <==**
**----- Start of picture text -----**<br>
0<br>-5<br>m1<br>-10 m1 m 2 freq=902.0MHz<br>dB(S(1,1))=-11.217<br>-15 m2<br>freq=928.0MHz<br>-20 dB(S(1,1))=-11.807<br>m3<br>-25 freq=915.0MHz<br>dB(S(1,1))=-43.257<br>-30<br>-35<br>-40 m3<br>-45<br>0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3<br>freq, GHz<br>dB(S(1,1))<br>**----- End of picture text -----**<br>
## **Evaluation Board Typical 2D Radiation Patterns @915MHz (P/N 0915AT43A0026001CE1)**
**==> picture [531 x 326] intentionally omitted <==**
**----- Start of picture text -----**<br>
+Z (0°) +Z (0°)<br>-X +Y (90°)<br>i —. -X >> - A \ +Y (90°)<br>= “a y , ]/<br>S Py > y<br>SS a y SS Ma SS ,<br>-Y — +X (0°) w +X (90°) -Y \ 4<br>-Z -Z<br>+X +Z +Z<br>aeeee ea> aa oa —"us —~<br>2, \ / 0 m— | a, 0 \ | ~u<br>\ + _/ Lf \ UAT HK<br>: - é<br>aan . a— ee,—~ Y. eo 208,AL : 7 5 De em tee ae 4 e A- 300/ ~~ x 7TORK~ / x 7\oo<br>-Y 3rq | ==>,| | Pe —= NZ—— = eeaon } ) +Y -X 427 | — | oagel=——>srae{ies NT oe—i ee= a eeeaoa | | +X -Y am * OS+f tN eSa Ze 4 4 | 4 +Y<br>~{__ _. eh: _ + "i oe ee De<br>ne ~fwe } — ——i1 A\ \ —“‘e 159 20~Lwe —7| A\ ——“*s a)a a, ~LaA} r7o j\-\\ I isobY<br>-X -Z -Z<br>**----- End of picture text -----**<br>
**johansontechnology.com** 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved
Doc# 36S00210 Page **4** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
**P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026**
## **Evaluation Board and Recommended Mounting Configuration 2 (P/N 0915AT43A0026001CE2)**
All units in mm
**==> picture [440 x 149] intentionally omitted <==**
**----- Start of picture text -----**<br>
40 9.5<br>50Ω Feed Line Ground Vias* Antenna Matching Network<br>20<br>GND Plane<br>Ground Clearance<br>; — ——<br>CS) ICSC oN’<br>a<br>19 (can be any length)<br>**----- End of picture text -----**<br>
*Note: Ground Vias are highly recommended to have better antenna efficiency.
**==> picture [380 x 199] intentionally omitted <==**
**----- Start of picture text -----**<br>
1 0.5<br>GND Plane<br>5.5<br>5.6pF 1<br>50Ω GCPW 2<br>2.2nH<br>8<br>5.5 0.5<br>6<br>GND Plane 4<br>Antenna Matching Network<br>7.5<br>**----- End of picture text -----**<br>
JTI P/Ns for Matching Network[6] Inductor (2.2nH): LRC0402CS2N2GV001T Cap (5.6pF): QSCF500Q5R6B1GV001T
If you’d like the CAD PCB layout or have any questions,
contact our application engineers at https://www.johansontechnology.com/ask-a-question
> 6 It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when the antenna is mounted on Johanson's evaluation board. The optimal matching values will vary depending on the layout, thickness, material, etc. Go to: https://www.johansontechnology.com/tuning for more information.
**johansontechnology.com** 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved
Doc# 36S00210 Page **5** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
**P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026**
## **Evaluation Board Typical Return Loss Measurement (P/N 0915AT43A0026001CE2)**
**==> picture [381 x 223] intentionally omitted <==**
**----- Start of picture text -----**<br>
0<br>m1<br>freq=902.0MHz<br>-5 dB(S(1,1))=-13.786<br>m2<br>freq=928.0MHz<br>-10 dB(S(1,1))=-15.038<br>m1 m3<br>m 2 freq=915.0MHz<br>-15 dB(S(1,1))=-20.399<br>m3<br>-20<br>-25<br>0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3<br>freq, GHz<br>dB(S(1,1))<br>**----- End of picture text -----**<br>
## **Evaluation Board Typical 2D Radiation Patterns @915MHz (P/N 0915AT43A0026001CE2)**
**==> picture [530 x 327] intentionally omitted <==**
**----- Start of picture text -----**<br>
+Z (0°) +Z (0°)<br>-X<br>a +Y (90°) -X<br>+Y (90°)<br>i1 \ ij i<br>(‘‘ ?-/]j, - i/<br>waSS y < a s Ns 7}<br>-Y +X (0°) \NXN } +X (90°) -Y \\ JA<br>‘“~ a “47 Xqq va Y<br>-Z -Z<br>+X +Z +Z<br>A me\ 5\ |1A —__ss~~| ~~ 10, ee\| _—-—__|eee/ :x 0z ugAm\ : th| —<br>ny x | / ~< is 15, . \ / y “6 18, — \ _: ss<br>300 . +—T—-F > \s0 - ‘ x \ } x = i \ ~Y Y. x<br>a /y ATTY “a \ \ys [ x htt ‘ X \ \ =a y ATH 2 x<br>-Y nti_! | PANeNOZS 8 | ee R +Y -X iae | e TRAY,ee NS LOTTee| | +X -Y tf| PT tf BRAMRMRKETWBSNLET | |I ON +Y<br>en en eet Oe 11 | | SO ee 7/|\\ ee ee a Wh rn op Z|| \N aee ee |<br>|a 7 \_— ni aeot/ \\_— A mA ee——| ser\<br>-X -Z -Z<br>**----- End of picture text -----**<br>
**johansontechnology.com** 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved
Doc# 36S00210 Page **6** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
**P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026**
## **Recommended Mounting Configuration 3 (Evaluation Board Unavailable)**
We have conducted internal studies to show that the following corner placements provide antenna efficiency results with minimal detrimental effects.
All units in mm
**==> picture [434 x 545] intentionally omitted <==**
**----- Start of picture text -----**<br>
11<br>10<br>3<br>10 11<br>3<br>GND clearance<br>- free of metal<br>below and<br>above.<br>42 42<br>Ground Vias<br>50Ω Feed Line<br>GND Plane GND Plane<br>4 BBSaaee 26 poccesees| 26<br>1<br>8<br>GND Plane<br>1 6 1<br>50Ω GCPW 1.8<br>0.5<br>5.1<br>GND Plane<br>2.5<br> Antenna Matching Network =| [7]<br>7.1<br>If you have any questions on this layout,<br>contact our application engineers at https://www.johansontechnology.com/ask-a-question<br>**----- End of picture text -----**<br>
> 7 It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The optimal matching values will vary depending on the layout, thickness, material, etc. Go to: https://www.johansontechnology.com/tuning for more information.
**johansontechnology.com** 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved
Doc# 36S00210 Page **7** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
## **P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026**
## **Tape and Reel Specification (Units in mm)**
## **Tape Dimensions**
**==> picture [409 x 159] intentionally omitted <==**
**----- Start of picture text -----**<br>
|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Embossed Tape|A’|
|1.75 ± 0.1|
|T|D|
|PL|E|ef|
|F|
|||(|HER|BER|EER|
|C|B|A|
|A|A’|B|C|D|E|F|T|Quantity/reel|Tape material|
|4.0±0.1|4.0±0.1|2.4±0.1|7.3±0.1|2.0±0.05|5.5±0.1|12.0±0.1|1.45±0.1|1,000pcs.|Plastic (Embossed)|
**----- End of picture text -----**<br>
**==> picture [524 x 202] intentionally omitted <==**
**----- Start of picture text -----**<br>
Reel Dimensions<br>Top View Side View<br>1.4 ± 0.2<br>Label Label<br>D=13.5 ± 0.5 a n |<br>Johanson Technology, Inc.<br>Part #<br>178 ± 1<br>60 ± 1 Lot #<br>Quantity<br>Date<br>2.3 ± 0.5<br>17± 0.5<br>**----- End of picture text -----**<br>
## **Leader and Trailer Dimensions**
**==> picture [43 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
Leader End<br>**----- End of picture text -----**<br>
**==> picture [384 x 22] intentionally omitted <==**
**----- Start of picture text -----**<br>
Trailer End Empty Compartment with Cover Tape (500mm min.)<br>(160mm min.)<br>**----- End of picture text -----**<br>
**johansontechnology.com** 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved
Doc# 36S00210 Page **8** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
**P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026**
## **Orderable Part Number**
|**Packaging Style**|**Part Number**|**Termination**|
|---|---|---|
|Bulk(loosepcs.)|0915AT43A0026001B|Nickel Tin|
|T & R(7" Reel Embossed Tape)|0915AT43A0026001E(Qty: 1,000pcs./reel)||
|Evaluation Board with 1 SMA Connector|0915AT43A0026001CE1(Page 3)||
||0915AT43A0026001CE2(Page 5)||
## **Important Links**
0915AT43A0026001E Product Page
More Chip Antennas
Antenna Tuning, Optimization, and Validation Services
Soldering Information
MSL Information
Packaging Information
Recommended Storage Condition and Max Shelf Life
RoHS Compliance
## _Contact our application engineers for a PCB layout review_
**Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions.**
**johansontechnology.com** 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved
Doc# 36S00210 Page **9** of **9 / Revision 4.0** Datasheet: 0915AT43A0026001E
Updated at April 22, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →